[how to]remove your "tampered" banner - HTC Desire 510

*this thread is for desire 510 it will NOT work on m7(or anything older). search your device general forum for a specific thread
if you have recently s-off'ed using an exploit that did not remove your tampered banner from the bootloader screen,then this thread is for you.
*you must be s off.
*you must have superuser installed
read this:
this will not work if your s on
the usual disclaimers:
i have tested this my cricket desire 510 variant(a11_ul),but use this info at your own risk. if it melts your phone into a little pile of plastic goo,its not my fault.
credits
-beaups for schooling me on echo command protocol
--strace for originally discovering the location of the lock status flag(check out this thread for more info) wich started off my love for chasing such things.
IF you are an advanced user with adb/fastboot set up and some basic knowlede of the cmd window,you can skip to #2
1)set up adb(windows 7 and lower)
-download this file
-install drivers: if you have htc sync installed,you should allready have drivers. if not,you can install htc sync,or install these modified htc drivers from revolutionary (driver mirror)
-unzip your miniadb_v1031.zip file. this is native funtionality in windows 7. you otherwise may need a utility such as "7-zip" to extract,or unzip it. place the unzipped folder onto the root of your C drive on your PC. root means the top level,not inside any folders. so just copy and paste,or drag and drop the folder onto C with everything else that is there. you may want to rename it to "miniadb_m7" since youll be putting some device specific files in here.
-open a command window. on windows 7,click the start bubble in the lower left and type "command" in the search box. xp i believe is similar or the same. doing this should open a small black command window.
-change to your miniadb_m7 directory. type the following at the prompt in your cmd window:
cd c:\miniadb_m7
your command promt should change to "c:miniadb_m7>" provided you: 1)unzipped the miniadb_v1031 zip file,and 2)put the folder on your c drive,and 3)entered the name of the folder correctly ("miniadb_m7" in this case)
-now make sure usb debugging is checked in developer options(you will need to turn it on first),and plug your phone into your PC with a usb cable
-make sure your phone is being recognized- type:
adb devices
if your drivers are installed correctly,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,then enter this command:
adb reboot bootloader
this should take your phone to the "fastboot" screen,wich is white with colored letters. this is one mode of your bootloaders interactive modes. at the top youll see fastboot devices as confirmation youre in fastboot.
now enter:
fastboot devices
again,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,you can enter the following to boot back to the phones OS:
fastboot reboot
and now,youve installed adb/fastboot and tested youre phones drivers. if at either spot,you have trouble and dont get your serial number back,there is some sort of connection issue. use these steps to troubleshoot:
troubleshooting connectivity issues:
-try a reboot of the PC
-try different usb cables and ports
-dont use a usb hub
-dont use usb 3.0
-make sure nothing capable of comunicating with the phone is enabled and running. htc sync,pdanet,easy tether,and even itunes have all been known to cause issues.
-windows 8 has been known to have issues. try a windows 7 or older machine
failing the above,
-i use these drivers for fastboot and adb(donwload and run as admin): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe (mirror)
failing that,try manually updating the drivers in the following manner:
-put the phone in fastboot mode(select fastboot from the hboot menu)
-open device manager on the PC
-plug in phone,watch for it to pop up in device manager.
-update drivers with device manager,pointing the wizard to the extracted
driver download folder from above
note that you can check the connectivity of the phone,and make sure drivers are working by in the following manner:
-open cmd window. change to directory containing adb/fastboot utilities
-adb with the phone in the booted OS,usb debug enabled,enter:
adb devices in a cmd window
-fastboot with phone in fastboot,enter:
fastboot devices in cmd window
in either case,a properly connected phone with working drivers installed should report back the phones serial number.
Click to expand...
Click to collapse
this process,in your cmd window,should look something like this:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Scott>[COLOR="red"]cd c:\miniadb_m7[/COLOR]
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAxxxxxxxxxx device
c:\miniadb_m7>[COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m7>[COLOR="red"]fastboot devices[/COLOR]
FAxxxxxxxxxx fastboot
c:\miniadb_m7>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.037s
c:\miniadb_m7>
2)reset your "tampered flag"
enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00' | dd of=/dev/block/mmcblk0p6 bs=1 seek=5314564
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify tamered is gone
other useful threads:
lock/unlock without htcdev: http://forum.xda-developers.com/desire-510/general/how-to-lock-unlock-bootloader-htcdevs-t3179874
if this does not work for you
*first reread this thread in its entirety. make sure you have met the prerequisites,and double check your code and make sure you have not forgotten a step,or screwed something up trying to type it (especially if using a terminal emulator),and check that you have not gotten any errors.
if youre still confident you did things correctly,you need to PM me:
1)the results of: fastboot getvar all
2)a link to an uploaded p6.
you get fastboot getvar all by:
-place phone in fastboot
-enter in fastboot getvar all right click,click mark,highlight in white,hit enter or right click to copy
you dump p6 by:
adb shell
su (if needed to get a #)
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6
transfer the file on internal storage to your pc and upload it
im not trying to be a ****,but its not helpful to post "didnt work" if you screwed something up,or if your not willing to help find a solution. especially if others have found it to work on their same variant.
important:
from now on,i will need a copy of your cmd window as well if we want to get to the bottom of whats happening. some folks seem to be simply writing extra bytes,wich is screwing up the flag location. please make sure this shows an entire session,not just a last part where it looks correct. we cant figure it out if you only show part of what you did.

one more

scotty1223 said:
one more
Click to expand...
Click to collapse
btw.32bit Desire 510 Cricket support WCDMA?

bl4ckluna said:
btw.32bit Desire 510 Cricket support WCDMA?
Click to expand...
Click to collapse
Yes
Sent from my HUAWEI ALE-L04 using Tapatalk

find Problem....that device only Support WCDMA USA Band....not support ASIA (

Correct me, please.
Correct me if I'm wrong, please! But isn't the only way, currently, to get S-off for our phone, is to pay $25 when using Sunshine?

JimFritzMI said:
Correct me if I'm wrong, please! But isn't the only way, currently, to get S-off for our phone, is to pay $25 when using Sunshine?
Click to expand...
Click to collapse
Sunshine is one way to skin the cat. I am Not sure if there are others
Sent from my HUAWEI ALE-L04 using Tapatalk

That seems like an elusive answer...
scotty1223 said:
Sunshine is one way to skin the cat. I am Not sure if there are others
Sent from my HUAWEI ALE-L04 using Tapatalk
Click to expand...
Click to collapse
Almost as if there were other ways...
I seriously considered paying for it to be done, when I first started. However, I can't seem to find a reason to do so.

this is great. but how do you get S-OFF on the desire 510.
also if you get S-OFF won't that void the warranty anyway?

Related

[Q] ADB & Win7 x64 nightmare, tried everything

for about 4 days now I've been trying to get ADB to work on my phone following these instructions;
http://forum.xda-developers.com/showthread.php?t=858118&highlight=adb
I've tried everything and so far I can't get past "adb devices" when I do so I get the message "adb is not recognized as an internal or external command"
what exactly am I doing wrong and how do I fix it? I've installed JDK & downloaded the android SDK package, in device manager the phone is recognize as "Android ADB interface"
I'm ready to chuck this phone against the wall at this point
oceanisbleu said:
for about 4 days now I've been trying to get ADB to work on my phone following these instructions;
http://forum.xda-developers.com/showthread.php?t=858118&highlight=adb
I've tried everything and so far I can't get past "adb devices" when I do so I get the message "adb is not recognized as an internal or external command"
what exactly am I doing wrong and how do I fix it? I've installed JDK & downloaded the android SDK package, in device manager the phone is recognize as "Android ADB interface"
I'm ready to chuck this phone against the wall at this point
Click to expand...
Click to collapse
Double check your path...
"Now type cd\AndroidSDK\tools\"
My path is c:\android-sdk-windows\tools\
I've renamed the file to AndroidSDK & placed it directly in C:/ so for me it's C:/ AndroidSDK/tools/
doesn't work...
-I plug the phone in and it's recognized as "Android ADB Interface" in device manager
-I open easy tether on the phone then right click on the pc & click connect then it says connection established via Android ADB.....
-I open CMD
-I type cd\
-then cd\AndroidSDK\tools\
-then adb devices & this is where I want to break everything because I can never get past this part and all I see is 'adb' is not recognized as an internal or external command.......
I hate this phone lol & wish I had the money to get the evo so I can put this thing in the trash, I just want to setup firerat's and that's the main reason why I want to establish ADB, is there any way it can be done without ADB????
thanks for trying to help, I hope someone can still figure this out for me
If you downloaded the newest SDK, then the problem might be that you are looking for adb in the wrong directory. It is no longer located in \tools. It was moved to the \platform-tools directory
Sent from my HERO CDMA using xda premium
In the morning I'll give a more detailed instructions, but you need to add the platform-tools folder to your PATH.
Sent from my HTC Hero making C.R.E.A.M.
dastin1015 said:
In the morning I'll give a more detailed instructions, but you need to add the platform-tools folder to your PATH.
Sent from my HTC Hero making C.R.E.A.M.
Click to expand...
Click to collapse
I have just added this exact directory to the end of my PATH
;C:\AndroidSDK\platform-tools\
rebooted, opened cmd, typed adb devices and still I get ADB is not a recognized command.
I went to HTC's site & downloaded the latest hero sync software (new version just came out 2 days ago) when I plugged my phone in it re-installed the drivers, tried it again and nothing!!
I did notice that after the HTC Sync installation in device manager the phone is no longer Android ADB Device, now it says MY HTC, did Sync ruin my ADB drivers?
Ok. So were you at with this???
Shoot me a pm if you still need assistance.
Edit: From reading your post I think your not changing the directory first.
So open up the cmd window. And type cd\ "then hit enter"
Thenn type.
cd\AndroidSDK\platform-tools\
And hit enter.
Then type. "adb devices" without the quotes. And see if that will show your serial number.
If that yeilds no results then try
cd\android\SDK\tools\
And hit enter.
Then type "adb devices" without the quotes. And hit enter and see if that will return your serial number.
Locked & Loaded
" Shooter on Deck"
Thanks guys for all the help you have provided, I have finally figured it out using this guide;
http://forum.xda-developers.com/showthread.php?t=532719
slightly different than the first guide I followed, instead of editing the PATH a new Environment Variable was created also a slightly different CMD code to get to ADB;
cd C:\android-sdk-windows\platform-tools === Press Enter
adb devices === You should see your device listed
adb shell === you should see # in the next line
I hope this helps anyone else who might have the same issue.

[Q] Help with bricked HTC One

I've been a lurker for the last few years; never thinking I would need any help or assistance .. but I have a situation ..
My Sprint HTC One was working better than I had ever seen it just last Thursday. I was running CM11, with ART. I had an old version of SuperOne (Sense 5) backed up with TWRP. I thought I'd go ahead and load the backup, and update all the apps and then make another more recent backup before returning to CM11. I got as far holding the power button and selecting recovery. The phone locked up at that point.
It took 10 minutes to get it back to the screen where you can select fastboot, factory reset, etc. Interestingly I couldn't get into TWRP. The screen read "entering recovery" and nothing. It would just hang there.
I read that erasing the cache with fastboot might work, and it did. But when I was able to enter recovery, instead of restoring CM11, I thought, "well, maybe now it'll work", so I just rebooted. Wrong. Wouldn't boot. And, now running fastboot cache erase (or erase cache) doesn't do anything.
Now, by pressing the power button alone and holding it in I'm able to get to the fastboot, factory reset, etc screen. Went to fastboot usb, and fastboot commands work but ADB doesn't detect the device. I can't send ADB commands, but I can send ONE fastboot command. After sending any fastboot command, the phone locks up. Nothing from that point.
I tried installing a RUU. The .exe file detected the version on my phone, and everything went great until the program said it was booting to the bootloader. Locked it up. Nothing from that point.
I need help.
Thanks.
I uninstalled the HTC drivers and reinstalled them. A suggestion since ADB didn't work. And I can't get into bootloader. No difference.
Any suggestions
Any suggestions at all. I'm desperate.
Ogre77497 said:
Any suggestions at all. I'm desperate.
Click to expand...
Click to collapse
You can get into fastboot correct?
Fastboot - Yes .. Sorta
I can get into fastboot, but I copy anything to the phone via fastboot. I'm told "unable to write". Thanks.
Ogre77497 said:
I can get into fastboot, but I copy anything to the phone via fastboot. I'm told "unable to write". Thanks.
Click to expand...
Click to collapse
Ok it's probably a problem with your USB cable or USB port. Try using another PC and another cable.
If this doesn't work read some guide to properly set up ADB, uninstall all HTC stuff and install only the "naked driver" and than run the LATEST ruu. Maybe you have upgraded your firmware and can't flash older ruu's.
Sent from my HTCONE using Tapatalk
Will Try
I'll give that a try. I really appreciate the help. I run my whole business on that phone.
Just make sure you follow my suggestions properly. It should be just the cable, and I think you don't have the right drivers for ADB. Stay calm your phone is just soft bricked. You only need to be patient and read. Naked driver here http://forum.xda-developers.com/showthread.php?t=2263822
Sent from my HTCONE using Tapatalk
elvisypi said:
Ok it's probably a problem with your USB cable or USB port. Try using another PC and another cable.
If this doesn't work read some guide to properly set up ADB, uninstall all HTC stuff and install only the "naked driver" and than run the LATEST ruu. Maybe you have upgraded your firmware and can't flash older ruu's.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
+1
I did the same thing a few weeks ago and lost recovery in the process. The naked driver did the trick. Also the thread about restoring after a gsm rom install is a great. It's not a loss. Not having an sd card in the one made things a little different for me, but I was able to get everything back. These drivers suck!
Progress
I've followed your directions. I downloaded the naked driver, and the minimal ADT. I found the correct RUU (3.04.651.2) I attempted to relock the bootloader, but I got a message .. " Status read failed <no such file or directory>" Went ahead and tried flashing the RUU (fastboot flash zip ruu.zip), and got the message "FAILED Remote: not allowed"
The phone is unlocked, CID SPCS_001, and HBOOT 1.44
I wasn't able to access TWRP recovery earlier, so I tried reflashing the img file. Failed remote: image update error. I tried erasing the cache .. "Failed remote erasing error", but now I can get into TWRP.
TWRP says I have "0" internal storage. I also can't mount system, data or cache. The choices are there but can't be selected.
I can't use ADB (device not found). and the phone isn't detected by windows. I had installed the HTC drivers, but couldn't uninstall them, so I install HTC Sync manager and then uninstalled it. The program deleted the HTC drivers when I uninstalled it. When I plugged in the HTC One (with a new cable) nothing happened, so I used the windows hardware wizard to install the naked driver. The phone still isn't detected, but again I can issue fastboot commands. Well, one fastboot command and then the phone freezes up.
If I use filemanager within TWRP there's no emulated sd card. I really think that's where my problem is. No partitions are available. And, when I use TWRP to shut down, it warns me that no OS is installed.
Any other suggestions?
I sure appreciate all your help. Thanks.
elvisypi said:
Just make sure you follow my suggestions properly. It should be just the cable, and I think you don't have the right drivers for ADB. Stay calm your phone is just soft bricked. You only need to be patient and read. Naked driver here http://forum.xda-developers.com/showthread.php?t=2263822
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Try another cable maybe it's faulty. Uninstall all the HTC crap, run some cleaner app like ccleaner (maybe there are leftovers) and install only the naked driver. Your phone should be detected. Make sure you have the latest version of ADB. here's the latest http://click.xda-developers.com/api...n 1.1.3 Here&jsonp=vglnk_jsonp_13877458281136
The ruu is not to be flashed with fastboot commands, you must run the exe file
Here's the latest ruu
http://click.xda-developers.com/api....05.651 .5&jsonp=vglnk_jsonp_138775039936710
-extract zip to a folder on your pc
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-from pc, run ARUWizard.exe from the extracted folder. it will run the RUU utility & flash back to stock
Sent from my HTCONE using Tapatalk
Installing Ubuntu
Not Linux savy at all, but I'll install Ubuntu. I'll let you know when I'm able to boot into it. Thanks.
tdhite said:
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Click to expand...
Click to collapse
Ogre77497 said:
Not Linux savy at all, but I'll install Ubuntu. I'll let you know when I'm able to boot into it. Thanks.
Click to expand...
Click to collapse
When you get it installed, login and open a terminal windows (it'll install Unity by default, so click on the first button on the left sidebar and search for terminal, then click on it), then type exactly the following (cut/copy/paste should do it too) noting that the first command will make you give your password since sudo requests root level access:
sudo apt-get update -y
sudo apt-get install -y wget openjdk-7-jdk
wget http://dl.google.com/android/android-sdk_r22.3-linux.tgz
mkdir ~/bin
cd ~/bin
tar xvzf ~/android-sdk_r22.3-linux.tgz
cat >> ~/.bashrc <<EOF
if [ -d ${HOME}/bin/android-sdk-linux ]; then
PATH+=":${HOME}/bin/android-sdk-linux/tools"
PATH+=":${HOME}/bin/android-sdk-linux/platform-tools"
fi
export PATH
EOF
exit
That last command will exit the terminal. Start another and it'll read the .bashrc file and presto -- you have SDK access from everywhere.
Then, type this command:
android
That will bring up the SDK UI -- let it download/install all of the latest stuff (r22 of the tools and whatnot).
When done, close the android SDK window.
Type adb (bet it works), but fastboot will require root access (I'm not going to teach you how to get around that yet -- no problem, you just run sudo and I'll show that in a sec).
Finally, plug in your HTC One and type adb devices and let's see if it didn't just know it already.
Lemme know.
Ubuntu 12.04 LTS Installed
I have Linux running on my Dell laptop. No internet though. Something about installing broadcom drivers ..
What do I need to do, sir?
tdhite said:
Are you Linux savvy at all? All this crap is far easier on Linux. I guarantee the drivers are absolute cakewalk -- there isn't a specific driver at all, just a rule to tell the kernel about the device.
I can give you the udev rule for the phone if you are sick of trying to get Windows to work. The Android SDK is also quite easy to install.
If you want to try, just install Ubuntu 12.04 LTS. Later versions also work, but that version is the current stable release. I can help from there.
Click to expand...
Click to collapse
Ogre77497 said:
I have Linux running on my Dell laptop. No internet though. Something about installing broadcom drivers ..
What do I need to do, sir?
Click to expand...
Click to collapse
Check PM
bigdaddy619 said:
Check PM
Click to expand...
Click to collapse
@bigdaddy619 probably got you covered, but if not, let me know. Your friend for Broadcom chips on Dell boxes is here:
https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx
The gist is pretty simple. If you don't know which wireless you have, do this:
1) widen your terminal window so you have ample room (good and wide);
2) run sudo lspci -v
Hunt down the Broadcom info -- it'll say which device is your broadcom wifi. Just need the numbers.
Working ..
I feel like I'm making some progress here, but it's still not being recognized. Everything worked great up until ...
After closing the SDK window, I connected the HTC One, and "Fastboot USB" came up on my phone. I typed adb devices and got a line "List of Devices attached" by nothing was showing as being attached.
If I enter a fastboot command, it hangs saying "waiting on device".
tdhite said:
When you get it installed, login and open a terminal windows (it'll install Unity by default, so click on the first button on the left sidebar and search for terminal, then click on it), then type exactly the following (cut/copy/paste should do it too) noting that the first command will make you give your password since sudo requests root level access:
sudo apt-get update -y
sudo apt-get install -y wget openjdk-7-jdk
wget http://dl.google.com/android/android-sdk_r22.3-linux.tgz
mkdir ~/bin
cd ~/bin
tar xvzf ~/android-sdk_r22.3-linux.tgz
cat >> ~/.bashrc <<EOF
if [ -d ${HOME}/bin/android-sdk-linux ]; then
PATH+=":${HOME}/bin/android-sdk-linux/tools"
PATH+=":${HOME}/bin/android-sdk-linux/platform-tools"
fi
export PATH
EOF
exit
That last command will exit the terminal. Start another and it'll read the .bashrc file and presto -- you have SDK access from everywhere.
Then, type this command:
android
That will bring up the SDK UI -- let it download/install all of the latest stuff (r22 of the tools and whatnot).
When done, close the android SDK window.
Type adb (bet it works), but fastboot will require root access (I'm not going to teach you how to get around that yet -- no problem, you just run sudo and I'll show that in a sec).
Finally, plug in your HTC One and type adb devices and let's see if it didn't just know it already.
Lemme know.
Click to expand...
Click to collapse
Ogre77497 said:
I feel like I'm making some progress here ....
Click to expand...
Click to collapse
Hang in, writing you some instructions, just a few minutes -- just need to get a udev rule into place but I want to make it easy for you.
---------- Post added at 08:18 PM ---------- Previous post was at 07:50 PM ----------
tdhite said:
Hang in, writing you some instructions, just a few minutes -- just need to get a udev rule into place but I want to make it easy for you.
Click to expand...
Click to collapse
Actually -- let's walk before we run. I loaded up Ubuntu real quick to assure I can duplicate what I want you to see. So, do this:
1) connect (if not already connected) the HTC to the usb port so you get 'fastboot (usb)' as normal;
2) type the following:
sudo su
lsusb -v >/tmp/lsusb.txt
chmod 666 /tmp/lsbusb.txt
exit
Now, edit that file in the text editor (just search for 'edit' like you did for 'termina' and select the "Text Editor". When you get that open, have it "File | Open" the file above -- /tmp/lsusb.txt
Then look through for text similar to what I give below. If we get that -- I need the idVendor line -- it should read: "idVendor 0x0bb4 High Tech Computer Corp."
I copied some sample output from my own machine so you can see how it should look:
--------
probably a bunch of stuff we don't care about, then something like...
Bus 001 Device 005: ID 0bb4:0ff0 High Tech Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bb4 High Tech Computer Corp.
idProduct 0x0ff0
bcdDevice 1.00
iManufacturer 1 htc, Inc
iProduct 2 Android 1.0
iSerial 3 XXXXXXXXXXXX (I X'd this out -- it'll be your device serial id).
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
and a bunch more stuff...
If we don't see that, we got troubles. If we do -- we'll make a udev rule to load it up for adb and fastboot.
It appears he's bricked, when we first mounted the phone to the PC and it tried to install drivers we got QHSUSB_DLOAD which usually indicates a brick.
The strange thing was we could still access fastbootusb and the PC would recognize it being in fastboot. But any other command then fastboot devices would lock up the bootloader and fail.
Getting Closer
That's exactly it. "idVendor 0x0bb4 High Tech Computer Corp."
Finally, something worked. Thanks.
Now, edit that file in the text editor (just search for 'edit' like you did for 'termina' and select the "Text Editor". When you get that open, have it "File | Open" the file above -- /tmp/lsusb.txt
Then look through for text similar to what I give below. If we get that -- I need the idVendor line -- it should read: "idVendor 0x0bb4 High Tech Computer Corp."

Device Offline Error on HTC One

Okay, I am trying to run the firewater script in order to get S-OFF. But I have run into the "device offline" error when I try to connect my Mac to my HTC One. I understand from reading why I am getting the error, and that it is due to a new "feature" of Android 4.2.2+ which gives us secure usb debugging.
Here is the rub, though: When you connect a 4.2.2 (and above) android device to your machine (with USB debugging enabled) for the first time, you should be prompted with a confirmation message to allow or disallow USB debugging. This message will display your computers unique RSA key fingerprint and provide you a checkbox to “Always allow from this computer”. Check this box and select ‘OK’. Your device should no longer be listed as ‘offline’.
But that is not what is happening! Whatever manages the authorization questions thought that this computer was still trusted and did not ask for a new authorization. The trick, according to this thread [http://forum.xda-developers.com/member.php?u=4159439] would seem to be to remove the
adb key from the device, so as to trigger the confirmation window to allow USB debugging. But I can not find the location of this file on my HTC One, so I have no way to remove it.
Please tell me where this file is located if you know it. I have ES File Explorer installed on my rooted HTC One, Dev. Edition, running Android 4.4.2. but that path nets me an empty folder.
Thank you for any and all assistance that you provide.
SOLUTION FOUND! - See my reply below.
Okay, typed into terminal:
cd Android/HTCOneRoot
./adb-mac version (This command gives the version of ADB that the Mac is using.)
Android Debug Bridge version 1.0.29 (Terminal returns this answer; ADB needs to be at least version 10.3.1 to properly work and fix the "device offline" error.)
Here are the steps I then followed to fix problem:
1. I unplugged my HTC One from the computer.
2. Downloaded and installed Android Studio from the Android Developers’ site into my Applications folder
3 Updated my Platform Tools, as follows:
Control-clicked on the Android Studio Application and selected “Show Package Contents” from the pulldown menu.
Followed this path to the platform tools: Android Studio/sdk folder/platform-tools folder/adb & fastboot
Option copied both adb and fastboot from platform tools to my user directory ~/Android/HTCOneRoot.
Closed Android Studio
4. Restarted the computer.
5. Launched Terminal and typed cd Android/HTCOneRoot( my user directory where my adb and fastboot are stored)
6. Typed into my terminal the command, “./adb version”
Following this command prompt, Terminal responded with “Android Debug Bridge version 1.0..3.1. (Yes!!)
7. Typed into Terminal, ./adb devices
My device did not show up right away!
8. So, I unplugged my device. Shut down my Mac and restarted it.
9. Relaunched Terminal and typed cd Android/HTCOneRoot
10. Typed ./adb kill-server
11. Then typed, .adb start-server
Terminal responded with: daemon not running. starting it now on port 5037 *
daemon started successfully *
12. Plugged in device again, and the device dialog about RSA appeared. (Whew!)
13. Clicked “OK” on the dialogue box.
14. Now typed ./adb devices and my device's serial number shows up, followed by the word "device" (not "device offline")
14 All done! No more device offline errors.
Hey all,
Has anyone a guide on how to update ADB version for Windows?
I am using unrooted HTC One (UK) on v 4.3
RickCov said:
Hey all,
Has anyone a guide on how to update ADB version for Windows?
I am using unrooted HTC One (UK) on v 4.3
Click to expand...
Click to collapse
mini-sdk-1.0.31-windows.rar
download and extract to a folder of your choice, that's all.
let me also add that post the described method - ./adb devices command came up with the device and serial, but unauthorized.
With the phone connected via usb I went to Dev. Options, unchecked USB Debugging then rechecked it, instantly the confirmation dialog box came up regarding the RSA Key for my laptop. Check the box so it remembers your computer and hit save.
I was having the exact issue described by OP and simply by getting the newest version of ADB and unchecking and rechecking debugging I got the authorization. Thanks all who offered suggested and posted links to files.
and this helped as well
metropical said:
let me also add that post the described method - ./adb devices command came up with the device and serial, but unauthorized.
With the phone connected via usb I went to Dev. Options, unchecked USB Debugging then rechecked it, instantly the confirmation dialog box came up regarding the RSA Key for my laptop. Check the box so it remembers your computer and hit save.
Click to expand...
Click to collapse
http://goo.gl/WyyzhX

[noob-read] adb and fastboot. What is it? How can it help you?

Contents / Thread overview
Introduction
What is Fastboot?
What is adb?
How to install adb and fastboot
How to test adb and fastboot work
OK Gimme some useful fastboot commands please!
OK Gimme some useful adb commands please!
A little more about using Windows command prompt
Myth Busters
Introduction
adb and fastboot are very useful command line tools. They can be used from Windows, Linux or Mac to carry out tasks on your android device, such as moving and backing up files, rooting and restoring your phone to it's factory state. Understanding how to use these tools could save your phone when you get yourself in trouble. This is especially true of rooted users. Particularly those of you who are "new to the scene". You definitely should read and understand this thread before you do ANYTHING root related.
This thread is not intended to be a non-exhausted reference. It is merely here to give an overview of the most basic of basics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is fastboot?
Fastboot comprises of 2 components.
1) Fastboot mode on the phone (The Bootloader)
2) Fastboot tool on your computer
Fastboot is a small command line tool that you can use from your computer whilst the phone is connected via USB and you are booted into the bootloader. The most common uses for fastboot are:
Unlocking the bootloader - needed as part of the rooting process
Flashing a custom recovery to the device - needed as part of the rooting process
Flashing factory images - used for saving / trestoring your device back to stock
Being able to do these 3 things are essential before rooting. Many new users skip learning these and use a toolkit to root. As a result, when they mess up and we try to explain what they need to do to fix their issues, it becomes very difficult for us to help as fastboot is not understood. It is YOUR responsibility to understand these things BEFORE you mess up.
What is adb?
adb is another small command line tool that stands for "Android Debugging Bridge". Again, it can be used from a computer connected via USB to your android device. It can be used whilst the device is booted into Android or (if you have a custom recovery), it can be used in recovery too, unlike fastboot (yes, adb and fastboot are NOT the same thing) which can only be used in the bootloader.
adb can be used to push files to (or pull files from) your phone. It can also be used to execute many of the commands available in Linux terminals (Or Android terminal emulators) on the device itself. We're not here to cover all these commands however. We just want to cover the basics.
How to install adb and fastboot
adb and fastboot are very easy to install and can be installed on Windows, Linux and MAC computers. The Windows install can be a little bit more complicated than the other 2 and may need additional drivers installing too.
Windows.
There is a very handy tool that can install adb and fastboot in 15 seconds. It is recommended that you use this to install adb and fastboot. Please see the link immediately below for that tool:
ADB, Fastboot and Drivers - 15 seconds ADB Installer - Really quick and easy way to install adb and fastboot (by @Snoop05). Downlkoad links are at the bottom of post 1.
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide (to which again, you should answer Y)... This then allows you to type adb commands in the command prompt without having to open a particular directory first. You may or may not understand what I mean when I say that, but take it from me, its much more convenient and easier to use this way.
There is actually a manual way of doing what the 15 second installer is doing, by extracting the adb.exe and fastboot.exe to your computer and using the Windows Enviroment variable PATH to make the executables work system wide, however the installer is much quicker, but for reference:
Code:
right-click computer > properties > advanced > environment variables.
under system variables click "path" and click "edit"
at the end of the line, add the below:
;c:\adb_fastboot
where c:\adb_fastboot is where you decided to extract adb and fastboot executables.
Please note, the semi-colon ; is VERY important.
You can do this if for some reason the installer becomes unavailable
It will also ask if you want to install device drivers. Actually, say N to this as we're going to cover that next, using the Universal Naked driver which has better compatibility.
Here is a link to the naked driver: DOWNLOAD THIS which has been taken from this thread:
[ADB/FB/APX Driver] Universal Naked Driver
Some of the below instructions are taken from the thread above by @1wayjonny but I have moved them here to make it easier for you guys.
Code:
To install on Windows 7:
- Ensure existing drivers are uninstalled first*
- Extract the zip to c:\adb (created earlier by the installer)
- Right-click "Computer" > Manage in windows and choose "Device Manager"
- Boot the Nexus 5 to the bootloader (Volume down + Power) and connect the USB Cable
- Watch for any new devices with exclamation marks appearing
- Right-Click the new device > Update driver software
- Choose the "browse" method and browse to c:\adb then follow the wizard to the end.
*To uninstall existing drivers, boot into Android and connect the USB cable. Monitor device manager for the device showing up. To uninstall the device, right-click it to uninstall it. At the prompt, ensure you also choose to delete the driver. Repeat this for bootloader and recovery.
Code:
To Install on Windows 8, you must additionally disable driver enforcement
- From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the - -- pop-out bar to appear, then click the Gear icon).
- Click ‘More PC Settings’.
- Click ‘General’.
- Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
- Wait a bit.
- Click ‘Troubleshoot’.
- Click ‘Advanced Options’
- Click ‘Windows Startup Settings’
- Click Restart.
Once that is done, your Windows computer is configured for adb and fastboot.
In device manager, the device should show up as below, depending whether you are booted into recovery or bootloader...
Recovery - Android Device > Google Nexus 4 ADB Interface
Bootloader - Android Device > Google Nexus 4 Bootloader Interface
If it shows as something different, either you have existing drivers in the way or something went wrong.
Linux and Mac
Here is a really simple tool to install adb and fastboot on the above OS. The only expectation is you know how to open and run a terminal command. Please see the link immediately below:
Nexus Tools 2.2 (Featured by XDA) - adb and fastboot installer for Linux and Mac (by @corbin052198)
Once you have installed adb and fastboot from the above link, you're ready to go.
How to test adb and fastboot work
As previously mentioned, adb and fastboot are both command line tools. That means you must run these tools from command prompt (cmd in Windows) or Terminal (Linux and Mac).
Remember earlier, I mentioned that fastboot can only be used in bootloader? and adb can only be used in Android (or custom recovery - lets cover that later)? We can use the command "fastboot devices" and "adb devices to see if we have adb and fastboot working correctly.
Lets try it.
Boot your phone into android
Connect it to your computer via USB
Open cmd (start > type "cmd" on Windows) or Terminal (Mac/ Linux
Type in the windows "adb devices" and press enter
Here is what we don't want to see:
Notice how there is nothing underneath where it says "List of attached devices" That means it cannot see any device
Here is what we DO want to see:
We can see that there is now a device listed.
OK lets test fastboot. Unplug the USB and turn off the phone. When it is off, hold down Volume down + power until you feel the vibrate. You will now be in the bootloader. Reconnect the USB cable.
In the same window (cmd or terminal) we're going to now type "fastboot devices".
Again, here is an example of what we don't and do want to see:
If in both modes, you can see your devices "Serial Number", then you know they are both working. If they're not working (mainly Windows users) you may want to check this additional thread about troubleshooting drivers.
[*] Diagnosing USB Driver and ADB issues in Windows - Ensure ADB and fastboot WORK before you root (by @MaxRabbit)
Please note that if you cannot get adb and fastboot to work "system wide", you can open the command prompt to the location of the adb and fastboot executables exist and try from there.
OK Gimme some useful fastboot commands please!
Here are some of the most useful fastboot commands you will come across. Fastboot is used mostly for flashing images to the devices partitions on the internal memory.
Code:
fastboot oem unlock
This unlocks your bootloader and allows you to flash a recovery to root. WARNING, this will wipe your device. If you actually want to do this, please follow this guide:
How to Unlock Bootloader, Install Custom Recovery and Root - The preferred method. Allows you to learn and understand the basics (by @Chromium)
Code:
fastboot flash recovery recovery.img
This will flash a recovery.img to the recovery partition. The command is broken down into "fastboot flash" (what to do) "recovery" (where to flash to) "recovery.img" what to flash there. In the terminal or command prompt, you cannot just type "recovery.img" though. It has to be the path to where the recovery image is. For example, if my recovery image is on my desktop, I would have to type:
Code:
fastboot flash recovery c:\users\rootsu\desktop\recovery.img
It is worth noting, that it IS case sensitive, meaning if your file is called Recovery.img, you must type the capital R...
Other things you would flash:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
These will flash the system image (ROM) and bot image (kernel) as you would if you were returning to stock. If you want to return to stock, please use this guide:
How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5 - Understand how to undo whatever you do before you root (by @abaaaabbbb63)
You can also boot into a recovery.img without flashing it...
Code:
fastboot boot c:\users\rootsu\desktop\recovery.img
which is "fastboot boot" (what to do) "c:\users\rootsu\desktop\recovery.img" what to do it with. As you may have noticed, we did not define the recovery partition in this command, that's because we're not flashing it....
OK Gimme some useful adb commands please!
At the moment, we are going to assume you have a custom recovery and you have booted into recovery. The reason for this is using adb in recovery can be much simpler.
Here are some useful scenarios for using adb.
Backup your sdcard to your PC
Code:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
**Please note, some recoveries may "mount data" automatically on boot, so don't be disheartened if you get an error stating device or resource busy. This probably just means you can't mount what is already mounted**
/data/media/0 is the real location of /sdcard for your information. Also referred to as "The mount point". What we have done here is "adb pull" (what to do) "data/media/0" (what to move) "c:\MyBackup" (where to move it to)
Push a zip file from your PC to your sdcard (useful if you wiped your sdcard and rom)
Code:
adb shell
mount data
exit
adb push c:\rom.zip data/media/0
What we have done here is "adb push" (what to do) "c:\rom.zip" (what to move) "data/media/0" (where to move it to)
You can of course also use adb to push and pull files to and from /system too. You just need to:
Code:
adb shell
mount system
exit
I mentioned earlier that using custom recovery is much easier for adb than whilst booted into Android. You need to ensure you have a kernel that allows insecure adb before you do anything with system and data partitions. You also need to ensure that USB debugging has been enabled in developer options.
For example, to mount system to pull files whilst android is running you have to:
Code:
adb root
adb shell
mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system
...which is clearly a little bit more involved, so I recommend you use recovery for adb push and pull. You can find more detailed information on adb here: http://developer.android.com/tools/help/adb.html
A little more about using Windows command prompt
One thing to understand is that like Windows, command prompt (cmd.exe) works with directories (or folders if you like). The Linux and Mac terminals are the same, but most linux users, we expect you would already know this.
Here you will see I have downloaded a recovery image that I want to flash using fastboot.
As you can see, the recovery.img is located in C:\users\rootSU\Desktop
Usually when you open the command prompt from the start menu, or run command, the command prompt will default to your user location as seen below:
So lets try and fastboot flash recovery recovery.img...
It fails with a not-too-accurate error message. It has failed because you have not told it where the recovery image is. It assumes it is in the directory as listed in the prompt
So, how do we deal with this? Well, there are 3 ways.
1) We tell the command prompt where the recovery.img actully is in the command itself
Success! As you can see, we have told the command that the location for the file is Desktop\recovery.img
2) We can change the directory in command prompt to the directory where the file is. In this example, we change directory to "Desktop". The change directory command is "cd " or in this case "cd Desktop"
3) ...and possibly the simplest method. We hold shift whilst we right-click on the folder we want to change directory to, and directly open a command prompt there:
Another point to make with command prompt or terminals, is if you do a particular command, it is "pre-programmed" to "expect" a particular format of that command.
For example, we know that adb push as a command expects after it . This means the command is actually
Code:
adb push
BUT if you put something AFTER , for example -
Code:
adb push somethingelse
, it will assume that the "somethingelse" is a bad parameter, and the command will fail. It will probably display (or "print" which is the technical term in a terminal) a helpful guide of how the command should be used instead of trying to run the command which it does not understand.
You're probably wondering why I am telling you this. Well quite simply, it is a warning about folder names. Imagine you have c:\users\rootSU\My Documents as a folder. You assume the command is then
Code:
adb pull /data/media/0 c:\users\rootSU\My Documents
but it is not... There is a space in between My and Documents. What you have actually done is
Code:
adb pull Documents
because it uses a space to signify the end of a command or parameter. It is best to avoid using folders with spaces in them. Avoid as much as you can. In the event it is unavoidable (Although when is it ever>) then please surround the path with quotation marks,
Code:
adb pull /data/media/0 "c:\users\rootSU\My Documents"
so that way, it sees everything between the " " as a single parameter.
Myth Busters
Myth 1: You need USB debugging on to use adb and fastboot
If you cannot boot into Android, it doesn't matter. You DO NOT need USB Debugging turned on to use adb outside of android. USB Debugging is an Android ONLY setting. Fastboot obviously also does not need debugging either as this too is outside of Android
Myth 2: to adb push or fastboot flash files, they must be in the same folder as adb or fastboot executables. Sorry but this is rubbish. You can pass the full path of the image you're flashing or file you're pushing in the command and fastboot / adb can be called system wide if you've set them as an environment variable or used the 15 second installer
This should absolutely be a sticky!!
Sent from my EVO using XDA Premium 4 mobile app
Evolution_Freak said:
This should absolutely be a sticky!!
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. I created it specifically to put in the general sticky in my signature. Section 1a and 4
Great work @rootSU definitely should be sticky!
psycho693 said:
Great work @rootSU definitely should be sticky!
Click to expand...
Click to collapse
Thanks. Its in there. All in the main sticky thread
Sent from my Nexus 5 using Tapatalk
rootSU said:
Thanks. Its in there. All in the main sticky thread
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It helps a lot because I have been looking for a good guide to pull system files while the phone is running
psycho693 said:
It helps a lot because I have been looking for a good guide to pull system files while the phone is running
Click to expand...
Click to collapse
Cool
The main thing for me was we had a diagnosis thread and we had a full guide for rooting or returning to stock but nothing to answer the how to set up or how to adb push basic questions... I've seen several threads today alone
Sent from my Nexus 5 using Tapatalk
Very cool, didn't actually know the push/pull commands or that driver you reference
wonderful(really wonderful)!
but i cant find the start button on this toolkit.. :silly:
simms22 said:
wonderful(really wonderful)!
but i cant find the start button on this toolkit.. :silly:
Click to expand...
Click to collapse
LMAO! rootSU, this is freakin awesome. Every thread that I find complaining about issues with toolkits will be redirected here. If this isn't stickied it should be a crime.
Sent from my Nexus 5 using xda premium
I suggested to the mods that we have just one sticky in general that has all the threads we believe to be Stickies within it. That way we can control it ourselves but without making it messy, so we have that now ( see signature).
Sent from my Nexus 5 using Tapatalk
Thanks for listing my Nexus Tools
corbin052198 said:
Thanks for listing my Nexus Tools
Click to expand...
Click to collapse
Thanks for making them
Sent from my Nexus 5 using Tapatalk
simms22 said:
wonderful(really wonderful)!
but i cant find the start button on this toolkit.. :silly:
Click to expand...
Click to collapse
How do I flash the toolkit? I think its bricked :silly:
Good thread.
Amazingly detailed thread. There's no way to mess up reading this thread, the noobs will definitely learn if they can do the reading first that is.
I will laugh when a noob asks, "fastboot? It takes about a minute for me to boot!"
Sent from my Nexus 5 using XDA Premium 4 mobile app
I'm not sure what this all is, but awesome guide!!!!
? I'll be frequently linking this too.
Good job my friend, i am sure it's really helpful for a lot of people
Tapatalk Team SlimRoms
Added the below section about using command prompt. Hopefully a little more detail should help.
A little more about using Windows command prompt
One thing to understand is that like Windows, command prompt (cmd.exe) works with directories (or folders if you like). The Linux and Mac terminals are the same, but most linux users, we expect you would already know this.
Here you will see I have downloaded a recovery image that I want to flash using fastboot.
As you can see, the recovery.img is located in C:\users\rootSU\Desktop
Usually when you open the command prompt from the start menu, or run command, the command prompt will default to your user location as seen below:
So lets try and fastboot flash recovery recovery.img...
It fails with a not-too-accurate error message. It has failed because you have not told it where the recovery image is. It assumes it is in the directory as listed in the prompt
So, how do we deal with this? Well, there are 3 ways.
1) We tell the command prompt where the recovery.img actully is in the command itself
Success! As you can see, we have told the command that the location for the file is Desktop\recovery.img
2) We can change the directory in command prompt to the directory where the file is. In this example, we change directory to "Desktop". The change directory command is "cd <directory>" or in this case "cd Desktop"
3) ...and possibly the simplest method. We hold shift whilst we right-click on the folder we want to change directory to, and directly open a command prompt there:
Click to expand...
Click to collapse
Added a bit more about using directory paths with spaces.
Sent from my Nexus 5 using Tapatalk
After a week with my new nexus, it's time for a litlle fun... But first must say thank you for this explanation.
Sent from my Nexus 5 using Tapatalk 2

unknown device in device manager

Hi
I have HTC one that couldn't be recognized by my pc
running under windows 7 by usb
I have : VId = 0000 and pid = 0000 in : le chemin d'acces à l'instance du périphérique :
USB\VID_0000&PID_0000\6&189D988F&0&4
knowing that I have installed the last version of HTC Sync manager,
usb debogging is enabled in my htc ,
sorry for my poor english
thank you for your help
hm911 said:
Hi
I have HTC one that couldn't be recognized by my pc
running under windows 7 by usb
I have : VId = 0000 and pid = 0000 in : le chemin d'acces à l'instance du périphérique :
USB\VID_0000&PID_0000\6&189D988F&0&4
knowing that I have installed the last version of HTC Sync manager,
usb debogging is enabled in my htc ,
sorry for my poor english
thank you for your help
Click to expand...
Click to collapse
Take a look at FAQ Q#2 on getting your phone recognized.
majmoz said:
Take a look at FAQ Q#2 on getting your phone recognized.
Click to expand...
Click to collapse
Hi @majmoz
steel not finding my problem in this FAQ
hm911 said:
Hi @majmoz
steel not finding my problem in this FAQ
Click to expand...
Click to collapse
Did you follow the steps in FAQ Question #2? Can you use a different port, cable or computer? Depending on what you want to accomplish, you could use Linux on a USB!
HOW TO USE LINUX FOR FASTBOOT & ADB VIA USB
This guide originally posted by @Danny201281
http://forum.xda-developers.com/showpost.php?p=54272479&postcount=219​Linux is your friend; if your drivers are not working the chances of getting them working again without the phone booting are slim. But Linux doesn't need drivers to talk to your device.
Go here: http://www.pendrivelinux.com/ and download Universal USB Installer – Easy as 1 2 3
Then go here: http://releases.ubuntu.com/12.04/ and download Ubuntu from the first link at the top that says PC (Intel x86) desktop CD
Then use these files to create a bootable Linux USB drive with at least a 2 GB persistent file for storing files. You'll also probably need to change your boot settings in the computers bios to boot from USB.
MOVING YOUR FILES TO UBUNTU
Once booted you should be at a screen with options to "Try Ubuntu” or "Install Ubuntu". We don’t need to Install anything so just choose "Try Ubuntu" and the computer will boot to the Ubuntu Desktop (If you get a popup saying "system has encountered an error" or something similar just cancel and ignore it, it should have no effect on what we need to do as it is due to missing Linux OS updates we don’t need). On the left of the screen you'll see the Dock. Open the orange folder icon near the top this is the Home folder. It’s where we need to put any files we need to work with such as a rom.zip you want to push to the device or recovery.img files for flashing.
To get your files here is a simple drag and drop process. In the top left of the Home folder you'll see the drive structure of you pc under devices. Choose your PCs hard drive and Right-Click then" Open in a new window". Locate your .zip or .img files and drag them into the home folder. Now wait for the copy process to complete and rename them for easier typing later, e.g., rom.zip, firmware.zip or recovery.img etc.
USING ADB AND FASTBOOT
First you need to install adb fastboot; this is easy just 3 commands in the terminal. Thanks to Webupd8 team.
Code:
sudo add-apt-repository ppa:nilarimogard/webupd8
Code:
sudo apt-get update
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
Make sure your connected to the internet and press Ctrl+Alt+T to open the terminal then type or copy and paste the above commands one at a time waiting for each to complete their output. It may seem to have stopped at times but be patient when the prompt returns to normal enter the next command and when there all done you’re ready to use adb and fastboot.
Once you've moved all the files you need to the home folder that’s it you’re ready to go. Close everything down on the desktop (optional) and press Ctrl+Alt+T this will open the terminal now connect your phone with the USB cable. All fastboot commands need to have the "sudo" prefix added at the start, e.g.
fastboot flash recovery recovery.img becomes sudo fastboot flash recovery recovery.img
fastboot devices becomes sudo fastboot devices
However, adb should work basically the same as on windows. If you do have problems with normal adb commands adding “sudo” can help here as well.
Click to expand...
Click to collapse

Categories

Resources