Related
Okay, so lots of people have problems with their bluetooth. I am too. I have a JVC KW-XR810 car stereo and the bluetooth keeps shutting down on one or the other. My questions are:
Does anyone else have this stereo and problem? If so, whats the situation?
Is there a ROM that works flawlessly (or close to) with the bluetooth?
Its odd though, that my headset works perfectly and I didn't have many problems with another stereo I've used. Makes me wonder if its the stereo or the phone. Still, many others have bluetooth problems with this phone...
Thanks for any responses.
Stock Froyo
Rooted
One click lag fix
My last 3 phones (including this one) have all worked flawlessly with my Sony MEX-BT3700 head unit. Phone calls, BT dialing, streaming music, all work perfectly.
Yep, same here - AT&T replaced my Captivate under warranty about 2 or 3 weeks ago due to the random shut-down issue. Took the new one home, installed Froyo, and rooted it. Everything works well, except lately I've been getting frequent bluetooth disconnects from my car stereo (Pioneer AVIC-X920BT).
The usual pattern seems to be it's good for about one call, and then shortly after ending that call, I notice that they are no longer connected. I usually turn off BT on the phone (seems to take a while to terminate) and then turn it back on, but it will usually only be good for a single call. It's been frustrating, and I'm leaning toward the problem being on the phone side, since that's where there have been recent changes.
Must be a problem with Stock Froyo. Glad I'm not using it.
I've had this issue with certain roms I was running. I have a Kenwood KDC-X993. So far on CM7 it stayed connected.
Sent from my SGH-I897
i have the same (or similar) problem with my OEM headunit on a VW Golf. BT randomly disconnects but my music (pandora) still plays through the BT stereo, unless I stop it. Then its completely disconnected and I'll have to reconnect the phone to the car.
annoying but I just deal with it.
I'm running Paragon 6 and have a Dual head unit. I haven't had any disconnect issues, my problem is the crappy Pandora app.
mdaudioguy said:
Yep, same here - AT&T replaced my Captivate under warranty about 2 or 3 weeks ago due to the random shut-down issue. Took the new one home, installed Froyo, and rooted it. Everything works well, except lately I've been getting frequent bluetooth disconnects from my car stereo (Pioneer AVIC-X920BT).
The usual pattern seems to be it's good for about one call, and then shortly after ending that call, I notice that they are no longer connected. I usually turn off BT on the phone (seems to take a while to terminate) and then turn it back on, but it will usually only be good for a single call. It's been frustrating, and I'm leaning toward the problem being on the phone side, since that's where there have been recent changes.
Click to expand...
Click to collapse
Same here, I have a Parrot mki system in my car, but I found a workaround that I hope works for you too:
Unpair with the device, and when you re-pair it, when it asks you to synchronize contacts, do not let it. It will bug you every time it connects, but just ignore the requests.
I haven't had a single disconnect since doing this weeks ago.
I've read about the contacts request from other users but it doesn't happen with mine. Another thing, when I lose the connection and I turn off bt one the phone out shuts off. Completely. Pushing the power button does nothing. Holding the volume up and power buttons together for a few seconds seems to restart it but theres no animation. Just the lock screen, media scanner, etc. Maybe its restarting on its own and the button pushing has nothing to do with it. Also, I listened to my bt headset for hours last night with no probs at alI. Idk. Is bt different for head units? I thought it all used the same protocals.
So it seems that its not my head unit, but the phone. Are there any good solutions for us?
Sent from my SAMSUNG-SGH-I897 using XDA App
My head unit never asks to download contacts. Could it be that some do because they store that info in order to identify and announce incoming calls? That would mean there's more going on than just a simple BT connection.
Yeah. One post I read said something about it using a data connection the hu for contacts. I have no idea what he was talking about though.
Sent from my SAMSUNG-SGH-I897 using XDA App
My head unit have the ability to sync contacts. When I first paired it, the phone asks me for permission and there's a check box to always allow.
Sent from my SGH-I897
nahrah said:
My head unit have the ability to sync contacts. When I first paired it, the phone asks me for permission and there's a check box to always allow.
Sent from my SGH-I897
Click to expand...
Click to collapse
The only purpose I can see for this is if the head unit has an integrated nav system. That would allow you to bring up a contact as a nav target independent of the phone.
Okay, gettinging back to my original questions. So far we've established that this is endemic to the captivate, mostly. There have been two replies saying that cm7 and paragon 6 have stable bt connections with head units. I read in another post that axura works as well. This is so frustrating that I'm just about willng to learn how to flash this thing.
Sent from my SAMSUNG-SGH-I897 using XDA App
NvigR8 said:
Okay, gettinging back to my original questions. So far we've established that this is endemic to the captivate, mostly.
Click to expand...
Click to collapse
We have? My first post says I have zero issues with this on my head unit with my phone on Eclair, Froyo and now Andromeda. If it is a phone issue mine is not suffering from it. Sounds more like it has something to do with head units that store contact data. Mine apparently doesn't.
Hmmm.
Yet in your second post you posited that it must be a Froyo issue.
Regardless of whether it is the phone or OS, a lot of Captivate owners seem to have bt issues of one kind or another with various devices. Maybe this is just a bt issue in general that everyone deals with (not just Captivate owners) and I'm just being sensitive because I haven't had much bt exposure.
Any help is appreciated here. I'm just looking for suggestions on what to do short of buying a new phone or head unit. It would be great if other users experiencing this problem would benefit from the discussion as well.
So far it appears that flashing a different ROM may be a solution but which one? Is there any way to change only the bt stack?
Sorry if that sounded short, but I'm REALLY frustrated with this.
My hu will store contacts as most do these days, but it doesn't ask for them. I don't think the problem is related to the contacts. I guess its just a random incompatibility thing.
I said it "might" be a problem with stock Froyo. I didn't see it the 3 days I was running it and my current ROM is Froyo-based and working without issue. The only other variable I can see is that others posting problems have reported having to deny access to contacts, something my head unit never asks for, in order to get it to work. That would appear to indicate the difference is in the head units and not the phones, but unless I could connect to one of these other head units to verify, I'm only guessing. Sorry.
i notice that if I toggle the bluetooth on my phone right before connecting it to my car, it works flawlessly
Installed a Kenwood X994 and had all kinds of issues with BT. Worked for awhile but would never auto connect. Only vehicle and area where I had BT issues. I realized it was due to the downloading of contacts at every connect. sometimes it would download than immediately disconnect. frustrating. Was on serendipity, Tried a native Cappy ROM, Cognition and now Phoenix..
The unit has the Parrot system in it so it should be ok. Finally decided to update the Firmware on the HU. So far so good. I like the contact download so I don't need to use the phone at all to make a call. Receiving calls is no problem.
Will test further tomorrow.
BTW I have a BT Garmin mounted in the truck and used it before getting the head unit. no problems connecting. The only issue with that was a delay between pressing the call button and the call being made. Hanging up was an issue as well.
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
fury683 said:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
Click to expand...
Click to collapse
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Thanks. I wasn't able to test it on 4.2.2 (it took right away OTA out of the box) with my Moto X, but it was working fine on my Droid Razr Maxx on 4.1.2 Jelly Bean before I got the Moto X.
I will have to try and see how it works with just the A2DP device without the handsfree. I rarely ever talk on the phone, and with the Touchless Controls I could call people and just pick up the phone. Or turn the phone portion back on for the A2DP device so the sound would come through my speakers but I'd still have to use the mic on my phone...
Still annoying. Thanks again for the reply.
gtg465x said:
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
Click to expand...
Click to collapse
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
I have a Dension BT gateway for my car that provides BT audio and hands free. My phone connects automatically as long is bluetooth is turned on. I also connect to a BT OBD2 adapter sometimes, and I tried it today, and I kept playing Pandora via BT and also connected to the OBD2 adapter and had data going from both of them.
fury683 said:
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
Click to expand...
Click to collapse
Yeah, but they aren't a separate connection I don't think. Pretty sure the one connection handles both.
Seems to be an issue with the A2DP device specifically. I unpaired my car and the dmzmusic device and repaired them both, same result. I added just the dmzmusic, and got the same thing.
I changed my Tasker profile to just flash a toast message to show it connecting and disconnecting instead of firing Pandora to see if that mattered and it didn't. I did not try disabling the Tasker actions entirely to see if that worked.
I have a pair of Bluetooth headphones at home that I may try as well to see if it will connect to those. They fire the same task as the dmzmusic does to launch Pandora when they connect, and kill it when they disconnect.
Hoping this gets fixed, because it's VERY annoying.
Is it possible to submit this to Google/Moto as a bug if it is a larger problem with all A2DP devices?
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
gtg465x said:
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
Click to expand...
Click to collapse
Thanks. I will try it with the Philips bluetooth headphones as well. The device in my car is pretty cheap. I don't know what version of Bluetooth it has, but it was only about $5. Anyone know of a similar device that can receive a Bluetooth audio signal and convert it to 3.5mm, and is powered by USB?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Well I sort of solved this. There's an app in the Play Store called Bluetooth Auto Connect. This can connect to bluetooth devices with a set of conditions and states, and works as a plug-in to Tasker. I told it to connect to dmzmusic upon connection to any other bluetooth device (in this case, my General Motors hands free). Worked perfectly. Thought you'd like to try it out for your dual device setup.
However, I also have a new issue. It seems the reason my phone call wasn't on bluetooth at first was due to some sort of connection issue with the General Motors unit. While driving home tonight, every few minutes my car radio said Connected. And every time I turned the car screen on to thumb up a song on Pandora, it flashed Connected to a trusted device. Which implied to me that it was disconnecting periodically. No idea why it would do this. Didn't see any setting for it in bluetooth, and battery saver isn't on.
Anyone seen something like this? Will try tomorrow without the trusted device settings to see if that matters....
I noticed a similar auto-connect issue with mine, when I was attempting to troubleshoot the stuttering A2DP issues I'm having. If I have the HFP and A2DP profiles both enabled, they both connect right up when the ignition is on. If I have the HFP profile disabled, and only A2DP enabled, it doesn't connect right away and I usually have to manually force it. Very strange. This whole BT situation on this phone has been a pretty big disappointment for me, since I had everything working great with my GNex (running 4.3) and now it's like I've lost the heart of my car audio system.
I bought the Kinovo BT dongle for my wife for Christmas, so it will be interesting to see how that works with her Moto X. I'm pretty excited about trying out the AptX encoding for lossless audio, but I doubt she will even notice the difference.
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
totempole said:
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Did you look at the auto connect app? It worked fine for me. My Bluetooth stopped working for a day or two because I froze a process without realizing what it was so BT wouldn't turn on at all. I think I have to remove and repair both of my devices to get the same setup I had on my Razr Maxx on 4.1.2,
The connecting/disconnection and/or 1-2 minute lag from my General Motors hands-free connection was annoying too. Have to see if that persists. I tried making the A2DP device the trusted one to see if that changes anything.
Really hoping this is something that Moto can/does fix, especially through a Play Store push like they've done with Active Display and the camera app.
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
640k said:
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
Click to expand...
Click to collapse
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
fury683 said:
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
Click to expand...
Click to collapse
not rooted/haven't wiped.
640k said:
not rooted/haven't wiped.
Click to expand...
Click to collapse
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
fury683 said:
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
Click to expand...
Click to collapse
could be completely device specific too. if your vehicle is BT v2.x or whatever. my tunelink specifically has problems with data/audio stream with the X that my X doesn't have problems with on other devices. could be software/hardware incompatibility issues.
FWIW, my vtech BT phone @ home would NEVER pair with other devices. i would always have to manually pair.
I just emailed Moto about this, because I'm having bugs too. I think that you're on to something, 640k. My Pioneer headunit (FH-P800BT) has BT 2.0, and while HSP connects fine, A2DP only works on the first pair, and after disconnecting once and reconnecting, it won't ever connect A2DP. I have to completely unpair the phone and re-pair it to get both A2DP and HSP working. My phone also gets stuck on "Connecting..." under BT whenever it's having issues connecting with A2DP. Here's the email I sent off to Moto"
I've noticed an issue with my new Moto X that I never had with my Samsung Galaxy Nexus. The phone itself performs way better than my older phone, but I've had a specific bluetooth problem. I have a Pioneer headunit that supports A2DP as well as HSP (music playback and headset functionality) and with my Galaxy Nexus, it worked great, I paired my phone up with the headunit, and both A2DP and HSP would pair at the same time, and work perfectly. With my Moto X, when I first pair the phone to the headunit, it pairs both profiles, but after I've disconnected (turned car off or turned bluetooth off) and come back, it only pairs HSP, and when I try to pair A2DP, my phone gets stuck on "Connecting..." under bluetooth to the headunit, and never will connect to A2DP unless I unpair and re-pair the entire phone. I've tried resetting my headunit and phone and still the same problem exists. Looks like other people are having issues with bluetooth too, as per this article on a popular Android forum > http://forum.xda-developers.com/showthread.php?t=2562186 < I'd like you all to check this out. Seems it's just on 4.4, and wasn't present on 4.2.2 (I never checked myself on 4.2.2, as I immediately upgraded to 4.4 when I got my phone. This doesn't seem to be a hardware problem, but more of a software problem. Please check into this, and don't just read this and act like it's only a problem a handful of people are having. I'd like to have this fixed, and while it's not a deal-breaker for me to use the phone, it does make me a bit frustrated. Thanks in advance!
Click to expand...
Click to collapse
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
tonyf7 said:
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
Click to expand...
Click to collapse
I've streamed it to my car and it was fine
tonyf7 said:
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
Click to expand...
Click to collapse
The only problem I have is the bluetooth in my car is always on. The phone wants to stay connected to it even when I'm in the house. Makes for a frustrating time when I'm doing work in the yard and trying to listen to something. I will plug in the headphones and after a while it will switch to the car's bluetooth.
Short of that the bluetooth connection has been stable and used a lot.
Can anyone help me..
how to connect my Samsung Galaxy tab2 with the nokia Bh-503 Bluetooth headset...
My tab won't connect the nokia Bluetooth device...
So how can i able to connect BH device in my samsung galaxy tab2 gt-p3100..??????????
Sent from my GT-P3100 using XDA Free mobile app
Blue tooth connection issue
Ok, let me be as descriptive as possible to my condition/experience.
I went for a walk today with Droid Turbo in tow, blue tooth connections to my Moto 360 (synced with Run Keeper) and Beats bluetooth earphones, playing a downloaded podcast, to avoid weak signal/streaming issues.
The sound coming thru the connected headphones was choppy, cutting in and out. Not listenable.
I thought the Moto active display were being tripped over and over again in my pocket, causing the choppiness of the bluetooth audio.
I turned off all the Moto active settings, as well as double twist to open camera app.
After turning off all those settings, it seems to play without a hitch. For the first couple of minutes. Then it would alternate between continuous playback and chopped playback, couple minute at a time, back and forth.
I am now done with that walk, sitting down typing this up and bluetooth thru Beats are working flawlessly.
It must be related to motion of the phone as I walk that causes the chopped playback, i dont have a clue.
Anyone have similar and create a setting profile that eliminates this?
Only issue with Bluetooth is with my mazda cx5, connects faster than my note 3, plays well except sometimes with play music the display won't advance to the next song but the song plays. Also sometimes the skip track won't work. Had zero issues with the note 3, hoping the next update fixes these problems. That's the problem with being an early adapter, but love the phone so far, miss having viper4android and pandora patcher, but can live without them, but keeping fingers crossed for root, although I seriously doubt this phone will get it.
Me too
tonyf7 said:
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
Click to expand...
Click to collapse
I had what sounds like the same problem. At first I thought I was getting notifications that would make the Bluetooth connection to my car cut out, but eventually realized that it was indeed garbled and sounded like a CD skipping quietly. I also had horrible battery life and touch screen issues even after a factory reset. Returned it and I'm using my GNex until my N6 shows up.
sleevester said:
I had what sounds like the same problem. At first I thought I was getting notifications that would make the Bluetooth connection to my car cut out, but eventually realized that it was indeed garbled and sounded like a CD skipping quietly. I also had horrible battery life and touch screen issues even after a factory reset. Returned it and I'm using my GNex until my N6 shows up.
Click to expand...
Click to collapse
Fortunately for me the CD skipping stopped. Seems it worked itself out for me. [emoji1]
My turbo has a terrible time staying connected to my pebble, so much so that I'm attempting to set up llama to periodically check for connectivity, and if it finds none, reset Bluetooth and attempt a reconnect.
No audio problems, but I've never tried for more than a half hour or so.
s919rider said:
Ok, let me be as descriptive as possible to my condition/experience.
I went for a walk today with Droid Turbo in tow, blue tooth connections to my Moto 360 (synced with Run Keeper) and Beats bluetooth earphones, playing a downloaded podcast, to avoid weak signal/streaming issues.
The sound coming thru the connected headphones was choppy, cutting in and out. Not listenable.
I thought the Moto active display were being tripped over and over again in my pocket, causing the choppiness of the bluetooth audio.
I turned off all the Moto active settings, as well as double twist to open camera app.
After turning off all those settings, it seems to play without a hitch. For the first couple of minutes. Then it would alternate between continuous playback and chopped playback, couple minute at a time, back and forth.
I am now done with that walk, sitting down typing this up and bluetooth thru Beats are working flawlessly.
It must be related to motion of the phone as I walk that causes the chopped playback, i dont have a clue.
Anyone have similar and create a setting profile that eliminates this?
Click to expand...
Click to collapse
I have this same stuttering problem when I use my LG TONE while everything works fine while connected to my car's radio.
jfassad said:
I have this same stuttering problem when I use my LG TONE while everything works fine while connected to my car's radio.
Click to expand...
Click to collapse
I run regularly with the Turbo in my pocket, with BT Headphones (Motorola H11), BT heart rate monitor (Polar), with Runkeeper app tracking my run and music playing from Google Play music. Works very well. Once in a while, I do get a little skipping (1-2 minutes of skipping on 1 out of every 5 runs?). I do usually turn my wifi off when I'm going for a run. I run by a few saved hotspots, and I think that the skipping is related to wifi attempting to connect to a weak hotspot.
Just curious... The ones having issues with BT connections. Are you by chance connected to Wi-Fi? I've always had issues with Bluetooth on my devices when connected to 2.4ghz WiFi. No issues with 5ghz. They're too close to the same frequency. My note 2014 can't even keep a connection to my work 2.4ghz Wi-Fi and stream over a Bluetooth connection. Drops it every time.
mlr_90 said:
Just curious... The ones having issues with BT connections. Are you by chance connected to Wi-Fi? I've always had issues with Bluetooth on my devices when connected to 2.4ghz WiFi. No issues with 5ghz. They're too close to the same frequency. My note 2014 can't even keep a connection to my work 2.4ghz Wi-Fi and stream over a Bluetooth connection. Drops it every time.
Click to expand...
Click to collapse
Yeah I'm pretty sure that's the issue here. When I first got this phone, music over my bluetooth earbuds would skip like crazy while I was walking across campus. Eventually I noticed that if I set the wifi frequency band to 5GHz only or turned it off completely, then the stuttering would stop. Likely the stuttering was from my phone trying to connect to access points as I walked through campus. So now I just have tasker set up to disable the wifi whenever I'm connected to my earbuds. Not a proper solution but it works for now. Never had a problem like this with my Galaxy S3, though. Hopefully it can be fixed in some sort of software update.
I've had what sounds like skipping, but it only happens when the phone is either connecting or disconnecting from WiFi and I am streaming music, that wasn't uncommon with previous phones though so I wouldn't consider it a Turbo issue. I stream almost every day for a total of about 1-2 hours.
Sent from my XT1254 using XDA Free mobile app
Hey I just posted my experience here http://forum.xda-developers.com/showpost.php?p=57604084&postcount=4 but I'll just copy and paste it to this thread:
Quote:
Originally Posted by Rixanu
Hmmm, I wonder if it's motion based. I'm sitting in my room listening to it now and it's a lot better. Unfortunately that doesn't really solve my problem, though.
----------------
Rixanu - I think you're on to something... I'll give my "story" and hopefully someone a little more savvy than us can help figure it out.
I switched over from the good ole Galaxy Nexus about a month ago. No major complaints on the Turbo yet as we await Lollipop, with the exception of this Bluetooth issue. I have the Bluetooth paired in the car, and a set of headphones - music and everything worked perfectly on the GNex through the Bluetooth. Now, primarily, it's often choppy (mustic anyway) - for reference, when listening to music I listen via Google Play (all access or whatever they call it now). I figured the choppiness was related to the fact that the music was being streamed since most wasn't downloaded yet, but after very limited experimenting, I believe it must have to do with the physical Bluetooth radio. I had noticed in the past that when the music streams perfectly, a lot of times if I pick it up to check an email, text, etc., it becomes choppy, but thought that was strange since the RAM should be more than sufficient to multitask without choppiness. On my way home from a friend's, I played around and stuck my hand over various parts of the back of the phone, and would press the phone against my pant, etc., and could effectively interfere completely with the connection such that it would be only silent, and not even choppy. Yet, while the music wasn't playing, the track continued to playback on the device and when the music would pick up after I moved the phone, it would be 10 seconds or whatever later as if it had been playing straight through the whole time.
I haven't tested this theory too much yet, but I think combined with your issue, there's certainly something there. Unfortunately, I frequent these parts in order to find answers to these types of issues and don't have the solutions myself.
Do we have lemons, or is this issue prevalent?
I'm happy to provide more info to anyone that can help.
Thanks in advance!
Guys user: BIOYAM
Found a fix that worked for him and for me. You can try this:
Install SetCPU (I used a free app No-frills Cpu controll) with Governor: Interactive, CPU: Max 2265MHZ & Min 652
This totally stopped my bluetooth audio issues. Of course you need to be rooted to use these tools.
Hope this helps. :good:
Just an update for all y'all... My brother has the same phone and he's sort of oblivious to these types of issues, so I didn't trust his take on whether he was having the same problem. Anyway, I tested his phone on my BT devices and his phone had no issue whatsoever, even though mine did as I flipped back and forth between a pairing of the two.
Long story short, I called Verizon who connected me through Motorola and they're shipping me a new one, though they required me to put a $500 hold on my cc until I send this POS one back.
Happy Holidays
Yes
I would be happy for suggestions. My bluetooth headphone keeps losing connection to the phone, and then reconnecting. Now, this only happens when I'm not listening, but since I tend to keep the headphones around my neck when I've paused playback I hear the reconnection beeping, it's annoying. When I resume listening the headphone may, or may not be connected.
I've made sure all the other bluetooth devices have bluetooth off, so I don't think the phones are trying to connect to something else. I read in another post that someone thought they might be having trouble because their car bluetooth was always on. I don't know if mine is, but I can tell you it's a pain to connect the phone to the car. Every time I do I need to go through several menus and, of course, this can only be done in Park, so I doubt the car is trying to take over the phone's bluetooth. :fingers-crossed:
Thanks
Since the MM upgrade, my phone has stopped connecting to my BT headphones automatically when I turn the headphones on. I have to manually connect them, by selecting them out of the list of paired devices. Is this just a change in how MM handles BT?
My issues with BT happen with both Lollipop & MM. My Turbo will randomly turn off BT and when I go to turn it back on I see the BT icon flash a couple of times quickly but it never turns back on. I found a remedy for the issues by using an app called Bluetooth Auto Connect but even with that I still have the issues now.
The phone also turns BT on by itself, even after I have manually disabled it
I'm sure the phone knows that it's going to be replaced with a Pixel and is messing with me as much as possible until then.
Any ideas?
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.
Anyone else haing issues here with bluetooth? I can connect to everything bluetooth, wireless speakers, car, headsets, watch etc. The only thing I can get to work reliably is the headset, everything else randomly cuts out or has issues. For example both cars have bluetooth for phone calls, one has bluetooth for media, I can get both to work for a short time but it either 1. Cuts out and reverts back to phone, freezes the system in the one car, or jumps back and forth between the 2. Similar results when connected to bluetooth speakers, can get it to work for about 10-15 minutes then nothing, phone shows it still connected and playing music but no sounds from speakers. LG G Watch R also randomly looses connection. I'm beginning to regret my switch from the S5.
Anyone having similar problems or a fix?? I really want to keep the phone but not sure I can deal with this flaw...........
I have no such issues with the bluetooth. I can tell you that I had bluetooth issues with one of my other android phones. I had to get it warranty replaced. My suggestion is that you get the phone replaced since its brand new.
Mine has been fine so far. I just wish that android was more like apple, as much as I hate to say that. Both my S6 and M7 will play phone audio fine when in a call, but to use maps I have to turn the radio to Bluetooth mode. Makes it kinda boring to ride with no radio just to get turn by turn nav.
Sent from my SM-G925V using XDA Free mobile app
I haven't had any issues with my smart watch (moto 360) but I have had some weird issues with my car's Kenwood media deck. The phone will connect to the unit, but 75% of the time no sound will come from the speakers on the first try. Sometimes just waiting about a minute does the trick, other times I turn BT off/on and it'll work fine the 2nd time. However because I haven't had any issues connecting with my watch, ear piece, or laptop I am willing to bet it's it an issue with the Kenwood and not the phone.
Thanks guys. Don't want to have to warranty swap it but looks like that's going to be my first step.