Database Develop

[Q] Phone has lost its IMEI number!!

My phone has no network and it says no sim card. After further investigation it appears that this is because the IMEI number has just gone, it doesnt exist on the phone. It is standard I have never changed software so have no idea how this could happen. Tried factory reset but nothing works. Any ideas greatly appreciated.

Re flash stock firmware and it should come back
Sent from my Nexus 5 using Tapatalk

Flash it to stock.
Root it
Install es explorer or any root explorer
Install hex editor
In es explorer go to efs folder in root
Open nv_data.bin in hex editor
Goto position 00188020 and check. .
Sent from my GT-I9500 using XDA Premium HD app

amit.talukdar said:
Flash it to stock.
Root it
Install es explorer or any root explorer
Install hex editor
In es explorer go to efs folder in root
Open nv_data.bin in hex editor
Goto position 00188020 and check. .
Sent from my GT-I9500 using XDA Premium HD app
Click to expand...
Click to collapse
This is still not a Samsung forum.
Sent from my OmniROM-powered LG Optimus 4X HD

Try to pull dev/block/platform/sdhci-tegra.3/by-name/NVA
Open with text editor.
Check if imei is stored.
This partition is recreated on flashing dz/kdz. I am not sure if IMEI is read from here. If you give email i will send you my NVA partition to compare. Don't post it or people will see your IMEI
Sent from my LG-P880 using xda app-developers app

Hi...I have similar problem ...my LG-P880 dont show the IMEI and factory reset is also not working...as per above I have checked in NVA folder it cotains proper IMEI number...so any idea how to fix the situation...? Thanks in advnace...

jigneshandroid said:
Hi...I have similar problem ...my LG-P880 dont show the IMEI and factory reset is also not working...as per above I have checked in NVA folder it cotains proper IMEI number...so any idea how to fix the situation...? Thanks in advnace...
Click to expand...
Click to collapse
Try Flashing using either by KDZ or LG Flash tool it might help you,
Try below link for procedure of LG Flash Tool
http://forum.xda-developers.com/showthread.php?t=2179126
KDZ Method
http://forum.xda-developers.com/showthread.php?t=2069723
Read the steps and understand it properly,
Hit thanks button below,if this help you out
Good Luck:good:

Salman Al-Badgail said:
Try Flashing using either by KDZ or LG Flash tool it might help you,
Try below link for procedure of LG Flash Tool
http://forum.xda-developers.com/showthread.php?t=2179126
KDZ Method
http://forum.xda-developers.com/showthread.php?t=2069723
Read the steps and understand it properly,
Hit thanks button below,if this help you out
Good Luck:good:
Click to expand...
Click to collapse
Thanks for your guidance...I have tried both option but it get stuck in middle somewhere and not able to flash the kdz file.
So at this moment LG Mobile support tools not able to cross 10% in firmware update process and stops due to some error.
With KDZ update tools, same situation....and device can connect to adb terminal no other recovery mode options.
So using adb terminal is there any chances to do some fix ?
I think I have currupted my boot loader during installation of third party recovery software without doing boot loader unlock option.
Please guide or suggest any other try.....
Thanks

jigneshandroid said:
Thanks for your guidance...I have tried both option but it get stuck in middle somewhere and not able to flash the kdz file.
So at this moment LG Mobile support tools not able to cross 10% in firmware update process and stops due to some error.
With KDZ update tools, same situation....and device can connect to adb terminal no other recovery mode options.
So using adb terminal is there any chances to do some fix ?
I think I have currupted my boot loader during installation of third party recovery software without doing boot loader unlock option.
Please guide or suggest any other try.....
Thanks
Click to expand...
Click to collapse
How you get into this problem?
Give me your BL - status, Secondly try changing PC. Also let me know what ROM you were using before getting into this problem (Stock/Custom)
Thirdy Party softwares (recovery) like....?
If you just give us info, someone might help you properly. I am just a Junior Member here, helping you out the info i had.
[Edited : Sorry for my English, I am Arabic]

Salman Al-Badgail said:
How you get into this problem?
Give me your BL - status, Secondly try changing PC. Also let me know what ROM you were using before getting into this problem (Stock/Custom)
Thirdy Party softwares (recovery) like....?
If you just give us info, someone might help you properly. I am just a Junior Member here, helping you out the info i had.
[Edited : Sorry for my English, I am Arabic]
Click to expand...
Click to collapse
It was happened like......the phone was working ok with latest official updates V20A and suddenly lost the IMEI number so Mobile network also. After some try finally I have done factory reset..but it was not working as expected...some time it has shown IMEI but lost also...tried many time factory reset but not worked...so tried with LG Mobile repair under upgrade and recovery option but it was failing at 10 % everytime. So thought lets intall new ROM so decided to install cyanogonmod so for preparation rooted phone and installed CWM recovery ....as doing all this first time so may be forgot to unlock the bootloader so after installation of CWM recovery phone has not booted and also not going to recovery menu. After that under upgrade mode tried to burn KDZ file using LG mobile support tool but that also not working.
So now the situation is, the can only go in to firmware update mode and some time getting connected to adb terminal.
So now is there any change of BL repair through adb terminal or the only option remain is visit LG support....?
Please guide....
Thanks,

jigneshandroid said:
It was happened like......the phone was working ok with latest official updates V20A and suddenly lost the IMEI number so Mobile network also. After some try finally I have done factory reset..but it was not working as expected...some time it has shown IMEI but lost also...tried many time factory reset but not worked...so tried with LG Mobile repair under upgrade and recovery option but it was failing at 10 % everytime. So thought lets intall new ROM so decided to install cyanogonmod so for preparation rooted phone and installed CWM recovery ....as doing all this first time so may be forgot to unlock the bootloader so after installation of CWM recovery phone has not booted and also not going to recovery menu. After that under upgrade mode tried to burn KDZ file using LG mobile support tool but that also not working.
So now the situation is, the can only go in to firmware update mode and some time getting connected to adb terminal.
So now is there any change of BL repair through adb terminal or the only option remain is visit LG support....?
Please guide....
Thanks,
Click to expand...
Click to collapse
Did you check your BL status for now?
3845#*880#

Salman Al-Badgail said:
Did you check your BL status for now?
3845#*880#
Click to expand...
Click to collapse
At present phone is not booting so not able run any short cut commands....but before crash it was showing status locked...
I will try as per your message ...will update the results...
Thanks

jigneshandroid said:
At present phone is not booting so not able run any short cut commands....but before crash it was showing status locked...
I will try as per your message ...will update the results...
Thanks
Click to expand...
Click to collapse
Great, will be waiting for your answer

Salman Al-Badgail said:
Great, will be waiting for your answer
Click to expand...
Click to collapse
I am trying with the links you have provided to flash the ROM, but before I start it...getting problem to keep the device connected to USB port...in device manager on connection it shows connected under Ports but in few seconds it gets disconnected (like timeout)..so exploring how can I keep it connected so that can try the tools once more.

jigneshandroid said:
I am trying with the links you have provided to flash the ROM, but before I start it...getting problem to keep the device connected to USB port...in device manager on connection it shows connected under Ports but in few seconds it gets disconnected (like timeout)..so exploring how can I keep it connected so that can try the tools once more.
Click to expand...
Click to collapse
Did you downloaded the files??
Install Drivers and follow the steps properly,
this should work for you to keep connected,
One more thing run drivers and flashtool as administrator, I already PM you.
Still having problems, please let me know.
If your phone is still not booting, I am afraid that you bricked it.
Good Luck

Salman Al-Badgail said:
Did you downloaded the files??
Install Drivers and follow the steps properly,
this should work for you to keep connected,
One more thing run drivers and flashtool as administrator, I already PM you.
Still having problems, please let me know.
If your phone is still not booting, I am afraid that you bricked it.
Good Luck
Click to expand...
Click to collapse
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh

jigneshandroid said:
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
Click to expand...
Click to collapse
Post a screenshot so that anyone could help you.

jigneshandroid said:
I am able connect my device to LGFlashTool on com Port1 but download fails with below log on port1
StartDownload()
Saved result to XML file.
Failure : 207
FAIL
and same thing repeating as software retries the same.
Can somebody guide what is this situation ?
Thanks and best regards,
Jignesh
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2179126
Try using post #7 by RuedasLocas
and read it untill you get it.
:good:

Salman Al-Badgail said:
http://forum.xda-developers.com/showthread.php?t=2179126
Try using post #7 by RuedasLocas
and read it untill you get it.
:good:
Click to expand...
Click to collapse
OK..thanks I will check this post whether somebody has reported similar problem...do you mean page 7 is it ?
:good:

jigneshandroid said:
OK..thanks I will check this post whether somebody has reported similar problem...do you mean page 7 is it ?
:good:
Click to expand...
Click to collapse
Page 1 -> post #7 by RuedasLocas

Need original aboot.bin from v20a (Android 5.0.2) LG D410

I unfortunately bricked my LG D140... fortunately it detects as a removable device and i managed to find the aboot location using WinHex
But i didn't made a backup of my original aboot.bin from v20a firmware...
Can anyone make a new backup for me? (I will do a tutorial later on how to unbrick)
PS: I too got the dreaded pink screen saying something about Crash Handler...

Sucessfully unbricked my phone.
I maanaged to extract aboot.bin from kdz
Thanks everyone for wtaching this topic

fabiode34 said:
Sucessfully unbricked my phone.
I maanaged to extract aboot.bin from kdz
Thanks everyone for wtaching this topic
Click to expand...
Click to collapse
hi how are you? am new here in the forum, I have the same problem my device fortunately it detects as a removable device.
but I do not do a backup of my original aboot.bin the v20a firmware.
how to solve the problem?
can you help me?
thanks You
sorry my English by Google

aboot.bin l90
friend need the tutorial to unbrick your lg and reinstall aboot.bin my l90 .. help?

fabiode34 said:
Sucessfully unbricked my phone.
I maanaged to extract aboot.bin from kdz
Thanks everyone for wtaching this topic
Click to expand...
Click to collapse
Hello brother could you please provide the aboot.img i am having similar problem and inst able to extract aboot.img.

fabiode34 said:
Sucessfully unbricked my phone.
I maanaged to extract aboot.bin from kdz
Thanks everyone for wtaching this topic
Click to expand...
Click to collapse
Nice to hear you unbricked your phone.
Meh same problem,i have an unextracted a aboot.img,i'm interested what to do next.
Thx.

fabiode34 said:
sucessfully unbricked my phone.
I maanaged to extract aboot.bin from kdz
thanks everyone for wtaching this topic
Click to expand...
Click to collapse
how please help ;( my l90 die ;(((((((((((

Please tell us how did u made it. Same problem here.

A tutorial at your spare time would be very nice. had this same problem, fortunately i was still in waranty

you can download and extract this original from my L90 D410 aboot.img
http://d-h.st/D8xZ

Help - Ascend P7-L10 Locked Soft Bricked

Hi there,
recently, I tried updating my phone to B609, following a certain website's guide.
and upon finishing it, it showed the following attachment.
I have tried following almost all I can to revert it, but sadly, it does not work. and, it was a very stupid decision of me to try and update it, full-knowingly that I have a rather obsolete knowledge regarding this.
Can someone please help me, I am really sorry to have bothered the visitors of this forum, and if my thread is not in it's place, please guide me to find a proper place to help me with my phone.
Thank you

piring said:
Hi there,
recently, I tried updating my phone to B609, following a certain website's guide.
and upon finishing it, it showed the following attachment.
I have tried following almost all I can to revert it, but sadly, it does not work. and, it was a very stupid decision of me to try and update it, full-knowingly that I have a rather obsolete knowledge regarding this.
Can someone please help me, I am really sorry to have bothered the visitors of this forum, and if my thread is not in it's place, please guide me to find a proper place to help me with my phone.
Thank you
Click to expand...
Click to collapse
Please wait confirmation from more experienced users than me but what I would have done if I were you:
1 - Try to unlock the bootloader. For that there are tutorials here in XDA: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
2 - With unlocked bootloader you should be able to flash a new rom!
Hope it helps!

antoniovazquezblanco said:
Please wait confirmation from more experienced users than me but what I would have done if I were you:
1 - Try to unlock the bootloader. For that there are tutorials here in XDA: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
2 - With unlocked bootloader you should be able to flash a new rom!
Hope it helps!
Click to expand...
Click to collapse
Thanks for the reply friend. I really appreciate it.
Regarding the unlock bootloader, following the tutorial that you have greatly linked to, it says in one of the step it to select a device. But, I did not see any mention of Ascend P7, or for that matter, I'm not aware of another given name for Ascend P7, so, which one should I choose or any selected device would be fine?
Thank you again for taking time to help me. Much appreciated.

antoniovazquezblanco said:
Please wait confirmation from more experienced users than me but what I would have done if I were you:
1 - Try to unlock the bootloader. For that there are tutorials here in XDA: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
2 - With unlocked bootloader you should be able to flash a new rom!
Hope it helps!
Click to expand...
Click to collapse
Also, because my phone is stuck in bootloader and can't even reboot to get past the Huawei Ascend screen, how do I get the product ID for my phone? Thank you

try with a usb jig i will try with that

Joseluisska said:
try with a usb jig i will try with that
Click to expand...
Click to collapse
Thanks for the suggestion. But apparently, I believe this is a level beyond my scarce knowledge of electronics.
But I truly appreciate the time you took to reply and suggest ways to help me. Thanks friend.

piring said:
Thanks for the reply friend. I really appreciate it.
Regarding the unlock bootloader, following the tutorial that you have greatly linked to, it says in one of the step it to select a device. But, I did not see any mention of Ascend P7, or for that matter, I'm not aware of another given name for Ascend P7, so, which one should I choose or any selected device would be fine?
Thank you again for taking time to help me. Much appreciated.
Click to expand...
Click to collapse
As it is said in the tutorial you should modify the values of the list in order to include our phone model (step 3 and following...).
Also, because my phone is stuck in bootloader and can't even reboot to get past the Huawei Ascend screen, how do I get the product ID for my phone? Thank you
Click to expand...
Click to collapse
I didn't think of that... I'm sure part of that info is available in the phone case but can't ensure that everything is there...
By the way I've never tried a JIG so any feedback on it would be nice!

i have the some problem... how i had resolved?
have u found a flashabe zip stock rom? or other way?

piring said:
Hi there,
recently, I tried updating my phone to B609, following a certain website's guide.
and upon finishing it, it showed the following attachment.
I have tried following almost all I can to revert it, but sadly, it does not work. and, it was a very stupid decision of me to try and update it, full-knowingly that I have a rather obsolete knowledge regarding this.
Can someone please help me, I am really sorry to have bothered the visitors of this forum, and if my thread is not in it's place, please guide me to find a proper place to help me with my phone.
Thank you
Click to expand...
Click to collapse
did you manage to solved your problem in your phone?if yes please help me,i got same tia

What is your exact problem? Unlocking the bootloader or flashing a new rom?

Hey bro while flashing lollipop ROM emui 3.1 in my huawei p7 it got stuck in boot loader , so I thought to revert it back to the stock ROM and I backed up my stock ROM through twrp but when I restored it It again locked my boot loader plus its stuck in boot screen... What do I do.... How am I supposed to unlock my boot loader without knowing my phone product I'd ,imei etc.... Previously I unlocked my boot loader through the dload process local update.... Plz help me I'm stuck....

saquib996 said:
Hey bro while flashing lollipop ROM emui 3.1 in my huawei p7 it got stuck in boot loader , so I thought to revert it back to the stock ROM and I backed up my stock ROM through twrp but when I restored it It again locked my boot loader plus its stuck in boot screen... What do I do.... How am I supposed to unlock my boot loader without knowing my phone product I'd ,imei etc.... Previously I unlocked my boot loader through the dload process local update.... Plz help me I'm stuck....
Click to expand...
Click to collapse
Hi,
i guess you have to unlock your bootloader per dload again. You can force an local update by pressing power and volume plus/minus at the same time.
Is the bootloader unlocking local update based on emui2.3? If so, you'd had to downgrade to emui 2.3 (B1xx).
To do so: Flash the downgrade packages(B8xx) first, after that the full rom(B6xx) , then the next downgrade package(B6xx) and the next rom(B1xx).
Probably your phone will boot after the first full rom flash. If it does, you could get the numbers you need, and unlock per fastboot.

l3Nni said:
Hi,
i guess you have to unlock your bootloader per dload again. You can force an local update by pressing power and volume plus/minus at the same time.
Is the bootloader unlocking local update based on emui2.3? If so, you'd had to downgrade to emui 2.3 (B1xx).
To do so: Flash the downgrade packages(B8xx) first, after that the full rom(B6xx) , then the next downgrade package(B6xx) and the next rom(B1xx).
Probably your phone will boot after the first full rom flash. If it does, you could get the numbers you need, and unlock per fastboot.
Click to expand...
Click to collapse
but bro the fact is i dont have acess to phone's internal memory how am i supposed to do... will the local update works through memory card...... i looked every thread n every posts but didnt find any solutions...... plus if i try to unlock boot from huawei official site it is demanding product id but since my phone is stuck i cant know my product id...
and thnxxx bro for ur reply....

saquib996 said:
but bro the fact is i dont have acess to phone's internal memory how am i supposed to do... will the local update works through memory card...... i looked every thread n every posts but didnt find any solutions...... plus if i try to unlock boot from huawei official site it is demanding product id but since my phone is stuck i cant know my product id...
and thnxxx bro for ur reply....
Click to expand...
Click to collapse
Yes, you could just put the update file into a folder named 'dload' in the root directory of your sd card.

l3Nni said:
Yes, you could just put the update file into a folder named 'dload' in the root directory of your sd card.
Click to expand...
Click to collapse
thankxxx bro... ur method worked.... but guess im not lucky enough because now in the update mode its showing battery less than 15% cant update.... and in bootloader i cant charge my phone, the moment i plug in the charger it automatically switch on the device and shows boot failed press volume down button to open bootloader mode.... and my phone's battery start draining instead of charging.... any help with that.... i tried to open the back cover to charge the battery externally, some how youtube taught me to open it but its conneted circuit based and cant recharge externally ..... any help:crying::crying::crying: plz.... and thanxx for ur precious time and reply ,, i deeply thank u bro for ur support..... waiting for ur further instruction.....

saquib996 said:
thankxxx bro... ur method worked.... but guess im not lucky enough because now in the update mode its showing battery less than 15% cant update.... and in bootloader i cant charge my phone, the moment i plug in the charger it automatically switch on the device and shows boot failed press volume down button to open bootloader mode.... and my phone's battery start draining instead of charging.... any help with that.... i tried to open the back cover to charge the battery externally, some how youtube taught me to open it but its conneted circuit based and cant recharge externally ..... any help:crying::crying::crying: plz....
Click to expand...
Click to collapse
You could try to boot to recovery pressing power and volume-. Does the battery charge then? I'd try myself, but my mum got my P7.. If it doesn't work you may try this script: http://forum.xda-developers.com/showthread.php?t=1658084. And if that all fails you could purchase a new battery as your final option.
Please don't try to charge your phone externally. Handling with LiOn-batterys without knowing exactly what you do could be quite dangerous.
saquib996 said:
and thanxx for ur precious time and reply ,, i deeply thank u bro for ur support..... waiting for ur further instruction.....
Click to expand...
Click to collapse
You're very welcome, I'm glad when I could help.

l3Nni said:
You're very welcome, I'm glad when I could help.
Click to expand...
Click to collapse
Bro some how my phone got charged I plugged it for the whole night and it got charged..... finally flashed with lollipop emui 3.1....
And bro sorry to bother u since u use p7 I wanted to ask that is cynogen mod available for p7 if yes then how should I flash it... I got B832 emui 3.1 and android version 5.1.1..... any idea about cynogen mod or any other rom... which one should be better....

saquib996 said:
Bro some how my phone got charged I plugged it for the whole night and it got charged..... finally flashed with lollipop emui 3.1....
And bro sorry to bother u since u use p7 I wanted to ask that is cynogen mod available for p7 if yes then how should I flash it... I got B832 emui 3.1 and android version 5.1.1..... any idea about cynogen mod or any other rom... which one should be better....
Click to expand...
Click to collapse
There are no custom roms for lollipop, unfortunately. So you have to stick with the stock one.

l3Nni said:
There are no custom roms for lollipop, unfortunately. So you have to stick with the stock one.
Click to expand...
Click to collapse
Ok bro thanx for the information....... gud bye take care....

saquib996 said:
There are no custom roms for lollipop, unfortunately. So you have to stick with the stock one.
Click to expand...
Click to collapse
Bro are u indian...?
Coz is there any option to change network frequency band coz in india I cannot use 4g because of network band.... plz help if u are indian u must be aware of jio network I cant use it in my phone... waiting for your reply.....

lg l90 d405n imei 0

someone help me fix this http://www.part.lt/perziura/7544e5576976a1b6092ca16490aa2087660.png

Check here: http://forum.xda-developers.com/lg-l90/help/lost-imei-device-t3285130 I had the same problem and I got it fixed using the tutorial that guy posted to me on that link. And since you're already on the KitKat version of android, I think it will be easier for you to fix it. I had to downgrade from Lollipop first in order to use this tutorial.

Lazgeor said:
Check here: http://forum.xda-developers.com/lg-l90/help/lost-imei-device-t3285130 I had the same problem and I got it fixed using the tutorial that guy posted to me on that link. And since you're already on the KitKat version of android, I think it will be easier for you to fix it. I had to downgrade from Lollipop first in order to use this tutorial.
Click to expand...
Click to collapse
but why qpst configuration don't detect my phone i installed all drivers in device manager i don't see ports imei lost after hard unbricked i flash lg l90 d405.img loader but my phone is lg l90 d405n model
http://www.part.lt/perziura/87b4cad117168fb06a60fb40da98405b41.jpg

kietuolis said:
but why qpst configuration don't detect my phone i installed all drivers in device manager i don't see ports imei lost after hard unbricked i flash lg l90 d405.img loader but my phone is lg l90 d405n model
http://www.part.lt/perziura/87b4cad117168fb06a60fb40da98405b41.jpg
Click to expand...
Click to collapse
Well I don't know My phone wasn't getting detected too but since I was on lollipop, when I installed kitkat again it got detected and I was able to finish the tutorial. If I find any more information I'll tell you.

Lazgeor said:
Well I don't know My phone wasn't getting detected too but since I was on lollipop, when I installed kitkat again it got detected and I was able to finish the tutorial. If I find any more information I'll tell you.
Click to expand...
Click to collapse
thanks i'll try to update to lollipop and back to kitkat again maybe it's work

fix fastboot rescue mode

Please Help me
My Huawei Honor 4x
was locked and stay in fastboot and rescue mode
please, how to fix it ?:crying:

I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help

well depends, are you on che2-xx or che1? because i know only about che2, and anyways, what error says in the rescue mode?

Fastboot & Rescue Mode
Thadab said:
I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help
Click to expand...
Click to collapse
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...

solution
download official rom and put update.APP to dload folder on SD card.
than turn off phone and press all three buttons together Volume + and - and power.
It will install fresh os on your phone

Amin Benzema said:
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...
Click to expand...
Click to collapse
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.

hackslash said:
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.
Click to expand...
Click to collapse
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!

Amin Benzema said:
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!
Click to expand...
Click to collapse
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do

hackslash said:
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do
Click to expand...
Click to collapse
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㄰㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!

Amin Benzema said:
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㄰㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!
Click to expand...
Click to collapse
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.

just blinking red light once and green light twice! still alive
hackslash said:
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.
Click to expand...
Click to collapse
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?

farzadmaverick said:
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?
Click to expand...
Click to collapse
No my bro.it's Dead.you should change your mobile mother board with another honor 4x(it's expensive) or you should find a programed EMMC that exactly is for che-tl00h(almost hard to find for this model) or sell your hard bricked phone(best way like my way). Of course you can find your dump files and give them to a technician for flashing on a unprogramed EMMC,but I know you can not find dump files for this model easily.
This is a real experience for focusing on model of the phone that we purchase for next shopping.
We should just buy a Global released model,not a china model.
Persian:dadash manam az alaedin raft tu pacham,vali azin be baad faqat ye bakhshe tahghigham check kardane behtarin o bi dardesar tarin modele un dasgahie k madde nazarame.ke dg eshtebahi nakharam.
Che2-L11 ham modele khubie az honor 4x.

thank you. I already gave up and buy another phone

That's sad

U could have much before giving up , u still own it ?

gopinaidu77 said:
U could have much before giving up , u still own it ?
Click to expand...
Click to collapse
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Amin Benzema said:
Whats the solution??!
Click to expand...
Click to collapse
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!

Amin Benzema said:
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!
Click to expand...
Click to collapse
No u can still fix it buddy. I can help u

gopinaidu77 said:
No u can still fix it buddy. I can help u
Click to expand...
Click to collapse
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.

That will be helpful

Amin Benzema said:
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.
Click to expand...
Click to collapse
So before that , i need some info to make final solution