Related
So I have done many searches and still nothing. Is there actually a fix that will make FB work corectly. I use the energy Rom. Maybe I am missing something? If so point me in the right direction please.
Or?
Or is there a Rom that has a working facebook.
Microsoft has updated the facebook app in the marketplace if thats what you are talking about. It works better now. The previous app has been broken for a few months now.
Ok I asked my self the same thing a few weeks ago as I had just switched over from myspace to facebook. The tab on the energy rom requires you to do the following....
- Go to Facebook Tab
-Press under menu or options (don't know of the top of my head)
-Go to validate app (in other words u need to give it permission to the app to be able to update ur stuff via facebook)
-select copy from browser
-let the tab options open opera
-after u log into ur account u will see a page that says "success"
-now copy the whole link and return to the validation part of the tab
-paste the link and let the tab do it's thing (may take anywhere from 1 sec. to 5 mins)
-After that your done!
Now u can sync ur contacts, see updates and even post updates.
But keep in mind that even like all the facebook apps and other ways to get to use facebook, none of them are as up-to-the moment as actually being online on ur computer on facebook.
Hope that helped!
So after looking around through the forums I have learned a lot, and I have appreciated every piece of information I have been given, but there have been some things I have either not found answers to, or have not found complete answers (ie: someone only asked part of what I'm asking).
*Phone info listed in Signature*
When giving an answer, please number it according to the question and/or Quote the question, Please do not quote the entire post.
1. IMEI Device ID: Can I change it? and How?
- After Flashing and Rooting, my email exchange account no longer recognizes my phone and asks me to validate the Device ID. I did get Exchange to work when I had 2.1 and I'm not doing anything different from before. (Note: Android Device ID and IMEI Device ID are 2 different things)
Answer: Your IMEI Device ID is located on the back of your phone. You can find it by removing the battery and then it is the number above the first barcode. Your IMEI ID is something you neither can change nor want to. If a problem occurs trying to get Exchange to work again after messing with your phone, try connecting to the network at the location of your exchange account. Make sure your phone is registered, if it's not, register and wait a day before attempting to connect to exchange again. If that still doesnt work, contact their IT dept and have them manually add your phone. Also, see Post#4 or Exchange Thread
2. Android Device ID:
a)Is the number/letter sequence located on my battery, my Android's ID?
b)In the app "Android ID Changer", when I change it to said ID on battery and click "Save" nothing happens, the ID that the App gives me is still listed at the top.
Answer: If you flash and root with what I've given in my signature, your Android Device ID should be the same or there shouldn't really be anything you need to worry about that requires it. Your IMEI ID is the important one. Also Reference the Device ID Thread, and please make sure you write yours down before flashing and rooting!!!!
3. Sounds Sounds Sounds!!!!!: OK, so I know everyone wants to have their own custom tones right? Well, after looking around for a little while, I haven't really found full solutions as to what I want:
There are 6 Different Kinds of Tones, and a 7th Tone Type I would like added:
- Voice Call Tones: As main ringtone and per contact(As Title)
- Notification Tones: (Text Messages, Email, etc)
- Music: Your media, the only files that should show up in "Music Player"
- Alarm Tone: In the Default Clock App, under Alarm Creation
- Smart Alarm Tone: In the Clock App also under Alarm Creation
- Screen Touch "Pop" Tone (When you click an app)
- Reminder Tone: Reminds you that you have a text or missed call(Not included on phone currently)
a) OK, with that list, when I go in to choose for each one, you get a menu (for example Voice Call gives you: Silent, AT&T Tone, Bird loop, ..., Samsung tune, ...). I would like for my custom sound files to show in the Default list of each according Tone type as listed above. How do I do it?
b) How do I differentiate the Text message tone from the email tone? How do I make make text message tones & settings individual/separate from Notification Tones and Settings?
c) Reminder Tone: When I had a motorola back in the day, if my phone rang at me and I was too busy or not around it at the time to look at it, about every 5 minutes, it would beep at me telling me that something happened while I wasnt paying attention. Is there a way that I can add this feature to my Captivate?
4. ASTRO vs. My Files(on 2.2-Froyo): It seems like "My Files" has everything that ASTRO has, yet I've seen a lot of people saying to get ASTRO. Is there any reason to have it?
Answer: If you have enabled the Side-Loading of apps, there is no real difference between these two other than their appearance since you can bring up the .apk installer that's included in both programs. Other options to using these to programs are: Root Explorer
5. Default Samsung App: Daily Briefing: There has got to be something better than this out there, any suggestions?
- Also, I already have a big clock that has weather(Fancy Widget), so I dont really rely on Daily Briefing for it
Answer: If you are looking for something in terms of a
Widget NewsReader: try Feedr for news, Auto Express for Car News, and ScoreCenter for Sports News
Non-Widget news readers include: Google Reader, gReader, & NewsRob.
6. Tethering/I'm Tethered, What Now?:
a) I know that my laptop can access WIFI via MobileAP, but how can I connect with my Laptop via USB Tethering. I have Windows XP Pro SP3
b) Is it possible for me to use my Laptop to send Txt Msgs?
c) Assuming I have hundreds of Contacts, Is to possible to keep ALL Contacts on laptop while keeping only most used contacts on phone?
Answer:
a) USB Tethering can be accomplished through apps like EasyTether or PDANet, but most ROM's for the captivate do have it standard. It would be under Menu > Settings > Applications > USB Settings > PC Internet.
b)
c)
7. Removing the Default "Latitude" App (2.2-Froyo): I already have Maps, Navigation, and Places. Why would I need "Latitude"? What is the purpose of it?
I use Titanium Backup Pro to "Freeze" most of the default apps (freeze meaning hide them w/o deleting them) but I cannot seem to find "Latitude" in the list of Apps, is there a way to freeze it with Titanium?
8. Allshare Default App 2.2: What does it add to the phone? Do I need it or should I "Freeze" it?
I'm looking for a way to play my media from my computer to my phone, however Windows Media Player doesnt recognize my phone as something to share to, how can I change this? (I use Windows XP Pro SP3)
9. FM Radio: Is there a way I can listen to my favorite channel without using up any data? And if I listen to the channel for about an hour, how much data will I have used? (So far, I've only seen Last.FM and TuneIn Radio)
Answer: Best thing to do if you want to listen to the Radio on your phone is to do it via Wifi. Unfortunately for us, our phone originally had plans to have a FM Chip installed allowing us free FM Radio, but that's just not how AT&T rolls. Another App besides Last.FM or TuneIn Radio to try is iheartradio. Furthermore, if you are wanting to watch your Data Usage, I suggest trying 3G Watchdog, I don't know how accurate it is from month-to-month, but it is an App(and Widget) that does watch your data usage.
10. Is there a way to rename the apps in my App Drawer? Some of them have strange/long names which will break a work so that it is on both lines or the whole title doesnt fit. This bothers my OCD so I was wondering if there was an easy way to do it.
11. Random Reboots When I don't have an Alarm enabled, sometimes my phone seems to go and sleep/hibernate/reset. Meaning I pickup my phone and for some reason it has gone and turned off on me. What's the deal? Does anyone else have this problem and is there a way to fix it?
12. Save Texts: What is the best way to save your text conversations to your computer besides using KIES?
13. Save Contacts What is the best way to Export Contacts to your computer for editing and later Importing back onto the phone besides using KIES?
- I want to have a back up of all my numbers so that I can remove some from my address book, but still have them on my computer in case I need them later.
14. GPS 2.2: Many have commented about fixing the 2.1 GPS, does the 2.2 GPS also need a fix?
15. Editing the System: Where Can I find in-depth threads that tell me how to change things in the system(thread links accepted)? I would like some that cover it in general, but I'd also like ones that also include adding and removing custom ringtones to the default as well as SetCPU and other functions.
16. The Lock Screen: Is there any way in which I can change the Default Lock Screen so that it includes a message on it like "This phone belongs to _______"?
Is there any other themes for the Text Message "Puzzle" Lock Screen?
17. Contacts:
a) Sorting Method - First I would like to sort my contacts by Group, then by Alphabetical Order. Is there any way that I can do this? Basically I want my girlfriend listed first, then all my Family Contacts, then all my friends. Is there a way I can do this other than adding symbols or prefixes in front of everyone's name?
b) Once while on the facebook app, it gave me the option to set a picture to one of my contacts(without saving the image to the phone), however I havent figured out how to do it since, does anyone know how?
c)How do I sync contacts with Gmail? Ive tried clicking Sync Contacts in Contacts under Gmail, and it shows the refresh icon for about a second but when I go to my gmail contacts, nothing is there. What's the deal?
18. Way too Awesome: So we've all seen what phones can do in the movies, hacking into computers and whatnot. Is there anything that our phones can do like in the movies? I personally would love to have a phone that Tony Stark or Sam Flynn would die for. ......Is there at least a way I can use my phone to unlock my car? I'd enjoy turning my phone into a trapper-keeper lol.
19. Custom Sound Settings: Media Volume can only go down as low as 5% before going to 0%, is there any way I can make my phone lower that 5% like when it's late at night but I still want to hear an app's crappy music, just really really quietly?
20. Phone Accessories:
What is the Best phone case for Captivate that utilizes a belt clip (w/screen protector)?
In terms of a 2nd battery, are there any batteries out there that have more battery life than the stock one that comes with the phone?
If I had a 2nd battery, would it be safe to leave it in my car throughout the year in case I need it, or would temperature be a problem?
21. Data Plans: Any chance of AT&T Coming out with a plan that's between 100Mb, and 2Gb?
I'm on Wifi most of the time, so I don't use most of my 2Gb, but I can easily use 100Mb, is there any chance of there being a 1Gb plan?
As I get answers to my questions, if the answer isnt too long I will edit the OP with the answers or link a post below the question for people who might stumble upon this thread with the same question.
EDIT: (Last Edited 1/17)
Added Answers to questions: 1, 2, 4, 5, 9
Added Parts B and C to #6
Added Questions: 15,16,17,18,19,21
1.) IMEI ID is on the back of the phone and don't think you can change that.
4.) Astro also lets you install third party apps that are loaded onto your SD card. My files just lets you browse.
5.) If you dont' need daily breifing, don't use it. I don't use it either.
6.) PDAnet will let you tether via USB and there are a few others.
10.) when you add a app to your home screens, you have the option to change the name. Doesn't help with your app drawer OCD but keeps your home screens under control.
11.) There are multiple threads about random shutdowns. Read them all if you want. So far, increasing the sleep speed minimum to 2000 (in setCPU) has worked for me. Granted it's only been a few days but no shutdowns since doing that.
14.) Reading all the GPS threads will show you that it's not locked into a particular OS. Nobody really knows what the problem is. Some have great GPS, some don't. Some get it working better with fixes, some don't.
axis01 said:
1.) IMEI ID is on the back of the phone and don't think you can change that.
4.) Astro also lets you install third party apps that are loaded onto your SD card. My files just lets you browse.
10.) when you add a app to your home screens, you have the option to change the name. Doesn't help with your app drawer OCD but keeps your home screens under control.
11.) There are multiple threads about random shutdowns. Read them all if you want. So far, increasing the sleep speed minimum to 2000 (in setCPU) has worked for me. Granted it's only been a few days but no shutdowns since doing that.
Click to expand...
Click to collapse
4. My Files has a package installer if you have enabled sideloading of apps and seems to work the same as ASTRO as far as I can tell.
10. I havent seen an option to change the name on the homescreen either, I usually just drag them from my app drawer though.
11. Could you define what the sleep speed minimum is?
EDIT: ANd big thanks on where the IMEI was. I was kind of avoiding taking the battery out, but the number on the back matched the number in the phone info so I was happy. And for some reason my phone now works with exchange. I think my phone was waiting till I knew what it knew lol.
Oh man. I'll see if I can answer them all. LET'S DO THIS!
1. Before you left 2.1 stock, shoulda backed up nv_data. If your Device ID and produce code get messed up, check out http://forum.xda-developers.com/showthread.php?t=881162 and http://forum.xda-developers.com/showthread.php?t=880223 Use these threads to try and restore it; but if that doesn't work you might be SOL without a nv_data backup.
As for exhange, check out http://forum.xda-developers.com/showthread.php?t=821297
I work for AT&T, so me and IMEI's are best buds. You can't change your IMEI as it's a number issued directly for AT&T. AT&T uses these IMEI's to determine what type of phone is on your account. Should you change the IMEI, it would appear to AT&T as "Unknown GSM", and you would cease to get data.
2. Read #1
3. It depends on the apps you use to accomplish said tasks. I would imagine very few of us use the stock e-mail client, i would imagine most of us use K-9 or something along those lines, in which case you can specify a sound file in said apps settings.
As for having them show up in the default menu, throw them into /system/media/audio/ringtones and they should show up in default.
I'm not sure about the reminder, although I can't see an app for this not existing. As stated above, some e-mail clients such as k-9 or SMS like handcent may have this feature. If the stock ones don't, what can ya do?
4. Don't get either, get Root Explorer.
5. If you already have a clock, I suppose all Daily Briefing offers is news and a calendar. There's plenty of awesome news readers for the Captivate. If you like the widget variant, i would go with Feedr. If you prefer non-widget news readers, Google Reader, gReader, NewsRob; all good choices.
6. It depends on the ROM. USB Tethering can be accomplished through apps like EasyTether or PDANet, but most ROM's for the captivate do have it standard. It would be under Menu > Settings > Applications > USB Settings > PC Internet.
7. Latitude is bundled in with Google Maps. Not sure how to remove it, or if you can..maybe.
8. You don't need it. It's just a global way to share pictures and videos to multiple sources. I never use it.
9. Connect to WiFi!
10. Aside from decompiling the APK, i don't think so. Maybe NinjaMorph can do it, but I don't think so. You can hide apps from the drawer though, or hide the text, with alternative launchers.
11. The captivate stock firmwares seemed to have a problem with randomly rebooting. I work at AT&T and I sell these phones daily so I can safely say it's just the stock, even the 2.2 stock seems to do it. You can use SetCPU profiles to work some magic, but it's easier to just install a Custom ROM, as I personally no longer have this problem UNLESS i am on stock. Use http://romkitchen.org from your phone, easiest way. Make sure to donate if you use it frequently, it's an awesome service!
12. Can't answer this one. I imagine there's an app to back up texts to files on the phone directly though, if not it wouldn't be very hard to make!
13. From your contacts on the phone, menu > (possibly More) > Import/Export. It will save EVERYTHING about your contacts(Ringtone info, pictures, birthdays, etc) to a .vcf file. These can be altered, edited and saved on the computer.
14. 2.2 stock needs a fix I'm pretty sure. Check out this thread http://forum.xda-developers.com/showthread.php?t=881941 , all you gotta do is flash one file, so do it anyway just to be safe!
Phew. Hope this helps!
geokhentix said:
Oh man. I'll see if I can answer them all. LET'S DO THIS!
Click to expand...
Click to collapse
Big thanks
As for my Android ID, I didnt know about it until afterwards. The posts that inform people about flashing and Rooting should mention this, because I didn't see it anywhere until after I was worrying about my phone not being able to connect to my email, but for some reason this morning when I tried it miraculously worked.
As for #3, where is my system folder? is it: I:\media\audio\ringtones ?
with my "system" being "I:"
I recently discovered setting custom sounds for my email accounts, but I am curious about all the default tones.
Are all the ones listed in different setting all just the same file with the exception that they only play for "X" amount of type depending on menu your are in?
And can the captivate not play MIDI files?....you know, old school polyphonic files........
And how the heck do I change the text tone for while my phone is plugged into the USB? omg it is the most annoying sound in the world, why does it not use the tone I have my texts set for? (I forgot this one on my list)
Thanks for your answer to #11. My phone hadnt done it at all until I dropped it down about 10 feet at a concert screen down 6 days after I got it. The next day the phone did the reset thing and I just about cried cuz I was just like I know it's because I dropped it. On the bright side when I picked it up after it fell, it didnt have a scratch on it or nothin'.
How do you alter a .vcf file?
WandererTJ said:
Big thanks
As for my Android ID, I didnt know about it until afterwards. The posts that inform people about flashing and Rooting should mention this, because I didn't see it anywhere until after I was worrying about my phone not being able to connect to my email, but for some reason this morning when I tried it miraculously worked.
As for #3, where is my system folder? is it: I:\media\audio\ringtones ?
with my "system" being "I:"
I recently discovered setting custom sounds for my email accounts, but I am curious about all the default tones.
Are all the ones listed in different setting all just the same file with the exception that they only play for "X" amount of type depending on menu your are in?
And can the captivate not play MIDI files?....you know, old school polyphonic files........
And how the heck do I change the text tone for while my phone is plugged into the USB? omg it is the most annoying sound in the world, why does it not use the tone I have my texts set for? (I forgot this one on my list)
Thanks for your answer to #11. My phone hadnt done it at all until I dropped it down about 10 feet at a concert screen down 6 days after I got it. The next day the phone did the reset thing and I just about cried cuz I was just like I know it's because I dropped it. On the bright side when I picked it up after it fell, it didnt have a scratch on it or nothin'.
How do you alter a .vcf file?
Click to expand...
Click to collapse
I agree, all Custom ROM threads should have a little blurb about it for people installing their ROM from a new stock device. But it seems to be fixable even if you didn't with a little work, so it's not too bad.
You can use Root Explorer to copy them to /system/media/audio/ringtones, but I think they may have to be in .ogg for them to work out of this directory. I'm not entirely positive, but all you would have to do to test it is push a non-.ogg ringtone over and try it. To copy your ringtones over nice and easy like;
Download the Android SDK and extract the android-sdk-windows folder to your desktop for easy copy pasta!
And enable USB Debugging (Menu > Settings > Applications > Development > USB Debugging)
Open a command prompt!
cd %USERPROFILE%/desktop/android-sdk-windows/tools
adb push [ringtone] /system/media/audio/ringtones
Click to expand...
Click to collapse
that's in a perfect world where it won't complain about permissions. if it does;
cd %USERPROFILE%/desktop/android-sdk-windows/tools
adb push [ringtone] /sdcard/
adb shell
su - at this point, accept superuser request on the phone; make sure the screen isn't locked when you hit enter, prompt should change from a $ to a #
mv /sdcard/[ringtone] /system/media/audio/ringtones/
exit
exit
Click to expand...
Click to collapse
I'm not sure if the Captivate can play .MIDI files for notification sounds. Only one way to find out though, right?
And i have no idea why your text tone is different when plugged into USB...mine sounds the same.
Late edit: forgot to answer one of em, you can edit .vcf files in MS Outlook!
# 9 - unfortunately our phone doesn't have FM radio. Another one to try is iheartradio. They have a number of radio stations. Although you're still using data unless you're using wifi like mentioned above.
Are there any better phonebook editors other than Outlook express?
I am looking for something so that I can have multiple phonebooks such as one with all my contacts I've ever had, and another for just the contacts I want on my phone
if you have a custom ringtone set for something and you have the phone plugged into usb, the phone can't access the the SD card where the custom tone is stored, thus you get that annoying (and loud) built in tone.
Re: myfiles: it does indeed let you install apps, but I'd recommend estrongs file explorer. It allows you to not only browse you're phone, but your pc files too (assuming it's on the same network, of course.) And let you open, copy and edit between the 2 devices.
Re: allshare: out of the box this great app let me browse and watch all of the video files off of my PC. I didn't have to configure anything special, except that my PC was already configured to share media with my xbox 360.
But I didn't do anything on my pc after buying the phone. Just connected to wifi and everything showed up. I haven't tried sharing the other way though (watching media from my phone on my PC)
Sent from my SAMSUNG-SGH-I896 using XDA App
#12. I've used Wifi Android Manager Wifi, I think it backs up text messages. It seems to back up everything else, that's for sure.
Hey, I've been working on adding answers to the OP, it's going, but I'm not done
Anyways, UPDATE 1/17/11 - I've Added Questions 15-21, please try and answer these when you get the time.
Added Answers to questions: 1, 2, 4, 5, 9
Added Parts B and C to #6
Added Questions: 15,16,17,18,19,21
***** Updated June 3, 2011 *****
Thanks again to everyone who helped with the beta testing. Just wanted you to know that I just posted version 1 to the Android Market. It's free and you can get it here:
https://market.android.com/details?id=com.greggreno.whattowatch
-Gregg
***** Updated May 5, 2011 *****
Uploaded a new version to the same location. Here are the changes:
- Improved the scrolling position after adding more titles to the bottom, but still not perfect
- Fix bug leaving the Netflix registration window open
- Set maximum title list retrieval to 50 at a time
- Fixed bug with extra Edit Search Criteria icon showing in apps list
- Fixed size and look of loading images
- Added ability to turn off ads by buying an unlocker from the Android market
Netflix still hasn't fixed their problems with TV series and getting the data right in their API
***************************
Hi all. I've been working on a new Honeycomb only app called What To Watch, and I'm looking for some beta testers. Anyone interested in helping out?
I wanted a better way to browse for Netflix movies and also manage my queues. For example, I wanted to do something like "show me all Sci Fi movies available on Instant with a 3 star rating or higher, rated PG-13 or R, sorted by release date". I couldn't find any other web site or app to do this, so I figured I would build it myself.
There are 3 main sections:
1) My Searches - this is where you can create your own searches and save them for later. I create two to start with. Click on one and it will display the list in the panel on the right, 25 at a time. Once you click on one of the My Seaches items, you can edit it by long pressing it or clicking the Edit button at the top. Note that this uses a beta API from Netflix called OData. It's the only API that lets you do sophisticated searches like this, but unfortunately it is subject to change from Netflix and it may not always be current with the main Netflix library.
2) Netflix Queues - what you would expect. For example, what is in your DVD and Instant queues.
3) Top Lists - this comes from the Netflix web site rather than the API. It shows what the top titles are for each category. This method won't show the star ratings until you drill into a particular title.
You can download the apk here (note this is case sensitive):
http://jigawattlabs.com/temp/WhatToWatch.apk
Known issues:
This is the first release. Should probably call it an Alpha!
Authenticating with Netflix isn't quite right yet. You may wind up with the web browser still open after exiting the app, and you may get another instance of the app. But just exit everything and it should be ok
There is a bug with the Netflix API with TV series and specials. This is a problem on their end, so you might get some unexpected results when browsing TV shows
I would appreciate any and all comments in terms of general UI impressions, bugs, performance, usability.
You can reach me directly at [email protected].
Thanks!
-Gregg Reno
I just tried it out, seems to work great. I just wish there was a way to actually watch Netflix on my zoom
Thanks for trying it out. I'd love to be able to watch netflix movies as well, and I think we will see that at some point. Hopefully once Netflix makes that possible, I can integrate that into the app.
I'm also going to implement a friends feature, where you can mark your favorite movies and share it with friends, and see what their favorites are.
Comments from other folks are welcome!
My first impression of the app is that it has some shared elements with amazon's web page, which is great. But the reason I say first impression is that it isn't registering with netflix.
Sent from my Xoom the way it should be, rooted and with SD card.
chbennett - thanks for testing. Can you give me some more info on the problem you had registering? When clicking almost anything it should prompt you to register. If you say ok, it should take you to a Netflix web page. You may have to log in and then it should prompt you to give permission to the What To Watch application. If you approve,it should take you back to the app and you should be able to run any of the searches on the left.
Where did you run into problems?
I installed it on my XOOM. Log in into Netflix without any problems. Searching also good, but could be good to add additional information about movie like Availability (for some of it shows when it will be available in stream).
It's a pity that we still missing Hulu or Netflix apps on our XOOM. Get used to watch it on my iPad(
greno1 said:
chbennett - thanks for testing. Can you give me some more info on the problem you had registering? When clicking almost anything it should prompt you to register. If you say ok, it should take you to a Netflix web page. You may have to log in and then it should prompt you to give permission to the What To Watch application. If you approve,it should take you back to the app and you should be able to run any of the searches on the left.
Where did you run into problems?
Click to expand...
Click to collapse
Basically all it did for me (ill try it again) was stall out on the "registering with netflix" in app pop up, going no further.
Edit: still doesn't work
Sent from my Xoom the way it should be, rooted and with SD card.
Great app! Forcecloses when I click on New Instant Choices under Top Lists category
Also when going into the Instant Que list; I click one of the movies and it takes me to the description. I can also click on Similar, Drop from Instant or Add to Disc. If I choose Drop from Instant and click the back arrow it still shows in the Instant Que listing. Can we have the option of clicking the Instant Que button on the top left corner in the movie description to go back to the Instant Que listing and if we do happen to press the back arrow could the Instant Que listing automatically update with the removal of the movie?
Kozdoba - I will be adding additional information like directors and awards, but I'll also look at adding availability. Do you have an example title in mind I can test with?
bishop72 - thanks for finding the problem with the New Instant choices. I'll look at that one, but it may be because that's a really big list and I'm not handling it correctly. Also, good idea about removing titles from the instant titles if you click the remove from instant button. But the problem with that for me is if I remove it from the list, it should probably close that title window because it's no longer in the instant queue. Maybe someone hit the remove button by mistake and they want to re-add it?
Also I notice that there is some type of caching going on with the adding and removing from queues. When you add or remove, it does that action and then sends another request to netflix to get the current status. But it may not register that quickly. So you may hit remove from instant, and then I get back a status from Netflix saying it's still in the instant queue. If you click it again, it shows up ok.
I appreciate the feedback - good or bad!
greno1 said:
Kozdoba - I will be adding additional information like directors and awards, but I'll also look at adding availability. Do you have an example title in mind I can test with?
Click to expand...
Click to collapse
Look this series soon will be available online.
http://movies.netflix.com/WiMovie/Death_Note/70081003?trkid=2361637
downloaded the apk to nook but just got a parse error failed to load. I really love my netflix and was looking forward to tablet style look on nc.
The app installed fine, the Netflix login auth worked fine as well. The fit & finish look good as well. Some of the images and searches render a bit slow, but that could be my wifi. I will play with it more through the day and report back.
I believe i heard that Netflix was going to do a live stream with Netflix only productions, so a Top List of Netflix Original or something would be good.
Everyone - thanks for testing and for the comments. I really appreciate it! It's interesting it worked for some but didn't work for dbolton. Not sure why that is.
dbolton - can you post a screen shot of your error, or email it to me at [email protected]? I also took a few screen shots so you can see what it should look like:
http://jigawattlabs.com/w2w/screen1.png
http://jigawattlabs.com/w2w/screen2.png
kiteOregon - once Netflix posts a list of their own content in some type of list, I'll definitely look at adding that. For the Top Lists section, I'm just using the Netflix RSS feeds linked from the bottom of the page. Modified it somewhat to return no more that 50 at a time though since it would load too slow.
Thanks again!
-Gregg
Thus far all is working well. I really like the interface too, great job!
I am going to keep tinkering with it and let you know if I run into any issues or have any suggestions.
Thanks for the great app!
chbennett said:
Basically all it did for me (ill try it again) was stall out on the "registering with netflix" in app pop up, going no further.
Edit: still doesn't work
Sent from my Xoom the way it should be, rooted and with SD card.
Click to expand...
Click to collapse
I heard that Netflix was having problems with authorization from 3rd party apps. As a work around the suggest launching your browser and log into Netflix. Leave the browser running, and then launch the app and try to register again. Can you let me know if that works?
-Gregg
garyh2 said:
Thus far all is working well. I really like the interface too, great job!
I am going to keep tinkering with it and let you know if I run into any issues or have any suggestions.
Thanks for the great app!
Click to expand...
Click to collapse
Thanks! Working to add more features.
somehow I now have a 'edit search criteria' icon (same as main apps icon) in my app drawer as if it were a separate app.
My initial reaction is very positive, but I have the same issue as garyh2. When I tell it to uninstall, I am informed that it is part of the main application so obviously I left it there. This is a weird bug though...
The only other thing I noticed is that the placeholder icons that appear before titles and images populate are slightly larger than the images and titles that replace them. This doesn't really cause problems but is slightly distracting.
I really like the power search function and the ability to save searches and haven't really seen this functionality elsewhere. Good job!
Thanks garyh2 and vidriera - ill take a look at that. The edit screen is a separate activity rather than a fragment, which is probably its somehow getting its own icon. Just one of the differences with honeycomb I need to figure out.
Also good point about the loading graphic. I'll fix that too.
Hi there. Been using the Z3C all week and really enjoying it, but I've found one persistent problem with one of the built-in apps and am hoping someone here might be able to point me in the right direction for getting a fix.
I'm unable to get the Live On YouTube camera app (v 01.00.21) to sign in to my Google account. Firing up the app, I get the page requiring me to read and accept the terms and conditions of use. Fine, accepted. I then get the popup outlining the permissions - no problem, accepted. After this message disappears, I get a few seconds of the "loading" animation and then a popup tells me "Your YouTube account does not have the necessary permissions to create a live stream. Want to change your permissions now? ||No|Yes||".
When the error first occurred it was right enough - logging into YouTube on desktop I was able to establish that I didn't have live streaming enabled but despite now having enabled it, the camera app still returns the error saying my account doesn't have the necessary permissions. If I hit "Yes" it loads a YouTube URL and now when I land on the site there's a popup saying "You are already enabled for this feature".
I've tried wiping all the Live On YouTube application data via settings, I've tried uninstalling the app and reinstalling, but I keep getting hit with this error.
Can anyone suggest anything else I might want to try to get this feature working? Or does anyone have a suggestion of a better place to ask the question if it doesn't belong in this forum?
I can get mine working or at least set up ok, however, upon trying to run the option I just get a 'Creating Live Event' dialogue that stays on forever.
Its rather annoying I can do a share to my social media network of choice, so people can get to the right web page to see my live event, I just can't seem to get the phone to actually start streaming, despite setting up youtube ok. Has anyone yet managed to do a youtube live broadcast from their phone, and if so, can they detail what they did please.
I had this issue too. It was because I had 2 youtube profiles on my google account, so I enabled Live permissions on both profiles, and it worked.
Burlingtonrox said:
I had this issue too. It was because I had 2 youtube profiles on my google account, so I enabled Live permissions on both profiles, and it worked.
Click to expand...
Click to collapse
We have a winner!
I was using YT under my original username, not realising that this meant my G+ identity had a whole separate profile on YT. Switched over to the "real name" profile and found live streaming wasn't enabled there. Enabled it and Robert is now my father's brother.
Fixed! Thanks very much.
How about the 'Creating Live Event' dialogue that stays on forever. Do you have that or does your stream ok.
techguyone said:
How about the 'Creating Live Event' dialogue that stays on forever. Do you have that or does your stream ok.
Click to expand...
Click to collapse
Hi techguyone, the first time I tried it I got your message for a few seconds before it came back with an error message saying "unable to create live event". When I retried I got your message again for another few seconds before it appeared to work. I'm still waiting on the processing, but both the "failed" event and the longer test are now visible in my uploads, even if I can only currently view the (very short) failed one.
It looks like it's going to work for me.
Have you tried the old clearing-out-the-app-data-via-settings trick already?
Mine worked eventually, but its still kinda clunky, interestingly enough I found the other live app (Facebook one) to work straight away, and was a lot easier. I think I'll be using Facebook over Youtube in the future for any impromptu streaming.
This worked for me...
What I did is that I clicked on the avatar in the upper left corner of the screen,and scrolled down and signed out,and the signed in again with one of my two existing youtube accounts,and accepted all the terms and everything again from the beggining....Then I pressed the record button, it took a while to create an event,but it actually started the live streaming!!!!! :
Greetings everyone,
https://youtu.be/T9aKmLTujik
What you see above is a "Control Panel" for my own Galaxy S7 Edge. I host this on my own website.
This means it can be seen and accessed from anywhere in the world, on any browser and/or device.
For privacy and security, I will implement a login system in the near future.
It has a couple of neat features, but since they are written in Dutch I will translate them to English:
Information:
Check battery level/percentage and check if your phone is being charged or not
Warns the user from the control panel if the battery is low.
Warns the user from the control panel to pull out the plug out of charging when it is fully charged
Check if your phone is in a light or dark place. I have optimized the light sensor as best as I could, The results are pretty accurate
Clipboard of your current copied content on your phone
Shows the phone model and the date and time of the last update sent from your phone
Check if Bluetooth is enabled or not
Check if Wifi is enabled or not
Show the current WiFi name, Wifi Speed, Wifi Channel & Wifi Signal Strength
Show the current Data Carrier / Mobile Signal strength (Weak, Normal, Strong)
Shows the current Call Volume percentage
Shows the current Media Volume percentage
Check if the screen of the phone is turned on or off
Check if GPS is enabled or not ( There is also a Live Google Maps on the right side, showing where the phone is right now )
Checks if the phone in call / calling / or getting called. ( in other words, it shows the user is busy with a phone conversation )
Checks if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
I am surprised at the speed of the operations.
It takes a total of 3 to 4 seconds after clicking on "take a picture" button to take a picture from the front-camera and Upload it to my google drive.
It also removes the picture from my phone after it has been uploaded. WIth combination of SMS control this can be a great anti-theft option.
The "Record Audio" function works great too. after clicking on it on the control panel, it starts recording audio, waits 10 seconds ( records for 10 seconds ), stops recording audio and then uploads it to a special folder in my Google Drive.
The "Send SMS" function is very fast. after clicking on it, it will take about 1.5 seconds to send the SMS from your phone.
For now, the number to send the SMS to is hardcoded, but I will make it a variable so that it will be possible to type in the number on your web control panel and send the SMS to the number from your browser.
The "LOCK your phone" function immediately lock your phone remotely, even when your screen is turned off. You can unlock it with the code that has been set up in the Tasker Event.
Clicking on the Wifi, Bluetooth & GPS icon will toggle them( on / off )
Clicking on the Phone (screen) Icon, Will toggle the phone screen ( turns it on and off )
Clicking on the Clipboard icon will copy all the content to your own clipboard.
Not only the text but the icons also change dynamically.
Grey icons represent a false variable (turned off / dark / not in call & etc ) and the blue icons represent the true variables.
For example, in the screenshot above, Bluetooth is turned off and wifi is turned on.
When the battery gets at 15% or less, the icon will turn red and green when it's fully charged (100%) and the user will get an alert box warning with a notification sound straight from the browser about the low battery / full charge . ( Sound and notification can be turned off if you wish).
I have wrote a script with AJAX (Asynchronous JavasScript and XML) to do all of this in Real-time and without page-reloads. AJAX refreshes the page information every second (or whatever the user wants) without reloading the page.
The controls in this control panel are in many cases and in my experience a lot faster than Android Device Manager or other apps like Cerberus and Airdroid.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- On Tasker, I have used Taskers own variables but also created my own variables to be created/changed on certain triggers.
For example, when the lx level ( light sensor ) gets low, it will set a variable to "false" as boolean, meaning there is not enough light == it is dark.
- Next I use this variable in my HTTP POST Request URL to a very simple PHP script on my website I wrote..
The HTTP POST Request URL will post to my PHP Script.
My PHP script grabs the URL, strips certain parts of it, turns it into PHP variables and then sends it to my MySQL database ( all on my own hosting).
- I again use the wonderful Tasker to do all of this this every 2 seconds.
You can get (almost) real-time information about your phone if it's set to be updated every 1 second.
This will not be very heavy on the database so it's possible.
- I then made another webpage containing another simple PHP script that grabs all the variables ( those we saved in previous steps) from my Database and echo's (shows) it on the screen.
This is the very same page you see on the screenshot, This is the Control Panel.
In the last step, all we have to do is visit the webpage on my website.
It will show the control panel as seen in the screenshot. You will also be able to control your phone from here.
I am making a simple login function where users can login.
this means a single database can hold more than 1 user if you wish to.
This will also protect others to see/control your phone from the web as they will need login credentials.
My script will then grab the corresponding variables of your phone when you login, using your ID and checking it on my database.
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
All you need is:
- My Tasker project files ( all you need to do is import it to your own Android )
- Your own webhosting with MySQL database and PHP.
There are TONS of FREE online webhosting that will offer exact this. I'd love to post all the links here, but i'm not sure if it will be seen as advertising, so let me know.
- My PHP script(s), all you need to is simply upload it to your own website.
- My MySQL database configuration file - After importing this single file, the whole database will be created automatically on your website. ( using MySQL on your hosting )
After that, and when my Login function is complete, you could create an account for your self and/or others where they can login from anywhere in the world, on any browser or device and check their phone status and control their phone in Real-Time.
Sicariux said:
Greetings everyone,
i63.tinypic.com/20jsimh.png
What you see above is a "Control Panel" for my own Galaxy S7 Edge. I host this on my own website.
This means it can be seen and accessed from anywhere in the world, on any browser and/or device.
For privacy and security, I will implement a login system in the near future.
It has a couple of neat features, but since they are written in Dutch I will translate them to English:
Information:
Check battery level/percentage and check if your phone is being charged or not
Warns the user from the control panel if the battery is low.
Warns the user from the control panel to pull out the plug out of charging when it is fully charged
Check if your phone is in a light or dark place. I have optimized the light sensor as best as I could, The results are pretty accurate
Clipboard of your current copied content on your phone
Shows the phone model and the date and time of the last update sent from your phone
Check if Bluetooth is enabled or not
Check if Wifi is enabled or not
Show the current WiFi name, Wifi Speed, Wifi Channel & Wifi Signal Strength
Show the current Data Carrier / Mobile Signal strength (Weak, Normal, Strong)
Shows the current Call Volume percentage
Shows the current Media Volume percentage
Check if the screen of the phone is turned on or off
Check if GPS is enabled or not ( There is also a Live Google Maps on the right side, showing where the phone is right now )
Checks if the phone in call / calling / or getting called. ( in other words, it shows the user is busy with a phone conversation )
if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
I am surprised at the speed of the operations.
It takes a total of 3 to 4 seconds after clicking on "take a picture" button to take a picture from the front-camera and Upload it to my google drive.
It also removes the picture from my phone after it has been uploaded. WIth combination of SMS control this can be a great anti-theft option.
The "Record Audio" function works great too. after clicking on it on the control panel, it starts recording audio, waits 10 seconds ( records for 10 seconds ), stops recording audio and then uploads it to a special folder in my Google Drive.
The "Send SMS" function is very fast. after clicking on it, it will take about 1.5 seconds to send the SMS from your phone.
For now, the number to send the SMS to is hardcoded, but I will make it a variable so that it will be possible to type in the number on your web control panel and send the SMS to the number from your browser.
The "LOCK your phone" function immediately lock your phone remotely, even when your screen is turned off. You can unlock it with the code that has been set up in the Tasker Event.
Clicking on the Wifi, Bluetooth & GPS icon will toggle them( on / off )
Clicking on the Phone (screen) Icon, Will toggle the phone screen ( turns it on and off )
Clicking on the Clipboard icon will copy all the content to your own clipboard.
Not only the text but the icons also change dynamically.
Grey icons represent a false variable (turned off / dark / not in call & etc ) and the blue icons represent the true variables.
For example, in the screenshot above, Bluetooth is turned off and wifi is turned on.
When the battery gets at 15% or less, the icon will turn red and green when it's fully charged (100%) and the user will get an alert box warning with a notification sound straight from the browser about the low battery / full charge . ( Sound and notification can be turned off if you wish).
I have wrote a script with AJAX (Asynchronous JavasScript and XML) to do all of this in Real-time and without page-reloads. AJAX refreshes the page information every second (or whatever the user wants) without reloading the page.
The controls in this control panel are in many cases and in my experience a lot faster than Android Device Manager or other apps like Cerberus and Airdroid.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- On Tasker, I have used Taskers own variables but also created my own variables to be created/changed on certain triggers.
For example, when the lx level ( light sensor ) gets low, it will set a variable to "false" as boolean, meaning there is not enough light == it is dark.
- Next I use this variable in my HTTP POST Request URL to a very simple PHP script on my website I wrote..
The HTTP POST Request URL will post to my PHP Script.
My PHP script grabs the URL, strips certain parts of it, turns it into PHP variables and then sends it to my MySQL database ( all on my own hosting).
- I again use the wonderful Tasker to do all of this this every 2 seconds.
You can get (almost) real-time information about your phone if it's set to be updated every 1 second.
This will not be very heavy on the database so it's possible.
- I then made another webpage containing another simple PHP script that grabs all the variables ( those we saved in previous steps) from my Database and echo's (shows) it on the screen.
This is the very same page you see on the screenshot, This is the Control Panel.
In the last step, all we have to do is visit the webpage on my website.
It will show the control panel as seen in the screenshot. You will also be able to control your phone from here.
I am making a simple login function where users can login.
this means a single database can hold more than 1 user if you wish to.
This will also protect others to see/control your phone from the web as they will need login credentials.
My script will then grab the corresponding variables of your phone when you login, using your ID and checking it on my database.
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
All you need is:
- My Tasker project files ( all you need to do is import it to your own Android )
- Your own webhosting with MySQL database and PHP.
There are TONS of FREE online webhosting that will offer exact this. I'd love to post all the links here, but i'm not sure if it will be seen as advertising, so let me know.
- My PHP script(s), all you need to is simply upload it to your own website.
- My MySQL database configuration file - After importing this single file, the whole database will be created automatically on your website. ( using MySQL on your hosting )
After that, and when my Login function is complete, you could create an account for your self and/or others where they can login from anywhere in the world, on any browser or device and check their phone status and control their phone in Real-Time.
Click to expand...
Click to collapse
It looks like a great project.
Checks if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
Click to expand...
Click to collapse
What about checking the network traffic to know whether the user is browsing or not?
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
Click to expand...
Click to collapse
Even Open Source? That rocks.
XDA's Tasker subforum isn't that popular. You might wanna post your project on reddit too, where the Tasker community is way bigger and more popular:
https://www.reddit.com/r/tasker/. Let us know if you'll post it there too.
I'm looking forward for this project. Personally, I don't think I would use this as I don't think I really need it (although it doesn't hurt to have an anti-theft), but I'd like to see how it is done, if you're gonna make it Open Source.
Good luck!
Hi and thanks for your reply!
What about checking the network traffic to know whether the user is browsing or not?
Click to expand...
Click to collapse
Do you mean any random network traffic? in that case, a simple incoming whatsapp message could trigger the browser variable and set it to "true".
I will try reddit ... I have tried posting it in the official Tasker forums, but the my post is still awaiting moderator approval after a long time.
Since i've posted this thread, I've created new functions already like video recording (microphone audio included) the phone screen for 10 seconds and upload it to google drive.
I haven't seen this option on any other anti-theft yet. In a case of emergency, you could literally watch the thief do things on your phone and also hear him talking.
Since it's going be to open-source, it's highly customizable. You could change the icons, add new functions, remove functions , change the styling to your own wishes and improve the "web app" overall.
For those interested, Since the first post, I've added more options and starts looking good
https://youtu.be/T9aKmLTujik
For rooted users, you could make an add-on app that the user puts in the /system partition and, in case of factory reset, installs Tasker and restores it's data.
That way, the user has a chance of finding their phone even if the thief performs a factory/hard reset.
EDIT: Are your files available? I can't seem to find them.
Vagelis1608 said:
For rooted users, you could make an add-on app that the user puts in the /system partition and, in case of factory reset, installs Tasker and restores it's data.
That way, the user has a chance of finding their phone even if the thief performs a factory/hard reset.
EDIT: Are your files available? I can't seem to find them.
Click to expand...
Click to collapse
With the new Android versions, this is not a reliable thing anymore. This is the same reason Cerberus App stopped offering a special APK that could be installed in the /system by flashing it.
Also, it would be very difficult to have an add-on app install Tasker, AutoRemote, FolderSync and other plugins it needs automatically and configure them too.
I haven't made my files available yet. I am still perfecting it and awaiting community tips and input to expand the app more before releasing the source-files.