I tried the repartition method manually and did all the steps carefully without doing it wrong everything was right until i tried to reboot i get a error node not found
i can reboot my phone to recovery and fastboot but whenever i try to flash a rom i get a error during the process saying failed to mount the system1 at system!
btw i have cwm r11
please help i need my phone to work again
quick help would be highly appreciated
thanks
guys should i use the mi flashtool and flash the fastboot stock rom ?
The miflash only works with the original partitions. Try to change the partitions to original and late try use the fast boot. If you cant acces to the storage, use adb to push your zip.
This tutorial can help you:
http://forum.xda-developers.com/showthread.php?t=1667929
thats the problem i cant flash any roms on the phone whenever i try to there is an error in the middle of the process saying cant mount system and mounting system error
and can i not use the miflash right away cause the main problem here is my system partition not working properly
thank you so much guys i solved the problem if anyone finds himself in this situation contact me through pm i would help you
Guys. I installed mm miui beta. after I want go back miui kk. and I flashed stock partition with cwm. now I cant flash any zip with twrp, cwm or orj miui recovery. I cant flash fastboot rom. I can only flash recovery with fast boot. in twrp menu internal stroge looking 0 mb. SDcard working but recovery cant flash any zip bec. internal stroge looking 0 mb. And I cant flash rom with adb.
mi flash error: 0x80004005:FAILED (remote: partition table doesnt exist ) Im very sad guys. I love my phone pls help me. with out battery cant give me 9008 port. I cant try testpoints.
Sorry for my bad lang. Who can help me?
in my partition table cant see rm 25 and 26
my partition table = i.imgur.com/XxyPuVA.png
I solved my problem with qpst guys. dont need thread thanks. firstly ı removed partition table with adb. after my pc connected with port10. with qpts ı write blocks. and install with mi flash my offical rom
en.miui.com/thread-138246-1-1
use http and html in end and . wherever necessary cant post link
There is a solution to unbrick using miflash here http://en.miui.com/thread-59891-1-1.html
Flash partition first then try I'm even faced the problem
Flash partition first then try I'm even faced the problem after upgrading to mm
Try to flash partition ill post u the link in next reply
---------- Post added at 04:02 AM ---------- Previous post was at 03:26 AM ----------
This guide is for you
What you will need:*
1. USB cable is of decent quality (not the one on which the connection is lost at the slightest movement)*
2. Windows
3. The device defined somehow Device Manager*
4. The latest version of*MiFlash*
5. MIUI firmware developer for fastboot*here
6. Adb and fastboot installer*here
Connect your phone in fastboot mode*
Enter this
Fastboot flash partition gpt_both0.bin
This file is in fastboot rom.*
This will restore stock partitions, then flash all the kitkat rom.
"Fastboot flash partition gpt_both0.bin"
Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure.
Note:
1. This will erase all your data and internal storage so better you backup them first.
2. I'm not responsible if anything goes wrong with your device.
Requirement:
1. Minimal ADB and Fastboot
2. Fastboot rom
3. Mi Pc Suite (for drivers, you can skip if already installed drivers)
Preparing:
1. Install Mi Pc Suite.
2. Install Minimal ADB and Fastboot.
3. Extract fastboot rom anywhere.
4. Copy all the files from images folder to the directory where Minimal ADB And fastboot is installed.
for example C:\Program Files (x86)\Minimal ADB and Fastboot
Procedure:
1. Connect your phone to pc in fastboot mode,
your Pc will install some drivers automatically.
2. Go to Minimal ADB and Fastboot directory .
3. Hold shift and right click.
4. Click open command window here.
5. Enter fastboot devices command.
If you see your device name in list of devices attached in command window then your good to go.
6. Now enter the following commands given below one by one in sequence.
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash hyp hyp.mbn
fastboot flash tzbak tz.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot erase boot
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash sec sec.dat
fastboot flash splash splash.img
fastboot reboot
Or
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
did you place all the files in minimal adb and fastboot folder?
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
did you place all the files in minimal adb and fastboot folder? And what you mean by using several different rom package? This method is only for fastboot rom made for redmi 2 only. Make sure your phone is detected by PC in fastboot mode with command fastboot devices.
I have tested this method three times without any errors. You are surely doing something wrong.
screenshot
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.
rkmadotra said:
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.
Click to expand...
Click to collapse
i have a similar problem :
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>fastboot.exe flash partition gpt_backup0.bin
target reported max download size of 268435456 bytes
sending 'partition' (16 KB)...
OKAY [ 0.005s]
writing 'partition'...
FAILED (remote: failed to write partition)
finished. total time: 0.018s
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>
Click to expand...
Click to collapse
I have a 2014813 , was using a moded 2014811 rom on it. Kept crashing wanted to reflash , and installed TWRP on it , that said can't mount partitions and now i can't flash neider the 811 or the 813 roms to it . Just keeps saying error writing to partition . I can attach a screenshot of the Miflash tool if it helps. And above is the Command prompt error.
Pushing just 5 img files didn't worked for me and was stuck on MI logo, but pushing all files was reviving my phone!
Thank you very much for this method!
sir, my Redmi 2 is bricked
when I am trying to flash this the error messages is coming like
cannot load " gpt_both0.bin".
like these and so on. when I am using flash all.bat same messages is coming and then after erasing boot the phone reboots with black screen .
sir please help me
your help will be highly appriciated.
[email protected]
My phone stucks on Mi logo what will do
yeah!!!!!!!!!!!! after trying many other methods like recovery through adb ,command prompt,mi flash tool,mi pc suit...... i downloaded atleast 4-5 roms to just confirm that whether flash tool has some problem or the ROMs..........but if something worked after constantly trying many things in past three days it is this method.......seriously...
FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI
Yes! It worked for me as well.
Thanks for your steps.
(FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI )
and it worked good.
My Mi Account was locked and could not connect to internet at all.
I had tried using Flash tools, PC suite - Flash methods and nothing worked. I had spend more time to fix my mobile in all these ways.
But this method is awesome. Only took around 15 minutes to completely flash my mobile.
After flashing the mobile, I am able to connect to internet and I have also created a new Mi-Account and linked my G-Mail account to it.
Am super happy now.
Thanks a lot.
However I would wish to add another details to the above setps:
The Flashall.BAT too needs to be extracted and copied into the same folder where the contents from ROM's Image folder were copied.
awesome bro thankyou very much.it's working absolutely well:good::good:
Tried a similar method and got my redmi2 prime hard bricked. Can someone tell me the test points in the device 2014818?
Thanx This works for me. successfull to flash my redme 2
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks[/QUOTE]
Will this work for Redmi note 3 Snapdragon??
Hello
I am stick in bootloop with my Redmi 3 (after trying Flashify).
Tried the above method with high hopes, as I have been trying everything else also with no luck.
I have downloaded a ROM for my device of course.
It all seems to go well until I launch the Flash_All.bat
Then the DOS commands are executed in 5 to 10 secs, and my devices reboot, but in a bootloop again
I got a breif view at the DOS commands, and it basically, at several lines says somthing, like: "failed to write, device is locked"
see attached sreen shot
does this mean my problem has no solution and I can simply throw away my device?
Thanks
rkmadotra said:
Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure...
Click to expand...
Click to collapse
You solved my problem :good:
Thank you buddy..... This method works
Fastbooting method did not bring back my stock model number that is hm2014818. It changed to 2014817 when i flashed miui 8 64bit rom for redmi 2. Now i am not able to go back to my original model number even by fastboot method. Any help please??
will the flash all.bat support on other mi device's??
stuck at erasing user data
flashing stuck at flashing userdata
My smartphone was running on Android 9 pie. I am saying "was running" beacuse i am in a trouble now... I flashed a custom recovery(TWRP) and I installed a custom rom (LingeaOS) without wipping storage... from that time TWRP shows that "No os installed" .. It restart again and again but without starting android..Whenever I tried to restore my backuped stock rom It shows an error message"Failed to mount /system".. then I flashed another custom recovery(CWM).. And now it restart again and again I've tried to rebboot it in custom recovery mood but I 've failed... Is my Smartphone is bricked?? Is there any way to solve this problem??
This is how to fix it
Naim178 said:
My smartphone was running on Android 9 pie. I am saying "was running" beacuse i am in a trouble now... I flashed a custom recovery(TWRP) and I installed a custom rom (LingeaOS) without wipping storage... from that time TWRP shows that "No os installed" .. It restart again and again but without starting android..Whenever I tried to restore my backuped stock rom It shows an error message"Failed to mount /system".. then I flashed another custom recovery(CWM).. And now it restart again and again I've tried to rebboot it in custom recovery mood but I 've failed... Is my Smartphone is bricked?? Is there any way to solve this problem??
Click to expand...
Click to collapse
Yes, this is called a soft brick.
You can solve the problem by doing the following:
-Your bootloader should be unlocked, and I think you've already unlocked it since you were trying to flash a custom ROM.
-You need to have a STOCK ROM of your exact phone model, this is different from TWRP backup, search google for your phone model's stock rom and download.
-You should have Fastboot and ADB installed on your pc.
-boot to fastboot mode (volume up+power, then navigate to fastboot mode).
-connect your phone to pc with USB cable
-open the folder where you have downloaded the minimal adb and fastboot, and open cmd window there with right lick or click cmd-here.exe
-now type fastboot devices, and there should be an alphanumeric code. This means your device is connected. If it is not showing up, try downloading 'minimal adb and fastboot tool' and clicking cmd-here.exe.
-In the stock rom file, there will be a file called 'firmware', and inside it there should be these files: 'system.img' 'recovery.img' 'cache.img' 'userdata.img' 'boot.img'
-Copy all 5 of these, then go to the folder where you have adb and fastboot, go inside that folder( to the place where you have all the adb and fastboot files like adbWinApi.dll). Now paste the 5 files here.
-open cmd window again, and type the following:
1) fastboot erase boot
2) fastboot flash boot boot.img
3)fastboot erase system
4)fastboot flash system system.img
5)fastboot erase recovery
6)fastboot flash recovery recovery.img
7)fastboot erase cache
8)fastboot flash cache cache.img
9)fastboot erase userdata (this may be called data, if fastboot shows an error message, type data instead)
10)fastboot flash userdata userdata.img
and you are done, this should enable you to restore your phone.
If you are unable to access your bootloader, try flashing your stock ROM with SP Flash tool (if you have a mediatek device). You have to have your stock ROM downloaded on your pc. Connect phone to pc via usb, open SP Flash tool, select your firmware file in the topmost box, and in the box beneath that, select the file ending in scatter.txt from your firmware file. Uncheck 'preloader' if it shows up on your screen, then click 'download'. Do not disconnect your phone during the process. When it is finished, there will be a green tick, and you should be able to restart your device.
Hello, I have an error on my phone:
Can you help me
Okay I managed to make it work you just have to download the rom in fastboot (the one that is 4GB) and you had to extract it once extracted you have to go in the folder specify: "angelica_global_images_V12.0.21.0.QCRMIXM_20220307.0000.00_10.0_global" according to the phone you have and then you open the folder then you run it: "flash_all.bat" (you have to have your phone in fastboot or bootloader
Flash with sp flash tool