I was wondering if there were any ROMs for the ME176cx. I've done the rooting and trawled the internet for ROMs to no avail. I'm up for using anything or even Ubuntu touch if possible
Related
Hi, i bought a motorola milestone from ebay and was working fine so i decided to upgrade to android 2.1. now the touch panel on the phone does not work and cant find any information on how to fix this. i am getting very annoyed to the point where the phone will come in contact with the wall very hard. if anyone can please help me try and fix my amazing phone then you can contact me on here or at carter_noel at hotmail dot com. thanks guys
First, make sure you applied the right firmware update for your phone...there's several versions floating around depending on what market you live in and putting the wrong one on your phone can create issues (but usually just connection issues, not screen issues).
Did you do an Over The Air update or USB? It's possible that even if you used the right firmware, that the update wasn't applied properly, and that can cause all kinds of problems.
You can always manually re-flash it with RSD Lite via USB. Keep in mind that will wipe the phone just like a factory reset.
Very clear instructions and download links for all version of the Milestone here: http://androidforums.com/all-things-root-milestone/75460-milestone-2-1-update-root-guide.html
It's a better guide than the one here on XDA.
thank-you for replying to my problem. could it also be to do with the version of windows im using as it windows 7 64 bit but need to reinstall as loads of problems with various things including .net framework (which might be the problem?). which operating system do you or anyone reccomend to use?
Hello all,
I am not noob as I have rooted 7 android devices till yet. But this 1 is really giving me nuts. I cannot root my LG P990-hN at all.
I am on stock 2.3 rom.
Super one click root hangs terribly for 5 minutes and then gives a protocol failure error. (Tried all modes gbreak etc)
NVFlash giving me this error
Nvflash started
rcm version 0X20001
Command send failed (usb write failed)
All the drivers are properly installed as directed in forums.
I have gone through the search but didn't find the answer to it.
Any help is appreciated.
Jahanzaib353 said:
Hello all,
I am not noob as I have rooted 7 android devices till yet. But this 1 is really giving me nuts. I cannot root my LG P990-hN at all.
I am on stock 2.3 rom.
Super one click root hangs terribly for 5 minutes and then gives a protocol failure error. (Tried all modes gbreak etc)
NVFlash giving me this error
Nvflash started
rcm version 0X20001
Command send failed (usb write failed)
All the drivers are properly installed as directed in forums.
I have gone through the search but didn't find the answer to it.
Any help is appreciated.
Click to expand...
Click to collapse
use other pc
Super one click is one of many ways to root the phone: You should really have a look at this thread. It offers three different approaches to rooting with gingerbread. Speaking of which, I hope you have at least considered switching to a 4.x ROM, as it offers a much better user experience. I personally switched to the ICS bootloader with the all-in-one toolkit and flashed tonyp's CM10.1 build, it has root out of the box. You can find both in the linked thread. Good luck with it!
Use last version of SuperCharge.
Don't forget usb debugging mode.
Dear friends, I had rooted my device using AIO. There was a problem with usb drivers. Now the touch is gone no matter which rom I install. Please help me as no one is helping me here.
Hi!
My issue: My touch screen is not working, power/volume button does. I have a CM RC 10.1 ROM and used the RAZR method to root and use safestrap
*I can use the screen in safestrap
I did a ton of reading and searching and have found so far that HTC released an update that made aosp roms not work with the touch screen.
I've found people saying I need to go back to square one and return to stock to fix. I also read its a simple touchscreen firmware upgrade.
Can anyone direct me to some information that might help me figure this out? I cant seem to find anything directly addressing the issue for this particular phone model.
Bump
Hello @ all
I just rooted the tablet just like it was described in this thread: http://forum.xda-developers.com/x98-air/development/x98plusandroid5-1mirek190v1-0-rom-t3342466/page1
Everything works fine and I'm happy to have a rooted Teclast X98 plus 3G model A6C9.
So far, so good. I have some problems with figuring it out how to install TWRP, because there is one for this tablet but I'm not sure, if it would work for my specific model A6C9. If I had a working recovery, I would install several things like Viper4Android or XposedFramework....I'm not even sure, if it works with 64bit x86, but it should , because there is already a ROM from Mirek with XposedFramework and Viper4Android...
Also I would like to know, how the software is working on this tablet, because there is a normal UEFI BIOS and a Bootloader which let us to pick an OS...but there is no recovery or something else. Would be very interesting to know something new about this piece of fascinating electronics...
What should I do to install my favorite applications on this tablet?
I'm very used to Viper4Android and the XposedFramework on my old HP Touchpad which has excellent speakers and even a newer Android (Marshmallow)
I would be very happy if anyone could explain it to me how it is done and tell my something more about the Teclast X98, I would really appreciate it ????
Thanks in advance !
Any idea? No one? Come on, I don't believe that there is no one out there who doesn't know something?
Hey, dies really no one have an idea? I have problems with my su_binary also....
Hello there, I'm kinda new here (always lurking but never post something).
So, I have a Doogee X5 as a side phone and I want to root it. I'm not new in stuff like this but I'm getting some problems with this device.
First of all, I tried to install TRWP with SPFlashTool many times but I'm getting strange errors (even googling them didn't help me) so I tried more different methods like Kingroot (kek didnt even work), the way of update through setting-about phone-wireless update-local update (kinda works only on 5.1 and I'm running 6.0) and via adb.
None of these worked out, I have all the drivers installed correctly and now for some reason none of my pc (tried on 3 different pc) detect the phone, even for move media and stuff like that.
Any ideas?
Thanks in advance guys!