Database Develop

[6.0.4.6] [CWM Touch Recovery] [mako]

[6.0.4.6 [CWM Touch Recovery] [mako]
Click to expand...
Click to collapse
Build with Recovery builder (Touch version)
Android_bootable_recovery / Commit History :https://github.com/CyanogenMod/android_bootable_recovery/commits/cm-11.0
1.) flashable zip file for recovery (-> put zip file to sd-card, boot to recovery, select "install zip from sd card") - Yes, you can install that with an older recovery, just flash over
2.) if you like to use fastboot : extract "recovery.img" from zip & fastboot flash recovery recovery.img
Click to expand...
Click to collapse

Was wondering if someone would make one, good until Koush releases an official one. Thanks

THX ! Great Job !

Great! thanks!!
Working great for now..

Thanks for packaging this up mate, pretty sure it was already built though

CWM 6.0.2.3 is a touch recovery so whats different about this?

New build with the latest CWM code

Re: [6.0.3.0] [CWM Touch Recovery] [mako]
Is this a stable release or beta?
Sent from my Nexus 4 using xda app-developers app

Ace42 said:
Is this a stable release or beta?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Recovery Builder builds at http://jenkins.cyanogenmod.com/ and syncs with CyanogenMod Github, so i guess it´s kinda official...
here´s some better changelog : https://github.com/CyanogenMod/android_bootable_recovery/commits/cm-10.1

Could you perhaps make a flashable zip for the Nexus 7 of the latest CWM recovery? You don't have to by any means, but it would be nice...

MikeRL100 said:
Could you perhaps make a flashable zip for the Nexus 7 of the latest CWM recovery? You don't have to by any means, but it would be nice...
Click to expand...
Click to collapse
Recovery builder is offline right now, but i can give it a go later...
which nexus 7 do you have, i think there are 2 (grouper & tilapia ??)
edit : i have recovery for grouper now, tilapia won´t build successfully; if you like it, pm me, i can send you

Re: [6.0.3.0] [CWM Touch Recovery] [mako]
Thanks a lot! Flashed, works fine!
man sent this using xda & n4

Re: [6.0.3.0] [CWM Touch Recovery] [mako]
Is adb sideload working with this version?
Thanks and best regards.

Bump version to 6.0.3.1

Is there a changelog?
NEXUS⁴

casonswag said:
Is there a changelog?
NEXUS⁴
Click to expand...
Click to collapse
Android_bootable_recovery / Commit History :https://github.com/CyanogenMod/android_bootable_recovery/commits/cm-10.1

The official CWM recovery for n4 has been upgraded to 6.0.3.1 as well:
http://www.clockworkmod.com/rommanager

I have an older version of CWM. Can I flash the newer version using the old version Cwm?
Sent from Mako

Use fastboot to flash the new version when in bootloader

Any other method? Can I just flash this using CWM? I don't have laptop with me now
EddyOS said:
Use fastboot to flash the new version when in bootloader
Click to expand...
Click to collapse
Sent from Mako

[RECOVERY] CWM-based recovery v6.0.4.7 (NewBL)

Hello, my friends!
i just built an updated version of CWM of the sources of cm-11.0 for myself, so i thought it might be nice to share it with you guys.
Please note that this is not fully tested yet and that it's for our new bootloader only!
Installation: The zip is a flashable zip like a rom, just flash it with your current recovery like you know it from tonyp's twrp builds.
Download:
http://dl.bangl.de/?dir=android/cwm p990
Changes since 6.0.2.x:
follows the new mounting principle introduced with the fstab/fsmgr/vold changes since cm-10.2, including its own mini-vold
selinux support. (not affecting us)
support for the new updater-script commands "set_metadata" and "set_metadata_recursive"
support for certificates using SHA-256
new function: quick install from last install path
fixed secure adb
and a bunch of other fixes.

A long wanted update, tnx a lot

Sorry for OT see your signature about your own build CM11 could you please share for test.Thanks.

That's a good news, currently downloading and I will give it a try Thank you.

k101d said:
Sorry for OT see your signature about your own build CM11 could you please share for test.Thanks.
Click to expand...
Click to collapse
i'm already planning to release it, and i will when it's ready. don't worry.

What does it change?
Sent from my ME173X using xda app-developers app

MisjudgedTwat said:
i'm already planning to release it, and i will when it's ready. don't worry.
Click to expand...
Click to collapse
Wow great to see you work back on the 2x. Thanks. :thumbup:
Sent from my LG-P990 using Tapatalk

cricetus said:
What does it change?
Sent from my ME173X using xda app-developers app
Click to expand...
Click to collapse
follows the new mounting principle introduced with the fstab/fsmgr/vold changes since cm-10.2, including its own mini-vold
selinux support. (not affecting us)
support for the new updater-script commands "set_metadata" and "set_metadata_recursive"
support for certificates using SHA-256
new function: quick install from last install path
fixed secure adb
and a bunch of other fixes.

I'm on cwm 6.0.2 with cm11. Can I flash it without any wipe?
Sent from my LG-P990 using XDA Premium 4 mobile app

bentcissé said:
I'm on cwm 6.0.2 with cm11. Can I flash it without any wipe?
Sent from my LG-P990 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yep... recoveries are independent of cache / dalvik-cache / installed rom.

Good work ! :cyclops:

feav cam error
hello guys, When I try to flash the LG cam feav v3 I get an error in recovery. how should I do to rolla back 6.0.2 recovery? thanks in advance

bentcissé said:
hello guys, When I try to flash the LG cam feav v3 I get an error in recovery. how should I do to rolla back 6.0.2 recovery? thanks in advance
Click to expand...
Click to collapse
you could flash it via the AIO-Toolkit. theres an option to just flash the recovery without touching other partitions.

All my 10.2 ROMS can't be installed under 6.0.4.7 recovery. Only CM11 can be installed.

MisjudgedTwat said:
Hello, my friends!
i just built an updated version of CWM of the sources of cm-11.0 for myself, so i thought it might be nice to share it with you guys.
Please note that this is not fully tested yet and that it's for our new bootloader only!
Installation: The zip is a flashable zip like a rom, just flash it with your current recovery like you know it from tonyp's twrp builds.
Download:
http://dl.bangl.de/?dir=android/cwm p990
Changes since 6.0.2.x:
follows the new mounting principle introduced with the fstab/fsmgr/vold changes since cm-10.2, including its own mini-vold
selinux support. (not affecting us)
support for the new updater-script commands "set_metadata" and "set_metadata_recursive"
support for certificates using SHA-256
new function: quick install from last install path
fixed secure adb
and a bunch of other fixes.
Click to expand...
Click to collapse
I want to install CWM in my karbonn A99 is it possible ..i have tried many CWM but was not successful...do u know the official CWM for karbonn A99

kshashank said:
I want to install CWM in my karbonn A99 is it possible ..i have tried many CWM but was not successful...do u know the official CWM for karbonn A99
Click to expand...
Click to collapse
Hi! You can't install CWM For LG P990, you need to change from source code the bootloader with your phone.
It use an MTK6572, so see this post and try to ask here if someone has built a CWM for your phone
http://forum.xda-developers.com/showthread.php?t=2469098
Show also this website

[ROM][I9300][4.3-NA7][11/03/2014]BZS-I9300.JB4.3-v1.1

Note: You are installing this software at your own risk.
Installation:
1. Use from CWM (I use CWM 6.0.4.4 Touch GT-I9300)
2. Backup your important data
3. Wipe: data, cache, dalvik-cache
4. Flash update*.zip
6. The first boot after restart
Download:BZS-I9300.JB4.3-v1.1 [11/03/2014]
Changelog - post #2
Screenshots:

Changelog
V1.0:Download:BZS-I9300.JB4.3-v1.0 [25/02/2014]
- Based on the latest official Android 4.3 Samsung Firmware I9300XXUGNA7
- With boeffla-5.2-beta4 Kernel
- Deodexed
- Zipaligned
- Busybox
- Rooted (SuperSU 1.93)
- Extended 4-way Reboot
- All Apps MultiWindow
- Modded TW Launcher 4x6
- Note 3 Keyboard
- Disabled Boot Sound
- Camera shutter sound on-off
- Build.prop Tweaks
- Note3MyFiles
- Bloatware applications removed
V1.1:
- With boeffla-5.2-beta6 Kernel
- Add new Accuweather
- New Launcher
- Add FasterGPS
- Remove Extended 4-way Reboot, add rebootmenuwidget
- Add USBMassStorageEnabler
- Add WinRAR
- Add XposedInstaller
- Custom bootanimation
- New sounds
- New settings menu-BlockCallMsg
- Add call recording
- Update google play
- Further bloatware applications removed

Looks nice and promising :good:

Sorry, BZS-I9300.JB4.3-v1.0.zip is error. Not installed!

dotanhai said:
Sorry, BZS-I9300.JB4.3-v1.0.zip is error. Not installed!
Click to expand...
Click to collapse
Which CWM are using? Try the 6.0.4.4.

bzs173 said:
Which CWM are using? Try the 6.0.4.4.
Click to expand...
Click to collapse
PhilZ Touch 6 Clockworkmod v6.0.4.7

dotanhai said:
PhilZ Touch 6 Clockworkmod v6.0.4.7
Click to expand...
Click to collapse
CWM 6.0.4.4 Touch GT-I9300. Will it work.
CWM 6.0.4.4 Touch GT-I9300.zip

My filez missing
Sent from my GT-I9300 using xda app-developers app

dratif said:
My filez missing
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
My files not missing. Otherwise I don't understand.

Its very nice enjoy new ROMs. Congrats and good luck
Sent from my GT-I9300 using xda app-developers app

bzs173 said:
My files not missing. Otherwise I don't understand.
Click to expand...
Click to collapse
MD5 checksum of BZS-I9300.JB4.3-v1.0.zip?

update v1.1

bzs173 said:
update v1.1
Click to expand...
Click to collapse
Yes. I will try it.

missing email???

[RECOVERY][5.1.1]Canibal Open touch recovery_sprout Android one

[RECOVERY][5.1.1]Canibal Open touch recovery_sprout
Android one
Requirements:
• Any Android One device_Lollipop
• already installed a custom recovery
Download :
https://www.4shared.com/zip/ygrJ4XIhba/COT_213-Recovery_Android_one.html
Step:
• Install via cwm / twrp
• Select the reboot recovery
• done
I just ported Guys, if you want to show your appreciations for the developers, here they are" @carliv @Sblood86 @drewwalton19216801 @thenameisnigel
• XDA_Developer
Note: In the install menu, do not select /sdcard because we don't have internal storage which is meant for anything other than installing apps. We only have external sd which is /external_sd which you have to select. This applies for backup and restore and every other operation involving the sdcard
Sent from my MITO_A10 using XDA Premium 4 mobile app

thanks for your hardwork mister cheers

ultrarain said:
thanks for your hardwork mister cheers
Click to expand...
Click to collapse
thank you for giving me the spirit sir ...

Recovery with treble support

No useless talks, here is the TWRP 3.2.1 based recovery compiled on Omnirom Oreo tree. It support proper /vendor connection and ability to flash vendor sparse images from the GUI. Enjoy
https://www.androidfilehost.com/?fid=5862345805528057800
28.7.2018 Update:
- Updated to 3.2.3 (Now we're faster than official release xd)
- Added ability to backup vendor/system images from GUI
https://www.androidfilehost.com/?fid=5862345805528059847
28.8.2018 Update:
- Merge AOSP android-9.0.0_r3
https://www.androidfilehost.com/?fid=1322778262903992655

able to flash DP4 GSI??

crazySID said:
able to flash DP4 GSI??
Click to expand...
Click to collapse
Ofc, if you get 255 error then use some better software to extract that system image from that zip. For example total commander (app on play store).

crazySID said:
able to flash DP4 GSI?
Click to expand...
Click to collapse
crazySID you are crazy

amog787 said:
crazySID you are crazy
Click to expand...
Click to collapse
aww! thanks ?

ATG Droid said:
Ofc, if you get 255 error then use some better software to extract that system image from that zip. For example total commander (app on play store).
Click to expand...
Click to collapse
Lovely finally found a user who uses totalcmd isn't it great?

ATG Droid said:
Ofc, if you get 255 error then use some better software to extract that system image from that zip. For example total commander (app on play store).
Click to expand...
Click to collapse
Did you booted dp4 in kenzo

Androbots said:
Lovely finally found a user who uses totalcmd isn't it great?
Click to expand...
Click to collapse
I do use it to mount my ntfs external hdd... ???

did DP4 booted in Kenzo?

anik.debnath said:
did DP4 booted in Kenzo?
Click to expand...
Click to collapse
no , it will take time , wait

Can't wait to have P

- Updated to 3.2.3 (Now we're faster than official release xd)
- Added ability to backup vendor/system images from GUI
https://www.androidfilehost.com/?fid=5862345805528059847

ATG Droid said:
- Updated to 3.2.3 (Now we're faster than official release xd)
- Added ability to backup vendor/system images from GUI
https://www.androidfilehost.com/?fid=5862345805528059847
Click to expand...
Click to collapse
Does it have password feature ??

irfankamal said:
Does it have password feature ??
Click to expand...
Click to collapse
Nah, only redwolf and recoveries which kanged it from it support that

irfankamal said:
Does it have password feature ??
Click to expand...
Click to collapse
no it is pure twrp, ability to flash gsi

nice work bro . for treble we should honor alex and all devs for there work . well thanks for redwolf its the best i have ever used .

gamerlucky said:
nice work bro . for treble we should honor alex and all devs for there work . well thanks for redwolf its the best i have ever used .
Click to expand...
Click to collapse
Since i'm contributing on this section of development for almost 2 years, this is actually just a few seconds of work for me.. Except the compilation. But thanks

ATG Droid said:
No useless talks, here is the TWRP 3.2.1 based recovery compiled on Omnirom Oreo tree. It support proper /vendor connection and ability to flash vendor sparse images from the GUI. Enjoy
https://www.androidfilehost.com/?fid=5862345805528057800
28.7.2018 Update:
- Updated to 3.2.3 (Now we're faster than official release xd)
- Added ability to backup vendor/system images from GUI
https://www.androidfilehost.com/?fid=5862345805528059847
Click to expand...
Click to collapse
Hi sir a quick question do we need lazy flasher with this recovery or it supports not enabling dm-verity just like redwolf recovery.

deep_august said:
Hi sir a quick question do we need lazy flasher with this recovery or it supports not enabling dm-verity just like redwolf recovery.
Click to expand...
Click to collapse
No, this is pure TWRP build without any modifications.. So it's like official TWRP, just compiled by me.

ATG Droid said:
No, this is pure TWRP build without any modifications.. So it's like official TWRP, just compiled by me.
Click to expand...
Click to collapse
So we need lazy flasher?