hello exhibit community, i assume this is the correct forum, otherwise sorry mods. i recently "inherited" a t599n and i am taking the challenge of compiling an ubuntu touch rom for the device. i have very little android/pc experience. however, i have successfully built from source (cyanogenmod) and ported quite a few roms to other devices. i just upgraded my ubuntu version to saucy as precise was unable to install the phablet tool. i will be using meticulous's github sources and i will start building tonight/tommorrow depending on repo dl. any dev suggestions?
fail
i was unable to build the meticulus kernel with ubuntu source provided. i was able to build the system.img and boot.img. but w/o the ubuntu touch kernel specifics, the results are a bootloop. im off to new ventures for now as im unable to port anything to this device as of yet. i have some ideas revolved around slimroms soon.
Unified kernel for msm8974 devices
hi all
we are cooking 1 kernel for all msm8974 devices for all custom roms
Source
https://github.com/sonyxperiadev/kernel
in this moment Z1 (honami) and Z2 (sirius) are tested
feel free to fork, joyn and push back
XDA:DevDB Information
Unified , Kernel for the Sony Xperia Z2
Contributors
jerpelea, Kali-, tilal6991, cdesai
Kernel Special Features:
Version Information
Status: Testing
Created 2014-10-07
Last Updated 2014-10-13
By "custom" you mean based on stock roms or AOSP-derived?
adwinp said:
By "custom" you mean based on stock roms or AOSP-derived?
Click to expand...
Click to collapse
both
depending on what an developer wants to build
What will the impact of this project be on areas that have been problems for aosp projects such as hardware drivers ?
furrypotato said:
What will the impact of this project be on areas that have been problems for aosp projects such as hardware drivers ?
Click to expand...
Click to collapse
1 kernel to rule them all means that 1 hal fixed in 1 device works on all devices
1 patch merged in kernel to fix something fixes same problem on all devices
jerpelea said:
1 kernel to rule them all means that 1 hal fixed in 1 device works on all devices
1 patch merged in kernel to fix something fixes same problem on all devices
Click to expand...
Click to collapse
I hope I'm not presumptuous or wrong: will it come with CWM and/or TWRP recovery versions?
Many thanks.
bonderbond said:
I hope I'm not presumptuous or wrong: will it come with CWM and/or TWRP recovery versions?
Many thanks.
Click to expand...
Click to collapse
this is just source code so depends on developers on what android fork is used
jerpelea said:
both
depending on what an developer wants to build
Click to expand...
Click to collapse
Unless I'm mistaken, the sony source doesn't work with pure AOSP. All AOSP or derivatives roms use the CM android_kernel_sony_msm8974pro or forks of it.
My question is thus the following: is this kernel source compatible with AOSP or like "kernel-copyleft", only with stock rom derivatives?
My custom kernel works on the latter, but I need to use the "msm8974pro" trees for pure AOSP.
Unless I'm missing something?
adwinp said:
Unless I'm mistaken, the sony source doesn't work with pure AOSP. All AOSP or derivatives roms use the CM android_kernel_sony_msm8974pro or forks of it.
My question is thus the following: is this kernel source compatible with AOSP or like "kernel-copyleft", only with stock rom derivatives?
My custom kernel works on the latter, but I need to use the "msm8974pro" trees for pure AOSP.
Unless I'm missing something?
Click to expand...
Click to collapse
it works perfectly on aosp and derivates
new guides published
http://developer.sonymobile.com/knowledge-base/open-source/open-devices/
kernel is rebased
z3 platform (shinano) added to kernel
https://github.com/sonyxperiadev/kernel/commits/aosp/LNX.LA.3.5.1-01110-8x74.0
status
z1 - bringup in progress
z2 - boots
z3 - boots
feel free to push fixes
broadcom wifi is now merged in kernel
crash has been fixed
broadcom wifi crash fixed
Can't boot
@jerpelea I've compiled AOSP Lollipop and it boots fine. I've compiled the kernel from 3.5.2.2 branch of the unified kernel source and successfully made zImage. I've combined the zImage with the resulting dtb and the ramdisk from the AOSP build. I can't get the device to boot for some reason. It's stuck at the Sony boot logo. Did I miss a step ? I've searched online but couldn't get enough help about this.
Tried the same with Kitkat too but same result. Doesn't go past the sony boot logo.
UPDATE
Got it to work The command line argument in the guide provided has android boot device as qcom whereas the one compiled during AOSP has it as "shinano" Took me 1 build to understand this Back to work again
hi All
Busy weeks ....months ...
Progress so far
- unified 3.4 kernel is stable for daily use and community tweaking
As some of you have already seen we have started work on comunity 3.10 unified kernel
This kernel is not finished and not stable but is an invitation for developers to joyn, test and improve a kernel built "by community for community"
Br
J
build guide has been updated for easy reading
http://developer.sonymobile.com/kno...evices/how-to-build-and-flash-a-linux-kernel/
hi all
kernel 3.10 is progressing nice
it can soon be used on SONY AOSP Project
master branch on devices uses 3.10 kernel
l-mr0 branch uses 3.4 kernel
br
J
hi all
3.10 is progressing nice
at this point can be used for L MR1 and shows good battery savings
more enhancements and bugfixes will come soon
br
J
Hi @jerpelea, which of the branches should be used for the 3.10 kernel?
I ll be appreciated that the unified kernel can support d6563.
Hi,
I have some question regarding Hazou's CM port for the XT890:
Why is there no official CM for the Razr i? (There seem to be CM port's for practically every other Moto phone)
What does it mean that the port is "inofficial" as opposed to "official"?
Is the source code of the CM port publicly available?
Thanks in advance!
Cheers
chris-cross-crack said:
Hi,
I have some question regarding Hazou's CM port for the XT890:
Why is there no official CM for the Razr i? (There seem to be CM port's for practically every other Moto phone)
What does it mean that the port is "inofficial" as opposed to "official"?
Is the source code of the CM port publicly available?
Thanks in advance!
Cheers
Click to expand...
Click to collapse
1. Because I am not an official maintainer and the device needs external patches to be fully functional
2. See 1
3. Yep, the cyanogenmod sources are on github and mine as well. U can make a perfect copy on your device if u use the cyanogenmod sources with parts of my sources.
Can anyone upload the AOSP device tree for sprout to compile AOSP based ROM?
I'd like to build a proper Chroma ROM (the one currently built doesn't have supersu built in, no bootanimation, etc)
I cannot seem to build with CM's device tree, I've been messing with it all around to no avail
Thanks.
KcLKcL said:
Can anyone upload the AOSP device tree for sprout to compile AOSP based ROM?
I'd like to build a proper Chroma ROM (the one currently built doesn't have supersu built in, no bootanimation, etc)
I cannot seem to build with CM's device tree, I've been messing with it all around to no avail
Thanks.
Click to expand...
Click to collapse
https://www.reddit.com/r/androiddev...for_a_nonnexus/?_e_pi_=7,PAGE_ID10,8849235716
I hope this discussion help you have a look at it. And this too http://stackoverflow.com/questions/29077612/build-aosp-rom-with-cyanogenmod-device-files
Thanks, I finally figured out everything, AOSP doesn't do inline kernel building like CM so I need to make sure Android.mk exists on the kernel folder. That exactly what my problem is.
Happy to help...i hope we see numbsr of quality aosp builds from you.Aosp roms on this device has been a bit buggy uptill now.Best luck buddy.
Hi,
I know there are 7.0 or even 7.1 Roms for Thea but I'm looking for the simplest one without any super features cuz i don't need them. For Titan ther is these Rom https://forum.xda-developers.com/mo.../rom-aosp-oms-substratum-moto-g-2014-t3470909 simple and stable. There are even sources and the dev will help to build it for sure - he don't want to build it because he has no testing device. So here is my question:
Is there some dev willing to build the simples and standard Rom for Thea? I thought every Android development should start and be based on AOSP rom...