Database Develop

[EOL] [Rom/Kernel] SM-G935D/SC-02H Marshmallow (May/06/17)

This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (Marshmallow)
TWRP 3.0.3-0: https://www.androidfilehost.com/?fid=817550096634747128
Rooted Rom: https://www.androidfilehost.com/?fid=385035244224413763
HKernel for hero2qltedcm:https://www.androidfilehost.com/?fid=745425885120706416
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/tw-6.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969

Reserved

travis82 said:
This will be for the Japanese variant of the s7 edge this is an unlocked model also.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (SC02HOMU1APL2)
TWRP: Coming soon
Debloated Rom: Coming soon
Kernel: Coming soon
Click to expand...
Click to collapse
Can this be used for sm g9350 hongkong?
Sent from my SM-G9350 using Tapatalk

Please use common sense and read ITS FOR THE JAPANESE VARIANT.. READ THE MODEL #. Good gosh stop posting stupid questions dude.

Thanks I'll try this when I get to work.
I can't seem to unlock my bootloader, I'm unable to flash TWRP and enter the recovery. It just says Recovery mode -> Warranty bit set: Recovery and enters into a normal boot after trying it a few times.
Edit:
used the official TWRP and recovery now works. Now trying to install the rom
Edit2:
When trying to install it keeps giving me the following error:
This package is for "SC-02h,hero2qledcm" devices; this is a "hero2qltedcm"
Update process ended with ERROR: 7
Error installing zip file '/sdcard/TWRP/SC-02H_Debloated.zip'
Edit3:
I edited the update-script and removed the assert.
However I don't notice any changes in the rom itself. It still has some bloatware (docomo stuff)

ahh ok i thought it would use sco2h not dcm I can fix that sorry, and I assume twrp is doing the same. I will use a dcm kernel in twrp, let me know if that kernel boots please I dont have the device in hand so I am relying on you all to let me know.
USE crom.apk to unlock bootloader you should find it in galaxy apps store. I'm pretty sure others have unlocked their bootloader doing the same thing. I also used to have someone install my hkroms and kernels on the jap variant so I know you can unlock the bootloader.
CROM: https://www.androidfilehost.com/?fid=385035244224394932
can you unlock the bootloader with that, its a link to what we used to unlock ours.
I need you to unlock your bootloader first please. Sounds like that is the issue.

If I run that app it just exits with Crom Service has stopped working.
Your rom works fine, it has root which is what I needed the most.
Just wish there was a way to remove the sim lock from the device without having to beg Docomo.

I bet I have my asserts all messed up here man I'm sorry. I see SC-02H than hero2qltedcm, than SM-G935D soo I need to get this in the correct order. Would you mind shooting me a pm so I can hangouts you so we can knocks this out quickly?

updated op with twrp recovery and kernel.

This works, root and most of the bloated software is gone

Off topic question (need some insight)
You have started to make a working TWRP for the Docomo variant - thank you for your work (hopefully people in JP using the Docomo version find success).
I know this is off topic but I thought you could provide me with a better understanding.
I am currently using the au KDDI variant (SCV33-Snapdragon) and have successfully installed TWRP (3.0.2-0) with ability to mount /data following xda, youtube, and a Vietnamese forum using google translate; BUT I am unable to keep TWRP ability to mount /data after flashing re-engineered boot file via odin to apply root (Snapdragon Variant Root). TWRP can still be used to go into recovery, mount /ext sdcard, and reboot. I've tried many different styles of rooting after and before installing TWRP, in addition to flashing in different ways - but I still failed. It's either have full working TWRP that can mount /data but without root; or, have root but TWRP that can't mount /data (basically useless as it cannot install anything nor, make backups).
I apologize for such long response, any insight or somewhere you can point me to where I can do more research, as this is how far I have come so far, but still fail to acquire both (Yes I have watched numerous YT vids and read countless post stating devs have not yet found a way on the US-Snapdragon variants, which I understand this may apply to the JP variant too) . Thank you.

With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?

SCV33 looks exactly the same as SC-02H. What's the difference? single sim dual sim? Can you use sc-02h roms for it? I need more information unless you guys want to start donating me devices.

bu06034 said:
With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?
Click to expand...
Click to collapse
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.

travis82 said:
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.
Click to expand...
Click to collapse
First, I really apprecate the work you have put in on bringing ROOT and TWRP to users in Japan. If I can help by doing some testing for you with my DoCoMo model, I'd be happy to do so!
Regarding my original question, I was not talking about an engineering kernel. I was thinking that if I flashed a custom ROM for the SG-935F Hong Kong (Exynos) model, and then flashed your kernel over it, would it work?
As I understand it, the kernel is the interface between the OS and the hardware. Maybe that is ignorant? The reason I ask is because this process was quite common for Japanese S4 users to employ custom ROMs for US S4s; i.e. Flash the US custom ROM (e.g. Mokee or Albee95) and then flash the Japanese S4 kernel onto it.
I understand the question might seem silly to you, but I don't have the hundreds of hours required to reach your level of expertise. I have invested sufficient time to understand much of the jargon; and the tools and methods employed to get root and flash ROMs. More than that, I rely on asking the experts, like you. :good:

you would have to port firmware framework and a bit of other things, secondly hong kong does not self exynos versions here. It's all Qualcomm.

SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82

SCV33 test 1
travis82 said:
SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82
Click to expand...
Click to collapse
Travis,
TESTED (Semi-working)
I've done some testing on my SCV33 variant using what you've made for the SC-02H.
[Kernel]
I flashed the HKernal Beta 2, using the SC-02H FW, and TWRP Unofficial you've provided onto my SCV33 Galaxy S7e and it is really snappy and fast. Very nice kernel. Any DoCoMo users out there should flash this - though still beta it does the job. I had no problems flashing this in TWRP.
[TWRP Unofficial]
I was able to mount all partitions - works. I had no problem flashing this using Odin.
[Problems I've Encountered]
* After rebooting into TWRP Unofficial many times. My log reads "Unable to mount /steady." I have no idea what this is or what partition it belongs too; but, TWRP is still able to do everything else such as mount /data, wipe /system, etc. - I don't think its a big issue to be honest. Just wanted to let you know.
* After installing everything and everything working fine. I do not/cannot communicate with networks (cannot connect to wifi, cannot call, and no data). I had check SIM status = not available, IMEI = Unknown, SN = Unknown. I had made an EFS back up of my KDDI rom with working network communication and restored with with TWRP Unofficial. Installation via TWRP log has stated successful, but upon reboot problem has not been fixed. Any ideas I should try? I also believe the software from the SC-02H OS handles how im about to connect to data towers and catch frequencies. Putting in my own APN does not work.
* Crom Service.apk you've provided at an earlier comment to unlock bootloader, which I've installed, does not work. All it does is FC when trying to open the app - installation is fine. I had also tried getting one from the internet, and looking for it at the Samsung Galaxy App Store - the internet one does the same, FC. Samsung Galaxy App Store does not have Crom Service available. I am assuming SCV33 wont ever be able to unlock bootloader.
* Debloated Rom Zip does not work, after doing a clean install to Stock Odin, installing TWRP Unofficial, system ext4 format, wiping /system /data /internal storage /dalvikArt /cache, and flashing Debloated Rom Zip with TWRP - states installed successful and boots up. Though upon booting I still have all the bloat there. In addition, many FCs from many different apps, even after reboot (e.g. tap and play, google play store, google services). The rom still functions after a couple more reboots after a /dalvikART cache wipe, but it just doesn't seem as fast as the stock one though. I believe this maybe a conflict due to my device, and myself as well.
----
Oh BTW the SCV33 is:
*SM-G935J
*OS 6.0.1
*Single SIM only
I will try my best do to other methods on trying to get this to fully work, but the Network Communication thing always halts my progress. I really dig this kernel man.
Again, thank you for your hard work and dedication to the Snapdragon Variant its very much appreciated :highfive:. Looking at the Exynos sub-forum I get so jelly at times.

OK is yours has a different modem then the rest. Also your partitions might be a bit different, I really need that device in my hands to look at the partition layout. If you can find SCV33 kernel source I will be more than happy to make a kernel for this variant also. I call my kernels beta because it's just how I do it.
Ok found your source for the kernel I'll check out the configs and maybe make a kernel later on this week.

SM-G935J (SCV33)
Here is a test kernel: https://www.androidfilehost.com/?fid=529152257862698452
Rooted rom: https://www.androidfilehost.com/?fid=529152257862698453
Let me know if there is any issues.

■GUIDE■how to flash any N910C rom on N910S/L/K■N916K/L/S

HELLO FOLKS I WAS USING SNAPDRAGON NOTE 4 FROM 2 YEARS BUT FINALLY I GET MY HANDS ON A EXYNOS KOREAN NOTE 4 SO WHEN I GOT THIS PHONE IT WAS FULL OF KOREAN APPS/DIALER/KEYBOARD/CANNOT SWITCH BETWEEN 2G/3G/4G NOT ENOUGH LANGUAGES ETC ETC.
SO I DID SOME RESEARCH FINALLY I CAME UP WITH THIS SOLUTION AND IT IS FAIL PROOF METHOD NOW WE CAN FLASH AND ENJOY ANY SM-N910C "6.0.1 MARSHMALLOW ROM" ON ANY KOREAN MODEL OF NOTE 4 N910S/L/K N916K/L/S.
WARNING
BEFORE YOU BEGIN THIS METHOD INCLUDE ROOT AND THIS WILL TRIGGER KNOX 0×1 AND DEFINITELY
VOID YOUR WARRANTY.
INSTRUCTIONS.
DOWNLOAD THE N910C ROM/ KERNEL/ THE VOICE FIX FILE/SUPERSU.ZIP THAT YOU WANT TO FLASH.
IF YOU ARE ALREADY ON MARSHMALLOW AND HAVE TWRP RECOVERY INSTALLED THEN SKIP STEP 1 & 2 .
STEP 1
FLASH LATEST OFFICIAL STOCK MARSHMALLOW FIRMWARE VIA ODIN FOR YOUR MODEL TO GET LATEST BOOTLOADER/RADIO/MODEM.
STEP 2
FLASH TWRP RECOVERY VIA ODIN.
TWRP RECOVERY FOR N910S/L/K https://www.androidfilehost.com/?fid=24572369242689194
TWRP RECOVERY FOR N916S/L/K
https://www.androidfilehost.com/?fid=24572369242689195
STEP 3 (VERY IMPORTANT)
BOOT INTO TWRP GO TO BACKUP IN AND BACKUP YOUR CURRENT ROM INCLUDING (MODEM/EFS) IF YOU MISS THIS STEP YOU MAY END UP "UNKNOWN BASEBAND" "NULL IMEI" AND YOU WILL LOSE NETWORK SO MAKE SURE MAKE A BACKUP FROM TWRP "EFS AND MODEM":
STEP 4
IN TWRP GO TO WIPE/ADVANCE WIPE AND SELECT ( DALVIC CACHE/SYSTEM/DATA/CACHE) AND SWIPE TO WIPE.
STEP 5
FLASH ANY MARSHMALLOW CUSTOM ROM IS FOR N910C FROM TWRP .I RECOMMEND HANIBASE STOCK ROM 1.01 THIS ROM WILL CONVERT YOUR KOREAN NOTE 4 TO FULLY N910C INTERNATIONAL MODEL AND THIS ROM DOESN'T HAVE ANY BUGS AT ALL EVERYTHING WORKING WITH GREAT BATTERY LIFE.
HANIBASE STOCK DEODEXED ROM LINK
https://forum.xda-developers.com/note-4/development/rom-hani-base-t3355958
STEP 6
FLASH VOICE FIX.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
VOICE FIX FOR N910S/K/L N916/S/K/L FOR ALL STOCK AND NOTE 7 PORT ROMS MARSHMALLOW
https://mega.nz/#!vUtT3QqZ!ymTIG-4tMncbE1r3PuuzLWu7o58QecHdyKfoEEvokoo
THIS WILL FIX THE ECHO NOISE DURING VOICE CALLS.
WHEN YOU FLASH VOICE FIX IT WILL START AROMA INSTALLER TO FIX VOICE CALLS.
~~~~~~~~~~~~~~~~~~~~~••~~~~~~~~~~~~~~~
FOR N916K AND N910K>>>SELECT N910K MODEL IN AROMA TO FIX VOICE CALLS
FOR N916L AND N910L>>>SELECT N910L MODEL IN AROMA FIX VOICE CALLS
FOR N916S AND N910S>>>SELECT N910S MODEL IN AROMA TO FIX VOICE CALLS.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
VOICE FIX FOR N910S/K/L N916S/K/L FOR NEMESIS REFINED ROM MARSHMALLOW ONLY.
https://mega.nz/#!SM12VBYL!74S4t6RQpx7j3ZwAPk5jbUw0-FZbTpGLvBEENpGupxo
AFTER FLASHING VOICE FIX ON N916S/K/L YOUR BLUETOOTH CAN BE BROKEN SO TO FIX BLUETOOTH FLASH ZIP FROM LINK BELOW.
BLUETOOTH FIX FOR N910SKL N916SKL ONLY FOR NEMISIS REFINED ROM MARSHMALLOW.
https://mega.nz/#!DQ0TxagD!L6Kx3_HrUN3gZWS-nVHA9zVCf0-rTC0jvc3sngk7itg
STEP 7
GO TO TWRP/RESTORE AND RESTORE YOUR (EFS & MODEM ONLY) THAT YOU BACKED UP EARLIER.
STEP 8
FLASH CUSTOM KERNEL FOR YOUR MODEL SUCH AS PRIME KERNEL/SPACELEMON KERNEL DEPEND ON YOUR MODEL.
PLEASE MAKE SURE YOU DOWNLOAD CORRECT KERNEL FOR YOUR SPECIFIC MODEL OTHERWISE YOUR PHONE WILL NOT BOOT AND IT WILL GET STUCK AT SAMSUNG LOGO.
PRIME KERNEL LINK
https://forum.xda-developers.com/note-4/development/kernel-prime-kernel-t3684922
SPACELEMON KERNEL LINK
https://forum.xda-developers.com/note-4/development/kernel-spacelemon-kernel-extended-t3506956
STEP 9
FLASH SUPERSU.ZIP. TO GET FULL ROOT.
https://www.androidfilehost.com/?fid=889764386195902173
Thanks to @Chainfire
YOU CAN TRY MAGISK ROOT BUT I DIDN'T TESTED IT SO TRY ON YOUR OWN RISK.
STEP 10
REBOOT AND WAIT UNTIL SETUP SCREEN SHOWS AND ENJOY ANY N910C ROM ON ANY KOREAN MODEL NOTE 4.
STEP 11
FIX FOR OVER HEATING AND BATTERY DRAINING AFTER INSTALLING N910C ROM ON N910SKL/916SKL.
https://forum.xda-developers.com/showpost.php?p=73870981&postcount=14
WORKS WITH ALMOST ANY MARSHMALLOW ROM I TRIED THIS METHOD WITH THIS EXYNOS N910C ROMS BELOW.
DARKLORD NOTE5 PORT ROM.
DITTO NOTE7 ROM.
NEMISIS REFINED ROM.
HANIBASE STOCK DEODEXED ROM.
AURORA NOTE7 PORT ROM.
EROBOT V30/31/32/33
AND MANY MORE CANT REMEMBER THEY ALL WORKED WITH ME INCLUDING VOICE CALLS/DATA/SMS/MMS/MIC
BUGS
N916S/K/L NFC IS Not WORKING WITH ANY N910C ROMS.
The NFC Toggle will show as greyed out you can't turn it on or off so to fix it you have to disable NFC permanently.
Open root explorer go to system/app and search for NFC folder there you will see "Nfc.Apk" rename it to "Nfc.bak" save and exit then reboot device.
Now you can turn on and off nfc but it will not work.
DO NOT DELETE NFC APK FROM SYSTEM FOLDER OTHERWISE SETTINGS MAY CRASH.
DISCLAIMER / I AM NOT RESPONSIBLE FOR ANY DAMAGES OF YOUR DEVICE I JUST MADE THIS GUIDE TO HELP FOLKS WITH KOREAN MODEL OF NOTE 4 DON'T BLAME ME IF ANYTHING GOES WRONG IF YOU FOLLOW THE STEPS CORRECTLY THERE SHOULD BE NO ISSUE.ANY QUESTIONS I AM HAPPY TO ANSWER.
:good:HIT THANKS IF THIS THREAD HELPS.:good:

As a matter of fact we need a guide on how to flash others rom on n910c.

edsoedso said:
As a matter of fact we need a guide on how to flash others rom on n910c.
Click to expand...
Click to collapse
Well all the exynos note 4 roms will work on n910c in fact most of the roms first made for n910c then some fix been made ro run on other models such as N910U/S/K/L/916S/K/L.
If you are asking to run snapdragon roms from N910F/T/G on exynos N910C then i am afraid the answer is impossible.

Trex888 said:
Well all the exynos note 4 roms will work on n910c in fact most of the roms first made for n910c then some fix been made ro run on other models such as N910U/S/K/L/916S/K/L.
If you are asking to run snapdragon roms from N910F/T/G on exynos N910C then i am afraid the answer is impossible.
Click to expand...
Click to collapse
This guide not working for MIUI Roms... ANy help??? i'm using N910S

hello, precisely I am in this situation. I have a note 4s lte (N916S) and I was looking for a tutorial to install a rom for N910C. however, I have never done the requested manipulations in your tutorial. I would like, if possible, that you help me to understand better. I stay tuned, thanks
---------- Post added at 08:20 PM ---------- Previous post was at 08:09 PM ----------
can I have the various steps specific to the N916S. and also know how to access the TWRP mode, how to flasher VOICE FIX and SUPERSU.ZIP

Olalaekan said:
This guide not working for MIUI Roms... ANy help??? i'm using N910S
Click to expand...
Click to collapse
This guide for touchwiz based roms only.

Kay225 said:
hello, precisely I am in this situation. I have a note 4s lte (N916S) and I was looking for a tutorial to install a rom for N910C. however, I have never done the requested manipulations in your tutorial. I would like, if possible, that you help me to understand better. I stay tuned, thanks
---------- Post added at 08:20 PM ---------- Previous post was at 08:09 PM ----------
can I have the various steps specific to the N916S. and also know how to access the TWRP mode, how to flasher VOICE FIX and SUPERSU.ZIP
Click to expand...
Click to collapse
All answers are in the OP please read carefully.
If you are asking how to flash twrp on your phone there is 100s of posts already in xda and videos in youtube just use that search button.

Samsung Galaxy Note 4: https://www.youtube.com/playlist?list=PLfImjYY0vktuVVJFZI9f_Z-uQU3UDOw62

Hi, I re-read the tutorial. however the worry that I am facing is that I can not find the CSC of my country "Ivory Coast" and the custom kernel of my model N916S lte with CPU exynos

Kay225 said:
Hi, I re-read the tutorial. however the worry that I am facing is that I can not find the CSC of my country "Ivory Coast" and the custom kernel of my model N916S lte with CPU exynos
Click to expand...
Click to collapse
There is Spacelemon kernel available link below for N916S.
https://forum.xda-developers.com/note-4/development/kernel-spacelemon-kernel-extended-t3506956
CSC does not matter choose any one it will not effect your device.

You can flash 910c rom on slk but it will be burning hot like a p*** star and drain battery very fast.

hi all, i has install many TWRP recovery on my galaxy N916S, but i have this message `` recovery is not seandroid enforcing``when i want to enter recovery mode. Please help me, thanks

Kay225 said:
hi all, i has install many TWRP recovery on my galaxy N916S, but i have this message `` recovery is not seandroid enforcing``when i want to enter recovery mode. Please help me, thanks
Click to expand...
Click to collapse
That message is normal because you have custom recovery.
Just ignore it .
Whenever you will flash back stock rom it will dissappear.

khonoiquadi said:
You can flash 910c rom on slk but it will be burning hot like a p*** star and drain battery very fast.
Click to expand...
Click to collapse
There is a fix for that heating issue i figured out.
You will need root explorer then go to system/bin and here you will find a file name "debug_interface_proxy" just delete it and reboot device .
because this file belong only in N910C model and this is causing device over heating.
No more heating No more battery drain Problem solved.

yes exactly, but I can not access TWRP recovery to continue the process to install the Custom rom

Kay225 said:
yes exactly, but I can not access TWRP recovery to continue the process to install the Custom rom
Click to expand...
Click to collapse
Turn of your device then press volume up+home+power for 5 seconds it will boot into twrp.
If it did not boot into twrp then you have flashed wrong twrp that is not for your model.

Ok. But can you help to get TWRP Recovery for my phone N916S???

Thanks to Treex888, now I enjoy N910C rom on my Galaxy Note 4 N916S. However i have voice destortion, despite haven choosen correct model N916S during voice fixe flashing. can repair that and how?

Kay225 said:
Ok. But can you help to get TWRP Recovery for my phone N916S???
Click to expand...
Click to collapse
Download Twrp for N916S from link below.
https://www.androidfilehost.com/?fid=24572369242689195

Kay225 said:
Thanks to Treex888, now I enjoy N910C rom on my Galaxy Note 4 N916S. However i have voice destortion, despite haven choosen correct model N916S during voice fixe flashing. can repair that and how?
Click to expand...
Click to collapse
Did you follow all the steps correctly given in OP first page ?
Read Op first page all answers are there.
Flash this voice fix file.you must flash this file after flashing the N910C rom.
Choose your correct model and country csc
Also download and flash correct kernel depending on your model.
https://mega.nz/#!vUtT3QqZ!ymTIG-4tMncbE1r3PuuzLWu7o58QecHdyKfoEEvokoo

Downgrade back to 5.0.1 from 6.0/7.0 for full root.

Not sure if anyone care or still want to go back to 5.0.1.
It is possible if you download COMBINATION_VZW_FA50_G925VVRU4AOJ1 (Google it yourself its free out there.)
After flashing combination file you can root it with kingroot then replace it with superuser ( https://forum.xda-developers.com/a310/general/how-to-remove-replace-kingroot-kinguser-t3308989 ), then you can use flashfire to flash 5.0.1 rom.
You will need to keep the sboot/bootloader from combination file i order to boot with 5.0.1 kernel.
Anyone know if theres good rom that will still work with this method? I tied some stock root rom ( https://forum.xda-developers.com/ve...ment/rom-stock-rooted-g925v-vru1aoc3-t3115121 ), it seems to be missing some file after flashing. It boots up gets signal, but it is buggy. If anyone know if bugs from flashing this way cannot be fixed then let me know so I can stop trying .

I flashed the COMBINATION_VZW_FA50_G925VVRU4AOJ1 tar file but how do it install apks so i can use kingroot. unless you have forum to share with me

I haven't used the XDA forums in over a year. I don't know if I have the courage to downgrade from 7.0 to 5.X

Snowby123 said:
I haven't used the XDA forums in over a year. I don't know if I have the courage to downgrade from 7.0 to 5.X
Click to expand...
Click to collapse
Something similar for me honestly. I just downloaded the firmware stated, did the steps and it seems to have worked fine. Even with root, I honestly liked 7.0 on this device. Dang locked BL. :/

3Cubed27 said:
I flashed the COMBINATION_VZW_FA50_G925VVRU4AOJ1 tar file but how do it install apks so i can use kingroot. unless you have forum to share with me
Click to expand...
Click to collapse
You can install apks using ADB -- I think you can get it from Android Studio or try https://www.xda-developers.com/install-adb-windows-macos-linux/
Once you have ADB installed, just connect your S6 to your PC, open terminal, and run "adb devices" to confirm your phone is visable
Then to install an apk, have it downloaded on your PC and run
"adb install {path/to/apk}"
Example:
adb install Downloads/NewKingrootV5.3.7_C197_B451_xda_release_2018_06_19_20180620193529_242043.apk

I don't really think there was a 5.0.1 ROM designed for the Revision 4 bootloader outside of the Combination Firmware. I think this may be a reason.

Delgoth said:
I don't really think there was a 5.0.1 ROM designed for the Revision 4 bootloader outside of the Combination Firmware. I think this may be a reason.
Click to expand...
Click to collapse
I know this is old. But I come from a s8. So we should be able to even though rev4 bootloader flash any 5 System IMG. The bootloader from the fa50 combination should suffice to boot any lolipop system since they are not incremented

TheMadScientist said:
I know this is old. But I come from a s8. So we should be able to even though rev4 bootloader flash any 5 System IMG. The bootloader from the fa50 combination should suffice to boot any lolipop system since they are not incremented
Click to expand...
Click to collapse
Correct, you just need the bootloader and kernel capable of booting the system up. This is how I was able to use any of the LP AP Build/System on my rev 3 Note5.
All the LP builds were rev 2. But I had a LP bootloader and kernel. Realistically someone should try, but you might need to root the combo firmware first and use flash fire/flashify/safestrap to flash the system image. Because ODIN might not let you.

Delgoth said:
Correct, you just need the bootloader and kernel capable of booting the system up. This is how I was able to use any of the LP AP Build/System on my rev 3 Note5.
All the LP builds were rev 2. But I had a LP bootloader and kernel. Realistically someone should try, but you might need to root the combo firmware first and use flash fire/flashify/safestrap to flash the system image. Because ODIN might not let you.
Click to expand...
Click to collapse
Yea Odin pushing the rooted firmware with combo boot was patched on s8 about the same time. But now where using edl to push a rooted combination file with su flash fire and safestrap.
My s8 is running a bit 5 nougat combo which that bootloader is reserved for Oreo and pie. But I'm running a rooted system IMG I made up from a equivalent rev2 nougat system and runs fine other than 80% charge limmit on the newer combos. Even my j3 limmits to 80 on combo. But I found a hack to charge to 100% I got posted in the s8 threads. I'm gonna try this over the next few days. If there's a eng bootloader with permissive kernel nougat should be able to be rooted too.

TheMadScientist said:
Yea Odin pushing the rooted firmware with combo boot was patched on s8 about the same time. But now where using edl to push a rooted combination file with su flash fire and safestrap.
My s8 is running a bit 5 nougat combo which that bootloader is reserved for Oreo and pie. But I'm running a rooted system IMG I made up from a equivalent rev2 nougat system and runs fine other than 80% charge limmit on the newer combos. Even my j3 limmits to 80 on combo. But I found a hack to charge to 100% I got posted in the s8 threads. I'm gonna try this over the next few days. If there's a eng bootloader with permissive kernel nougat should be able to be rooted too.
Click to expand...
Click to collapse
The question is, what did you do to.modify your stock rom to be able to boot on the combo bootloader? I'm still a little lost on that.

Delgoth said:
The question is, what did you do to.modify your stock rom to be able to boot on the combo bootloader? I'm still a little lost on that.
Click to expand...
Click to collapse
I didn't on the j3.

TheMadScientist said:
I didn't on the j3.
Click to expand...
Click to collapse
Maybe not on the j3 haha.

Delgoth said:
Maybe not on the j3 haha.
Click to expand...
Click to collapse
Wrong device ****. I got so many phones lying around. I haven't really messed with the s6 much. I got a few other on the front burner

TheMadScientist said:
Yea Odin pushing the rooted firmware with combo boot was patched on s8 about the same time. But now where using edl to push a rooted combination file with su flash fire and safestrap.
My s8 is running a bit 5 nougat combo which that bootloader is reserved for Oreo and pie. But I'm running a rooted system IMG I made up from a equivalent rev2 nougat system and runs fine other than 80% charge limmit on the newer combos. Even my j3 limmits to 80 on combo. But I found a hack to charge to 100% I got posted in the s8 threads. I'm gonna try this over the next few days. If there's a eng bootloader with permissive kernel nougat should be able to be rooted too.
Click to expand...
Click to collapse
This is what I was asking about though. I still can't get anyone to explain how to make the stock ROMs work on the newer more locked devices. It's like a big secret or something. But it is possible on the S6, Note5, and S8. Probably the S7 too.
But 5.0.1, 5.1.1, and 7.0 are built a lot differently and I imagine the method is different.
TheMadScientist said:
Wrong device ****. I got so many phones lying around. I haven't really messed with the s6 much. I got a few other on the front burner
Click to expand...
Click to collapse
Before the S9 Line most everything has been built pretty similarly.

[2022][ROOT] [Extreme Syndicate] [G960U/U1/W][G965U/U1/W][N960U/U1/W]

Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Below Method is no longer supported if you choose to use the unstable method below you do so on your own
This method is brought to you entirely by @elliwigy He is the reason for this exploit and method.
With that being said, Extreme Syndicate Root is now available!
Before Starting This Process Get A USB2 Mini Hub You Are Most Likely Going Too Need It​
EXTREME SYNDICATE ROOT METHOD
​OEM Toggle Does Nothing On US Model Phones
This root method breaks things and most likely will not be able to be used as a daily driver
You can be on any version bootloader. This will update you to V9 bootloader
This method will work if you are on Android 10 or Android 9 Pie but will put you on Android 8 Oreo. There is no root for Android 10 or Android 9 Pie
You will not be able to use magisk
You will not be able to flash full custom rom like Lineage or any other AOSP roms however GSI system images can be used
You cannot flash custom boot images or recovery images such as regular TWRP
Odin does not work on some later computers with USB 3.1 chip controllers the only work around is using a USB 2.0 mini hub
It is your responsibility to make sure you can use adb properly
Root will break things such as safetynet so deal with it
Disclaimer:
The Extreme Syndicate team and it's affiliates are not responsible for your actions or your device if any issues are to arise. You flash this and utilize these files at your own risk. You have been warned!
Notes:
- Safestrap recovery is now available with working MTP while in Safestrap
- This does NOT trip KNOX so don't ask.
- Bootloader is of course still locked.
- This uses some partitions from combo firmware which means 80% battery.
- Each variant will have its own post in its own download section. Download the right stuff!
* Variants this should work on are: N960U/U1/W, G965U/U1/W, G960U/U1/W. If you do not have one of these variants then this forum is not for you!
- Initial files/method will leave you on Oreo stock root.
- It works on latest rev's from rev1 up to the most recent revs.
- As of the initial first release, all variants have an issue with MTP not working except while in Safestrap
- S9 and S9+ also might have some issues with the selfie cam.
- Note 9 @elliwigy
- S9+ @klabit87
- S9 @jrkruse
- Telegram Support Group for All 3: https://t.me/joinchat/DxwvAlhtzHjg4EI9973BGQ
Anything here with a .7z extension will get unzipped before using
Anything here with a .zip extension will get flashed as a zip in safestrap
Anything here with a .tar or .md5 gets flashed in odin
Anything here with a .img extension gets flashed as image in safestrap
Downloads S9 Files:
Safestrap_S9_Cmd_Line.7z
Download S9+ Files:
Safestrap_S9_Plus_Cmd_Line.7z
Download Note9 Files: -- Only For Bit 8 Or Lower
Safestrap_N9_Cmd_Line_Bit8.7z
Instructions to Inject Safestrap:
1. Download and unzip Safestrap_S9__Cmd_Line.7z for your device
2. Plug phone into computer and run Safestrap.exe
3. Follow instructions on screen to enable USB Debugging
4. Then from there the process will be mostly automatic just follow prompts on screen
5. When done flashing BootSwap file you need to hold the buttons to boot to recovery but since we swapped boot and recovery images it will boot system.
Instructions For Flash Rom:
1. Download below files and copy files for rom to phone system img and vendor img and odm zip
Downloads S9 Files:
Stock_Rom_G960.7z
GSI_Rom_G960.7z
Download S9+ Files:
Stock_Rom_G965.7z
GSI_Rom_G965.7z
2. In safestrap flash system img then vendor img and odm zip .
3. Choose data wipe and advance and check data
4.. Now reboot system you will have to hold buttons to reboot to recovery until you see safestrap splash then click continue. You must do this on every reboot. If you do not it will reboot to stock recovery. If it reboots to stock recovery just reboot system and hold buttons to reboot to recovery again.
5. When rom is booted up your computer will not recognize the phone for mtp file transfer. Adb does still work so you can transfer stuff that way (you need to switch to ptp transfer method in the dropdown) or use USB adapter and use a thumb drive.
6. Biometrics do not work so don’t try to setup fingerprint or face recognition.
The GSI rom mtp works GSI rom is rooted already just flash phhsupersu.apk found in GSI_Rom zip
If using other GSI roms you have too choose A_Only ones and will probably need to flash the Sh_Remover.zip found in the GSI_Rom zip
ShoutOuts:
@elliwigy For the method and help and everything else
@klabit87 - Ditto
@me2151 - Ditto
@gsm-CHEN - Ditto
@mweinbach - For always posting my achievements on the XDA News portal as well as giving me someone to troll sometimes when bored.
@ShaDisNX255 - He was our best tester, give him credits for testing out GSI as well!
@everyone else I am forgetting!
ENJOY!

Mine

Wow, this is actually pretty good. S9 Snapdragon + treble enabled device? Man, this is going to change everything! I hope something good comes out of this

Does it work on the U/U1 variants of the S9+ as well?

krion64 said:
Does it work on the U/U1 variants of the S9+ as well?
Click to expand...
Click to collapse
It probably will but no files have been made for s9+ yet and not yet tested
Sent from some device I modified

krion64 said:
Does it work on the U/U1 variants of the S9+ as well?
Click to expand...
Click to collapse
It’s confirmed working on both SM-G960U/U1 and SM-G965U/U1
Sent from some device I modified

Any chance that this might be used and not trip knox? This sounds like a similar method that was used in previous devices.

Argyrus said:
Any chance that this might be used and not trip knox? This sounds like a similar method that was used in previous devices.
Click to expand...
Click to collapse
You cannot trip knox on a locked bootloader
Sent from some device I modified

jrkruse said:
You cannot trip knox on a locked bootloader
Sent from some device I modified
Click to expand...
Click to collapse
Gotcha, any idea of when you might get this working for G965U or if you will allow testers?

Argyrus said:
Gotcha, any idea of when you might get this working for G965U or if you will allow testers?
Click to expand...
Click to collapse
Did you not read la couple post above yoir question
Sent from some device I modified

jrkruse said:
Did you not read la couple post above yoir question
Sent from some device I modified
Click to expand...
Click to collapse
I did, but you made two posts, one that you said no files have been created and not tested then also state that it has been confirmed.
Since that seems to be the case then my bad for being confused.

Argyrus said:
I did, but you made two posts, one that you said no files have been created and not tested then also state that it has been confirmed.
Since that seems to be the case then my bad for being confused.
Click to expand...
Click to collapse
When it was tested I posted it was confirmed. Stuff will be released soon
Sent from some device I modified

jrkruse said:
When it was tested I posted it was confirmed. Stuff will be released soon
Sent from some device I modified
Click to expand...
Click to collapse
Awesome, sorry for any confusion.

jrkruse said:
You cannot trip knox on a locked bootloader
Sent from some device I modified
Click to expand...
Click to collapse
jrkruse said:
It probably will but no files have been made for s9+ yet and not yet tested
Sent from some device I modified
Click to expand...
Click to collapse
That means I can have root and have Samsung pay? God damn that makes me wet

Dhdeanha said:
That means I can have root and have Samsung pay? God damn that makes me wet
Click to expand...
Click to collapse
As of right now it's still detecting su binaries. So Samsung Pay probably may not work.

On my G965/U1 I do not even see a "/system/etc/init/init.lab.rc" file on my device, is this because I am updated to the latest Android 9 December 1st security patch?

elguy said:
On my G965/U1 I do not even see a "/system/etc/init/init.lab.rc" file on my device, is this because I am updated to the latest Android 9 December 1st security patch?
Click to expand...
Click to collapse
Don't worry about it. It will work on it, it's been proven to work exactly on Android 9, Dec 2019 security patch.

Wow! that's exciting, I can't wait until this releases. Looks like I'm not updating my phone anymore until then. Especially exciting if it works on Android 9 December 2019 security patch

the question is how likely this will be patched in Samsung's next update and how much time this may cause them to delay their next security patch.

Extreme Syndicate Root for S9 is live!!

SM-G960/G965/0/U/U1/Android_10_Root_RMM_Forceencrypt_Remover_Add_US_Carriers_Fix_Safetynet_AIO

Must Have An Unlocked Bootloader To Do This!
Must Be On One UI 2.5 Firmware Or Updating Too One UI 2.5 Firmware to Use
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet and install decrypted csc files. No flashing of zips is required. There are 2 tar files too choose from one will add all US carrier functions to your phone and the other is for Non US carriers ​
Downloads SM-G9600
USERDATA_G960U_AIO_TWRP_RECOVERY_8_12_21.tar.md5 -Use on android 10 when updating. This is for US U model phones that are bootloader unlocked
USERDATA_G9600_US_AIO_TWRP_3_5_0_0_RECOVERY.tar.md5 -Use on android 10 when updating. This adds US calling features and US CSC files. Use this if using A US carrier
USERDATA_G9600_NON_US_AIO_TWRP_3_5_0_0_RECOVERY.tar.md5 -Use on android 10 when updating. This adds almost all latin and Non US csc files to rom. Use this if not using A US Carrier
Downloads SM-G9650
USERDATA_G965U_AIO_TWRP_RECOVERY_8_12_21.tar.md5 -Use on android 10 when updating. This is for US U model phones that are bootloader unlocked
USERDATA_G9650_US_AIO_TWRP_3_5_0_0_RECOVERY.tar.md5 -Use on android 10 when updating. This adds US calling features and US CSC files. Use this if using A US carrier
USERDATA_G9650_NON_US_AIO_TWRP_3_5_0_0_RECOVERY.tar.md5 -Use on android 10 when updating. This adds almost all latin and Non US csc files to rom. Use this if not using A US Carrier
Odin3_v3.14.1_3B_PatcheD.zip
Files For SM-N9600 Found Here
TWRP Recovery Provide by @klabit87
Install Instructions
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode
3. Use patched 3.14 odin and load files in USERDATA_***_AIO_TWRP_3_5_0_0_RECOVERY.tar.md5 in the USERSDATA slot of odin and flash firmware. If updated firmware for example from android 9 to 10 load full odin firmware in appropriate slots with above file in the USER DATA slot and flash
4. Phone will reboot to TWRP and automatically install stuff needed.
5. Phone Will reboot 2 times back to TWRP to remove encryption if data is encrypted and continue automatic install. If data is not encrypted and no wipe is needed phone will reboot once to TWRP and continue automatic install.
Features
@klabit87 Q kernel with Added powersave governor, conservative governor and ondemand governor support
All carrier functions should work like wifi calling, volte, Hd call and etc
No patches or mod zips are needed phone will already be rooted
Rmm is removed and vaultkeeper service disabled
Bluetooth is patched for pairing to survive reboots
Netflix Fix Included
Samsung Health working
Unencrypted Odm csc feature files for easy editing
Added cricket carrier support for working wifi/hd calling
Native Call Recording added
Caller Id and Spam protection added
Places tab added too dialer
Samsung Backup Account added to Verizon CSC
Stock Network Speed added to status bar
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Kernel Source https://github.com/klabit87/android_kernel_samsung_sdm845
TWRP Source https://github.com/klabit87/twrp_and...g_star2qltechn
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@me2151
@stang5litre
@Raymonf for modified odin
@afaneh92
@rayan-refoua for boot animation
@TheMadScientist
@kdrag0n for safetynet fix

Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7

mine

Nice! Awesome job as always!
Sent from my Pixel 2 XL using Tapatalk

Keep up the good work! ??

Sorry for the noob questions.
If I am reading this correctly, it should work on my G9650 that is currently already rooted and running @stang5litre rom, correct?
And this would upgrade to android 10?
Can I roll back to Stang's rom or is this a one way street?
Also, do you have any screenshots of what this Rom looks like?
Thanks in advance.

I'm getting a phone encrypted message upon restarting from twrp, any ideas??

tigras54 said:
I'm getting a phone encrypted message upon restarting from twrp, any ideas??
Click to expand...
Click to collapse
Ignore it. You can access internal storage and mount data correct?
Edit: You are talking about the red warning error in Twrp correct?

KBuskill said:
Sorry for the noob questions.
If I am reading this correctly, it should work on my G9650 that is currently already rooted and running @stang5litre rom, correct?
And this would upgrade to android 10?
Can I roll back to Stang's rom or is this a one way street?
Also, do you have any screenshots of what this Rom looks like?
Thanks in advance.
Click to expand...
Click to collapse
Yes its for g9650 and yes you will be android 10 and you can only roll back if that rom is v6 bootloader

Thank you very much for your work sir
Just one question, does this work for the g9600 model? why I tried to install and I got an error

Hexioo said:
Thank you very much for your work sir
Just one question, does this work for the g9600 model? why I tried to install and I got an error
Click to expand...
Click to collapse
No it does not. I may make rom for sm-g9600 eventually

jrkruse said:
Ignore it. You can access internal storage and mount data correct?
Edit: You are talking about the red warning error in Twrp correct?
Click to expand...
Click to collapse
I'm sorry I didn't specify, it wasn't however in twrp, when I tried booting into system it said system is encrypted and I need to enter a password to get into my phone. I fixed that issue! I had to instead of deleting data and cache, I had to format data and enter yes to confirm formatting entire phone. I restarted it hung then restarted again, I was finally in, I then came into another error as my setup kept crashing when trying to restore from google account. I flashed that zip that you posted for samsung mods, it got passed that. I finally got into the system and passed the setup, the fingerprints etc pin anything locking the phone will not work... is that normal? as of now? Plus I can't get my samsung account to work at all, it keeps saying to sign-in again to continue using my account, sync is broken. I can't get any photos back etc as of now,. as eveything is on my samsung cloud and I really don't like my phone in-secure as I always have nosy friends. I'm pretty good at trouble shooting but these right now are my issues. Magisk is working and functioning properly, idk if it's a problem with magisk because my other device (Huawei Honor 8) has the same issue with Magisk and the password on lock-screen. My s6 Edge Plus has no issues with Magisk 20+ though and has lock screen functions etc. fingerprints.

Hexioo said:
Thank you very much for your work sir
Just one question, does this work for the g9600 model? why I tried to install and I got an error
Click to expand...
Click to collapse
No it does not. I may make rom for sm-g9600 eventually

jrkruse said:
No it does not. I may make rom for sm-g9600 eventually
Click to expand...
Click to collapse
wow that would be great, there are currently not many options for the g9600 model

tigras54 said:
I'm sorry I didn't specify, it wasn't however in twrp, when I tried booting into system it said system is encrypted and I need to enter a password to get into my phone. I fixed that issue! I had to instead of deleting data and cache, I had to format data and enter yes to confirm formatting entire phone. I restarted it hung then restarted again, I was finally in, I then came into another error as my setup kept crashing when trying to restore from google account. I flashed that zip that you posted for samsung mods, it got passed that. I finally got into the system and passed the setup, the fingerprints etc pin anything locking the phone will not work... is that normal? as of now? Plus I can't get my samsung account to work at all, it keeps saying to sign-in again to continue using my account, sync is broken. I can't get any photos back etc as of now,. as eveything is on my samsung cloud and I really don't like my phone in-secure as I always have nosy friends. I'm pretty good at trouble shooting but these right now are my issues. Magisk is working and functioning properly, idk if it's a problem with magisk because my other device (Huawei Honor 8) has the same issue with Magisk and the password on lock-screen. My s6 Edge Plus has no issues with Magisk 20+ though and has lock screen functions etc. fingerprints.
Click to expand...
Click to collapse
Im sorry for some reason the OP reverted back to an early state on my direction. I updated them too state that you should add any accounts or set any security until you are through setup. You may not want to restore data and start fresh on this as this is not a sm-g9650 rom anymore its a sm-g965u rom. Just by chance who is your carrier? Fingerprint and all lockscreen security works fine for me so maybe wipe data and go through setup again without connecting to wifi or adding any accounts or security

My carrier is at&t

tigras54 said:
My carrier is at&t
Click to expand...
Click to collapse
I added those extra instructions to the OP. Sorry they were not there Im not sure why they didnt save when I updated them yesterday. Like I said I would wipe data and go through setup again without adding anything, Then once through add your stuff

glad I could help
---------- Post added at 04:27 AM ---------- Previous post was at 04:24 AM ----------
as I have restored apps etc and everything I will have to suffer until update hopefully soon a fix can be found as restoring everything again will take a long timeee

tigras54 said:
glad I could help
---------- Post added at 04:27 AM ---------- Previous post was at 04:24 AM ----------
as I have restored apps etc and everything I will have to suffer until update hopefully soon a fix can be found as restoring everything again will take a long timeee
Click to expand...
Click to collapse
well if you wipe and got hrough the process fingerprint and lockscreen stuff will work

Just did all you said and kinda upset now as it still did not fix... same error