Q&A for [TOT][RESTORE] LG LS991 ZV5 TOT
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOT][RESTORE] LG LS991 ZV5 TOT. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Stuck on Setup after TOT Restore for the Sprint LG G4
I ran into a problem after I followed the steps to restore my LG G4. Now I cant get through the setup process without it returning me to "Set Internet Connection screen". I have a video of this happening but I'm unable to post the link because I'm a new user.
It still returned me to the same screen after I connected to my home wifi and entered my google account info that I last used on there. I also have a video of this.
Stuck_On_Setup said:
I ran into a problem after I followed the steps to restore my LG G4. Now I cant get through the setup process without it returning me to "Set Internet Connection screen". I have a video of this happening but I'm unable to post the link because I'm a new user.
It still returned me to the same screen after I connected to my home wifi and entered my google account info that I last used on there. I also have a video of this.
Click to expand...
Click to collapse
Possibly try restoring again?
Any way of using this TOT method after flashing the US991 firmware? I keep getting "DoDownload Error!!!"
ironbesterer said:
Possibly try restoring again?
Click to expand...
Click to collapse
Ive tried restoring again and got the same result. Also, when I first ran the flash tool I got a "DBMS" window with four options. After doing some research I found out that this shouldn't be happening. So I made sure that the new MegaLock.ddll was being replaced but i still got the same window.
Stuck_On_Setup said:
Ive tried restoring again and got the same result. Also, when I first ran the flash tool I got a "DBMS" window with four options. After doing some research I found out that this shouldn't be happening. So I made sure that the new MegaLock.ddll was being replaced but i still got the same window.
Click to expand...
Click to collapse
Happening to me as well, tried both Windows 10 64 bit and Windows 8 64 bit.
ijball said:
Happening to me as well, tried both Windows 10 64 bit and Windows 8 64 bit.
Click to expand...
Click to collapse
Are you also stuck trying to get past the "Set Internet Connection"
Thanks A lot GOD BLESS YOU
I have this same issue 2 g4 on bootloop one i was flashed to verizon kdz I will try to flash sprint rooted system img and then flash tot file and let you know
Any way very thanx to you
You are the best
one more Thing Please
any one have the unlocked sprint g4 so please root it and via root explorer please backup the node.db and node_journal.db which was placed on root/system/carrier/app please upload those to .db extensions files and try to unlock ls991 phones
PLEASE UPLOAD THOSE FILE FROM UNLOCKED SPRINT G4
I think this was the solution for unlocking
Thanx in advance
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Very Very thanx to you
you are the best
one more Thing Please
any one have the unlocked sprint g4 so please root it and via root explorer please backup the node.db and node_journal.db which was placed on root/system/carrier/app please those to .db extensions files and upload it to try to unlock ls991 phones
PLEASE UPLOAD THOSE FILE FROM UNLOCKED SPRINT G4
I think this was the solution for unlocking
By pass DLL
I had the same problem and can fix it, you have to download this file and put it in the DLL option in LG Flash Tool, with TOT Sprint.
http://www.mediafire.com/download/jdlyk28pygp1idj/dll+mod.dll
Stuck_On_Setup said:
Are you also stuck trying to get past the "Set Internet Connection"
Click to expand...
Click to collapse
I'm not encountering that error but I keep getting "DoDownload Error!!!". When given the choice for DBMS, I tried both Korea one, and the Global one. I've read that I shouldn't be getting that prompt in the first place.
LG G4 LS991 Factory reset status 2.
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
try board DL mode, instead upgrade dL
homero_2000 said:
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
Click to expand...
Click to collapse
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
ijball said:
Any way of using this TOT method after flashing the US991 firmware? I keep getting "DoDownload Error!!!"
Click to expand...
Click to collapse
cudos01 said:
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
Click to expand...
Click to collapse
Thanks, I tried this. It flashed but when the phone automatically rebooted, I got the download error on the flash tool. Is that normal? The phone booted properly but I haven't played around it yet. Will let you guys know after I played around with it.
If it flash pass 80% and phone reboot then you are good. Glad it work for you
ijball said:
Thanks, I tried this. It flashed but when the phone automatically rebooted, I got the download error on the flash tool. Is that normal? The phone booted properly but I haven't played around it yet. Will let you guys know after I played around with it.
Click to expand...
Click to collapse
cudos01 said:
If it flash pass 80% and phone reboot then you are good. Glad it work for you
Click to expand...
Click to collapse
Thanks, btw for those that tried this method. Is /carriers/app still in your phone? I can only find an empty /carrier directory.
EDIT: NVM, I tried inserting my non US GSM SIM and it's already being recognized. Will try if I'll have data.
EDIT2: Data is now working. I'm outside US.
Select Board DL
homero_2000 said:
I restore my ls991. but at the end the phone stuck in a blue screen with this message " Factory Reset Status 2". please could you help?
Click to expand...
Click to collapse
For this problem you have to select the Board DL in LG Flash Tool
flash tot problem ls991
AFTER USE THIS METHOD MI LG has remained on a blue screen says factory reset status and puts a large 2
I CAN DO THIS WELL BEFORE THIS
Try board DL mode, instead of Upgrade Mode. Good luck
bryan4mer said:
AFTER USE THIS METHOD MI LG has remained on a blue screen says factory reset status and puts a large 2
I CAN DO THIS WELL BEFORE THIS
Click to expand...
Click to collapse
cudos01 said:
You need to download a hex editor and change the header of the tot file from the LS991 to the US991 version. When flashing use the board DL mode, not upgrade mode. Hope this helps.
Search for 991 and look for VLGLS991 and LS991ZV5_05, change it to your US991 file name. In the picture i modified it for the verizon rom I flashed. Yours will be different since you flashed the US991 version. Good Luck
Click to expand...
Click to collapse
its working , thanks a lot....
Related
So i have seen many guys charging a good amount of money for this, DFS is charging like 50$ per phone. Many guys are struggling to get thr phone working since they are unable to flash Akey/SPC which is needed for some carriers like Reliance, TATA in India atleast.
I'm not going to put usual diag setup stuff right now, or may not able to update it at all.
The below commands should be sent step by step as mentioned through DFS or CDMA workshop or any other tools which you prefer to use. Also you need to first send the 16 digit password for your phone model. I believe for L720 it is "2012112120131219"
----To change SPC to 000000 or any anything
00
4B13030000000000
4B130F006E766D2F6E756D2F383500
4B1308006E766D2F6E756D2F383500
4B13020041020000B60100006E766D2F6E756D2F383500
4B1305000000000000000000303030303030
4B13030000000000
Click to expand...
Click to collapse
In the second last line i.e. "4B1305000000000000000000303030303030", the last 12 digits are your SPC hex value, if you want to change it to anything else like 123456, you need to edit the last 12 digits and make it look like "4B1305000000000000000000313233343536"
----To change the A-Key to anything, in the below case, akey decimal to be flashed is 11111111133333333785 (the akey hex will be: 9A3298B4E238A719)
00
4B13030000000000
4B130F006E766D2F6E756D2F323500
4B1308006E766D2F6E756D2F323500
4B13020041020000B60100006E766D2F6E756D2F323500
4B130500000000000000000019A738E2B498329A
4B13030000000000
Click to expand...
Click to collapse
In the above cmds, if you take a close look at the last 16 characters in the 2nd last line and the mentioned akey hex, you maybe observe that the akey hex in the cmd is in a reverse manner. You can change generate your akey online or via regular tools like DFS and arrange it in the similar manner to flash. You might need to downgrade your modem in order to get this working, please post here if it works without downgrading the modem.
This has been tested on 2xGalaxy Victory and one Sprint L720, so please test and report if this works for you.
funkym0nk3y said:
Mods
if this has been posted in wrong section, then please pardon my ignorance and kindly move it to appropriate section.
Click to expand...
Click to collapse
Good write up. I flash phones and make tutorials. Some people on here claim they can do this and do that but, haven't written a clear guide yet on how to do it. Lol But, my guides are free and to the public.
Also this should be in the general section. Development is only for roms, etc.
as for resetting the SPC, you will need to downgrade the modem from MF9 to MDL or MDC... i have tried it with MF9 and didn't work...
thanks for sharing
PapaDocta said:
as for resetting the SPC, you will need to downgrade the modem from MF9 to MDL or MDC... i have tried it with MF9 and didn't work...
thanks for sharing
Click to expand...
Click to collapse
If you dont mind someone asking, how do you downgrade the modem? I tried to downgrade the complete os from samsung-udpates but nothing has worked for me.... any other suggestions??? thx in advance
to downgrade the modem just download the old modem's tar file and flash it via odin.. it should work without any problems
PapaDocta said:
to downgrade the modem just download the old modem's tar file and flash it via odin.. it should work without any problems
Click to expand...
Click to collapse
I actually tried that and still nothing! Maybe i just have a phone that wont take....? I have tried several os downgrades and last resort was the modem downgrade and still the same result: UNABLE TO USE THE 16 DIGIT PASSWORD TO ACCEPT ON WORKSHOP.....
I appreciate your input and help brother thx again.
If you're serious about flashing phones you should invest the proper amount of money, in the proper tools.
slawson said:
If you're serious about flashing phones you should invest the proper amount of money, in the proper tools.
Click to expand...
Click to collapse
TKS BRO
Thank you this is the only thing i have seen that has actually had some success, at least i did not get any errors but how do i know if the akey is in if i press read i just get a lot of cps errors. DOes the trial version of dfs not let you do anything in the cave ?
anyway thanks again hopefully this works.
Many parameters on a number of phones are write only, so you won't be able to read them.
flashing rom fear
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
jarcher12 said:
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
Click to expand...
Click to collapse
To answer my own question since nobody else did
Dont worry i just installed the one click mf9 rom and am now free of nags for reboot and the annoying register phone on sprint. very happy with the phone and its performance, blows my old epic out the water.
Hi,
did anyone try to change the akey for Sprint Note 3... ? N900P
thanks in advance...
Add to my Framily!!!!
A00275186Ak
Thank You!
jarcher12 said:
So I got my phone working on my cdma carrier in Indonesia. But now I am concerned about flashing New roms esp using Odin and factory resetting. Will I lose my settings with a factory reset?
How do I flash roms and still keep my network settings?
Thanks
Click to expand...
Click to collapse
Using cwm to flash another rom
Sent from my SPH-L720 using XDA Premium 4 mobile app
I have a Sprint SPH-L720. I tired to use the command 4B1305000000000000000000303030303030 it accepts it but responds back with a differnt command and the SPC doesn't change.
I did downgrade the baseband to both MDC and MDL with it still not working.
Any ideas how to change the SPC to 000000?
Been awhile but I thought I posted an update. Downgraded to the MDC modem and tired again and it solved my problem.
Thank you for the awesome post.
Using the command
please how will i make use of this command.
i am currently using Sprint SPH-L720T
any other methods of changing spc?
Okijaamaka said:
please how will i make use of this command.
i am currently using Sprint SPH-L720T
any other methods of changing spc?
Click to expand...
Click to collapse
You need a PC software such as DFS to send these command to your phone. You also have to enable diag mode in your phone before connecting it to the PC's USB.
rizapn said:
You need a PC software such as DFS to send these command to your phone. You also have to enable diag mode in your phone before connecting it to the PC's USB.
Click to expand...
Click to collapse
i have DFS but do you have step by step on how to connect it?
please. want to change my spc to 000000
My phone has no network and it says no sim card. After further investigation it appears that this is because the IMEI number has just gone, it doesnt exist on the phone. It is standard I have never changed software so have no idea how this could happen. Tried factory reset but nothing works. Any ideas greatly appreciated.
Re flash stock firmware and it should come back
Sent from my Nexus 5 using Tapatalk
Flash it to stock.
Root it
Install es explorer or any root explorer
Install hex editor
In es explorer go to efs folder in root
Open nv_data.bin in hex editor
Goto position 00188020 and check. .
Sent from my GT-I9500 using XDA Premium HD app
amit.talukdar said:
Flash it to stock.
Root it
Install es explorer or any root explorer
Install hex editor
In es explorer go to efs folder in root
Open nv_data.bin in hex editor
Goto position 00188020 and check. .
Sent from my GT-I9500 using XDA Premium HD app
Click to expand...
Click to collapse
This is still not a Samsung forum.
Sent from my OmniROM-powered LG Optimus 4X HD
Try to pull dev/block/platform/sdhci-tegra.3/by-name/NVA
Open with text editor.
Check if imei is stored.
This partition is recreated on flashing dz/kdz. I am not sure if IMEI is read from here. If you give email i will send you my NVA partition to compare. Don't post it or people will see your IMEI
Sent from my LG-P880 using xda app-developers app
Hi...I have similar problem ...my LG-P880 dont show the IMEI and factory reset is also not working...as per above I have checked in NVA folder it cotains proper IMEI number...so any idea how to fix the situation...? Thanks in advnace...
jigneshandroid said:
Hi...I have similar problem ...my LG-P880 dont show the IMEI and factory reset is also not working...as per above I have checked in NVA folder it cotains proper IMEI number...so any idea how to fix the situation...? Thanks in advnace...
Click to expand...
Click to collapse
Try Flashing using either by KDZ or LG Flash tool it might help you,
Try below link for procedure of LG Flash Tool
http://forum.xda-developers.com/showthread.php?t=2179126
KDZ Method
http://forum.xda-developers.com/showthread.php?t=2069723
Read the steps and understand it properly,
Hit thanks button below,if this help you out
Good Luck:good:
Salman Al-Badgail said:
Try Flashing using either by KDZ or LG Flash tool it might help you,
Try below link for procedure of LG Flash Tool
http://forum.xda-developers.com/showthread.php?t=2179126
KDZ Method
http://forum.xda-developers.com/showthread.php?t=2069723
Read the steps and understand it properly,
Hit thanks button below,if this help you out
Good Luck:good:
Click to expand...
Click to collapse
Thanks for your guidance...I have tried both option but it get stuck in middle somewhere and not able to flash the kdz file.
So at this moment LG Mobile support tools not able to cross 10% in firmware update process and stops due to some error.
With KDZ update tools, same situation....and device can connect to adb terminal no other recovery mode options.
So using adb terminal is there any chances to do some fix ?
I think I have currupted my boot loader during installation of third party recovery software without doing boot loader unlock option.
Please guide or suggest any other try.....
Thanks
jigneshandroid said:
Thanks for your guidance...I have tried both option but it get stuck in middle somewhere and not able to flash the kdz file.
So at this moment LG Mobile support tools not able to cross 10% in firmware update process and stops due to some error.
With KDZ update tools, same situation....and device can connect to adb terminal no other recovery mode options.
So using adb terminal is there any chances to do some fix ?
I think I have currupted my boot loader during installation of third party recovery software without doing boot loader unlock option.
Please guide or suggest any other try.....
Thanks
Click to expand...
Click to collapse
How you get into this problem?
Give me your BL - status, Secondly try changing PC. Also let me know what ROM you were using before getting into this problem (Stock/Custom)
Thirdy Party softwares (recovery) like....?
If you just give us info, someone might help you properly. I am just a Junior Member here, helping you out the info i had.
[Edited : Sorry for my English, I am Arabic]
Salman Al-Badgail said:
How you get into this problem?
Give me your BL - status, Secondly try changing PC. Also let me know what ROM you were using before getting into this problem (Stock/Custom)
Thirdy Party softwares (recovery) like....?
If you just give us info, someone might help you properly. I am just a Junior Member here, helping you out the info i had.
[Edited : Sorry for my English, I am Arabic]
Click to expand...
Click to collapse
It was happened like......the phone was working ok with latest official updates V20A and suddenly lost the IMEI number so Mobile network also. After some try finally I have done factory reset..but it was not working as expected...some time it has shown IMEI but lost also...tried many time factory reset but not worked...so tried with LG Mobile repair under upgrade and recovery option but it was failing at 10 % everytime. So thought lets intall new ROM so decided to install cyanogonmod so for preparation rooted phone and installed CWM recovery ....as doing all this first time so may be forgot to unlock the bootloader so after installation of CWM recovery phone has not booted and also not going to recovery menu. After that under upgrade mode tried to burn KDZ file using LG mobile support tool but that also not working.
So now the situation is, the can only go in to firmware update mode and some time getting connected to adb terminal.
So now is there any change of BL repair through adb terminal or the only option remain is visit LG support....?
Please guide....
Thanks,
jigneshandroid said:
It was happened like......the phone was working ok with latest official updates V20A and suddenly lost the IMEI number so Mobile network also. After some try finally I have done factory reset..but it was not working as expected...some time it has shown IMEI but lost also...tried many time factory reset but not worked...so tried with LG Mobile repair under upgrade and recovery option but it was failing at 10 % everytime. So thought lets intall new ROM so decided to install cyanogonmod so for preparation rooted phone and installed CWM recovery ....as doing all this first time so may be forgot to unlock the bootloader so after installation of CWM recovery phone has not booted and also not going to recovery menu. After that under upgrade mode tried to burn KDZ file using LG mobile support tool but that also not working.
So now the situation is, the can only go in to firmware update mode and some time getting connected to adb terminal.
So now is there any change of BL repair through adb terminal or the only option remain is visit LG support....?
Please guide....
Thanks,
Click to expand...
Click to collapse
Did you check your BL status for now?
3845#*880#
Salman Al-Badgail said:
Did you check your BL status for now?
3845#*880#
Click to expand...
Click to collapse
At present phone is not booting so not able run any short cut commands....but before crash it was showing status locked...
I will try as per your message ...will update the results...
Thanks
jigneshandroid said:
At present phone is not booting so not able run any short cut commands....but before crash it was showing status locked...
I will try as per your message ...will update the results...
Thanks
Click to expand...
Click to collapse
Great, will be waiting for your answer
Salman Al-Badgail said:
Great, will be waiting for your answer
Click to expand...
Click to collapse
I am trying with the links you have provided to flash the ROM, but before I start it...getting problem to keep the device connected to USB port...in device manager on connection it shows connected under Ports but in few seconds it gets disconnected (like timeout)..so exploring how can I keep it connected so that can try the tools once more.
jigneshandroid said:
I am trying with the links you have provided to flash the ROM, but before I start it...getting problem to keep the device connected to USB port...in device manager on connection it shows connected under Ports but in few seconds it gets disconnected (like timeout)..so exploring how can I keep it connected so that can try the tools once more.
Click to expand...
Click to collapse
Did you downloaded the files??
Install Drivers and follow the steps properly,
this should work for you to keep connected,
One more thing run drivers and flashtool as administrator, I already PM you.
Still having problems, please let me know.
If your phone is still not booting, I am afraid that you bricked it.
Good Luck
Salman Al-Badgail said:
Did you downloaded the files??
Install Drivers and follow the steps properly,
this should work for you to keep connected,
One more thing run drivers and flashtool as administrator, I already PM you.
Still having problems, please let me know.
If your phone is still not booting, I am afraid that you bricked it.
Good Luck
Click to expand...
Click to collapse
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
jigneshandroid said:
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
Click to expand...
Click to collapse
Post a screenshot so that anyone could help you.
jigneshandroid said:
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2179126
Try using post #7 by RuedasLocas
and read it untill you get it.
:good:
Salman Al-Badgail said:
http://forum.xda-developers.com/showthread.php?t=2179126
Try using post #7 by RuedasLocas
and read it untill you get it.
:good:
Click to expand...
Click to collapse
OK..thanks I will check this post whether somebody has reported similar problem...do you mean page 7 is it ?
:good:
jigneshandroid said:
OK..thanks I will check this post whether somebody has reported similar problem...do you mean page 7 is it ?
:good:
Click to expand...
Click to collapse
Page 1 -> post #7 by RuedasLocas
Hey guys, i've been following this thread over here: http://forum.xda-developers.com/showthread.php?t=2456338 on getting Wifi Tether to work on my G2. I'd post in that thread, but i don't have permissions to.
I was able to get things to work on 4.2.2, but after the upgrade to 4.4.2, it stopped working. So i grabbed the updated APK, removed the odex file, set permissions and rebooted. I get the same error as the poster on page one, "Unfortunately, Settings has stopped." However i don't have any apps frozen.
Any ideas guys? Thanks!
replace
JA64Flyers said:
Hey guys, i've been following this thread over here: http://forum.xda-developers.com/showthread.php?t=2456338 on getting Wifi Tether to work on my G2. I'd post in that thread, but i don't have permissions to.
I was able to get things to work on 4.2.2, but after the upgrade to 4.4.2, it stopped working. So i grabbed the updated APK, removed the odex file, set permissions and rebooted. I get the same error as the poster on page one, "Unfortunately, Settings has stopped." However i don't have any apps frozen.
Any ideas guys? Thanks!
Click to expand...
Click to collapse
replace HotspotProvision with attached file... it will work 100% on kitkat 4.4.2 if you face any problem.. then msg me...
fadi81 said:
replace HotspotProvision with attached file... it will work 100% on kitkat 4.4.2 if you face any problem.. then msg me...
Click to expand...
Click to collapse
I gave that a shot and it didn't change my result. Fadi81 suggested an LG Update Tool. Is this the tool?
My searching didn't turn up much of a result. From what i gather, this pushes the update back out to my phone, probably overwriting Root in the process. Is this what i should be trying next?
*Edit: apparently i'm not allowed to post URL links either. -.- So here it is broken down: lg.com / us / support-mobile / lg-VS980#software, then there's a link at the bottom saying "LG G2 VS980 SOFTWARE UPDATE" and there's an update program listed there.
JA64Flyers said:
I gave that a shot and it didn't change my result. Fadi81 suggested an LG Update Tool. Is this the tool?
My searching didn't turn up much of a result. From what i gather, this pushes the update back out to my phone, probably overwriting Root in the process. Is this what i should be trying next?
*Edit: apparently i'm not allowed to post URL links either. -.- So here it is broken down: lg.com / us / support-mobile / lg-VS980#software, then there's a link at the bottom saying "LG G2 VS980 SOFTWARE UPDATE" and there's an update program listed there.
Click to expand...
Click to collapse
download attachment istall lg g2vs980 usb driver... put your phone into download ( when phone power off press volume up butten and insert usb cable this will go into download mode)
run then software... press option and then update recovery..... lg mobile support tool will download new software for your mobile install after that....
after fresh installation root your phone and replace file which i attached earlier..... good luck... i hope this will solve your problem....
LGMobile Support Tool
LGMobile Support Tool... download
format
and don't forget to format your mobile after new installation then go to replace your file....
fadi81 said:
and don't forget to format your mobile after new installation then go to replace your file....
Click to expand...
Click to collapse
An infinite number of thanks to you my friend! After operation 'clean slate', it's working perfectly. I must have forcibly removed something with titanium backup, or fragged something critical somewhere.
Edit: Just realized this wiped my SD card too. >_< Didn't see that coming. guess it's REALLY a clean slate now, lol.
Hi. I am in the UK and have the first gen moto x. i was dicking around with roms etc and i ended up accidentally erasing internal storage. I managed to the get the phone back to how it was apart from the fact that it cannot make calls, text, get 3g signal. it is essentially a small tablet. when i use the dialler code to show the imei number it is 0. i tried reinstalling modems etc and none have worked. i have tried differnet roms and even flashing lollipop. I am wondering if the modems files i am using are not working because they are US files and I need some kind of EU file? Idk.
I had my imei written down so i was going to try and change it to that on the phone but engineer tools does not open or even seem to exist on the phone. i cant try using the stock rom etc because it is on a site (something like sbf developers ) that says it is forbidden. i literally have tried everything. can anyone help? :crying:
azerouz said:
Hi. I am in the UK and have the first gen moto x. i was dicking around with roms etc and i ended up accidentally erasing internal storage. I managed to the get the phone back to how it was apart from the fact that it cannot make calls, text, get 3g signal. it is essentially a small tablet. when i use the dialler code to show the imei number it is 0. i tried reinstalling modems etc and none have worked. i have tried differnet roms and even flashing lollipop. I am wondering if the modems files i am using are not working because they are US files and I need some kind of EU file? Idk.
I had my imei written down so i was going to try and change it to that on the phone but engineer tools does not open or even seem to exist on the phone. i cant try using the stock rom etc because it is on a site (something like sbf developers ) that says it is forbidden. i literally have tried everything. can anyone help? :crying:
Click to expand...
Click to collapse
Hey! If you've installed a US ROM, you are using the wrong baseband files to access your service provider network ( XT1053- US ; XT1052- UK)
Try installing an XT1052 based rom and report back . Also, be careful while flashing your new chosen ROM. Ensure that it does not downgrade / modify your current bootloader as you may end up bricking your phone (since you've upgraded to LP)
Best of luck mate .
Bhargav4591 said:
Hey! If you've installed a US ROM, you are using the wrong baseband files to access your service provider network ( XT1053- US ; XT1052- UK)
Try installing an XT1052 based rom and report back . Also, be careful while flashing your new chosen ROM. Ensure that it does not downgrade / modify your current bootloader as you may end up bricking your phone (since you've upgraded to LP)
Best of luck mate .
Click to expand...
Click to collapse
Ty for the reply. I just tried flashing a rom for the 52 instead of the 53 and twrp gives an error message of "This package is for the device: xt1052 ghost, xt1052 ghost etc.. this device is ." the etc is just a couple more models but the device doesnt seem to know what it is? its saying becuase it is for the 52 it cannot install even though the device is the 52.
azerouz said:
Ty for the reply. I just tried flashing a rom for the 52 instead of the 53 and twrp gives an error message of "This package is for the device: xt1052 ghost, xt1052 ghost etc.. this device is ." the etc is just a couple more models but the device doesnt seem to know what it is? its saying becuase it is for the 52 it cannot install even though the device is the 52.
Click to expand...
Click to collapse
Strange . Do elaborate as to what rom you are flashing and which rom you are currently using (The one that has a problem).
Also, are you wiping the system before flashing ?
Bhargav4591 said:
Strange . Do elaborate as to what rom you are flashing and which rom you are currently using (The one that has a problem).
Also, are you wiping the system before flashing ?
Click to expand...
Click to collapse
Hi again. i googled xt1052 rom and found a few. the one i tried was cyanhacker(obviously based on cm). after i got that error i tried editing the updater script to skip over the process in which it checks what device it is on. after that it appeared to flash successfully but when i tried to boot it showed the bootloader unlocked screen, vibrated then restarted and just kept doing that bootloop.
azerouz said:
Hi again. i googled xt1052 rom and found a few. the one i tried was cyanhacker(obviously based on cm). after i got that error i tried editing the updater script to skip over the process in which it checks what device it is on. after that it appeared to flash successfully but when i tried to boot it showed the bootloader unlocked screen, vibrated then restarted and just kept doing that bootloop.
Click to expand...
Click to collapse
1. Please download the correct ROM for your device from here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
2. Head over here: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515 and follow the Instructions. CAUTION: If you decide yourself for manual flashing DO NOT PASTE THIS CODE:
Code:
fastboot oem config carrier vzw
Or you'll end up, like me: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
In case I could help you with some guidance, I would be happy, if you could help me, in my thread.
//EDIT: Your battery should be on 70% or more, before you try to do anything! Keep this in mind, else flashing could be interrupted!
Kind regards
Xanthales said:
1. Please download the correct ROM for your device from here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
2. Head over here: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515 and follow the Instructions. CAUTION: If you decide yourself for manual flashing DO NOT PASTE THIS CODE:
Code:
fastboot oem config carrier vzw
Or you'll end up, like me: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
In case I could help you with some guidance, I would be happy, if you could help me, in my thread.
//EDIT: Your battery should be on 70% or more, before you try to do anything! Keep this in mind, else flashing could be interrupted!
Kind regards
Click to expand...
Click to collapse
Thankyou so much. did what you said. tinkered in twrp. flashed a lollipop rom and made a call. My man right here <3
azerouz said:
Thankyou so much. did what you said. tinkered in twrp. flashed a lollipop rom and made a call. My man right here <3
Click to expand...
Click to collapse
No problem, im glad to hear, that I could help you!
Maybe you can help me here?: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
This would be awesome, if you got a retail device!
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
An3ru said:
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
Click to expand...
Click to collapse
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
raptorddd said:
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
Click to expand...
Click to collapse
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
An3ru said:
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
Click to expand...
Click to collapse
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
An3ru said:
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
Click to expand...
Click to collapse
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
raptorddd said:
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
Click to expand...
Click to collapse
Ok, but i might not be able to return it since its past the year. And with LGup I open the software and states that MODEL "unknown" and gets the COM port and the software im runing in a small window. Is there any fix for it, that you know of?.
An3ru said:
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
Click to expand...
Click to collapse
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
raptorddd said:
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
Click to expand...
Click to collapse
I have it, but I attempt to flash it with lgflashtools and still stuck at 9%. Also tried LGup, and still im unable to do anything with that program