Database Develop

phone bricked

Hello i was using this guide :
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
to root my phone i went and finished fastboot oem unlock step
the problem is after it and booted the phone i extracted the root files and clicked on it
then realized it said oem is not enabled in developer option
so now when i boot the phone a message says"Your Device is Corrupt. It can't be trusted and may not work properly."
and after it like 1-2 sec it turns off
i can still boot in bootloader
PLEASE SOME ONE HELP ME
Also it says device is unlocked in the bootloader statues code 3
extra information i was using android marshmallow 6 latest firmware

oudric said:
Hello i was using this guide :
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
to root my phone i went and finished fastboot oem unlock step
the problem is after it and booted the phone i extracted the root files and clicked on it
then realized it said oem is not enabled in developer option
so now when i boot the phone a message says"Your Device is Corrupt. It can't be trusted and may not work properly."
and after it like 1-2 sec it turns off
i can still boot in bootloader
PLEASE SOME ONE HELP ME
Also it says device is unlocked in the bootloader statues code 3
extra information i was using android marshmallow 6 latest firmware
Click to expand...
Click to collapse
The same thing happened to me when I tried to use a rootkit method for rooting the phone when it apparently knew nothing about the most recent updates (MRA58N or MRA58R). I ended up having to manual flash each individual image file from the MRA58N factory image (the flash-all script in the factory image zip wouldn't work). Even so, when I rebooted it still displayed the Your Device is Corrupt message. Then I went through the manual root process again (flashed the modified boot.img through fastboot, then flashed the latest TWRP recovery via fastboot, and then used TWRP to flash the latest SuperSU. Only then did the Your Device is Corrupt message go away and I also had root with everything else working fine.
It definitely made for an un-Godly horrible first 24-hours with my new phone! I hope this helps you.

internetpilot said:
The same thing happened to me when I tried to use a rootkit method for rooting the phone when it apparently knew nothing about the most recent updates (MRA58N or MRA58R). I ended up having to manual flash each individual image file from the MRA58N factory image (the flash-all script in the factory image zip wouldn't work). Even so, when I rebooted it still displayed the Your Device is Corrupt message. Then I went through the manual root process again (flashed the modified boot.img through fastboot, then flashed the latest TWRP recovery via fastboot, and then used TWRP to flash the latest SuperSU. Only then did the Your Device is Corrupt message go away and I also had root with everything else working fine.
It definitely made for an un-Godly horrible first 24-hours with my new phone! I hope this helps you.
Click to expand...
Click to collapse
can you please tell me steps i am so afraid to do anything to my phone now and i think my problem is same as yours
i downloaded 6.0.0 (MRA58R) and i used option in toolkit flash stock it gave me an error
"failed (data transfer failure (unknown error))

Its not so easy to brick nexus, but make sure you don't lock bootloader before your phone is working right. You can find the guide how to flash it on XDA.
You will need to flash the missing files by hand.

I was able to fix the erro i got by flashing by :
setting up environmental variable
copy all the flash files, all.bat bootloaderXXX.img... etc to platform tools folder
made sure i connected into usb 2.0 port not usb 3.0
then i flashed the stock firmware XD now my phone to point zero again

oudric said:
I was able to fix the erro i got by flashing by :
setting up environmental variable
copy all the flash files, all.bat bootloaderXXX.img... etc to platform tools folder
made sure i connected into usb 2.0 port not usb 3.0
then i flashed the stock firmware XD now my phone to point zero again
Click to expand...
Click to collapse
You don't need to move the files to the platform-tools folder.
Go to Nexus 6 General > Sticky rol-up thread > Adb and fastboot. What is it?
This will tell you how to set up and use adb or fastboot properly.

[HELP THREAD] Ask any questions [NOOB FRIENDLY]

Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!​
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing

Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.

oppili said:
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
Click to expand...
Click to collapse
Oh ****, that seems like a frustrating situation. What made the device mess up so much? Have you gone to service centres?
Regards,
PoseidonKing

Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.

oppili said:
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
Click to expand...
Click to collapse
Sorry bro, can't help you out over here in this situation.... Best of Luck regarding your device. I would suggest pm'ing a forum moderator for your issue
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing

HELP.!!Back to Stock Rom ????
I am struggling like anything to go back to stock rom. I am using Honor 4x Che1-L04 snapdragon. Pls send a link where can i find the instructions to do this. Or Better U expain.
EDIT:
Roll back to EMUI 4.0 success. Used the Hauwei update extractor and used CMD. Anyhow THANKS

NEW Problem:
How to enable ADOPTED STORAGE in honor 4x che1-L04 snapdragon edition.
In Xda they mentioned only about the kirin processor version.
Help!!!!!!!!!!

balongc52b311 after failing kangvip 6.7.1
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.

abdurrahmanzaki said:
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
Click to expand...
Click to collapse
Thanks on the update about your success on restoring your phone. Surely some poor soul will get along the same problem and your post will help him out. Sorry for the late reply btw.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing

How to Root my honor 4x Che2-L11?
Hi everyone, I'm noob, so I need a step to step guide if there's such a thing
my android version is 6.0 and EMUI 4.0
I have bootloader code for unlocking the phone, thanks in advance guys, also happy new year :good:

Phone Honor 4x (che1-L04) Stuck in fastboot mode
My phone is stuck in fastboot mode. Couldn't get the bootloader unlock key online as it requires the product id which can be obtained by dialing a number which isn't possible. I have requested directly from the customer care number and the official chat portal as well but its been more than a week and still they are asking for 24 working hours. Is there any alternative method of getting the key or atleast the Product ID?
Model name :Che1-L04
Stuck in Fastboot & Rescue mode with the bootloader locked.

I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?

oppili said:
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
Click to expand...
Click to collapse
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?

Princeshubh said:
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Click to expand...
Click to collapse
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.

I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.

SumitGupta2442 said:
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
Click to expand...
Click to collapse
no other way, unfortunatly.. one way or the other, you have to flash the zip...
ps: if you are on emui, first boot after flashing xposed will take a really long time.. mine took around 25 minutes to boot.. so dont consider it a boot loop, wait untill 30 minutes and you will be profitted

Mine was in boot screen for around 3 minutes and then rebooted into recovery. Same thing was happening again and again. So at last did the restore process from TWRP.

oppili said:
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
Click to expand...
Click to collapse
Its not working. Please help me I am still stuck....any way of installing the stock ROM back via fastboot mode with the phone showing 'Phone Locked'

Restoring TOO MUCH with twrp?
Can restoring too much with TWRP damage my phone?

jwalker9715 said:
Can restoring too much with TWRP damage my phone?
Click to expand...
Click to collapse
not really..

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

Flash Tool Error Flashing

Hi, today I tried using the Realme Flash tool for X2 Pro but it bricked my phone. Based on the flash tools error logs it shows this
"~~Medium~~ UnZipFloHelper Delete temp file exception:The process cannot access the file 'C:\Users\Michael\AppData\Roaming\realmeFlashTools\temp\system.img' because it is being used by another process."
seems like a windows problem but I cant find any reference on the web. I tried restarting my PC but it didn't solve my problem.Any suggestions how to fix this? thank you!

Realme flash tool decrypt and extract the ofp to C:\Users\Michael\AppData\Roaming\realmeFlashTools \temp .This seem to be windows permission issue .
Try to run as administer the realme flash tool and try again. Also you can flash unpacked ozip trough fastboot manually, It will be very similar to flashing with realme flash tool .

or965 said:
Realme flash tool decrypt and extract the ofp to C:\Users\Michael\AppData\Roaming\realmeFlashTools \temp .This seem to be windows permission issue .
Try to run as administer the realme flash tool and try again. Also you can flash unpacked ozip trough fastboot manually, It will be very similar to flashing with realme flash tool .
Click to expand...
Click to collapse
Thank you it worked! I tried run as admin the flash tool and deleted .IMG file it also seems that an Virtual image program is holding to it so I disabled it.

I have installed oxygen os built 4 in my x2 pro device but i didnt like the interface so i decided to return to realme ui and i have installed realme ui2.0 on my device thrugh twrp custom recovery but after install it suddenly switch off and it goes to a boot loop. now i can't enter into my recovery mode, i can't flash twrp, i can only enter in fastboot mode. please give any solution , i need my phone to back like normal...

Rinku390 said:
I have installed oxygen os built 4 in my x2 pro device but i didnt like the interface so i decided to return to realme ui and i have installed realme ui2.0 on my device thrugh twrp custom recovery but after install it suddenly switch off and it goes to a boot loop. now i can't enter into my recovery mode, i can't flash twrp, i can only enter in fastboot mode. please give any solution , i need my phone to back like normal...
Click to expand...
Click to collapse
Hi, ( if your problem is not resolved at this time )
If you want you can try this procedure
Enter fastboot
- don't know if a fastboot erase " boot + system + vendor" can help
Flash stock recovery
Enter recovery and format data
Reboot bootloader
Flash full stock rom ~5Gb ( not the OTA ~3GB) with the realme flash tool

LoVerMaKi said:
Hi, ( if your problem is not resolved at this time )
If you want you can try this procedure
Enter fastboot
- don't know if a fastboot erase " boot + system + vendor" can help
Flash stock recovery
Enter recovery and format data
Reboot bootloader
Flash full stock rom ~5Gb ( not the OTA ~3GB) with the realme flash tool
Click to expand...
Click to collapse
i have a same problem here. but i cant flash stock rom on fastboot flashing img files will loop back into bootloader and realme flash tool says "CANNOT FIND CENTRAL DIRECTORY" PLEASE HELP ME

Rinku390 said:
I have installed oxygen os built 4 in my x2 pro device but i didnt like the interface so i decided to return to realme ui and i have installed realme ui2.0 on my device thrugh twrp custom recovery but after install it suddenly switch off and it goes to a boot loop. now i can't enter into my recovery mode, i can't flash twrp, i can only enter in fastboot mode. please give any solution , i need my phone to back like normal...
Click to expand...
Click to collapse
i have a same problem here. but i cant flash stock rom on fastboot flashing img files will loop back into bootloader and realme flash tool says "CANNOT FIND CENTRAL DIRECTORY" PLEASE HELP ME

Rinku390 said:
I have installed oxygen os built 4 in my x2 pro device but i didnt like the interface so i decided to return to realme ui and i have installed realme ui2.0 on my device thrugh twrp custom recovery but after install it suddenly switch off and it goes to a boot loop. now i can't enter into my recovery mode, i can't flash twrp, i can only enter in fastboot mode. please give any solution , i need my phone to back like normal...
Click to expand...
Click to collapse
did you fix your phone?
i am at same problem here please please please answer me.
please share the procedur to fix if you have fixed

PETER.PARKER said:
i have a same problem here. but i cant flash stock rom on fastboot flashing img files will loop back into bootloader and realme flash tool says "CANNOT FIND CENTRAL DIRECTORY" PLEASE HELP ME
Click to expand...
Click to collapse
Hi,
Flashtool says some error that not relevant. If the rom is not adaptable for the phone, the error msg is not really clear.
Here is some link. I cant help you more.
You need to dl the c27.ofc (full stock rom).
rom and flash tool
ofc extractor
Option 1 try flash the c27 with flashtool.
Option 2
. Extract the ofc with MCT OFP Extractor .boot in flashboot and flash the boot/recovery (maybe try all img one by one if it pass) i use google for the correct syntax for each img file
. try boot in recovery et format data
. Reboot in fastboot and reflash the ofc with flashtool
You need to experiment to find the correct proces for your problem.
Hf gl

LoVerMaKi said:
Hi,
Flashtool says some error that not relevant. If the rom is not adaptable for the phone, the error msg is not really clear.
Here is some link. I cant help you more.
You need to dl the c27.ofc (full stock rom).
rom and flash tool
ofc extractor
Option 1 try flash the c27 with flashtool.
Option 2
. Extract the ofc with MCT OFP Extractor .boot in flashboot and flash the boot/recovery (maybe try all img one by one if it pass) i use google for the correct syntax for each img file
. try boot in recovery et format data
. Reboot in fastboot and reflash the ofc with flashtool
You need to experiment to find the correct proces for your problem.
Hf gl
Click to expand...
Click to collapse
I downloaded and flashed that c27 rom with realme flash tool it successfully completed the flashing process but nothing new it loops back into bootloader im literally pissed rigt now
Detail info about my problem "https://forum.xda-developers.com/t/...evice-state-unlocked-secure-boot-yes.4330817/"

Rinku390 said:
I have installed oxygen os built 4 in my x2 pro device but i didnt like the interface so i decided to return to realme ui and i have installed realme ui2.0 on my device thrugh twrp custom recovery but after install it suddenly switch off and it goes to a boot loop. now i can't enter into my recovery mode, i can't flash twrp, i can only enter in fastboot mode. please give any solution , i need my phone to back like normal...
Click to expand...
Click to collapse
i am facing same problem,is your problem resolved ,please help

JKD23 said:
Thank you it worked! I tried run as admin the flash tool and deleted .IMG file it also seems that an Virtual image program is holding to it so I disabled it.
Click to expand...
Click to collapse
Please tell me how you did?

General [X60 PRO+] Chinese variant - Official Stock ROM Collection

V2056A | PD2056 | 5G China variant
- PD2056B_A_1.11.13 HERE Android 11

thats good!
and how can i flash it?
My device is last week broken . is the rom flashable with fastboot? thx mike

How did you broken the device?

You can simply upload zip on device with adb command and flash by using stock recovery mode
adb push .....

I tried to flash my patched boot.img (via_magisk) with the MTKROOT V2.5.5 tool. -https://www.ayudaroot.com/root/vivo/como-rotear-los-telefonos-vivo-x60-pro-plus . The first problem was unlocking the bootloader. That did not make the tool. The tool failed .. I unlocked that manually in fastboot mode. After the bootloader was open, I tried the tool for the second time.
That was probably the serious mistake! The tool has transferred the patched boot img. So far everything was o. K. Then I booted to the Recovery Menu to clean the data and cache partition. (Factory Reset). Then restart system. Since then I have a bootloop and it was not possible to boot into recovery mode.
Then I flashed from the Indian Rom the boot and the recovery image.
Now the device booted again in Indian Recovery Mode (English). Then I tried to execute the recovery WLAN update. Unfortunately, the system has found no access points when searched.
!! F *** K !!
The next day I tried to flash the original CN-ROM with the QPST flashtool from https://www.needrom.com/download/vivo-x60-pro-plus/ ..
Here I had problems installing the Qualcomm driver for the EDL download mode or to boot the device in the EDL mode.
Without success!
Finally, I tried to flash all the items of the CN-ROM from Needrom via Fastboot. The Flash order of the items I had from the partition.xml file on the CN-ROM.
But I still have a bootloop ..
No access to the recovery WLAN Update-No networks are displayed ..
Do you have an idea for the EDL download mode?

88user88 said:
I tried to flash my patched boot.img (via_magisk) with the MTKROOT V2.5.5 tool. -https://www.ayudaroot.com/root/vivo/como-rotear-los-telefonos-vivo-x60-pro-plus . The first problem was unlocking the bootloader. That did not make the tool. The tool failed .. I unlocked that manually in fastboot mode. After the bootloader was open, I tried the tool for the second time.
That was probably the serious mistake! The tool has transferred the patched boot img. So far everything was o. K. Then I booted to the Recovery Menu to clean the data and cache partition. (Factory Reset). Then restart system. Since then I have a bootloop and it was not possible to boot into recovery mode.
Then I flashed from the Indian Rom the boot and the recovery image.
Now the device booted again in Indian Recovery Mode (English). Then I tried to execute the recovery WLAN update. Unfortunately, the system has found no access points when searched.
!! F *** K !!
The next day I tried to flash the original CN-ROM with the QPST flashtool from https://www.needrom.com/download/vivo-x60-pro-plus/ ..
Here I had problems installing the Qualcomm driver for the EDL download mode or to boot the device in the EDL mode.
Without success!
Finally, I tried to flash all the items of the CN-ROM from Needrom via Fastboot. The Flash order of the items I had from the partition.xml file on the CN-ROM.
But I still have a bootloop ..
No access to the recovery WLAN Update-No networks are displayed ..
Do you have an idea for the EDL download mode?
Click to expand...
Click to collapse
My PC is over adb unautorized, after the Factory reset...

I managed to get this full rom from Recovery, there is a option to download the full last rom and burn. I use another phone with photo google translator to navegate in the menu.

I know this option with the update from the WLAN - but this option is no longer available to me - after the search for a network is completed, no further networks are displayed. He doesn't find any networks.

And the second problem was - I cannot import this Update.zip into the main directory because the PC is unauthorized.

It wasn't just the MTK tool that was wrong.
I think our mistake was you mixed recovery and boot of another Rom. I did that many years ago with Huawei but for me it was a hard brick. Better not mix!

yes i think thatat too. first step now- i try to put the phone in EDL download mode. Then I could try the Qualcomm Flash Tool -. .. But thank you anyway.

with which command did you unlocked the bootloader? I can't find a way.

@88user88 : i wish you the best.
Do you see a way to flash the indian ROM?

Question was not for me but:
I think i have a way that works. But for that I need the command to unlock the bootloader. Because none of the normal ones works.

DPMDP said:
with which command did you unlocked the bootloader? I can't find a way.
Click to expand...
Click to collapse
+1

wolfgart said:
V2056A | PĐ2056 | Biến thể 5G Trung Quốc
- PD2056B_A_1.11.13 TẠI ĐÂY Android 11
Click to expand...
Click to collapse
hello i am a new user in vietnam, can you guide me in detail how to install . Thank you very much

I spent almost 5 hrs yesterday tried to flash from CN ROM, Origin OS to Global ROM, FunTouch OS. I used several methods including AFTool, QFIL, and QPST tool. None of them succeed.
AFTool - failed to flash because missing Fastboot batch file in the global firmware.
QFIL - failed to flash because, Qualcomm Driver 9808 not detected.
QPTS - failed to flash because, Qualcomm Driver 9808 not detected.
I like Origin OS but the reason I want to change to FunTouch OS is because Origin OS didn't come with Google Mobile Seevice package. In fact, 'Hey Google' also didn't worked out.

DPMDP said:
Question was not for me but:
I think i have a way that works. But for that I need the command to unlock the bootloader. Because none of the normal ones works.
Click to expand...
Click to collapse
OK, if we manage to restore my device, I'll give you instructions on how you can unlock your bootloader. then at least I know that in an emergency you also have the option to restore your device.
otherwise it would be too unsafe for me ...
ok?-now you come!

astrofahim said:
I spent almost 5 hrs yesterday tried to flash from CN ROM, Origin OS to Global ROM, FunTouch OS. I used several methods including AFTool, QFIL, and QPST tool. None of them succeed.
AFTool - failed to flash because missing Fastboot batch file in the global firmware.
QFIL - failed to flash because, Qualcomm Driver 9808 not detected.
QPTS - failed to flash because, Qualcomm Driver 9808 not detected.
I like Origin OS but the reason I want to change to FunTouch OS is because Origin OS didn't come with Google Mobile Seevice package. In fact, 'Hey Google' also didn't worked out. YouTube Vanced also always failed to open.
Click to expand...
Click to collapse
same here, my device is iqoo 7 cn origin os i downloaded from android 12 website, failed to upgrade in recovery mode when in hardware check.
both on funtouch os and android 12

Hi, does anyone know where it is I can find this PD2056C_A_1.14.1 firmware
the command menu of the recovery mode of the Chinese version and in Chinese or English