hi guys....i've downloaded the last kernel sources of franciscofranco 2.35.10 kernel....i've added the sippolo's workaround and then increase the HZ value of the kernel(set at 500) for my custom rom.....after i've done
Code:
make thunderg-perf_defconfig
make zImage -j4
it stuck at this error
Code:
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_ioctl_down’:
drivers/input/touchscreen/mcs6000_ts.c:430:6: error: implicit declaration of function ‘gpio_configure’
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_probe’:
drivers/input/touchscreen/mcs6000_ts.c:733:25: warning: unused variable ‘hw_ver’
drivers/input/touchscreen/mcs6000_ts.c:733:17: warning: unused variable ‘fw_ver’
make[3]: *** [drivers/input/touchscreen/mcs6000_ts.o] Errore 1
i don't understand why......i think it is a lib problem.....but seems that all libraries are imported!!!can anyone help me??? thnx in advice
Which toolchain?
Sent from my LG-P500 using XDA Premium App
lupohirp said:
hi guys....i've downloaded the last kernel sources of franciscofranco 2.35.10 kernel....i've added the sippolo's workaround and then increase the HZ value of the kernel(set at 500) for my custom rom.....after i've done
Code:
make thunderg-perf_defconfig
make zImage -j4
it stuck at this error
Code:
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_ioctl_down’:
drivers/input/touchscreen/mcs6000_ts.c:430:6: error: implicit declaration of function ‘gpio_configure’
drivers/input/touchscreen/mcs6000_ts.c: In function ‘mcs6000_ts_probe’:
drivers/input/touchscreen/mcs6000_ts.c:733:25: warning: unused variable ‘hw_ver’
drivers/input/touchscreen/mcs6000_ts.c:733:17: warning: unused variable ‘fw_ver’
make[3]: *** [drivers/input/touchscreen/mcs6000_ts.o] Errore 1
i don't understand why......i think it is a lib problem.....but seems that all libraries are imported!!!can anyone help me??? thnx in advice
Click to expand...
Click to collapse
.35 kernel have new GPIO library, you should code sippolo's workaround into new driver, do not replace whole file.
mik_os said:
.35 kernel have new GPIO library, you should code sippolo's workaround into new driver, do not replace whole file.
Click to expand...
Click to collapse
Aaaaa i don't know that thanks now it works ;-) now the next step i'm ttying to port the acer liquid multitouch fix thanks mik
Sent from my LG-P500 using XDA App
If you can fix also the tethering and the random bugs
use pdanet for tethering
now i'm stucking at this error...((
arch/arm/mm/built-in.o: In function `__flush_icache_all':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/arch/arm/include/asm/cacheflush.h:402: undefined reference to `swapper_space'
arch/arm/mm/built-in.o: In function `____atomic_set_bit':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/arch/arm/include/asm/bitops.h:46: undefined reference to `swapper_space'
arch/arm/mm/built-in.o: In function `spin_unlock':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/include/linux/spinlock.h:324: undefined reference to `swapper_space'
mm/built-in.o: In function `sync_page':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/mm/filemap.c:190: undefined reference to `swapper_space'
mm/built-in.o: In function `set_page_dirty':
/home/pasquale/Scrivania/Franco.Kernel/2.6.35/mm/page-writeback.c:1181: undefined reference to `swapper_space'
mm/built-in.o:/home/pasquale/Scrivania/Franco.Kernel/2.6.35/mm/page-writeback.c:1335: more undefined references to `swapper_space' follow
make: *** [.tmp_vmlinux1] Errore 1
Click to expand...
Click to collapse
seems another time a library problem... anyone can help me??
lupohirp said:
now i'm stucking at this error...((
seems another time a library problem... anyone can help me??
Click to expand...
Click to collapse
What have you patched?
It just says it's missing the swapper_space function header, it's not defined.
franciscofranco said:
What have you patched?
Click to expand...
Click to collapse
nothing franco....i've only added sippolo's workaround for base to port acer liquid multitouch fix and set kernel to 500hz i've worked only on mcs6000_ts......but it stuck at this error i don't know why!!! i think it is a library problem....something that is missing...but i don't know what are the libraries that i must install if it is this the problem!(
You downloaded the latest sources? Because I haven't compiled it, I just merged the patches, I might have forgot to apply something. In this case it says it misses the swapper_space reference.
http://lxr.free-electrons.com/source/mm/swap_state.c#L40
http://lxr.free-electrons.com/source/include/linux/mm.h#L771
http://lxr.free-electrons.com/source/include/linux/swap.h#L319
Add the swapper_space code to those files and compile again.
franciscofranco said:
You downloaded the latest sources? Because I haven't compiled it, I just merged the patches, I might have forgot to apply something. In this case it says it misses the swapper_space reference.
http://lxr.free-electrons.com/source/mm/swap_state.c#L40
http://lxr.free-electrons.com/source/include/linux/mm.h#L771
http://lxr.free-electrons.com/source/include/linux/swap.h#L319
Add the swapper_space code to those files and compile again.
Click to expand...
Click to collapse
yes franco i've downloaded latest sources! thanks now i'm going to add it and then try!
franco the swapper_space code that you posted is already there in the three files((
I dunno, I have to leave now, I'll look at it later.
I'm sorry to disappoint you, but there ain't a problem with the kernel, I just compiled it without any modification, just like it is in the sources and it compiles fine. Try to make clean and make distclean, then compile again.
franciscofranco said:
I'm sorry to disappoint you, but there ain't a problem with the kernel, I just compiled it without any modification, just like it is in the sources and it compiles fine. Try to make clean and make distclean, then compile again.
Click to expand...
Click to collapse
yeah franco i know.....i think it is a libraries problem on my linux distro.....but i have installe all the binutils and the header files yesterday also i have tried a dirty hack i tried to set CONFIG_SWAP=n in the thunderg_perf_defconfig configuration file....compiled succesfully but the phone doesn't started ...thanks anyway franco!
My Question to the Dev's is is there a Guide on How to Build Single APP Packages eg Calculator from Source Without building the entire android from Source is possible to build eg libjpeg from source as a single module.
i have tried the mmm command all it did was spit out errors you fix one get ten more and so on
I also tried using NDK by inserting the open source libs into a jni folder and modifying Android.mk to look similar to the sample jni resulted in errors this is the only Guide i can't find as there many on building entire android but sometime one only needs specific modules and not entire build.
If above not possible is there a bare minimum version where it only builds android core frameworks and like one lib /app ?
i did not try this .
u can download the package like if u want trebucket launcher then download full android_packages_apps_trebuckhet.
recompile it to get the trebucket apk
once againg i did not try this out
defcomg said:
My Question to the Dev's is is there a Guide on How to Build Single APP Packages eg Calculator from Source Without building the entire android from Source is possible to build eg libjpeg from source as a single module.
i have tried the mmm command all it did was spit out errors you fix one get ten more and so on
I also tried using NDK by inserting the open source libs into a jni folder and modifying Android.mk to look similar to the sample jni resulted in errors this is the only Guide i can't find as there many on building entire android but sometime one only needs specific modules and not entire build.
If above not possible is there a bare minimum version where it only builds android core frameworks and like one lib /app ?
Click to expand...
Click to collapse
Mmm won't help as it needs to link against other parts of the system. That's why you need to do a full build before you can mmm
In theory you can take the app and try to import it into eclipse, and regard it just as an app project.
Hi,
I'm really glad to see the brand-new translation site up and running well. Thanks for that~
But there's something wrong: when I perform an sync and compile, some strings are still left in English (for e.g.: settings of Messaging app are almost in English, not Chinese as I selected in Android Settings). I checked the source code, and find that there are no custom_strings.xml, custom_arrays.xml, etc under packages/apps/Mms/res/values-zh-rCN (android-4.4 branch). However, these files can be found on Crowdin.com and android-4.3 branch on GitHub.
Does that mean we should do a translation import, or Crowdin.com is using the wrong branch?
Hi,
I just started using Xposed Framework and I think it is really cool tool! For now I am just trying to learn the API and how to do the things. I am trying to change some values returned by functions by an app, but the decompiled code is obfuscated and all class names and methods are with one or two letters. For example :
Code:
if(!p.a().h() && ae1.c() > 500F){
com.bones.modes.cn.a(com.bones.modes.cl.a(b)).b().a("New message");
}
So what I need is a way to change return value of
Code:
p.a().h()
and
Code:
ae1.c()
which are located in different package than
Code:
com.bones.modes
.
Any idea how to achieve this?
Why decompile when you can compile from source or directly edit source
check repositories under this user : https://github.com/rovo89
if you find your changes could benifit others submit a change request.
anantshri said:
Why decompile when you can compile from source or directly edit source
check repositories under this user : rovo89
if you find your changes could benifit others submit a change request.
Click to expand...
Click to collapse
I decompiled application just to find class names and methods so I can inject code and make some changes, but don't know how to deal with obfuscated code and Xposed. I've tried to hook method found using dex2jar, but it's throwing an exception
Code:
NoSuchMethodError
.
hardartcore said:
Hi,
I just started using Xposed Framework and I think it is really cool tool! For now I am just trying to learn the API and how to do the things. I am trying to change some values returned by functions by an app, but the decompiled code is obfuscated and all class names and methods are with one or two letters. For example :
Code:
if(!p.a().h() && ae1.c() > 500F){
com.bones.modes.cn.a(com.bones.modes.cl.a(b)).b().a("New message");
}
So what I need is a way to change return value of
Code:
p.a().h()
and
Code:
ae1.c()
which are located in different package than
Code:
com.bones.modes
.
Any idea how to achieve this?
Click to expand...
Click to collapse
Hook the application's package (application package != Java package), then hook the class name you want using its full name (e.g. com.bones.modes.ClassName, or com.otherpackage.something.ClassName).
If that doesn't help, post the code you're trying with (and more information about the "different package").
anantshri said:
Why decompile when you can compile from source or directly edit source
check repositories under this user : https://github.com/rovo89
if you find your changes could benifit others submit a change request.
Click to expand...
Click to collapse
He's talking about something entirely different.
GermainZ said:
Hook the application's package (application package != Java package), then hook the class name you want using its full name (e.g. com.bones.modes.ClassName, or com.otherpackage.something.ClassName).
If that doesn't help, post the code you're trying with (and more information about the "different package").
He's talking about something entirely different.
Click to expand...
Click to collapse
I've already fixed it. I realise that the method which I was trying to override takes params and I wasn't pointing them in declaration of hook method.
Hello I´m trying to build an APP called zoomgesturetile from the authors GitHub. But when I want to build the APK, I get this Error:
Something wrong with the Maven Repository I guess. I never used Android Studio, so it would be nice if someone could help me out here, or may look into the code if he or she can compile it.
Thank you for your help