Related
Welcome to the support thread of EternityProject's CM10.1 (CM10.1 EPRJ)!
[ROM]EternityProject's CyanogenMod 10.1 for LG Optimus 4X HDhttp://forum.xda-developers.com/showthread.php?t=2123602
What is this thread for:
Here you can report all your problems of the EternityProject's CM10.1 ROM that you have and ask for help to see if it's solvable by others methods that doesn't include posting to the original rom thread.
This thread will be easier for him than look for all reports spreaded in the many pages of his thread, but remember, avoid flood!
Before adding your problem(s):
- Be sure to use the latest version of CM10.1!
- Be sure that your report is not already reported by someone, so use the search button.
FAQ:
Q: I'm getting low scores on AnTuTu and Quadrant. What can I do?
A: Disable "Use GPU for 2d apps" under development settings.
Q: How can I open development settings?
A: In About Phone > Settings, press Build Number 8 times.
Let's help kholk and dexter build a stable CM10.1. Thank them!!
BUG LIST:
Confirmed
- Hotspot (doesn't work for both secured or open settings, wifi is stuck at OFF state after attempt to turn on hotspot, work again after reboot) (kholk)
- extsd (root permission is denied) (kholk)
- swipe gesture in aosp keyboard FC keyboard (BUT normal typing has no problem) (kholk)
- mic on Google Now FC the app (kholk)
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (o4i, musklor and Capozz)
- Bluetooth not really working (kholk)
- External SD is accessible only as root (kholk)
- I forgot to enable mass storage mode, so only adb is working. I'll enable it in the next release. (kholk)
- Hotspot can't still work because I didn't even configure it. I'll be sincere: I totally forgot to xD (kholk)
- Dear kholk, you forgot to include a library called libnvcap_video.so: why the hell did you? (kholk)
- installation of purchased apps from market fails (NEW)
Needs confirmation
- No option for USB connection mode (Mikey94)
- Camera no autofocus when hitting the trigger (Mikey94)
- Apps that try to install itselves to the sd card fail miserably, probably related to sdcard access. Some failing apps: Fancy widgets unlocker, ADWLauncher Ex, Exchange by TouchDown Key (ircalf)
- When connected to a wi-fi with no internet connection, mobile data doesn't take over, leaving the phone offline (ircalf)
Fixed
- Vibration (kholk)
- root doesn't work (kholk)
- NFC (the option is not present under settings) (kholk)
- Screen brightness changes inadvertently (still can't point out the reason or pattern) (ircalf)
- Leaving the brigthness to auto renders the screen very dark (ircalf)
TIPS:
- This build is still BETA. So you can, and probably will, find bugs. If so, please report here so I can update this thread and make Kholk's life easier.
- http://forum.xda-developers.com/showpost.php?p=37342594&postcount=79
- No NFC in settings (always activated??)
- No option for USB connection mode
- Camera no autofocus when hitting the trigger
all from kholk:
29/01/2013: Bluetooth not really working
29/01/2013: External SD is accessible only as root
- I forgot to enable mass storage mode, so only adb is working. I'll enable it in the next release.
- Hotspot can't still work because I didn't even configure it. I'll be sincere: I totally forgot to xD
- Dear kholk, you forgot to include a library called libnvcap_video.so: why the hell did you?
Re: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
Why no developer settings?
Sent from my LG-P880 using xda app-developers app
Question: Is it best to install this over a fresh kdz or will installing it over CustoNexus work just as well once cache/data/etc. are wiped in recovery?
Emin3ms said:
Why no developer settings?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
From Dexter_nlb: "in about phone settings, press build number 8 times"
AlderCass said:
Question: Is it best to install this over a fresh kdz or will installing it over CustoNexus work just as well once cache/data/etc. are wiped in recovery?
Click to expand...
Click to collapse
Idk, I installed from my kdz.
For Kholk: 3G network does not work (provider Wind, Italy)
AW: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
I have a big Problem with mobile data and mobile connection!
My provider is three (3 Austria) and problem is following (same problem was also with dexters rom): the signal is kinda low, my phone automatically connect to t-mobile austria...and at the statusbar there is a "R" which stands for roaming, so there is no more internet connection!
With stock V10H i never had this problem!
Any solutions? am i the only person with this problem?
Sent from my LG-P880 using xda app-developers app
Anyone else having trouble reinstalling previously purchased apps? I get an error something along the lines of "cannot install to usb storage or SD card", and it only happens on my purchased apps, no problems installing any free apps. I Googled the error and none of the answers (of which there were a few) worked, such as clearing cache/data for the Google Play app, or installing the apps while the SD card is unmounted, another proposed solution is to delete smdl2tmp1.asec which I can't get at because I can't get root working yet
Speaking of root, superuser's info screen is reporting "note: your su binary cannot be updated due to its location"
Also, I've figured out how to add/remove lock screen widgets but I can't figure out how to get rid of the camera one? -edit- got rid of the lock screen camera with an app called Lockscreen Policy
SD card doesn't seem to be recognised at all (see attachment), tried unmounting and remounting, removing and reinserting, rebooting, no luck
Recovered CustoNexus for regular day's use tomorrow, will do some more "constructive breaking" of CM10.1 tomorrow evening.
AlderCass said:
Anyone else having trouble reinstalling previously purchased apps? I get an error something along the lines of "cannot install to usb storage or SD card", and it only happens on my purchased apps, no problems installing any free apps. I Googled the error and none of the answers (of which there were a few) worked, such as clearing cache/data for the Google Play app, or installing the apps while the SD card is unmounted, another proposed solution is to delete smdl2tmp1.asec which I can't get at because I can't get root working yet
Speaking of root, superuser's info screen is reporting "note: your su binary cannot be updated due to its location"
Also, I've figured out how to add/remove lock screen widgets but I can't figure out how to get rid of the camera one? -edit- got rid of the lock screen camera with an app called Lockscreen Policy
SD card doesn't seem to be recognised at all (see attachment), tried unmounting and remounting, removing and reinserting, rebooting, no luck
Recovered CustoNexus for regular day's use tomorrow, will do some more "constructive breaking" of CM10.1 tomorrow evening.
Click to expand...
Click to collapse
It's a known bug. We have to wait kholk's release a new build.
Another bug:
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (T-Mobile PL)
Re: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
The alarm clock just rang 2 timessage and softbrick the phone, needing to refresh kdz, then I noticed a huge battery drain from this issue.
Enviado desde mi LG-P880 usando Tapatalk 2
AW: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
AlderCass said:
Anyone else having trouble reinstalling previously purchased apps? I get an error something along the lines of "cannot install to usb storage or SD card", and it only happens on my purchased apps, no problems installing any free apps. I Googled the error and none of the answers (of which there were a few) worked, such as clearing cache/data for the Google Play app, or installing the apps while the SD card is unmounted, another proposed solution is to delete smdl2tmp1.asec which I can't get at because I can't get root working yet
Speaking of root, superuser's info screen is reporting "note: your su binary cannot be updated due to its location"
Also, I've figured out how to add/remove lock screen widgets but I can't figure out how to get rid of the camera one? -edit- got rid of the lock screen camera with an app called Lockscreen Policy
SD card doesn't seem to be recognised at all (see attachment), tried unmounting and remounting, removing and reinserting, rebooting, no luck
Recovered CustoNexus for regular day's use tomorrow, will do some more "constructive breaking" of CM10.1 tomorrow evening.
Click to expand...
Click to collapse
I had that problem about the smdl2tmp1.asec ony galaxy ace. I had no root and I could only delete it when I connected to the over and deleted it there! I don't know if you can connect to the over yet,but it helped me!
Sent from my LG-P880 using xda app-developers app
o4i said:
Another bug:
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (T-Mobile PL)
Click to expand...
Click to collapse
Same bug with Dexter's ROM
good job, will try this rom soon, still newbie at android.:victory:
o4i said:
Another bug:
-Phone doesn't automatically registers into mobile network on pin-locked simcard, I have to go into settings > mobile operators, perform manual search and choose corrent operator, then it works, after reboot i have to do same steps again. (T-Mobile PL)
Click to expand...
Click to collapse
Same problem here
Is it right that i have to enable WIFI for 3G Network?
Where can i find the Sync settings?
R: [FAQ] Support thread for CM 10.1 by kholk! Questions? Post here!
Battery is at 67% after 2 hours of use (it was fully charged after booting this morning)
Sent from my LG-P880 using xda app-developers app
- Apps that try to install itselves to the sd card fail miserably, probably related to sdcard access. Some failing apps: Fancy widgets unlocker, ADWLauncher Ex, Exchange by TouchDown Key
- When connected to a wi-fi with no internet connection, mobile data doesn't take over, leaving the phone offline
- Screen brightness changes inadvertently (still can't point out the reason or pattern)
- Leaving the brigthness to auto renders the screen very dark
ircalf said:
- Apps that try to install itselves to the sd card fail miserably, probably related to sdcard access. Some failing apps: Fancy widgets unlocker, ADWLauncher Ex, Exchange by TouchDown Key
- When connected to a wi-fi with no internet connection, mobile data doesn't take over, leaving the phone offline
- Screen brightness changes inadvertently (still can't point out the reason or pattern)
- Leaving the brigthness to auto renders the screen very dark
Click to expand...
Click to collapse
I think light sensor is bugged.
Unofficial CyanogenMod 10.2 for the Kindle Fire HD 8.9 LTE
THIS THREAD IS SPECIFIC TO THE LTE VARIANT OF THE KINDLE FIRE HD 8.9". IF YOU HAVE A STANDARD 8.9" MODEL USE THIS THREAD:
http://forum.xda-developers.com/showthread.php?t=2388352
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
**** I DO NOT OWN THE LTE VARIANT OF THE KINDLE FIRE HD 8.9", SO THIS ROM WILL BE A WORK IN-PROGRESS. IF YOU'RE THE EASILY FRUSTRATED TYPE, YOU MAY WANT TO HOLD OFF. ****
BEFORE YOU BEGIN MAKE SURE YOU HAVE A 2ND-BOOTLOADER INSTALLED CORRECTLY AND CAN SEE THE BLUE LOGO DURING BOOTUP:
http://forum.xda-developers.com/showthread.php?t=2128175
LTE MODEL Download Information:
[LATEST][08/07 #3] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jemlte/cm10.2/cm-10.2-20130807-UNOFFICIAL-jemlte.zip
md5sum: d499384a940dffb3ca7e6ac512fcf370
Older builds can be found in the same folder on goo.im:
http://goo.im/devs/Hashcode/jemlte/cm10.2/
Download Google Apps:
http://goo.im/devs/Hashcode/gapps
(For Android 4.3)
PLEASE BE SURE TO WIPE SYSTEM & DATA/CACHE (FACTORY RESET) WHEN COMING FROM AMAZON STOCK SOFTWARE.
(It's the "Wipe" button and then "System" and then "Factory Reset" button in TWRP -- this does NOT clear your sdcard space)
Be aware that the "sdcard" space has changed slightly from ICS to JB4.2. You will find your stock amazon OS files in /data/media/ or "sdcard" on the Stock OS. But CM10.1 will create a sub directory "/data/media/0" and call that "sdcard". And in TWRP it will also use "data/media/0" as "sdcard". This has to do with multi-user settings. So when placing files on the "sdcard" be sure to check both locations before wondering why that file is missing.
CHANGES:
[08/04] First CM10.2 build for Jem LTE
[07/31] Added RIL setup for LTE
[07/31] First CM10.2 build for Jem
FEATURES:
3.0.50 kernel (up from a stock 3.0.21 kernel). This includes updates from Texas Instruments, Google and Kernel.org.
PowerVR Graphics Drivers: DDK [email protected] for Android (Jellybean compatible)
Updated bltsville libs to 2.2.2.0 (this is partial screen update code which enables smoother / faster screen draws)
Audio
Camera
Wifi
Bluetooth
Sensors
HWAcceleration
HD Codecs for YouTubeHD and Netflix
HDMI video out is now correct and work across several resolutions. YMMV
DEVS
BUILDING THIS ROM:
First, read through Google's Android website about "how to setup a build environment":
http://source.android.com/source/initializing.html
[ COMING SOON ]
SCREEN SHOTS:
FOR BUGS / TROUBLESHOOTING:
I need the output from:
adb logcat -b radio > logcat-radio.txt
SAME BUGS AS THE STANDARD VERSION OF KINDLE FIRE HD 8.9"
CURRENT KNOWN ISSUES:
Benchmarks are quite LOW at the moment due to lack of bionic optimizations for OMAP in 4.3. This will probably get worked out over time. DONT COMPLAIN ABOUT BENCHMARKS. YOU HAVE BEEN WARNED.
When long pressing icons in landscape mode to move them, etc the screen will flip upside down for a moment and right itself. This causes the action to be aborted.
Rotation selection in games is hit and miss. Some work perfectly and some like to flip the device upside down. Still debugging what is causing this.
AUDIO: Any decoder which uses Dolby surround current has a lower volume than the rest of the system (Netflix, Google Movies, etc). It's a WIP.
3D Performance: Is only OK. Needs some troubleshooting and perhaps kernel cleanup. Work-In-Progress.
Sensors: Testing various sensors, gyro seems 90 degrees off, etc.
I don't have an LTE version so this is not enabled in current builds.
Great news! Thank you very much.
logcat-radio as you request.
logcat-radio in attachment.
I get it on stock rom.
Thank you.
No LTE setting
Intalled.
But i can't find LTE setting.
GPS not work too.
Bluetooth can't turn on.
tethien said:
Intalled.
But i can't find LTE setting.
Click to expand...
Click to collapse
Same here. Don't have mobile data options under "setting-data usage".
But still many thanks to hashcode! ...and willing to continue testing.
logcat-radio get on this rom
in attachment
I found some issues with my first build and I'll be putting up #2 here in a bit once I iron out some other changes I currently have going.
Hashcode said:
I found some issues with my first build and I'll be putting up #2 here in a bit once I iron out some other changes I currently have going.
Click to expand...
Click to collapse
Sweet!
Updated OP w/ test #2:
LTE MODEL Download Information:
[LATEST][08/06] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jemlte/cm10.2/cm-10.2-20130806-UNOFFICIAL-jemlte.zip
md5sum: d2d0be88c07ca9623d3b87e03797a33e
This ROM has a few notable changes:
- It's using the new sensor hardware layer (from source!) which is almost -- but not quite done. So for now, the ambient light sensor doesn't work. All other sensors work. Tho, the gyro still has mixed X and Y axis.
- I did some comparisons to the regular JEM build and noted that rild, the gsm permissions, MMS.apk and Phone.apk are in this build. Obviously, once things start working, I'll want to remove some of that as it doesn't apply but for now thats a good sign.
I need a new logcat -b radio of this build.
Tks god now I can post -_-
Thank you @Hashcode for trying to build rom for us
I follow topic every hour and I have some infomation for you:
-Your first LTE build has nothing about mobile network.
-Your second one has a setting named: emegency alert and setting about which situation and action.
-The Messenger app can't send a messenger to another number.
-No sign of mobile signal, nothing, no data roaming on off, no apn etc ...
-Call at lockscreen doesn't work.
I've tried many rom, but the rom that LTE network worked is stock 8.1.4 that has APN adding option (I'm living in Vietnam so I used local network operator here). The Stari-rom doesn't has APN option but still has network system and can recieve sms.
/// I've just tried to install your 8.4.3 stock rom zip, ithe 3G network worked
Thanks for the input. Did you by chance get the output from "adb logcat -b radio > logcat-radio.txt"?
Sent from my XT926 using Tapatalk 2
installed 0806 rom. still no mobile data options under "Settings - Data usage"
however, under "Settings - more...", there is line saying "cell Broadcasts".
i'm away from home on a business trip. will do the logcat once getting back to the bay area.
thanks a lot, hashcode!
Logcat radio from 0806 rom
As you request.
Thank.
Updated the OP with a new TEST build:
LTE MODEL Download Information:
[LATEST][08/07 #3] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jemlte/cm10.2/cm-10.2-20130807-UNOFFICIAL-jemlte.zip
md5sum: d499384a940dffb3ca7e6ac512fcf370
CHANGES:
Fixed the overlay so that mobile data is supported by the OS
Using CM apns.conf file now (it includes the 2x ATT entries from the stock file)
Changed from a "phone" style build to a tablet + mobile data set of packages (No Dialer / MMS)
Need a new: adb logcat -b radio > logcat-radio.txt
Thanks!
The new rom has a Mobile networks settings, but no signal. Maybe this park is for the smartphone hardware and not for tablets. Cuz I see Network Operater doesn't show up at status bar, just a triangle with nothing. And when I was in the network operations setting, it scan for network, manage mobile plan doesn't recognize sim (the stock 8.4.3 does). Or maybe it just setup for AT&T network?
I don't know why I can't get the log file, my computer does recognize as ADB, but when I tried to log, it said waiting for device.
Your rom is improved every update ^^
thanks for your work, bro.
logcat radio from 0807 ROM
waiting your new rom!
gamer941 said:
The new rom has a Mobile networks settings, but no signal. Maybe this park is for the smartphone hardware and not for tablets. Cuz I see Network Operater doesn't show up at status bar, just a triangle with nothing. And when I was in the network operations setting, it scan for network, manage mobile plan doesn't recognize sim (the stock 8.4.3 does). Or maybe it just setup for AT&T network?
I don't know why I can't get the log file, my computer does recognize as ADB, but when I tried to log, it said waiting for device.
Your rom is improved every update ^^
thanks for your work, bro.
Click to expand...
Click to collapse
You must enable "USB debugging" under "Developer option" before run adb command.
Go to Setting/About tablet the press 7 time to "Build number" line. "Developer option" will appear on left menu.
tethien said:
You must enable "USB debugging" under "Developer option" before run adb command.
Go to Setting/About tablet the press 7 time to "Build number" line. "Developer option" will appear on left menu.
Click to expand...
Click to collapse
Oh that's it
I just a newbie started to use android :victory:
tethien said:
waiting your new rom!
Click to expand...
Click to collapse
I'm seeing lines like this in your radio logcat:
W/use-Rlog/RLOG-RIL_VDR( 134): ril_oem.c:194 Failed to set mtu::rc=1,0, cmd=[echo 1400 > /sys/class/net/rmnet0/mtu]
E/use-Rlog/RLOG-RIL_ODL( 134): pktio.c:271 cant open device: device=/dev/ttyUSB0, errno=13
Can you check the following in adb and post it for me?
ls -l /sys/class/net/
ls -l /dev/ttyUSB*
Thanks
in the subsequent posts below, you will find all the info you need for not only the device but the ROMs I have had my hands in.
each person who I pulled the files from will get a thanks in the posts as necessary
NonSense 1.04
Disclamer: these files are meant specifically for the HTC Desire 510. Use these files at your peril, you assume any responsibility for loss or damage that may result from use of these files or procedures. what has been included in this tutorial is for the HTC Desire 510
You have been warned.
note: from now on CRI signifies cricket, and B-S signifies sprint/boost if those signifiers aren't used, it applies to both type of this phone
now to the goodies.....
List of supplies:
1. Phone (HTC Desire 510)
2. USB cord that syncs with the PC
3. USB drivers installed for the phone
4. the zip files from this location. click here
4.1 there are 2 different versions of the same ROM, but the *1.04-lean.zip is US only (refer to changes to see why).
4.2 CRI for cricket/att, B-S for boost/sprint
5. read these instructions completely before attempting
before we get started make sure you have supersu (which can be downloaded from here), and NonSense1.04.zip copied to the root of your external SD card
NETWORK UNLOCK (I.E. switching services)
as this phone is LTE compatible, it takes a SIM card no matter the service to receive calls and data. so it stands to presume all you need to do is network unlock the device (Sprint calls it UICC unlock, others it's the Network Unlock Code)
the phone needs to be network (SIM) unlocked in order to switch it from cricket to sprint, or from sprint to virgin mobile, etc.
to network unlock the phone:
1. make sure you are on stock ROM (the one that came with the phone, not the one listed in this post nor CM)
2. call the respective original service provider of the phone (i.e. cricket, sprint, etc.) and tell them that you are leaving the country (like to Australia) and you want to unlock the SIM so you can use your device for service down there.
2.1 if you bought the phone second-hand or don't have service on it, you will have to find a reputable unlock service online
2.2 for sprint customers, your account HAS to be at least 6 months old before they will give you the UICC(SIM unlock) code
2.3 for boost customers, your account HAS to be at least a year before they will give you the UICC(SIM unlock) code
3. once you have the SIM unlock code, pull battery from phone, remove the original SIM, put your services respective SIM in (i.e. originally a cricket phone now running a T-Mobile SIM), put in battery, boot phone, and enter the unlock code where it asks.
4. once your back into device, you'll notice you will have no data.
4.1 what needs to be done is to program the APN (google will be your best friend here - for example sprint lte apn settings, or T-Mobile lte apn settings).
5. now that you have the APN settings, you can program them into the phone.
5.1 APNs can be found in the device by going to settings, then mobile data, clicking on access point names. in there in the upper right hand corner should be 3 dots that are verticle. click on that and then on new APN.
5.2 add the respective settings, click save and then make sure it has a green dot next to it.
6. sit back and enjoy the fruits of your labor
APNs for this device can only be written once the phone has been UNLOCKED and the original (cricket) service providers SIM is NOT inserted, and your using another service Provider ( sprint, T-Mobile, etc.) SIM.
UNLOCKING BOOTLOADER
1. for the drivers, use the ones contained here in the HTCDrivers.zip and extract them to the desktop
1. extract and use the file contained in adb.zip to flash unlock token
2. follow this tutorial and choose all other supported devicess when it asks about device.
INSTALLING TWRP AND KERNEL
in the adb file you should notice a file called recovery.img. that is TWRP recovery for the device
there is also a file called boot.img. this will allow read/write permissions at the System level once root is obtained
if you have either the sprint, boost or another service provider's variety of this phone, try flashing their respective kernel after you install the ROM or before you root (no guarantees that flashing the respective kernel will work. as I have the cricket variety of this phone, I am only developing for that one)
1. from home screen, go to settings and scroll down to power and then scroll all the to the bottom of that and uncheck "fast boot"
2. shut down phone completely
3. go back into fastboot (vol down + power)
4. Select fastboot from the menu list and press the power button.
5. open command prompt and use the CD command to get it to the root of the adb folder (CD C:/users/sky/desktop/adb).
6. plug in device and wait for it to say fastboot USB
7. type in command prompt "fastboot flash recovery recovery.img' (should complete within 4 seconds)
8. in the same command window type "fastboot flash boot boot.img" (should complete within 4 seconds)
8.1 step 8 can be skipped if your just flashing *NonSense1.04*.zip
9. pull battery once that is completed and put it back in.
10. power device on (skip this step if rooting)
OBTAINING ROOT (can be skipped if installing NonSense1.04 as it's already rooted)
1. re-enter fastboot mode and choose recovery. press power to select it
2. once in recovery select install and go to external SD and select the supersu update package.
3. once selected, you should see a slider on the bottom of the screen that says swipe to confirm. do so
4. once package is installed you should see a button that says reboot device. do so
5. wait for it to fully load
INSTALLING NonSense 1.04
1. re-enter fastboot mode and choose recovery. press power to select it
2. once in recovery select install and go to external SD and select the NonSense1.04.zip.
3. once selected, you should see a slider on the bottom of the screen that says swipe to confirm. do so
3.1 beware, it may take a bit to install. just be patient, it's working.
4. once package is installed you should see a button that says reboot device. do so
5. wait for it to fully load. be forewarned, it may take about 15 minutes to load
CHANGES
CRI versions
1. DEODEXed the ROM
2. added external SD support into the ROM
3. fixed FC on clock app (switched clock/alarm from stock worldclock.apk to AOSP clock)
4. changed bootanimation.zip, boot sound, and stock ringtones and sounds.
5. added more stable kernel to flash file.
6. added Pandora (no-ads vers. 5.5), SpiritUL (FM radio support), Facebook, RootBrowser, Adobe reader, Adobe flash player, and Viper4android (DSP/equalizer)
6.1 all apps that have been listed in 6 can be uninstalled without the need for root
7. root and SU have been added and are up to date in this rom as of 11:45PM MST on 3/1/215
8. added apns-conf.xml from CyanogenMod
9. got native APP2sd support thanks to pattyboi's kernel
B-S versions
1. mostly DEODEXed the ROM
2. fixed FC on clock app (switched clock/alarm from stock worldclock.apk to AOSP clock)
3. changed bootanimation.zip, boot sound, and stock ringtones and sounds.
4. added more stable kernel to flash file.
5. added Pandora (no-ads vers. 5.5), SpiritUL (FM radio support), Facebook, RootBrowser, Adobe reader, Adobe flash player, Wifi Tether, and Viper4android (DSP/equalizer)
5.1 all apps that have been listed in 5 can be uninstalled without the need for root
6. root and SU has been added
*1.04-lean
list of removed apps
1. Dropbox (can be found in playstore)
2. Google plus (can be found in playstore)
3. Hangouts (can be found in playstore)
4. HTC Dot View(can be found in playstore)
5. keyboard language packs for Arabic, Chinese, English UK, French, German, Greek, Italian, Portuguese, Russian, and Spanish (not in play store) if needed, flash language.zip found here
6. VPN dialogs (not in play store) if needed, flash missing.zip found here
7. HTC Zoe (can be found in playstore)
BUGS
CRI versions
1.USB internet pass-through not working
2.WiFi direct (miracast) not working
3. want to get rid of annoying volume too loud warning
B-S versions
1. native hotspot says internet when connected to win 7 machine, but will not allow it to go through. Have included wifi tether as a workaround until the issue can be resolved
THANKS
CRI versions
I thank wolfaas12345 for his awesome tutorial on bootloader unlocking, pattyboi for providing a more stable kernel, and chainfire for providing a great solution to provide the SU binary and app for rooted devices. and of course, CraviingCritic for providing the original ROM in which this wouldn't be possible
B-S versions
I thank wolfaas12345 for his awesome tutorial on bootloader unlocking, pattyboi for providing the current kernel, and chainfire for providing a great solution to provide the SU binary and app for rooted devices. and of course, LarryBoyG for providing the original ROM in which this wouldn't be possible
please feel free to let me know if there's any issues with this release and i will fix them as they are found for now as this device is the one i primarily use as of right now.
I will also be keeping the links updated for as long as I own the device (being that my HTC Desire 510(Cricket) is network unlocked, that may be a long time - or until I get a better device).
UPDATES
for those of you who have downloaded the ROM since first release, I will include an CRI_NSupdate.zip or B-S_NSupdate.zip file found here. it will include the changes I have made to the rom since it's initial upload.
the file by the name of NSupdate.szip will include update that pertain to both the CRI and B-S ROMS
to install the updates, just put the update file onto the root of the SD card, reboot into recovery, choose install, pick the update file, swipe the blue button on the bottom, reboot and enjoy.
EDITING THE BOOTUP
location of files mentioned is in /system/customize/resource
to change boot animation
1. find your favorite boot animation
2. rename it to AIO_bootup.zip
3. copy/move and overwrite the original with a root explorer to /system/customize/resource
to change the boot sound
1. find a sound file you like and want to hear every time the phone boots (can be changed at any time)
2. convert it to wav (the file has to be wav in order for the phone to recognize it)
3. rename it to CRICKET_LOGO_24bit28k_STEREO.wav
4. copy/move and overwrite the original with a root explorer to /system/customize/resource
reboot and enjoy...
THINGS NOTICED WHILE CREATING ROMs
1. both (cricket and boost/sprint) phones are exactly the same except for the boost/sprint ones contain a CDMA chipset.
1.1 the only things I had to change from the cricket rom to the boost rom was apns.xml in framework-res, apns-conf.xml, and the preferred network type in build.prop.
2. all kernels work for both (US) versions
3. the same recovery is used on both (US based) devices
so essentially, if we develop for the boost/sprint version of the device, change a few things, it will be ready to roll for the cricket version as well
TO FIX NATIVE TETHER ON B-S VERSIONS
1. Install Script Manager – SManager app from the Play Store.
2. Open the app and grant it root access when prompted.
3. Now, navigate to /system/etc/init.d and tap “tether” script.
4. Click on SU and Boot (Android skull and gear icons, respectively)
5. Click on Run and Save options.
The issue should be fixed now. Reboot and enjoy!
thanks goes to qwerty6532 and LarryBoyG for the fix. now to add that permanently to the ROMs and then they'll be absolutely stable enough for me to be happy and start working on CM11
CM11
I will be building CM11 for the device for both the cricket and boost models. look for the info here as I update it a I need
****edit**** ok so I figured out some of the issue with CM11 not wanting to install apps. I got the internal memory pulling the 1.1 gbs but now I need to symlink the external memory where it goes.
****edit**** so I have figured out what needs to be done...... the kernel for CM11 needs to be built from the ground, up (or one needs to be built that is compatible with it). i'll upload the current one that fixes the memory error (look in downloads).
reserved
so as i have not been actively developing on the phone i will no longer supply updates. all flash files are up to date as of 8 months ago and should be working with out an issue.
again, reserved
same to you...
This would have to be one of the most comprehensive tutorials I have read. 10 out of 10 and kudos. Pity I have a 64 bit device and can't use most of it lol.
Burtrum57 said:
This would have to be one of the most comprehensive tutorials I have read. 10 out of 10 and kudos. Pity I have a 64 bit device and can't use most of it lol.
Click to expand...
Click to collapse
if I had a 64-bit version for this device, I would have it out as soon as I could. and thanks
Great job. Off and running now
I'm not sure how to add the tether fix to the ROM. Not really a developer more of a tester.. Wish I could get into developing don't really know where to start lol.
If you need any help testing or working on CM11 for Boost shoot me a PM I'd be glad to help
Sent from my 0PCV1 using XDA Free mobile app
Question to you Schizoidd......If I install the new 1.04lean over the previous build, do I still need to flash that update or is is already included in 1.04lean. I already falshed that some time ago when you first put it out, so I'm just not sure if its needed again or not. Thanks bro.
CSP III said:
Question to you Schizoidd......If I install the new 1.04lean over the previous build, do I still need to flash that update or is is already included in 1.04lean. I already falshed that some time ago when you first put it out, so I'm just not sure if its needed again or not. Thanks bro.
Click to expand...
Click to collapse
When you flash the new one, wipe the system partition and then use an explorer to remove v4a from the user apps. Which is located in /data/apps and reboot
qwerty6532 said:
I'm not sure how to add the tether fix to the ROM. Not really a developer more of a tester.. Wish I could get into developing don't really know where to start lol.
If you need any help testing or working on CM11 for Boost shoot me a PM I'd be glad to help
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
Well it's added to it. It just needs to be activated for now until I can figure out how to add it to automatically start from the first run of the Sprint/boost ROM
schizoidd said:
When you flash the new one, wipe the system partition and then use an explorer to remove v4a from the user apps. Which is located in /data/apps and reboot
Click to expand...
Click to collapse
Sorry, not following "wipe the system partition" ???
CSP III said:
Sorry, not following "wipe the system partition" ???
Click to expand...
Click to collapse
if you in recovery, go to wipe and then advance wipe and check system. wipe it like u would as if ur doing a factory reset
schizoidd said:
if you in recovery, go to wipe and then advance wipe and check system. wipe it like u would as if ur doing a factory reset
Click to expand...
Click to collapse
Yeah, I figured as much. Should have been clearer with my ? Is that before or after I flash the new lean. I though if I did it after, that it would set me back to square one. As in having to start fresh setting everything up again, which I really dont want to have to do. Apologies for my unclearness.
CSP III said:
Yeah, I figured as much. Should have been clearer with my ? Is that before or after I flash the new lean. I though if I did it after, that it would set me back to square one. As in having to start fresh setting everything up again, which I really dont want to have to do. Apologies for my unclearness.
Click to expand...
Click to collapse
it'll leave ur data alone, just delete the OS. do not touch internal memory, davlik, data, or cache and ur stuff will be safe. I have done it and my stuff is fine
schizoidd said:
it'll leave ur data alone, just delete the OS. do not touch internal memory, davlik, data, or cache and ur stuff will be safe. I have done it and my stuff is fine
Click to expand...
Click to collapse
Right on buddy. I'll take you at your word on it. I've never had to do that before so it naturally made me a little nervous. Not that I couldnt have just restored a backup, but still . Many thanks.
Problems
System UI force closes and power button doesn't turn the screen back on when I flash the latest cricket version.
schizoidd said:
I
for those of you that build the kernels, do you think u can build one that is AOSP and compatible with the device for android 4.4.4?
Click to expand...
Click to collapse
we cant really do a "aosp" kernel because of htc's modifications to the board and pins,and they have their own dtb issues...im 99% sure mine works with android 4.4.x because of larry using it in gpe,just repack the ramdisk the zimage and it should be okay
Bobby060 said:
System UI force closes and power button doesn't turn the screen back on when I flash the latest cricket version.
Click to expand...
Click to collapse
If you're going from bone stock to this, you need to do a factory data reset. Just make ssure you back up your data and use nandroid manager to pull it data back into the new ROM
Hi. When I changed in settings network mode to 2G only, signal icon started to flicker. After reboot I have no signal at all (it is impossible to call, send/receive SMS, use data connection etc.). In info (*#*#4636#*#*) preferred mode is set to "WCDMA preferred" and I cannot change it - I can chose another value from list but changes are not saved.
In settings phone says that none of SIM cards are inserted - but I can now access SIM 1 settings. However, everything is blocked and beneath the network type there is a description: "Invalid Network Mode (-1). Ignore.".
It happend when I was on latest official CM 13.0 nightly but this is probably not ROM's fault. Problem didn't disappear after clean flash, after restore or even after flashing whole set of images with official MiFlash tool.
After some research I found that setting ro.telephony.default_network from 22,22 to 10,10 should work, as 10 is for "LTE/GSM auto" when 22 is incorrect value. Separated by comma for two SIM slots. Ok, so I tried to edit build.prop with some apps without luck - access denied (rooted). I tried to mount system rw from Root explorer - nothing happens, still ro. From ADB - no, "dev/block/bootdevice/by-name/system is read-only". I even tried to change SELinux to permissive but still nothing
Every idea is welcome, I just need to get my phone to work as a phone again
Hi All,
TLDR:
- LineageOS 16, Dual-SIM
- Deactivated second sim in the settings
- Updated to LOS 17.1
- SIM is still deactivated, no button to enable
- Looking for ways to remove SIM card settings
before upgrading from LineageOS 16 to 17.1, I had my second sim card disabled via the general slider (it's my business sim, and I was on vacation). This slider feature now seems to be gone in LOS 17 but the sim is still in a disabled state, meaning LOS is not even asking me for a pin on boot, instead I receive a message saying "Adroid System" / "There's an internal problem with your device. Contact your manufacturer for details". I can still see the sim in the settings (which actually freeze if I try to change carrier settings), and the sim is visible in the top bar with zero reception and the "x". I can still use the sim card in other phones, but the OP3T seems to have memorized the sim card settings somewhere, regardless of which sim slot I use. My solution would have been to delete the per-sim settings, that LOS seems to be storing somewhere, but I have no idea where they could be located.
Any pointers or other ideas would be much appreciated. Thanks!
Same issue here:
System:
- Hardware: OnePlus 3T
- Firmware: 9.0.3
- Recovery: TWRP 3.3.1-1
- Software: LineageOS April 25, 2020
Symptom:
Dual SIM issue: SIM1 (in slot1) works as expected. SIM2 (in slot2) never connects to its network. I use SIM1 mainly for calls, SIM2 mainly for data.
Tried:
- to update firmware to 9.0.6, no change
- to swap SIM1 and SIM2, SIM1 still works in slot2, SIM2 does not work even in slot1, no change
- to remove SIM1 and keep only SIM2 (slot1 or slot2), no change.
- to use different bands GSM/WCDMA only for SIM1 (was GSM/WCDMA/LTE) and LTE only for SIM2 (was GSM/WCDMA/LTE), no change
Hints:
- when I installed LOS17.1, SIM2 was probably locked (I only unlock it when I used mobile data)
- at boot, only PIN1 is asked, not PIN2
- in SIM2's menu, choosing "Advanced > Access point names" crashes `Settings`.
- when SIM1 is not inserted, only SIM2, the `Mobile data` icon in `Quick tiles` does nothing
I looked in this XDA thread dedicated to LineageOS 17.0/17.1 on OnePlus 3/3T, and found several messages complaining about SIM cards not being detected. The problem seems different and the solution suggested is outdated, since the line is now already in `init.qcom.rc`.
The most similar issue is this thread, I cross posted in reddit. I searched gerrit for `dual sim` in the lineage-17.0 and lineage-17.1 branches as well `sim` in the oneplus_oneplus3 tag, without success.
Any idea?
Summary: `/data/system/radio` seems to be broken. Should be replaced with the same directory from a clean install. This breaks PIN auth, which means that
`/data/system/locksettings.db` has to be removed as well, and the PIN reconfigured.
Steps:
0. reboot in TWRP
1. backup broken `data` partition
2. wipe data partition
3. adb sideload `lineage-17.1-20200423-nightly-oneplus3-signed.zip` and `open_gapps-arm64-10.0-nano-20200516.zip`
4. reboot in system
5. make sure that both SIM cards are unlocked and working
6. reboot in TWRP
7. backup working `data` partition (or copy `/data/system/radio` somewhere)
8. restore broken `data` partition
9. move `/data/system/radio` to `/data/system/radio_broken`
10. put instead `/data/system/radio` extracted at step 7, either by gunzip/untar backup, or from the "somewhere" you selected
11. delete `/data/system/locksettings.db`
12. reboot into system
13. unlock both SIM cards
14. set a PIN
Done
why are the devs unable to solve that with an update or flashable zip?
Notor1ouS- said:
why are the devs unable to solve that with an update or flashable zip?
Click to expand...
Click to collapse
Clean flashing on major version bumps will always avoid this issue in the very first place. In my opinion there are much more important topics for a dev to focus on then getting dirty upgrading major versions fool-proof as long as clean flashing works flawlessly and fool-proof.
i disagree on that. a competent dev should be able to do that.
but that's going nowhere anyway, so I'm out.
Notor1ouS- said:
i disagree on that. a competent dev should be able to do that.
but that's going nowhere anyway, so I'm out.
Click to expand...
Click to collapse
If you have the competences and the knowledge to fix issues from dirty upgrading, go ahead, dirty upgrade and fix the issues.
If you don't have the competences and the knowledge to fix issues from dirty upgrading, go ahead and clean flash as recommended on major version bumbs.
If you don't have the competences and the knowledge to fix issues from dirty upgrading and you are resistent to recommendations, blaming the devs as incompetent will polish your ego but don't fix the issue.
For a community driven open source project, you can easily push a fix instead of blaming the devs as incompetent!
Be a user - not a customer.