Today I attempted to flash CleanRom 1.5 OE2 for my galaxy s6 edge. On the cleanrom page it clearly states that your device must have the OE2 base or it will not work. As I am an idiot I overlooked this and flashed the rom on an earlier base. After this my phone gave me a message saying that my sim card (which was working before the flash) was not a verizon card and that it would not work. With some online research the fix appeared easy, unroot and restore to a stock firmware with odin. However when I attempt this I receive the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920VVRU1AOE2_G920VVZW1AOE2_G920VVRU1AOE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After researching this error, and not being able to find a definitive answer, it appears that the only fix is to flash a .pit file to my device (this is after trying multiple cables, multiple usb 2.0 and 3.0 ports, and multiple computers). However, there are no tutorials on how to flash a .pit file with the latest version of odin and there are many warnings that it may brick the device more. If anyone has information on how to fix the NAND Write Start!! FAIL! error it is much appreciated or how to actually flash the .pit file with the stock firmware.
I am attempting to flash the stock OE2 firmware for the verizon Galaxy s6 edge downloaded from
http://www.sammobile.com/firmwares/
I have located a verizon .pit file from this thread
http://forum.xda-developers.com/galaxy-s6-edge/general/g925-pit-files-multi-thread-download-t3171636
Any help is much appreciated as I have no working phone at the moment. Thanks.
Related
Hey all,
I am trying to go back to stock. I am using Odin 3.09, and I have the correct file. (G900AU1ANCE) I am running Odin under administrator mode. Every time I run it, I get this same message. You all know much more than I when it comes to this stuff, so hopefully you guys can help me out. Verizon has a sale going on and I wanna get the LG G3, and they'll give me $$$ for the S5. But it has to be stock, or they won't take it.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the rom that is in there now is Visix 3.0.
what is my next move?
thanks in advance.
ok - I went to this: http://forum.xda-developers.com/showthread.php?t=2785185 - and tried what shortydoggg said. I tried loading the BL file too, but it failed right away. Same error as before. Now, I'm trying it without that file, and use the other 3 files. Its seems to be working and not giving any error's. I'll update this to see if it works or not.
Update:
It worked. Everything is back to normal!
hammer826 said:
Hey all,
I am trying to go back to stock. I am using Odin 3.09, and I have the correct file. (G900AU1ANCE) I am running Odin under administrator mode. Every time I run it, I get this same message. You all know much more than I when it comes to this stuff, so hopefully you guys can help me out. Verizon has a sale going on and I wanna get the LG G3, and they'll give me $$$ for the S5. But it has to be stock, or they won't take it.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the rom that is in there now is Visix 3.0.
what is my next move?
thanks in advance.
ok - I went to this: http://forum.xda-developers.com/showthread.php?t=2785185 - and tried what shortydoggg said. I tried loading the BL file too, but it failed right away. Same error as before. Now, I'm trying it without that file, and use the other 3 files. Its seems to be working and not giving any error's. I'll update this to see if it works or not.
Update:
It worked. Everything is back to normal!
Click to expand...
Click to collapse
Where did you find the Odin file? Will be needing it for lollipop when it release Lol. Well not too sure if the phone will update while rooted
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me
wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone
You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.
@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.
I was having issues with the WiFi on my phone so I made backups to the SD card, removed it and did a factory reset on the phone. I'm not sure what it was running at the time, but not lolipop. It now boots to AT&T logo and heats up until I pull the battery out (I've waited upwards of 30 mins). I tried flashing stock and 0F3 roms with odin and I get the error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone it says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
I've tried flashing with PIT, tried flashing the boot loader, G870AUCU1ANE4_Full_Odin, and G870A_OC5_Bootloader, to no avail. I also downloaded Samsung Kies 3 and tried to do Firmware upgrade and initialization, which also didn't work. It comes up to Firmeware emergency recovery and asks for a recovery code (which I don't have). I've also tried from recovery mode to factory data reset and also tried to flash the roms from external SD. Is there anything else I can try or something I am missing that can get this working? Any help would be greatly appreciated.
Im trying to install stock firmware on my note 5 and it keeps failing. Yes i do have the correct firware for my model and carrier. Hope some1 can help me out
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
jdq1412 said:
Im trying to install stock firmware on my note 5 and it keeps failing. Yes i do have the correct firware for my model and carrier. Hope some1 can help me out
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Who is your carrier and which firmware are you trying to use? Are you trying to downgrade/Update or something? Has the phone ever been rooted? Did you enable oem unlock in developer settings? It's kind of hard to just guess or help you with the information you've given us.
T-mobile and im trying to use stock note 5 firmware. Yes i was rooted and with a custom rom. Im trying to unroot the phone and put it back to stock but now it wont get past samsung note 5 logo and im still getting the fail from odin when trying to install the firmware.
jdq1412 said:
T-mobile and im trying to use stock note 5 firmware. Yes i was rooted and with a custom rom. Im trying to unroot the phone and put it back to stock but now it wont get past samsung note 5 logo and im still getting the fail from odin when trying to install the firmware.
Click to expand...
Click to collapse
That's because you rooted the phone and it tripped your Knox counter so the only way to fix this is to reinstall TWRP and then flash the rom again and after it's working go into SU and select remove root or whatever and then you'll need to extract the firmware you downloaded from T-Mobile and you'll need to put the files in the correct spot in Odin so they flash one at a time I.E. Boot, CM, RECOVERY etc etc... You should also try unzipping the firmware and then delete only cache.img and then repack/rezip it and try flashing it like that before trying all the other stuff.
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
yadu123 said:
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
Click to expand...
Click to collapse
Sorry Brother, You can't downgrade using Odin. Because Samsung blocks marshmallow bootloader when you are on Nougat Bootloader. YOU CAN ONLY UPGRADE using Odin. YOU CAN'T DOWNGRADE USING ODIN.
You can't go to Marshmallow stock from Nougat Stock using ODIN. I think u understood the concept. Try flashing a Nougat Firmware. You will not get any error. If u want marshmallow again, then u have to go for CUSTOM ROMs.
Hope this Helped u. Pressing Thanks Button proves that.??
Few months back I have upgraded to nougat and downgraded back to marshmallow without any problem.I was trying something new on my phone that tìme and it just bricked on me . So I flashed a nougat firmware and was using without root for sometime and it doesn't work for me much. Now I have flashed nougat firmware and phone is working and I want marshmallow. In S6 forum I saw someone had same problem and some pit file solved it and I have no idea what they have done.
yadu123 said:
Hey devs,
I'm using a5-2016 (sm-a510fd) with nougat. Today I've tried to downgrade to marshmallow because many Xposed modules I was using isn't working in nougat firmware. But one error which is troubling me a lot and I haven't encountered something like this for a while.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After this i've installed TWRP recovery and wiped system+data+cache+dalvik+internal , formatted data too but bad luck i keep on getting this error and my mobile is just dead for now. i've tried different usb ports and different usb cables repeating same process all over again. Same process all over and no luck so far. I require a lot of modules and customizations to survive because i'm legally blind and only Xposed help me make my life easier with my mobile. Waiting for help.
Click to expand...
Click to collapse
yadu123 said:
Few months back I have upgraded to nougat and downgraded back to marshmallow without any problem.I was trying something new on my phone that tìme and it just bricked on me . So I flashed a nougat firmware and was using without root for sometime and it doesn't work for me much. Now I have flashed nougat firmware and phone is working and I want marshmallow. In S6 forum I saw someone had same problem and some pit file solved it and I have no idea what they have done.
Click to expand...
Click to collapse
it wont work anymore bro. Just understand. If u want marshmallow... make system dumb using assayed kitchen amd flash.