Related
Hi guys.
Yesterday i changed my stock rom with MoDaCo FR13 Fear Edition 6.1 27/4-11. Before doing that i root , backup and wipe the system in recovery mode. After istallation of the modaco rom i restored in recovery mode but when i reboot i got a lot of message by applications that ends their process. This happen even with another rom that i tried.
So, now i would like to restart from the beginning. How can i do that? I would like to have a clean system withouth unnecessary files and directory that now i have so i will be able to install other rom without any problems.
sndaniele said:
Hi guys.
Yesterday i changed my stock rom with MoDaCo FR13 Fear Edition 6.1 27/4-11. Before doing that i root , backup and wipe the system in recovery mode. After istallation of the modaco rom i restored in recovery mode but when i reboot i got a lot of message by applications that ends their process. This happen even with another rom that i tried.
So, now i would like to restart from the beginning. How can i do that? I would like to have a clean system withouth unnecessary files and directory that now i have so i will be able to install other rom without any problems.
Click to expand...
Click to collapse
U can flash back the original firmware that comes with your phone.
Or
Recovery and wipe your phone and flash whatever to your desire.
temasek said:
U can flash back the original firmware that comes with your phone.
Click to expand...
Click to collapse
Thanks. So I'm doing well to download this rom/firmware? http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Everything will be restored to the beginning right? Will root and recovery be lost?I don't think so, right?
sndaniele said:
Thanks. So I'm doing well to download this rom/firmware? http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Everything will be restored to the beginning right? Will root and recovery be lost?I don't think so, right?
Click to expand...
Click to collapse
Yes both root and recovery will be lost but it is easy to get root back.
I tried to install the official firmware from recovery but the result after few seconds is always: istallation aborted. WHY???? i did a wipe before!
Do you think that this guide is appropriate for my situation? http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
Will this rom restore my phone to stock situation as when i bought it?
It is more possibly your installed drivers than the firmware that causes abortion. Also it might be your PC's os. Are u on 64 bit environment?
temasek said:
It is more possibly your installed drivers than the firmware that causes abortion. Also it might be your PC's os. Are u on 64 bit environment?
Click to expand...
Click to collapse
I'm with windows 7 x64. According to you, what should i do?
sndaniele said:
I'm with windows 7 x64. According to you, what should i do?
Click to expand...
Click to collapse
I read about problems in win7 x64 in one of the threads. Can't remember where. I'm using win7 32 bit.
Either u find that post or find a way to do it on 32 bit os. Perhaps other users may have a solution for u. I have no other possible solution.
You do not have to do with the recovery, use this:
http://android.modaco.com/content/lg...5-21-20110405/
dbtomas said:
You do not have to do with the recovery, use this:
http://android.modaco.com/content/lg...5-21-20110405/
Click to expand...
Click to collapse
Hi! your link doesn't work. Is it this one? http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
Should i try it?
sndaniele said:
Hi! your link doesn't work. Is it this one? http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
Should i try it?
Click to expand...
Click to collapse
I did it but i still can't install this rom http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Code:
Installating update...
Installation aborted.
sndaniele said:
I did it but i still can't install this rom http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Code:
Installating update...
Installation aborted.
Click to expand...
Click to collapse
Do not insert the battery.Installing the Rom without the battery
dbtomas said:
Do not insert the battery.Installing the Rom without the battery
Click to expand...
Click to collapse
I tried. It's the same thing. Damn! I don't know how is possible that i cannot returtn to stock rom. I hear about driver problem...could is it? i use windows windows 7 x64.
sndaniele said:
I tried. It's the same thing. Damn! I don't know how is possible that i cannot returtn to stock rom. I hear about driver problem...could is it? i use windows windows 7 x64.
Click to expand...
Click to collapse
You may be right are the drivers, I have XP and I had no problems, I last week I installed the rom BIN_LGP990AT-00-V10b-XXX-NEU-APR-05-2011 0.
dbtomas said:
You may be right are the drivers, I have XP and I had no problems, I last week I installed the rom BIN_LGP990AT-00-V10b-XXX-NEU-APR-05-2011 0.
Click to expand...
Click to collapse
Could you link me that rom? I'm thinking to try to do it on xp.
http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
sndaniele said:
Could you link me that rom? I'm thinking to try to do it on xp.
http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
Click to expand...
Click to collapse
http://www.fileserve.com/file/WX7rBDs/BIN_LGP990AT-00-V10b-NEU-XXX-APR-05-2011+0.zip
http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
sndaniele said:
I tried. It's the same thing. Damn! I don't know how is possible that i cannot returtn to stock rom. I hear about driver problem...could is it? i use windows windows 7 x64.
Click to expand...
Click to collapse
If u intend to use xp then use the original firmwares in the earlier post which u did unsuccessfully in win7 x64. U should be fine.
Good Luck.
temasek said:
If u intend to use xp then use the original firmwares in the earlier post which u did unsuccessfully in win7 x64. U should be fine.
Good Luck.
Click to expand...
Click to collapse
I'm trying it. I will let you know...cross your fingers for me! ehehe
Guys...i'm guessing...i'm trying to install the firmware from recovery and choosing the zip file in which there are the .bin and .fls files. Is it correct right?
can i install odin on ubuntu and flash my phone?? How??
I guess Odin still is not supported on OS other than Windows. Correct me if I'm wrong. And for getting Odin worked on Ubuntu, you may need to install VirtualBox and install Windows, and access inside it.
ok it is possible to launch odin inside ubuntu using wine, but due to lack of drivers phone is pretty much undetectable, anyway the virtual machine idea is good and as far as I know about VirtualBox and VMware this might actually work
M1hai said:
ok it is possible to launch odin inside ubuntu using wine, but due to lack of drivers phone is pretty much undetectable, anyway the virtual machine idea is good and as far as I know about VirtualBox and VMware this might actually work
Click to expand...
Click to collapse
Using Wine maybe a bad idea for Odin and yes you are right without Kies (Samsung drivers) phone will not get detected. And we can't depend on Wine for 100% on all Windows applications. Some won't work correctly. And as you're aware of Virtualization technology, it might be a better plan.
is there another way to flash android phone using ubuntu? Because i am using ubuntu now
ruwie said:
is there another way to flash android phone using ubuntu? Because i am using ubuntu now
Click to expand...
Click to collapse
You have other options; Maybe you can run Windows with Odin and Kies in a Virtual Box. And there's also a lot of Windows XP portables to boot with a usb stick without change your OS ;D
I'm sorry for the bad english.
I am an ubuntu user also, I installed windows beside linux jsut to use odin.
It is possible to flash roms through linux but its little bit complicated since the only available way is using the command line (terminal)
http://wmarkito.wordpress.com/2011/...froyo-in-a-galaxy-s-with-ubuntu-and-heimdall/
El7r said:
It is possible to flash roms through linux but its little bit complicated since the only available way is using the command line (terminal)
Click to expand...
Click to collapse
Latest source for heimdall includes heimdall-frontend which is a GUI on top of the heimdall command line. I was able to build it from source very easily reading instructions from README files. Since I can't post links yet search for "Heimdall 1.3.2 Source (Github Repository)".
UPDATE: Avoid heimdall 1.3.2 as I ran into open issue 32 "Failed to confirm end of file transfer sequence, DATAFS upload failed" when flush samsung galaxy s2".
Instead use 1.3.1.
Important things to remember or else you could brick your device:
heimdall command line and heimdall-frontend are from same release or there will likely be compatibility issues.
Careful not to overwrite bootloader unless you know what you are doing
Only use heimdall firmware packages that are compatible with your device
If you found this useful I would appreciate your hitting the Thanks button below.
M1hai said:
can i install odin on ubuntu and flash my phone?? How??
Click to expand...
Click to collapse
Heimdall is the answer
Hiemdall isn't compatible with our SGM as I heard so I don't try it to not brick my phone.
The only way is to modify the ROM and make it CWM flashable.. how? I don't know! If you know please teach me.
Sent from my GT-S5570 using XDA
Heimdall 1.3.2 has issue 32, use 1.3.1
farrukhnajmi said:
Latest source for heimdall includes heimdall-frontend which is a GUI on top of the heimdall command line. I was able to build it from source very easily reading instructions from README files. Since I can't post links yet search for "Heimdall 1.3.2 Source (Github Repository)".
...
If you found this useful I would appreciate your hitting the Thanks button below.
Click to expand...
Click to collapse
I was trying to root my phone using step 2 of "[GUIDE] How to Flash Custom Binaries Without Ever Incrementing the Flash Counter!!" and ran into heimdall's issue 32 ""Failed to confirm end of file transfer sequence, DATAFS upload failed" when flush samsung galaxy s2". Reverted to 1.3.1 and all was well. So you may want to avoid 1.3.2.
---------- Post added at 08:44 AM ---------- Previous post was at 08:25 AM ----------
Anass Ahmed said:
Hiemdall isn't compatible with our SGM as I heard so I don't try it to not brick my phone.
The only way is to modify the ROM and make it CWM flashable.. how? I don't know! If you know please teach me.
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
First, I just discovered "[GUIDE] How to Flash Custom Binaries Without Ever Incrementing the Flash Counter!!" on this forum (threadid =1311081). That was incredibly valuable. I used step 2c using Heimdall. If Heimdall is not an option for your device then would either 2a or 2b work for you (it wont if you are on UCKK6). If they wont either then all I can think of is to do 2c like me but instead of heimdall use ODIN using a friend's Windows machine or running a windows virtual machine like VirtualBox, VmWare etc. with USB support. Note that I have not tried this option and cannot vouch that it works. Perhaps someone else can? Best of luck and please click Thanks button below my post if you found this useful.
odin in ubuntu
https://launchpad.net/ubuntu/+source/odin
In Terminal:
Code:
sudo apt-get install odin
correction
G.O.D said:
Heimdall is the answer
Click to expand...
Click to collapse
its not the answer unless an s3 or older used the s6 pit cannot even be retrieved by jodin for example and the only way to root marshmallow is off the odin bootloader FACT
anyone know where i can get the pit file for the sm-j327p? I had somenoe access my phone and delete everything so i have no pit file which I am assuming is needed to setup the partitions.
Hi Guys!
So I got my hands on an HTC One Mini 2 Demo Unit. Don't ask me how or why. (NOT STOLEN!)
I have tried to get rid of the Demo mode app but without success.
This is what I have done:
Unlocked the bootloader
Flashed TWRP
This is what I have tried to do to get rid of the demo mode:
Wiping and factory reset from TWRP. About 1 minute after the phone has booted it autoinstalls the Demo Mode again. Before it does all functions is available etc, after the demo mode is installed some options and functions is disabled.
Rooted, Installed Xposed and module BootManager to stop Demo Mode from booting, no success the demo app still starts upon boot
Tried to uninstall the app with various root uninstallers, they just fail.
Tried wiping ALL partitions etc from TWRP and restored an original HTC One Mini 2 system dump from another thread, same thing. After about one minute the Demo application autoinstalls itself and some functions is diabled and the annoying demo mode starts now and then, and blinkfeed is full of sh*t, demo contacts etc.
After I reboot all settings etc is restored to it's original state.
Any ideas how I can force the phone not to install the demo mode after reset?
Thanks!
Update: Flashing the Cyanogenmod firmware from another thread does not install the demo mode and the phone works as it should. I can call etc. But I only have 3G not 4G, don't know if it has to do with the sim or not (borrowed a nano-sim from a collegues iPhone 5s).
But anyhow I would like to have the HTC firmware instead, any ideas?
Maybe someone has another system dump/ruu/firmware or any of the sort I can try. Perhaps the firmware I tried in the other thread also was a demo-firmware (http://forum.xda-developers.com/showpost.php?p=55107684&postcount=6)
B3t4 said:
Update: Flashing the Cyanogenmod firmware from another thread does not install the demo mode
Click to expand...
Click to collapse
As you probably figured it was an app in the ROM so installing a custom ROM or reverting back to stock will get rid of the problem (as you've already done it)
yourmate said:
As you probably figured it was an app in the ROM so installing a custom ROM or reverting back to stock will get rid of the problem (as you've already done it)
Click to expand...
Click to collapse
Thank you for your answer. I have however tried to restore the original ROM and another original dump from this forum but the app installs itself anyway. Any idea where I can get another clean ROM or system dump?
B3t4 said:
Thank you for your answer. I have however tried to restore the original ROM and another original dump from this forum but the app installs itself anyway. Any idea where I can get another clean ROM or system dump?
Click to expand...
Click to collapse
I'd unlock it first on htcdev and then root and flash a custom recovery.
Then you'd either flash back to stock or flash a custom ROM.
I hope this helps
yourmate said:
I'd unlock it first on htcdev and then root and flash a custom recovery.
Then you'd either flash back to stock or flash a custom ROM.
I hope this helps
Click to expand...
Click to collapse
As stated in the OP I have already unlocked the bootloader and flashed a custom recovery. CyanogenMod works but very buggy build, and either way I would like to have the original ROM or something close to it (Sense). Unfortunately there are no custom roms for this phone yet (other then CM). I have only found one original TWRP dump that I tried but the demo mode installed itself on that dump as well. I don't know why it installed itself on the original rom from this forum... Thanks
B3t4 said:
As stated in the OP I have already unlocked the bootloader and flashed a custom recovery. CyanogenMod works but very buggy build, and either way I would like to have the original ROM or something close to it (Sense). Unfortunately there are no custom roms for this phone yet (other then CM). I have only found one original TWRP dump that I tried but the demo mode installed itself on that dump as well. I don't know why it installed itself on the original rom from this forum... Thanks
Click to expand...
Click to collapse
Sorry, my bad.
My understanding is that this is an app so if it's not in the ROM then it cannot run.
There are a few other custom ROM but if you want stock follow this by the letter.
yourmate said:
Sorry, my bad.
My understanding is that this is an app so if it's not in the ROM then it cannot run.
There are a few other custom ROM but if you want stock follow this by the letter.
Click to expand...
Click to collapse
Those instructions and ROMs are for the HTC One Mini and not the HTC One Mini 2. Also as far as I know there is no way to get S-OFF on the HTC One Mini 2 yet.
B3t4 said:
Those instructions and ROMs are for the HTC One Mini and not the HTC One Mini 2. Also as far as I know there is no way to get S-OFF on the HTC One Mini 2 yet.
Click to expand...
Click to collapse
Mini 2 works the very same way (obviously with its own ROM)
Do some digging
yourmate said:
Mini 2 works the very same way (obviously with its own ROM)
Do some digging
Click to expand...
Click to collapse
Thanks! I will give it a try, does not matter if I brick it anyways. My fiance dropped it and broke the glass so I will get a new demo unit.
B3t4 said:
Thanks! I will give it a try, does not matter if I brick it anyways. My fiance dropped it and broke the glass so I will get a new demo unit.
Click to expand...
Click to collapse
wow
I've flashed one two weeks ago (although not a demo unit but it was branded) it works OK
Changed several LCDs on Minis but not on Mini 2 yet.
Btw how much are the demo ones?
yourmate said:
wow
I've flashed one two weeks ago (although not a demo unit but it was branded) it works OK
Changed several LCDs on Minis but not on Mini 2 yet.
Btw how much are the demo ones?
Click to expand...
Click to collapse
What ROM/Backup did you use?
For me, free but can't tell the source. :good:
B3t4 said:
What ROM/Backup did you use?
For me, free but can't tell the source. :good:
Click to expand...
Click to collapse
So why don't you send two over and I'll do it and send you one back?
B3t4 said:
For me, free but can't tell the source. :good:
Click to expand...
Click to collapse
yourmate said:
So why don't you send two over and I'll do it and send you one back?
Click to expand...
Click to collapse
I've thought so that the conversation will dry out indeed
yourmate said:
I've thought so that the conversation will dry out indeed
Click to expand...
Click to collapse
Sorry I don't have permission to do that from my source.
I'll try to get some time over and try your suggestion, will get back with results.
did you have any luck removing the demo apps from the demo device, i also stuck with one
dest1 said:
did you have any luck removing the demo apps from the demo device, i also stuck with one
Click to expand...
Click to collapse
Download stock rim flashable via twrp and open it using WinZip or winrar goto system/etc/ and delete '.demo' folder. Then repack and flash, problem solved.
no need for reading the whole thread. in twrp mount preload and by using the twrp file manager navigate to /preload and delete everything you can find inside! do a factory reset and flashing "org" firmware should be done...
hypafly said:
Download stock rim flashable via twrp and open it using WinZip or winrar goto system/etc/ and delete '.demo' folder. Then repack and flash, problem solved.
Click to expand...
Click to collapse
I was going to do same thing, but how do you repack ? I mean I packed it with WinRAR, or 7Zip, but they compress the file, or maybe they don't pack it as TWRP format, so TWRP didn't recognise my file. Simply, how do you pack it ?
Ven99 said:
I was going to do same thing, but how do you repack ? I mean I packed it with WinRAR, or 7Zip, but they compress the file, or maybe they don't pack it as TWRP format, so TWRP didn't recognise my file. Simply, how do you pack it ?
Click to expand...
Click to collapse
Open the zip file that you want to flash with any zip manager you like, you don't need to extract the files, just navigate to the folder and delete the .demo folder and it will automatically repack it. Close it and copy it to your phone and flash normally. It will work.
I grabbed the ROM from here:
http://www.jide.com/remixos/devices/tecalstx98
But unfortunately, there is no flash.xml inside. Check contents in the attached screenshot. Any ideas?
Eneekay said:
I grabbed the ROM from here:
http://www.jide.com/remixos/devices/tecalstx98
But unfortunately, there is no flash.xml inside. Check contents in the attached screenshot. Any ideas?
Click to expand...
Click to collapse
Try to download Mirek190 ROM, bring all Remix files in that folder by replacing original...And flash it.
I'm not responsible about it, but I tested a ROM of another tab in the same way.
Ps: it's just RemixOS 1.0.
Maxximo88 said:
Try to download Mirek190 ROM, bring all Remix files in that folder by replacing original...And flash it.
I'm not responsible about it, but I tested a ROM of another tab in the same way.
Click to expand...
Click to collapse
Thank you very much for the reply! I used the missing files from the Remix 1.0 x98 3G ROM, but had no luck - the files were not recognized.
I found a forum in Chinese, at Jide, in which someone was commenting on the same problem. I used that flash.xml, but ended in a boot loop, so I reverted to guvnor's ROM.
I also tried with the files from guvnor's ROM, but the files were not recognised by the Intel Manufacturing Tool (sorry, I don't remember the exact error message, but I think it was some incompatibility between the files from Remix and that flash.xml). I guess I need a ROM-specific flash.xml, but have not idea how to produce one.
Btw, I have the M5C5 model, single-boot Android, and I am on guvnor's ROM.
Maxximo88 said:
Ps: it's just RemixOS 1.0.
Click to expand...
Click to collapse
Do you mean it is not worth it?
I would definitely be more interested in the x86 2.0 ROM, however I saw you had problems with inverted touch input etc... And I suppose we won't be getting anything from Teclast and Jide!
my mobile is che2-l11 marshmello and rooted with magisk then i separated sd card to ext4 and exfat then download app2sd the problem and the fault is that i link system apps to externel so it restart alone and then go to stuck at honor logo only pls anyone have an idea assist me
Kireto00 said:
my mobile is che2-l11 marshmello and rooted with magisk then i separated sd card to ext4 and exfat then download app2sd the problem and the fault is that i link system apps to externel so it restart alone and then go to stuck at honor logo only pls anyone have an idea assist me
Click to expand...
Click to collapse
It might be best to re-install your firmware. Also why did you linked system apps?
Your explanation is bit difficult to understand, could you maybe give a more detailed explanation or would you want step by step guide to help you with rooting and configurating apps2sd? You seem to be having lot of problems with getting apps2sd working as wanted.
keikari said:
It might be best to re-install your firmware. Also why did you linked system apps?
Your explanation is bit difficult to understand, could you maybe give a more detailed explanation or would you want step by step guide to help you with rooting and configurating apps2sd? You seem to be having lot of problems with getting apps2sd working as wanted.
Click to expand...
Click to collapse
i am already rooted and have twrp working and i wipe every thing as u say then i do all ur replys but it not working but i do all with marshmello update.app only might i try with kitkat ?? thait marshmello might be corrupt as u say ??
Kireto00 said:
i am already rooted and have twrp working and i wipe every thing as u say then i do all ur replys but it not working but i do all with marshmello update.app only might i try with kitkat ?? thait marshmello might be corrupt as u say ??
Click to expand...
Click to collapse
To get past honor logo you need to re-install whole firmware, because most likely system partition has something that prevents boot or boot partition has problem.
I'm using marsmallow and Apps2SD works normally for me. I don't think it matters which version you are using, but getting back to kitkat might be difficult.
keikari said:
To get past honor logo you need to re-install whole firmware, because most likely system partition has something that prevents boot or boot partition has problem.
I'm using marsmallow and Apps2SD works normally for me. I don't think it matters which version you are using, but getting back to kitkat might be difficult.
Click to expand...
Click to collapse
u can tell me what i must do now and i will do ........ but i wipe all thing on sd card and system its say no os found as no system found so what i do i think kitkat it will not be difficult because as no system is in software
Kireto00 said:
u can tell me what i must do now and i will do ........ but i wipe all thing on sd card and system its say no os found as no system found so what i do i think kitkat it will not be difficult because as no system is in software
Click to expand...
Click to collapse
I've read from somewhere that it isn't as easy as it looks like(though I haven't tested it myself). I think it's because there are partitions which you can't flash in fastboot and the "updateflasher.zip" thread says that method only works on android LP and MM.
I can guide you with apps2sd, but if you root with magisk I can't help if problem is somehow related to it since I have never used it.
keikari said:
I've read from somewhere that it isn't as easy as it looks like(though I haven't tested it myself). I think it's because there are partitions which you can't flash in fastboot and the "updateflasher.zip" thread says that method only works on android LP and MM.
I can guide you with apps2sd, but if you root with magisk I can't help if problem is somehow related to it since I have never used it.
Click to expand...
Click to collapse
u mean that u dont know what to do now ??
Kireto00 said:
u mean that u dont know what to do now ??
Click to expand...
Click to collapse
No, I meant to say that you should install firmware you want, and any root method you want. And then your device should boot normally.
keikari said:
No, I meant to say that you should install firmware you want, and any root method you want. And then your device should boot normally.
Click to expand...
Click to collapse
ok i need the method ??
Kireto00 said:
ok i need the method ??
Click to expand...
Click to collapse
Well I prefer this method https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 chapter 8 is rootin.
Actually needed steps are:
1. Flash 1.zip
2. Flash SuperSu.zip can be found from here https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
3. Make sure it says "installing mode system-less" or something similiar.
4. Reboot your phone. It will boot loop once or twice and then works normally.
Then I can help you with apps2sd if you still want.
keikari said:
Well I prefer this method https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 chapter 8 is rootin.
Actually needed steps are:
1. Flash 1.zip
2. Flash SuperSu.zip can be found from here https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
3. Make sure it says "installing mode system-less" or something similiar.
4. Reboot your phone. It will boot loop once or twice and then works normally.
Then I can help you with apps2sd if you still want.
Click to expand...
Click to collapse
i am honor 4x this is the first then there is no system for my device i delete it its says no os installed when i boot so i need a method to instal a new frimware not rooting it
Kireto00 said:
i am honor 4x this is the first then there is no system for my device i delete it its says no os installed when i boot so i need a method to instal a new frimware not rooting it
Click to expand...
Click to collapse
Oh my bad I thought you already knew about this but here https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
You can also use it to install p8lite rom which has EMUI 4.1 if you want. Though you can't use OTG feature then. There seems to be fix posted for it, but it didn't work for me.
keikari said:
Oh my bad I thought you already knew about this but here https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
You can also use it to install p8lite rom which has EMUI 4.1 if you want. Though you can't use OTG feature then. There seems to be fix posted for it, but it didn't work for me.
Click to expand...
Click to collapse
i use this method for marshmello and dont work
Kireto00 said:
i use this method for marshmello and dont work
Click to expand...
Click to collapse
Can you tell exactly what you did, also which firmware you are installing like b310 or b360. And what error did it gave you. I've used this method a lot to fix my phone when done something wrong and always worked without problem.
keikari said:
Can you tell exactly what you did, also which firmware you are installing like b310 or b360. And what error did it gave you. I've used this method a lot to fix my phone when done something wrong and always worked without problem.
Click to expand...
Click to collapse
ok now i separate my sd card as well known then i link system apps so when i restart there is no system to boot to it so it stuck at honor logo so i want a method in a step by step to repair it....the error is
E: could not extract ' meta.inf /com/google/android /update-binary
error installing zip file '/externel -sd / lost.dir / meta.inf zip
with red colour
my base is marshmello
Kireto00 said:
ok now i separate my sd card as well known then i link system apps so when i restart there is no system to boot to it so it stuck at honor logo so i want a method in a step by step to repair it....the error is
E: could not extract ' meta.inf /com/google/android /update-binary
error installing zip file '/externel -sd / lost.dir / meta.inf zip
with red colour
my base is marshmello
Click to expand...
Click to collapse
Can you give link to where you downloaded your firmware and which version it was? This is very weird because no one else hasn't has problem like that.
keikari said:
Can you give link to where you downloaded your firmware and which version it was? This is very weird because no one else hasn't has problem like that.
Click to expand...
Click to collapse
the problem he got because the meta-inf folder is corrupt.]
miststudent2011 said:
the problem he got because the meta-inf folder is corrupt.
Click to expand...
Click to collapse
I guess he should then try to re-download updateflasher.zip. Right?
keikari said:
I guess he should then try to re-download updateflasher.zip. Right?
Click to expand...
Click to collapse
Yes he should do it.
He was having unstable internet connection previously while he requested my help.
@Kireto00
redownload the zip file from the link i provided now and repeat the process ie.., unpacking and repacking the two zip files and give a try.
I strongly believe that either the zip downloaded is corrupt or while rezipping the file you might have faced the error.