I have install 12.1 ([5.1.1] [Build 14] [BETA] [2015-08-25] CyanogenMod 12.1 for i9300), everything work very well but I have random blue screen with i9300 (also with rom stock).
The arter97's kernel offer improvements than kernel inside in that image?
i think that last blob for mali included in arter97's kernel can help me...
thank you very much!
Wrong section first. Second, flash Arter97 or Boeffla.
Sent from my GT-I9305 using Tapatalk
Related
Hello!
I'm presenting to you the 1st release of the SkreD KerneL!
You'll not find a full featured kernel, as i'm just beginning in Android compiling.
The SkreD KerneL is based on CM11 sources, and compiled using Linaro Toolchain.
Last Version Informations
version 2
Added Fast Charge (pinkflozd)
Added Intelli plug (faux123)
Added Weathley Governor (fermasia)
Download
Version 2: MEGA
Version 1: MEGA
Credits
Kernel Sources: CM Team
Linaro: @Christopher83
Governors: @fermasia
various patches: @bedalus - @faux123 - @pinkflozd
Compiling Guide: @YoshiShaPow
Sources
CM Kernel: Github
SkreD_Kernel: Github
Changelog
v1 Initial Release
CM11 Sources
Linaro Toolchain 4.7
Added Intellidemand Governor
Installation Instructions
Reboot In recovery
Make a nandroid backup (just in case)
Flash Kernel Zip
Reboot
im guessing it won't work on cm12
Nop, it will not work on cm12.
As i'm still running on 4.4.4, no cm12 version in this time, sorry
Looking great
UPDATE to v2!
changelog and link in OP
Can i flash this on PACman rom 4.4.4?
Sent from my XT1052 using XDA Free mobile app
whisper13 said:
Can i flash this on PACman rom 4.4.4?
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
Yes!
As PAC is not stock based rom, you can flash this kernel.
Hi all,
I attach the most recent stagefright patch I extracted from a recent CM 12.1 Nightly build for pollux windy. This patches the recent vulnerability CVE-2015-6602 as well as all other vulnerability discovered thus far. I have tested this on my daily driver 12.1-20150822-NIGHTLY-pollux_windy. I created this so I could use the most recent release of the EvoMix custom kernel for pollux windy on a rom that was build around the same time as the custom Evo kernel.
This patch should work with all CM 12.1 base roms.
Cheers!
Why don't you simply use a more recent ROM?
BlackAfghan said:
Why don't you simply use a more recent ROM?
Click to expand...
Click to collapse
I would prefer to, but I got a bootloop using your kernel on the available cm nightly but all is working again on August cm nightly build.
For others, this patch gives the community more options for ROMs and have stagefright patched as well.
When your next kernel is finished I'll be sure to upgrade
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
cantenna said:
I would prefer to, but I got a bootloop using your kernel on the available cm nightly but all is working again on August cm nightly build.
For others, this patch gives the community more options for ROMs and have stagefright patched as well.
When your next kernel is finished I'll be sure to upgrade
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Click to expand...
Click to collapse
Are you sure it's not related to Xposed? There were no changes of the CM kernel for 4 weeks..
BlackAfghan said:
Are you sure it's not related to Xposed? There were no changes of the CM kernel for 4 weeks..
Click to expand...
Click to collapse
If memory serves me right, the latest CM nightly plays nice with the most recent release of xposed and your kernel play nice with the latest CM nightly. However, combing the 3 = boot loop. Reverting back to CM August build let's me enjoy both your kernel and xposed and if I have stagefright also patched, I'm doing very well
Sent from my Xperia Tablet Z Wi-Fi using Tapatalk
Unofficial Temasek cm13 and cm12.1.
This is NOT the official maintainer thread for temaseks unofficial cm. This is an unofficial port.
The cm-13.0 port has been passed over to Bauita for the time being. As he has a little more time and he has the device. if you need to you can contact me (trader418) either through PM or twitter @trader418dev
Trader418 will still maintain CM-12.1 port.
Supported devices: ks01lte
Credits:
This is @temasek 's rom that bauita/trader418 has built for this device with @kyasu 's kernel.
Downloads:
CM-13.0 - https://www.androidfilehost.com/?w=files&flid=60245
CM-12.1 - https://drive.google.com/folderview?id=0B_xUvmlw0WlSeHk1YmltS0VoVGc&usp=sharing
Changelog:
CM-13.0 - Here
CM-12.1 - I supply the up to date changlog in the GDrive share.
XDA:DevDB Information
Unofficial Temasek Builds cm13/12.1, ROM for the Samsung Galaxy S 4
Contributors
trader418, Temasek made this possible.
Source Code: https://github.com/temasek
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: Temasek Unofficial cm 13/12.1
Version Information
Status: Testing
Created 2016-03-20
Last Updated 2016-06-25
About to upload a test build for cm-12.1 and cm-13.0 will post back here when uploaded
edit: cm12.1 test build uploaded here https://drive.google.com/folderview?id=0B_xUvmlw0WlSeHk1YmltS0VoVGc&usp=sharing
cm13.0 build failed. Not sure whats up with that. I will take a look over the next few days and see if I can get it building again.
What I want to know for the cm12.1 test build:
1. Obviously does it boot
2. if you flash arters kernel with the test build does it bootloop?
amazing thanks, it boots and work perfectly with arter kernel 9
bauita said:
Amazing thanks it boots with arter kernel 9
Click to expand...
Click to collapse
Great, glad to hear it.
with philz/arter recovery i can´t install the rom, error 7 = this rom ist for ks01lte you device ist ks01ltesk
with twrp no problems
will be uploading another cm-12.1 test build later on tonight. cm13 is delayed because of build errors.
Here Temasek successfully booted and kernel v19 arter97
new test 12.1 build uploaded here: https://drive.google.com/folderview?id=0B_xUvmlw0WlSeHk1YmltS0VoVGc&usp=sharing
I need to know if this build boots and if it supports arters kernel. Thank you to everyone testing these builds, you're helping hugely. if this build boots and you guys can flash arters kernel and it boot still then this should be the start of a more stable release and it should be easier for me to build updates for you.
deleted
Bug report
First of all, I wants to change my network mode to WCDMA Only for WCDMA Preferred...
There's several choice which I can use at preferred network
situaiton : When I change network type to 3G at setting it does not apply at all. So I tried to change preferred network mode at ##4636##....
But I only can use GSM only, LTE only, and LTE/GSM auto (PRL)...Default is LTE/GSM auto(PRL)
Whenever I change it to something else I come backs to LTE/GSM auto (PRL) and cellinfo always remains at CellinfoLte..It should change to CellinfoWCDMA when I change to WCDMA only but I never changes
P.S.1. I have tried everything I could do...I have done such as build.prop edit, change APN,,etc..BUT NOTHING HELPED...So I found out it was problem of CM13.
P.S.2 : At cm12.1, everything works fine
hello, tested the test and remains in the logo of cyano and arter97 kernel or boot logo
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
the logo does not rise
Okay I think I have sorted the problem with booting once and for all on cm-12.1 builds, will build and upload another test build later today.
Cm-13???
nick more said:
Cm-13???
Click to expand...
Click to collapse
Still working on it
God luck
bauita said:
the new test build doesn´t boot stuck again at the samsung logo same v19 from 18.03.2016
Click to expand...
Click to collapse
Should be fixed in next release.
Going to upload a cm 12.1 build that should boot with the kernel that comes with it and arters if you flash it in about 30 mins
trader418 said:
Going to upload a cm 12.1 build that should boot with the kernel that comes with it and arters if you flash it in about 30 mins
Click to expand...
Click to collapse
Is there some chnages to the first test build (functioning with arter kernel) ?
bauita said:
Is there some chnages to the first test build (functioning with arter kernel) ?
Click to expand...
Click to collapse
Yes, the cm 12.1 rom is now being built with @kyasu 's kernel. he has given me permission and I will be giving him credit in the OP.
This thread is continuation of original RamKernel thread
This is stock permissive kernel compiled by me with UberTC, latest stock source of samsung used for building kernel for N910G/F/T.
Kernel Special Features:
1. Latest kernel source used N910FXXS1DPK3
2. Linaro 6.1 toolchain used for compiling
3. Kernel updated to linux 3.10.60 to linux 3.10.81
4. Kcal colour calibration feature added
5. Enable last_kmsg for kernel debugging
6. Very stable, good speed, good battery, keeps device cool
Please check main thread for latest build
Henceforth latest builds will be posted in main thread, as this thread was made for informing presence of the kernel
XDA:DevDB Information
RamKernel, Kernel for the Verizon Samsung Galaxy Note 4
Contributors
Ram121
Source Code: https://github.com/Ram121/RamKernel_N4
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2
Created 2016-11-01
Last Updated 2016-11-02
Reserved
Thank you!
Sent from my SM-G935V using Tapatalk
You rock thanks !!!!!
Ok lemme ask this does this fix brightness issue ???
Very good kernel no lag keep the good work
Sent from my Samsung Galaxy Note 4 using XDA Labs
Could someone tell me what the difference is between the 2 versions? They both say Super su. Thanks
dhplap said:
Could someone tell me what the difference is between the 2 versions? They both say Super su. Thanks
Click to expand...
Click to collapse
One is for N7 port the other is for stock
mexigga said:
One is for N7 port the other is for stock
Click to expand...
Click to collapse
Great, thanks. That's what I figured but wanted to make sure. I appreciate the response.
New test version for N910G here
http://forum.xda-developers.com/showpost.php?p=69626434&postcount=137
RamKernel updated to V3 for all supported models. Please check main thread for latest build
Henceforth latest builds will be posted in main thread, as this thread was made for informing presence of the kernel
Hey guys! My old post is now outdated as I got a custom rom! I would like to get a new kernel for my I9305. The kernels I know don't work are:
TGP Kernel
Boeffla Kernel
AGNi PureStock
I currently have a Lineage kernel that's included with RR but I am looking for the best kernel you can get.
-TweakTech06