Database Develop

Droid 4 SystemUi

Because I over wrote the Default systemui, to get a sweeter looking battery icon. I can not do the over the air update that VZ is Pushing. Need help, either I need a uncompressed default systemui.apk or ideas on how to install the update.

Here you go!

rumgool said:
Here you go!
Click to expand...
Click to collapse
First Thanks that was quick! Second if I read correctly, I should just be able to install and reboot correct? then goes back to the battery or do I over write?

Just copy the file to your sd card, then move it to your /system/app folder. Once it is there, check the permissions by long tapping and going to permissions. The permissions for this file should be :
Owner - rw
Group - r
Others - r
I am pretty sure this should do it, obviously reboot after all of this, not sure if you need to wipe anything, but I don't see why you would.
PS I am using root browser, so depending on your file manager, adjust accordingly

Im sorry I need the default framework-res.apk also

Attached

IT worked but I had to fix the checksum on the file I replaced, but thanks to all.

Good stuff, I'm glad it worked

[Q] ViPER4Android and ROMcleaner folder how to delete

Why is it i cannot delete those 2 folders in any explorer in my internal? It it something to do in permision or something else? Need you help here tia

Which error you have from the explorer?
However, if you will erase all your sd, do a full wipe when you're flashing a new rom

mcrenz said:
Why is it i cannot delete those 2 folders in any explorer in my internal? It it something to do in permision or something else? Need you help here tia
Click to expand...
Click to collapse
Same problem here. Just managed to delete them entering in recovery TWRP (I have) and advanced file manager select and delete the Viper4android folder. Hope will help others.

skisofast said:
Same problem here. Just managed to delete them entering in recovery TWRP (I have) and advanced file manager select and delete the Viper4android folder. Hope will help others.
Click to expand...
Click to collapse
Good. You could also have deleted them by using a root explorer and looking for them in /data/media/0 instead of /sdcard.

fenstre said:
Good. You could also have deleted them by using a root explorer and looking for them in /data/media/0 instead of /sdcard.
Click to expand...
Click to collapse
skisofast said:
Same problem here. Just managed to delete them entering in recovery TWRP (I have) and advanced file manager select and delete the Viper4android folder. Hope will help others.
Click to expand...
Click to collapse
thank you guys! very bighelp

[Q] No Settings in menu

hey i just updated my Galaxy Advanced to this http://forum.xda-developers.com/showthread.php?t=2578599
i installed xposed,rebooted my phone and when the phone loaded i havnt found the settings in my menu.
i tried to go into the settings from the notification bar and it nothing happened when i clicked it.
i dont have a settings.apk in the rom zip file.
thanks for the help..

br4infreze said:
hey i just updated my Galaxy Advanced to this http://forum.xda-developers.com/showthread.php?t=2578599
i installed xposed,rebooted my phone and when the phone loaded i havnt found the settings in my menu.
i tried to go into the settings from the notification bar and it nothing happened when i clicked it.
i dont have a settings.apk in the rom zip file.
thanks for the help..
Click to expand...
Click to collapse
Get it from ROMs zip, and push it to system/app.

shut_down said:
Get it from ROMs zip, and push it to system/app.
Click to expand...
Click to collapse
as i wrote i looked inside the rom zip,there is no settings.apk or any system apks inside the zip

br4infreze said:
as i wrote i looked inside the rom zip,there is no settings.apk or any system apks inside the zip
Click to expand...
Click to collapse
What is the size of zip that you downloaded? It should be 205MB. Maybe your download is corrupted.
In zip - settings.apk is in "priv-app" folder, not in system/app.

shut_down said:
What is the size of zip that you downloaded? It should be 205MB. Maybe your download is corrupted.
In zip - settings.apk is in "priv-app" folder, not in system/app.
Click to expand...
Click to collapse
If zip was corrupted, then he can't flash, or flashing give an error, right?

R_a_z_v_a_n said:
If zip was corrupted, then he can't flash, or flashing give an error, right?
Click to expand...
Click to collapse
I think it could happen that it could be flashed... I am not 100% sure. Anyway, I did not remember that someone had that problem.

Did you edit zip ?

lol never mind guys.
i gave up and reinstalled the ROM.
i got everything working as i needed,thanks to everyone who helped
but a new problem is how to get rid of this three dot menu
its anoyying

[MOD][Z2] MM 575 Deodex Patch

Hello guys
Today i will be Sharing Deodex Patch for Official Android 6.0.1 (.575 build).
This ZIP Contains Deodex and Zipalign Patch For Stock Rom with Build no 23.5.A.0.575. .
REQUIREMENTS
Prerooted Stock MM Build no .575 With Recovery
INSTALL INSTRUCTIONS
Wipe cache and dalvik cache.
Flash Deodex ZIP followed by Fix zip in Recovery.
Reboot.
DOWNLOADS
Link: http://www.mediafire.com/download/lns07bainl8iaac/Deodex_Patch_575.zip
Fix: https://drive.google.com/file/d/0B_ACsHR2ThfsU1dTd0dpLUhJdWM/view?usp=drivesdk
CREDITS
@lord-ralf-adolf For His Awesome Lordroid One Batch Deodexer
@jitz975 and @Rajeev for Helping.

Thank you.
it isn't delete odex files in system/app, priv-app and framwork automatically but I delete them manually, work fine

Thanks brother! I will try and report...

yakuzainlove said:
Thank you.
it isn't delete odex files in system/app, priv-app and framwork automatically but I delete them manually, work fine
Click to expand...
Click to collapse
For me it worked bro, Yesterday i kept few odex files in system/app.... arm folder nd ran the delete.sh using terminal and the odex files got deleted so script was working.

Nice Hey man , this is like slim 570 deodexed but with bloat?

dex87xda said:
Nice Hey man , this is like slim 570 deodexed but with bloat?
Click to expand...
Click to collapse
Ur wlcm.
Its just a deodex patch which is to be flashed after flashing prerooted rom to deodex the system.

Nice

Hey how do i confirm that my System is deodexed after flashing this or not ?

chawlasrijan said:
Hey how do i confirm that my System is deodexed after flashing this or not ?
Click to expand...
Click to collapse
Just delete sqsh files from system and see if u can boot to system

dex87xda said:
Just delete sqsh files from system and see if u can boot to system
Click to expand...
Click to collapse
Umm, i cannot locate sqsh files anywhere in the systen !!
Can you pinpoint the exact location.

chawlasrijan said:
Hey how do i confirm that my System is deodexed after flashing this or not ?
Click to expand...
Click to collapse
Check for odex files in system/app or priv-app or framework. If they are not there then ur system is deodexed.

vikash1994b said:
Check for odex files in system/app or priv-app or framework. If they are not there then ur system is deodexed.
Click to expand...
Click to collapse
There are !!
So basically flashing this didn't help.
How do i proceed now ?

chawlasrijan said:
Umm, i cannot locate sqsh files anywhere in the systen !!
Can you pinpoint the exact location.
Click to expand...
Click to collapse
Sqhs files are present in root of ur system but since u have flashed the deodexed patch sqsh and other odex files r deleted thats why ur not able to locate

vikash1994b said:
Sqhs files are present in root of ur system but since u have flashed the deodexed patch sqsh and other odex files r deleted thats why ur not able to locate
Click to expand...
Click to collapse
Okay, but then i still have odex files present

chawlasrijan said:
Okay, but then i still have odex files present
Click to expand...
Click to collapse
Wait iwl tell how u can delete them manually.

your fw is deodexed

chawlasrijan said:
Okay, but then i still have odex files present
Click to expand...
Click to collapse
Do one thing extact delete.sh from zip nd run it via terminal emulator

vikash1994b said:
Do one thing extact delete.sh from zip nd run it via terminal emulator
Click to expand...
Click to collapse
Okay, extracted !
Now what command do I write in Terminal emulator.
Sorry I'm new to all this

chawlasrijan said:
Okay, extracted !
Now what command do I write in Terminal emulator.
Sorry I'm new to all this
Click to expand...
Click to collapse
No problem bro
First move delete.sh to sdcard Download terminal emulator from playstore then open it nd write following commands
Su
Sh sdcard/delete.sh
U may get some error ignore them and then check for odex files

vikash1994b said:
No problem bro
First move delete.sh to sdcard Download terminal emulator from playstore then open it nd write following commands
Su
Sh sdcard/delete.sh
U may get some error ignore them and then check for odex files
Click to expand...
Click to collapse
Okay, so i figured what i had to do, but using mine & your commands as well, I'm getting this same error
& odex files are still present

Question Build.prop

I am rooted with Busybox installed via magisk. SU root check was done and i am rooted for sure. However i cannot seem to modify the build.prop file. Can anyone advice please

Install Solid Explorer and try again edit with this file explorer

Trevorek said:
Install Solid Explorer and try again edit with this file explorer
Click to expand...
Click to collapse
Good looking app however it can not copy the cache to the system/build.prop.
In other words, it can not save changes like everything else

FKX1997 said:
Good looking app however it can not copy the cache to the system/build.prop.
In other words, it can not save changes like everything else
Click to expand...
Click to collapse
i had this problem with new version of magisk (23 beta+)
now i use older version ,everything work fine (full control on system files)
(i use mixplorer)

loopypalm said:
i had this problem with new version of magisk (23 beta+)
now i use older version ,everything work fine (full control on system files)
(i use mixplorer)
Click to expand...
Click to collapse
Which version are you using please

Update, checked my root and it is all working as it should be, yet i can not write to system. I have access to ADB but i need to add "ro.debuggable=1" to build.prop to do more work on the phone

FKX1997 said:
Which version are you using please
Click to expand...
Click to collapse
right now i use 21.1

loopypalm said:
right now i use 21.1
Click to expand...
Click to collapse
Just add the prop edit to a magisk flashable zip
In magisk flashable zip empty go to common/system.prop edit with text editor and add the prop you want to change then flash zip

toolhas4degrees said:
Just add the prop edit to a magisk flashable zip
In magisk flashable zip empty go to common/system.prop edit with text editor and add the prop you want to change then flash zip
Click to expand...
Click to collapse
Too many things to just edit a prop ...
plus the prop was not the only problem i got, i could not write to some folders in system
i think he fixed the problem in 24 ,but i'll keep using 21.1 anyway ...

loopypalm said:
Too many things to just edit a prop ...
plus the prop was not the only problem i got, i could not write to some folders in system
i think he fixed the problem in 24 ,but i'll keep using 21.1 anyway ...
Click to expand...
Click to collapse
Really it's not to many things it literally takes 20 seconds. I know the issue. And the dynamic part one are mainly it. That's why I suggested what I told you.

toolhas4degrees said:
Really it's not to many things it literally takes 20 seconds. I know the issue. And the dynamic part one are mainly it. That's why I suggested what I told you.
Click to expand...
Click to collapse
I think he'd rather take the chance of boot looping your advice was the best so far

loopypalm said:
Too many things to just edit a prop ...
plus the prop was not the only problem i got, i could not write to some folders in system
i think he fixed the problem in 24 ,but i'll keep using 21.1 anyway ...
Click to expand...
Click to collapse
Sadly the issue persists and i haven't made a magisk module before so i may need some help on that one please

I added it to the cloudflare 2.7 zip, i expect i shouldn't see it in the build.prop still but it would be loaded in memory? as i have it in the build.prop, the line i wish to have but set to 0 when i have set it to 1 on the system.prop file
(to clarify the line was in the build,prop by stock set to 0)