Database Develop

Help I Wipe System XT1069

Anyone can upload TWRP backup the XT1069 , I realized Wipe System and have no backup
tks

sidneyft said:
Anyone can upload TWRP backup the XT1069 , I realized Wipe System and have no backup
tks
Click to expand...
Click to collapse
I don't think that someone else's backup will work on your phone lol, go here http://sbf.droid-developers.org/phone.php?device=36 and download your stock ROM, then flash it via fastboot

Thank you, I managed recovery my "Moto G" through the fastboot

Brick my phone again, after changing to ART.
The phone goes into bootloader mode, tried to flash via fastboot, but of the following errors:
fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 5.059s]
writing 'partition'...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 10.474s
Every command I do the fastboot appears the following error:
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition (comando que eu escrevi)
FAILED (remote failure)
Does anyone know what might be going on?
And you can not I use the recovery , any option I choose in cell itself appears: "boot up failed".

I also tried the RSD Lite, did not work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sidneyft said:
I also tried the RSD Lite, did not work
Click to expand...
Click to collapse
can you go into custom recovery or can you flash a custom recovery

AICP LP 5.1 Radio Issue

Hi - has anyone figured out how to get AICP Rom to recognize GSM networks? I'm on T-Mobile in the US. I get an active LTE data connection, but my phone number is not recognized since the software is recognizing CDMA (screenshots attached). I've already tried flashing the stock modem. Thanks for any help!
Tried this with stock modem files:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
(I'm on Verizon developer edition xt1060. Previous CM12 5.02 recognized the modem correctly.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

zestyboy said:
Hi - has anyone figured out how to get AICP Rom to recognize GSM networks? I'm on T-Mobile in the US. I get an active LTE data connection, but my phone number is not recognized since the software is recognizing CDMA (screenshots attached). I've already tried flashing the stock modem. Thanks for any help!
Tried this with stock modem files:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
View attachment 3274642
View attachment 3274643
Click to expand...
Click to collapse
I am on xt1053 on tmo and had no issues at all running build from the 17th i think it was

[FASTBOOT]Samsung download mode logo

Warning: This will most likely not work with the older cm11 bootloader please make sure you are using the latest bootloader!!
Hello!
Just figured out that the one can take bigger fastboot logo images than 446x56 so I made a Samsung download mode logo that shows when you enter fastboot mode!
Image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On actual device:
I am in no way responsible for any bricks caused by this, the guide and bin file both work 100% and were flashed numerous times by me! Always make sure the downloaded file is not corrupted (size for my logo.bin should be ~1361KB)
How to install:
1: Download this logo.bin file: Download (MD5: 9f3a4250452b8453f83d199db6a962ed)
2: Reboot into fastboot by holding power up and power until "fastboot mode" appears
3: Connect phone to computer
4: Flash the downloaded logo.bin file by typing: Fastboot flash LOGO logo.bin
5: If everything went well and no errors occured, type: fastboot reboot
6: Boot into fastboot again to see the result
Something wrong with the image? Want me to change/add something? Tell me via PM or reply to this post!

Reckon you could post the MD5? I really don't wanna accidentally get a corrupted download and flash it

TheLemonyOrange said:
Reckon you could post the MD5? I really don't wanna accidentally get a corrupted download and flash it
Click to expand...
Click to collapse
The MD5 should be 9f3a4250452b8453f83d199db6a962ed

Thank you! Will flash this once I get home or if I can get flashify functioning again

Persist Help

Hi there i have new problem when flashing the persist I get an error message
Sending 'persist' (32768 KB) OKAY [ 0.703s]
Writing 'persist' FAILED (remote: 'Flashing is not allowed for Controlled Partitions')
which one the solution? :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You gotta unlock flashing for critical partitions too.
Type *fastboot flashing unlock* then *fastboot flashing unlock_critical* on fastboot. After that, try to flash again.
Good luck.
Sent from my Mi A2 using XDA Labs

Cuesta4 said:
You gotta unlock flashing for critical partitions too.
Type *fastboot flashing unlock* then *fastboot flashing unlock_critical* on fastboot. After that, try to flash again.
Good luck.
Sent from my Mi A2 using XDA Labs
Click to expand...
Click to collapse
fastboot oem device-info
(bootloader) Verity mode: true
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.009s]
Finished. Total time: 0.010s

It's probably due to treble. 8.1 and 9.0 don't have a /persist partition, if I'm not mistaken.
Try goin back to 8.0 or Nougat and then flashing.
Sent from my Mi A2 using XDA Labs

Somehow deleted Recovery partition and cannot flash or boot anything to it.

EDIT: I believe I have deleted the recovery partition!? (not sure how that happened) I have verified this by trying to boot to recovery and it just cycles one time and then the next cycle it comes to the home screen. How do I fix this?
I have an Xperia XZ2 Dual SIM
I was able to unlock my phone, however when I try to either boot or flash TWRP I get these errors
I flashed stock rom using newflasher, I unlocked the Bootloader. Xperia says the bootloader is unlocked...
I cant proceed any further until i fix this. And YES I HAVE GOOGLED TO FIND THE ANSWERS ( I cant find one)
C:\ADB>fastboot flash recovery recovery.img
target reported max download size of 805306368 bytes
sending 'recovery' (4548 KB)...
OKAY [ 0.145s]
writing 'recovery'...
FAILED (remote: No such partition.)
finished. total time: 0.151s
C:\ADB>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.154s]
booting...
FAILED (remote: Invalid Boot image Header: Bad Buffer Size)
finished. total time: 0.166s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm starting to think that this phone doesn't have a recovery partition. It does it some other way.
Someone will have to recomfirm that as that's what a absolute noob thinks after hours of searching.

A/B partitioned device does not have recovery partition, recovery is in ramdisk inside boot partition