Related
OK Guys the e1 has been an absolute mare... to root or basically do anything with so heres a guide to finally root this thing and install a custom recovery WHOOO.......
OK FIRST THINGS FIRST... UNLOCK BOOT LOADER ABSOLUTE BEST WAY AND SAFEST WAY TO DO IT.........
Please note! It will only be possible to unlock the boot loader for certain releases. You can check if it is possible to unlock the boot loader of your device in the service menu by following the steps below:
In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Go here and check whether your smartphone is on the “unlock bootloader” list or not. If your phone is not listed there it means that you cannot use this guide for unlocking the system
.
Also, on your handset type and dial: *#*#7378423#*#*; then go to “Service info -> Configuration -> Rooting Status” and check if the “Bootloader unlock allowed” says yes. If the “no” answer will be displayed then you will not be able to unlock the bootloader of your device.
Now, extract the file named “downloadinf.zip” (which has been downloaded before) on your computer.
Then, copy the obtained file (“android_winusb.inf”) to path c:\android-sdk\extras\google\usb_driver.
Click yes if asked to overwrite something.
Type *#06# on your phone and get the IMEI number; write it down as you will need it a little bit later.
Now, go here.
On the first page click on “Yes, I’m sure”.
Agree to Sony’s legal terms and then hit “I accept”.
On the next page enter your name, email and your device’s IMEI number and click on “Submit”.
An unlock code will now be offered; note it down.
Turn off your device and connect the same with the computer by pressing on the POWER BUTTON +vol down
Install the drivers on the path mentioned above (c:\android-sdk\extras\google\usb_driver).
Now, on your computer open command prompt: “start -> run -> type cmd”.
On the cmd window enter the following commands (one at a time): cd C:\android-sdk\platform-tools; fastboot.exe -i 0x0fce getvar version; fastboot.exe -i 0x0fce oem unlock 0xKEY (replace key with the code obtained before).
That’s all, now the bootloader will be unlocked.
In the end, remove the USB cable and reboot your smartphone.
NOW OK WITH BOOT LOADER UNLOCKED ............
Firmware...............
it is best to roll back via flashtool to 20.1.A.0.47 firmware its more compatible with the custom recovery ...
download firmware..https://docs.google.com/uc?id=0B1oU02TyhZkAald4OFQ5MEVMOFk&export=download
download flashtool...https://github.com/Androxyde/Flashtool/archive/master.zip
place firmware in in firmware folder in flashtool directory connect phone holding powerand vol down and flash
NOW THE HEAD ACHE ROOTING BUT STICK WITH IT AND WE'LL DO IT
download http://www.mgyun.com/en/getvroot ( ok i understand people are sceptical of this but trust me it works it wins half the battle)
it will root xperia e1 alas! you will only have limited root privleges ((and it will install 2 apps easily uninstalled))) and it will install its own su app which does work but a bit annoying soo...
you can remove this via a delete system apps app, you do have enough privelages to do this....
install root checker it will say you dont have full root priveleges but su installed ? ok dont panic
CUSTOM RECOVERY
THIS WILL GET THEM FULL ROOT PRIVELEGES WE HAVE BEEN LONGING FOR ...
OK DOWN LOAD THIS RECOVERY IMAGE ...http://forum.xda-developers.com/attachment.php?attachmentid=3036643&d=1417104506
NOW
1. extract zip to somewhere on your computer & place img in the directory of fastboot.exe
2. Connect your phone in fastboot mode press vol + button while connecting to USB
3. Flash via fastboot ON FASHTOOL note to enter fast boot mode HOLD POWER AND VOL UP BLUE LIGHT SHOULD BE SOLID...
4.REBOOT..
OK NOW FINALLY
REBOOT INTO RECOVERY ....HOLD POWER AND VOL DOWN
NOW NAVIGATE TO ...ADVANCED MENU
OK NOW GO TO RE-ROOT SYSTEM (superSU) PRESS THIS REBOOT PHONE GO TO PLAY STORE RE-INSTALL SUPER USER APP
ROOTED...........................WHOOOOOOOO ps Check this with root checker
ALL COMMENTS WELCOME ...................................
There is one topic that provides all the answers for the European model. http://forum.xda-developers.com/android/help/huawei-honor-4x-che2-l11-qa-t3100429
There are so many version of Honor Mx4 so I was thinking have this thread specific for chinese version Che2-Ul00 with kirin CPU and 2Gb of Ram ( china Unicom ).
Remember to backup data before anything . Also charge phone and so on ( pray to gods, science etc... )
- rom Glory 4X Che2-UL00 2G - Update B425 can be found here: http://www.needrom.com/download/glory-4x-che2-ul00-2g/
- TWRP for Huawei 4C working nice with 4X https://drive.google.com/file/d/0B0iMDu5QRxNiVUpWRnRrN0tJQjg/view
- ADB download link
- to root phone get apk from here kingroot http://www.kingroot.net/
- superSU download from Here
Procedure:
Unlock bootloader for Honor 4X (Che2-UL00)
a) create an account here https://hwid1.vmall.com/
Provide following info
Mobile Model: Honor 4X Che2-UL00
MEID/IMEI:
S/N:
Product ID:
(to get your product id, enter *#*#1357946#*#*. An 8-digit ID is then displayed)
[ for me it was not instant, had to wait a little untill the product id was shown ]
The code should be given instant
b)Download the following files:
i) Adb fastboot tools + TWRP Recovery for Honor 4x + Honor 4x (che2-L11) original recovery:
Note: Get the file from post #10
ii) SuperSU by chainfire : UPDATE-SuperSU-v2.46.zip
iii) Connect honor 4x to your pc and install HiSuite
c)Preparing the phone
-Enable ‘Developer options’ (Settings > About phone > tap on ‘Build number’ until it’s enabled)
-Go to ‘Developer options’ and enable ‘USB debugging’
-Connect Honor 4x to PC (with HiSuite successfully connected)
-Extract zip file downloaded from b) i) to a folder (e.g. adbtools)
-Run cmd to get into command prompt from PC and change directory to adbtools
-On the Command Prompt window type ‘adb devices’, and it will list down device serial number, with a word device following behind.
-Type ‘adb reboot bootloader’ to kick the phone into Fastboot mode. You will see that your phone boot into a white screen with android robot with the words 'Phone Locked' (in blue)
-Type ‘fastboot oem unlock unlockingpassword’, where ‘unlockingpassword’ is the 16-digit number you’ve obtained earlier
-If successful, the phone’s screen will now show ‘PHONE Unlocked’ in red
-Reboot the phone to make sure everything runs ok.
Flashing custom recovery for Honor 4X (Che2-UL00)
To root your phone, you need to flash a custom recovery to it.
-Same as earlier step, run cmd to get into command prompt from PC and change directory to adbtools
-Type ‘adb devices’ to make sure that your phone is properly connected.
-Type ‘adb reboot bootloader’ to kick the phone into Fastboot mode.
-Type 'fastboot flash recovery TWRP.img'
-If successful, you’ll get a ‘finished’ confirmation with the time it took to complete the process.
-To confirm a successful flash, power down your phone. Then go Recovery mode (TWRP): Press volume up + power buttons
-In case you need to turn back to stock recovery, repeat the above steps, Type 'fastboot flash recovery recovery_offical.img' instead and reboot to your original stock recovery.
Rooting Honor 4X (Che2-UL00)
-Download Chainfire’s SuperSU ZIP file into the phone’s SD card
-Boot the device into Recovery mode
-Navigate into the ‘install zip from sdcard’ option,
-Find the downloaded SuperSU ZIP file, and flash it.
-Once done, reboot the Honor 4x and launch the SuperSU app, install the binaries, and reboot the phone again.
-Congratulations, your device is now rooted.
After TWRP is installed you can install gapps using TWRP install from zip. Take care you need lollipop version 64bit
Download from here
Hope all was working fine for you.
I cannot get it to boot into twrp, tried several custom imgs including the one you linked, even if i hold vol up and power as soon as i do fastboot reboot (I've read some devices overwrite back to stock recovery on first boot) any help?
Fixed it?
Huawei P8 Lite - Unlock Bootloader, Convert L23 to L21 and upgrade to Android 6 Official & Custom - (October 30, 2016).
IMPORTANT!
This tutorial describes the steps and necessary order to update the Huawei P8 Lite L23 or L21 to a newer version of Android. All in one tutorial to walk not looking separately each step is explained as much as I practice possible, if still do not achieve good for Re-Lean and try it as many times as necessary or ask if flat can not, if no then go for a beer and tacos, relax and try again later.
If you do not feel ready or deplano have not the foggiest idea of what arises in this best Tutorial leave your cell like this, if you also have your phone you used to what is necessary as well leave it, dedicate to research terms you do not understand Moreover, do not try to "run without first learning to walk," you're not coming back Millionnaire, or you're going back more handsome, strong, and you will be the most intelligent or interesting, or you will become immortal only by Update your phone to Android in June , so be patient, be aware and do not hasten. At the precise moment you decide to continue with this tutorial, you become absolutely responsible for what happens to your phone and your actions. Please proceed with caution and do not play the chingon.
ODYSSEY BEGINS HERE!
UNLOCK BOOTLOADER
You can get the code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
PD: Add a "w" to download.
https://ww.youtube.com/watch?v=AVmAEQjOnNQ
Following the Steps of taking screenshots and a previous orientation with EloyGomez Video:
https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator" and following the instructions (I recommend you go copying data from a notebook and save them, you never know when you can return to need):
Download "Huawei Product ID Generator" extract it where they like and run. (It is a very simple little program).
Product Model: HUAWEI Y300-0000 (selecionan that model).
Product IMEI / MEID: "Here put your IMEI / MEID".
Product ID: "Here Product ID generates them automatically according to product model & product IMEI / MEID previously placed, and which must wear on the page"
Enter the page to Unlock Bootloader Huawei, Whether the version in English or Chinese, the only thing that changes is the language. They can try with 2 pages.
Create an account so that they can log in, they can also log in with Facebook, it is very simple.
Once you have created your account and logged in, we see the page for the unlock code.
Fill the fields with the data that we requested and put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If you do not work with this, try with all models that are in the generator) (Also try with CAPITALS & lowercase).
Product Serial number: They get in Settings> About phone> Status> Serial Number.
Product IMEI: They get in Settings> About phone> Status> IMEI.
Product ID: They get the "Huawei Product ID Generator" (The program that generated them a while ago).
Captcha place the page requesting them and pressed Send or Submit, you must give the unlock code for Bootloader, copy it into the notebook (which I suppose must carry).
Now Turn to Settings> About Phone and Pulsen several times on "Compilation" until muentre them the message "now are a developer" Returning to Settings and you will see the option "Developer" tab, go there, if they are not active options because the activated developer, now a little move down and activate "USB debugging".
Download the "UNLOCK HUAWEI BOOTLOADER" extract it where they like, then connect your phone to the PC and run "UNLOCK BOOTLOADER.bat" program.
And the rest is a cinch, just follow the instructions anger us indicating the program, Drivers ADB & HiSuite (At most only have to accept the terms, click next and finish) were installed, the phone will restart a few sometimes they do not worry or despair pANIC not normal will reboot.
When they unlocked the Bootloader can disconnect your phone from the PC on and off.
Now let's check that everything went well, keep pressed "Vol-" while we connect to the PC, you will see a white screen with some letters (that's the Fastboot mode), and if they see the text "PHONE UNLOCKED" because Congratulations, Make unlocked the bootloader correctly.
Hechate a beer, a soft drink, Pau-Pau or commits a loaf to celebrate, but do not get too excited because it only been the beginning, we still some way to go, but certainly this is the most important step of all, because without having the unlocked Bootloader is not at all advisable to make root the phone, install a recovery or install a custom ROM, those using KingRoot arise after them so rare mistakes and to get them to damage the phone.
OFFICIAL FOR HUAWEI UNLOCK CODE BOOTLOADER:
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
HUAWEI OFFICIAL VERSION IN CHINA FOR UNLOCK CODE BOOTLOADER:
PD: Add a "w" to see the website.
https://ww.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU NEED TO DOWNLOAD:
Bootloader unlock huawei:
https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Generator Product ID:
https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize them the phone even after the program to automatically install the ADB drivers, then download, extract and install these, is not all that complicated should only connect your phone to the PC.
Run programs just follow the instructions and go. May need to click on Next, Finish, "Y" or "ENTER".
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
CONVERT L21 To L23
(If you reached this step means that are already Pros .... hahaha Wes is not true, it is believed!, Read on!)
At this point what we will do first is to install the TWRP Recovery and make full Wipes in order to erase the system and leave the phone in white to make a much cleaner installation without errors. So we follow the following instructions:
PD: You can install the TWRP who like V2 or V3, the procedures are the same, just change a bit the interface.
Instructions for both versions:
Download TWRP INSTALL RECOVERY (V2 or V3) P8 HUAWEI LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is for adb drivers and pc can detect the terminal is installed.)
We will see a blue screen console Type "and" or "accept" in everything and close the window. If you ask them to restart the pc, do it and go.
Begin your phone in Fastboot mode; Turn off the phone and press the "VOL" key and without releasing conectenlo to the PC until Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.rar P8" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.bat P8" and follow the steps.
Do not take more than 5 minutes is just a matter of going press ENTER.
Turn off the phone and Start TWRP Recovery Mode (Vol + & Power) Click on WIPE, Advanced Wipe and make full wipes:
Should be marked:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: not marques "micro sdcard".
Return to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
After you have successfully done this, we continue to spend our L23 to L21 P8 Lite, I recommend removing your SD card and SIM Card precaution. We follow the instructions:
Downloading "FlashRom C432B052 (Lollipop 5.0, 3.1 EMUI) Dual Sim Transition" extract it where they like, Begin your phone in Fastboot mode, connect it to PC, execute the "FLASH-ALL.bat" file (not execute permissions administrator), and follow the instructions that tells the program.
You complete the process when the phone is started with the new system, if you are targeting "About phone" say "Balong". To remove that must be installed Step2.
Downloading "Step2", extract it, look for the "UPDATE.APP" file and copy it to the "DLOAD" your SD card folder if you do not have then created. (Clearly it must first insert the SD on the phone).
Then head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP (Step2). The phone will reboot, start the installation and wait for it to finish. When you start the system and check the "About phone" no longer tell Balong but L21.
After this I recommend doing a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar settings "Backup and Restore" click "Factory Data Reset "mark" Delete memory ", press" Reset "and wait to finish the process. If for some reason out "Failed" do not worry just restart, anyway there will reset the cel, also do not worry if you have no signal or you will not detect the SIM, that is fixed by installing the following update.
Congratulations you get past your cel L21!
Files:
FlashRom C432B052:
https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2:
https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
UPDATED ANDROID 6 Official
The update command is as follows: "B052> B170> B560> B564" or "B052> B170> B550> B560> B564"
(Compiling B560 is the most stable so far).
Being in the B052 just have to download the following Compilaciones and be updated locally via:
"B170> B560> B564" or "B170> B550> B560> B564". I recommend that for every update they make, do a factory reset to eivtar errors, this is optional in the end, I just do them the recommendation from experience.
The B170 downloaded, extract the files, copy the DLOAD UPDATE.APP folder on your SD, head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP, the phone restarts, start the installation and wait end.
Now being in the B170, repeat the previous step to install the B550 or B560 Compilation. (Depending on the order above mentioned update, they work better or decide to take)
Now when they are on the B560 turn to the B564 but no longer appear the option "Update Local", so there are 2 options to perform the update: (and must have the UPDATE: APP previously copied to the DLOAD, the update.app always be copied to Dload no other):
Option 1:
Type the following code in the app called "* # * # 2846579 # * # *" (without quotes obviously).
Appear the famous hidden menu, click "Software Upgrade"> "SDCard Upgrade"> will leave them a message "Are you Sure" (are you sure?), Pressed OK, start the update and wait for it to finish.
Option 2:
Cel being off or on, press the (Vol-, Vol +, Power) aperezca keys until the update screen and wait to finish the process.
And that would be all, Congratulations and cell habras updated to Android in June!
If you get here it means you're half Pro.
Official Roms (Installation Via Local):
PD: Add "http:" extension links to download.
B170:
//download-c.huawei.com/download/downloadCenter?downloadId=57325&version=181091&siteCode=fi
B550:
//download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=es
B560:
//download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&siteCode=pl
https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
B564:
https://mega.nz/#!aAVhkbgI!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
UPDATED CUSTOM ROM ANDROID 6
Just click on the link, read the post and go following the instructions that you indicate. Patience and Success!
PD: Add "http" "://" "w" to see the website.
[TUTORIAL] Install Android B560 & B564 6 (Dual Sim) Custom Rom V2 - Sokkoban - (Updated July 18, 2016)
ww.htcmania.com/showthread.php?t=1188059
Rom ROM Spectre - Android 6 B560 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1200900
Rom ROM Phenom - Android 6 B564 (Dual Sim) - POST UPDATED (26 August 2016)
ww.htcmania.com/showthread.php?t=1220243
Rom ROM Opteron - Android 6 B574 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1218158
Nautilus Android ROM Rom 6 B564 (Dual Sim) - October 13, 2016
ww.htcmania.com/showthread.php?t=1241126
Rom ROM Helios - 6 B890 EMUI Android 4.1 (Dual Sim) - October 25, 2016.
ww.htcmania.com/showthread.php?t=1245909
DRIVERS EXTRAS
Here I leave some Drivers Extras to troubleshoot issues fastboot, adb, if the PC does not detect the Cell, the installation of each is very simple, just keep connected your cel to the PC, run programs, you must give "next" and then restart the PC if necessary.
Files:
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's all I hope I have been clear and supported with this Tutorial.
Greetings from Coatzacoalcos, Veracruz, Mexico! :fingers-crossed:
# SUPPORT HUAWEI P8 LITE
Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official + Install Custom Roms, Recoverys, Rootear, And Many Many Things - April 27, 2017 Updated.
IMPORTANT! This Tutorial describes the steps and order needed to Update the Huawei P8 Lite L23 or L21 to a newer version of Android. Everything in a single tutorial so that they are not looking for each step separately, It is explained as practical as possible, even if they do not do it well. Re-read and try it as many times as necessary or ask if they can not, if not As they go for a beer and tacos, they relax and try again later.
If you do not feel ready or deplaned you do not have the slightest idea of what is posed in this tutorial better leave your cell phone like this, if you have your cell phone you use for the necessary so leave it, dedicate yourself to investigate terms that you do not understand Even, do not try to "run without first learning to walk", you are not going to return Millionaire, nor are you going to become more handsome, strong, nor will you be the most intelligent or interesting, nor will you return immortal solo by Update your phone to Android 6 , So be patient, be aware and do not accelerate. At the moment you decide to continue with this Tutorial, you become absolutely responsible for what happens with your Mobile and your actions. Please proceed with caution and do not play chingon.
HERE THE ODYSEA BEGINS!
<<< UNLOCK BOOTLOADER >>>
IMPORTANT:
To know the Model Number & IMEI:
Enter Settings> About Phone.
To Know the Serial Number:
Enter Settings> About Phone> Status
To Know Product ID:
Enter this code: "* # * # 1357946 # * # *" on the telephone dial (without quotes), the number that appears, is the PRODUCT ID.
You can Obtain the Code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
Https://www.youtube.com/watch?v=AVmAEQjOnNQ
---------------------------------------------------------------------------------------------------------
Following the Steps of the Screenshots having already a previous orientation with the Video of EloyGomez:
Https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator", and following the instructions (I recommend copying the data obtained in a notebook and saving them, you never know when you may need them again):
Download "Huawei Product ID Generator", extract it wherever you like and run it. (It's a very simple program).
Product Model: HUAWEI Y300-0000 (select that model).
Product IMEI / MEID: "Here they place their IMEI / MEID".
Product ID: "Here you generate the Product ID automatically according to the Product model & product IMEI / MEID that they placed above, and it is the one they should use on the page"
Go to the Huawei page to unlock Bootloader, either the English version or the Chinese version, the only thing that changes is the language. You can try with all 2 pages.
They create an account so they can log in, they can also log in with Facebook, it's very simple.
Once you have created your account and logged in, we will see the page to obtain the unlock code.
Fill in the fields with the data that we are requested and we will put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If it does not work for them, try all the models that are in the generator) (Also try with CAPITAL & lowercase).
Product Serial number: You get it in Settings> About Phone> Status> Serial Number.
Product IMEI: You get it in Settings> About Phone> Status> IMEI.
Product ID: They get it with the "Huawei Product ID Generator" (the one that generated the program a while ago).
They place the Captcha that asks them for the page and they press Submit or Submit, they must give them the Code of Unlock for the Bootloader, they copy it in the scrapbook (that I suppose they must take).
Now go to Settings> About Phone and click on "Compilation" several times until the message "now you are a developer" is muted, you return to Settings and you will see the "Developer Options" tab, enter there, if the options are not active Of developer because they activate them, now they move a little down and activate "Depuracion USB".
Download the program "UNLOCK BOOTLOADER HUAWEI", Extract where you like, then connect your phone to the PC and run "UNLOCK THE BOOTLOADER.bat".
Already the rest is eaten, just follow the instructions that will indicate the program, the ADB & HiSuite Drivers will be installed (At most, they will only have to accept the terms, press next and finish), the Telephone will restart a few Sometimes do not worry or despair do not panic, it will be normal to restart.
When they have unlocked the Bootloader they can disconnect the Phone from the PC and turn it off.
Now let's check that everything went well, we kept pressing "Vol-" and at the same time we connected it to the PC, they will see a white screen with some letters (that is the Fastboot mode), and if they see the text "PHONE UNLOCKED" Congratulations, you have unlocked the bootloader correctly.
Make a beer, a soda, a Pau-Pau or Commit a Bread to celebrate, but do not get so excited because this is only the beginning, we still have a way to go, but certainly This is the most important step of all, Since without having the Bootloader unlocked it is not at all advisable to make Root to the phone, to install a recovery or to install a custom Rom, Those that use KingRoot for that after that they appear rare errors to them and even it damages them the telephone.
---------------------------------------------------------------------------------------------------------
OFFICIAL HUAWEI PAGE TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
OFFICIAL PAGE OF HUAWEI IN CHINESE VERSION TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://www.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU SHOULD DOWNLOAD:
Unlock bootloader huawei: https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Product ID Generator: https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize the phone even after the program installs the ADB Drivers automatically, then download, extract and install these, it is not at all complicated just connect your phone to the pc.
Run the programs just follow the instructions and you're done. You may have to press Next, Finish, "Y" or "ENTER".
Https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
---------------------------------------------------------------------------------------------------------
<<< CONVERT L23 IN L21 >>>
(If they already reached this step means that they are already Pros .... hahahaha not true, they believed it!, Keep reading!)
At this point what we will do first is to install the Recovery TWRP and make the Wipes Complete with the purpose of Erase the system and leave the Phone blank to make a Installation much Cleaner and without possible errors. To do this we follow the following instructions:
PS: They can install the Twrp that like V2 or V3, the procedures are the same, only slightly changes the interface.
Instructions for both versions:
Download INSTALAR RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
Start your Phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.bat" and follow the steps.
It will not take more than 5 minutes just to press ENTER.
Turn off Cell Phone and Start in Recovery Mode TWRP (Vol + & Power), Press WIPE, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
Go back to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
Https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
Https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
Https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Once the above is done correctly, we continue to move our P8 Lite L23 to L21, I recommend you remove your SD Card and SIM Card as a precaution. Follow the instructions:
Download "FlashRom C432B052 (Lollipop 5.0, EMUI 3.1) Dual Sim Transition", extract it wherever you like, start your phone in Fastboot mode, connect it to the PC, execute the file "FLASH-ALL.bat" (do not execute it with permissions Administrator), and follow the instructions given to you by the program.
When the process ends, the phone will start with the new system, if you go to "About the phone" it will say "Balong". To remove that you must install Step2.
Download "Step2", extract it, look for the file "UPDATE.APP" and copy it to the "DLOAD" folder of your SD Card, if you do not have it then create it. (It is clear that you must first insert the SD into the phone).
Then go to Settings> Updater> Menu> Local Update and select the UPDATE.APP (Step2). The phone will restart, the installation will begin and wait for it to finish. When you start the system and check in "About the phone" you will no longer say Balong, but L21.
After this it is recommended to do a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar of "Backup and Restore" settings, press "Reset factory data "Check" Clear internal memory ", click on" Reset "and wait for the process to finish. If for some reason "Failed" does not worry, it only restarts, the cell will have been reset anyway, do not worry if you do not have a signal or it does not detect the SIM, that is fixed by installing the next update.
Congratulations, you've already passed your cel to L21!
Files:
FlashRom C432B052: https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2: https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
---------------------------------------------------------------------------------------------------------
<<< UPDATE ANDROID 6 OFFICIAL >>>
The update order is as follows: "B052> B560> B564> B574> B584> B594> B596> B598> or" B552> B570> B560> B560> B564> B574> B584> B594> B596> B598 ".
Being already in the B052 we only have to download the following Compilations and go updating via local:
"B552> B570> B560> B564> B594> B594> B594> B596> B598 'or' B552> B570> B560> I recommend that for every update they make, make a factory reset to avoid possible errors, this is optional after all, I only make the recommendation from their own experience.
Download the B170, extract the files, Copy the UPDATE.APP to the DLOAD folder of your SD, go to Settings> Updater> Menu> Local Update and select the UPDATE.APP, the phone will restart, the installation will begin and wait for To finish.
Now on the B170, Repeat the previous step to install the B550 or B560 Compilation. (Depending on the order of updating mentioned above, that works best for them or decide to take)
Now when they are in the B560 we go to the B564 but the option of "Local Update" will no longer appear, so we have 2 options to carry out the update: (they should already have the UPDATE: APP previously copied in the DLOAD, The update.app is always due to copying to Dload there is no other):
Option 1:
Write the following code in the calls app "* # * # 2846579 # * # *" (without quotes obviously).
The famous hidden menu will appear, click on "Software Upgrade"> "SDCard Upgrade"> you will receive an "Are you Sure" message, press OK, start the update and wait for it to finish.
Option 2:
While the Cel is off or on, press the keys (Vol-, Vol +, Power) until you see the update screen and wait for the process to finish.
And that would be Todo, Felicidades ya habras updated Your phone to Android 6!
If you've already come up here means you're half Pro.
Official Roms (Local Via Installation):
ALE-L21C432B170
Https://mega.nz/#!eYUgxbrb!yccoxiIsXjIHdiGxdP6AU05S1fYQGNNMRba427BxEgs
ALE-L21C432B550
Http://download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=en
ALE-L21C432B560
Http://download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&sit eCode=pl
Https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
ALE-L21C432B564
Https://mega.nz/#!kJkESTKT!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
ALE-L21C432B574 - 2016.07.19
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip
ALE-L21C432B580
Https://mega.nz/#!2RUgxKiI!c-RX4wJsilZuxEDFwWJ2lcO-tpC4J5Q3uGbHUo4c1Vw
ALE-L21C432B584 - 2016.11.21
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v67128/f1/full/update.zip
ALE-L21C432B586 - 2016.12.13
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v69882/f1/full/update.zip
ALE-L21C432B588 - 2016.12.26
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v72428/f1/full/update.zip
ALE-L21C432B594 - 2017.02.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77344/f1/full/update.zip
ALE-L21C432B596 - 2017.03.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v80333/f1/full/update.zip
ALE-L21C432B598 - 2017.04.20
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v83472/f1/full/update.zip
---------------------------------------------------------------------------------------------------------
<<< INSTALL CUSTOM ROMS, RECOVERYS, ROOTEAR, AND MANY MORE THINGS >>>
I have compiled a collection of various interesting contributions to facilitate your search, so check it out!
Http://www.htcmania.com/showthread.php?t=1310020
*
<< DRIVERS EXTRAS >>
Here I leave some extra drivers to solve problems with issues of fastboot, adb, in case the PC does not detect the mobile, the installation of each is very simple, just keep your cell connected to the pc, run the programs, you have to Give it to "next" and restart the PC if necessary.
Files:
Https://mega.nz/F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's it, I hope I was clear and supported with this Tutorial,
Greetings from Mordor!
---------------------------------------------------------------------------------------------------------
Empty
Im trying to use huawei product id generator but I always get this message in unlock page
I tried with c8812 and Y300-000 and all have the same results.
ALE-L21
Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID.
ROOT Vibe K5 Note LP or MM
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired.
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device/software.
* Same statement for XDA.
*/
Finally I got the method to root Lenovo Vibe K5 Note/A7020a48. If you are the one who is tired of searching how to root your device then you are at right place
But before we get started here are the things that you need (only for marshmallow user, lollipop user need only 1 thing which is given in method section)
Requirements
1. Your Device (of course)
2. Your Current Stock Rom's Firmware(You can easily get it in firmwarefile.com)
3. A Working PC (first check whether you can successfully connect your device to your pc or not)
4. ADB and Fastboot Tools
5. A working Brain
BONUS:-You can use this method to root any (5.1+) device (if it has general unlocking system, This method is supported by 95% devices).
Now It's Time To Rock
METHOD for Lollipop users
Download and install kingroot, open it and follow the tutorial given in that app
METHOD for Marshmallow Users
1. Make complete backup of your data, Everything except ext. storage of your device will be erased.
Now Follow the steps from 2 to 11 to unlock bootloader (you can skip it if you already unlocked it)
2. Go to your phone settings>About phone, tap on build no. 7 times and then go back you will see a new { } developer option just above the about phone option
3. Go to developer option and enable OEM unlocking and USB Debugging
4. Connect your device to your pc and install adb and fastboot tool system wide
5. Open command prompt or power shell
Note- Windows 10 users have to write .\ as prefix before every command.
6. Type
Code:
adb devices
You will see a prompt on device, just click on always allow this computer and press ok or allow whatever given there. You will see your a long set of random Numbers and letters after that if its written device then your phone is successfully connected to your pc.
7. After that type
Code:
adb reboot bootloader
Your phone will reboot into bootloader mode
8.Type
Code:
fastboot getvar all
There you see at last some lines which tells you about your bootloader status if you see Unlocked = no then your bootloader is locked and if it says Unlocked = yes then it is unlocked and if it is unlocked then you can stop here
Now for those who has a locked bootloader
9. Type
Code:
fastboot oem unlock
(In some devices which is shipped with android 6.0 or higher you may have to write fastboot flash unlock don't write this command for your Vibe K5 note/A7020a48)
10. Most Important step Type
Code:
fastboot format userdata
. If you skip this you may get bootloop (I skipped that and got bootloop)
11. Type again
Code:
fastboot getvar all
Now you will see Unlocked=yes and Congrats!!! you has unlocked your phone's bootloader
12. Disconnect your device and press and hold power button until it reboots
Now follow the steps to root your device
13. Now from your stock firmware file extract boot.img which is given in the folder named firmware and copy it any where in your device
14. Install magisk manager from here -> Official website
15. After opening the app you'll see it is written that Magisk not installed click on the install button and select patch boot.img option,
16. Now select your boot.img file which you have extracted from your firmware file. After selection it will start to patch that boot.img and store patched_boot.img file in download folder of your device internal storage, copy that file at any folder in your pc (not in desktop)
17. Now go to the folder where you copied that patched_boot.img file and press right click on your mouse while holding shift button of your keyboard (Shift + Right click in simple words) and you will see an additional option of open command window/powershell here click on that and connect your device with your pc.
18. Before getting started with commands follow step 2 and 3 again
19. Repeat step 6 and 7
20. After going into bootloader mode Type
Code:
fastboot flash boot patched_boot.img
(in this code boot is partition and patched_boot.img is file name which you are going to flash).
21. Disconnect your phone ,press and hold powerkey until it reboots
Congrats Device ROOTED!!!
#reserved
But there's a much simpler method to get root access with a single click. i cant able to attach photos.
did not work
Shubham1815 said:
#reserved
Click to expand...
Click to collapse
bro after entering the cmd fastboot oem unlock my lenovo vibe k5note displayed
fastboot mode
unlock not allowed
now what should i do ......plz help
Tried but not work for MM. The bootloader cannot be unlocked. Maybe your bootloader is different from the others, would you share it out?
mihir999 said:
bro after entering the cmd fastboot oem unlock my lenovo vibe k5note displayed
fastboot mode
unlock not allowed
now what should i do ......plz help
Click to expand...
Click to collapse
Do you enabled allow oem unlocking?
Shubham1815 said:
Do you enabled allow oem unlocking?
Click to expand...
Click to collapse
I enabled oem unlocking but still it shows "unlock not allowed"
Does this really works?? I want to try it
Did you actually unlock bootloader and root the device ? As far I know, in all other threads, none has confirmed any method.
After "fastboot getvar all" command, nothing happens. (PC => waiting for device.. PHONE => stuck at "Fastbood Mode"text)
Same for "fastboot oem unlock" command
I really want to permanent root for => LENOVO K5 NOTE (a7020a48). Years gone but no luck !
If your method is true then please answer us :crying:
Got stuck at "Unsupportive project for unlock" on my vibe K5note. Any help here please?
so . for those who are stuck at fast boot try and install the driver from this link :
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
this didn't work for me and i had to download and install "rescue and smart assistant" from the lenovo website
Rescue and Smart Assistant (RSA) - Lenovo Support AU
support.lenovo.com
once downloaded and installed , i could update the "Android" driver from device manager --> selecting the moto interface (not the composite one) instead the google one ( step by step : youtube.com/watch?v=nQjg6ePnGAc )
Once that's done , reboot to fastboot via adb
Now when I type fastboot devices I can finally see my device
however... i was getting " (bootloader) Unsupportive project for unlock "
no luck . . .
Edit:
if you however do have an OTG cable maybe try this method :
GitHub - BiltuDas1/unlock-Bootloader: Unlock Bootloader of any Device using PC or Android.
Unlock Bootloader of any Device using PC or Android. - GitHub - BiltuDas1/unlock-Bootloader: Unlock Bootloader of any Device using PC or Android.
github.com
good luck
any luck guys!?!?! or should i completey give up )