Afternoon all!
Have been pulling my hair out for almost a week now trying to get this TF701 updated. I'm stuck trying to get the bootloader updated at this point. Curently version 10.6.1.14.10 I have been able to get the device unlocked and curently have twrp 2.8.7.2 installed. Before installing twrp I tried just about every rom update on asus website and the system wouldn't pick the file up as an update. Now that I have twrp installed I get an error "error executing updater binary in zip....." I am guessing that is because the bootloader is on an old version.
Can someone please give me a little guidance to get this updated.... any help is greatly appreciated.
Thank you.
sattech200 said:
Afternoon all!
Have been pulling my hair out for almost a week now trying to get this TF701 updated. I'm stuck trying to get the bootloader updated at this point. Curently version 10.6.1.14.10 I have been able to get the device unlocked and curently have twrp 2.8.7.2 installed. Before installing twrp I tried just about every rom update on asus website and the system wouldn't pick the file up as an update. Now that I have twrp installed I get an error "error executing updater binary in zip....." I am guessing that is because the bootloader is on an old version.
Can someone please give me a little guidance to get this updated.... any help is greatly appreciated.
Thank you.
Click to expand...
Click to collapse
Installing TWRP should automatically update your ASUS boot loader to the latest version. Are you sure that you have the tf701 and not another version, tablet? Also, which flavor or region of the tablet do you have US, WW? I am guessing that you downloaded TWRP and forced it to install through fastboot mode...?
DOH!!! Boy do I feel like a total moron! Went to check/confirm model number and it is indeed a TF700, not a TF701 like I swear I seen at first. Anyways it does look like I have the latest asus updates so all is good. I was also able to just successfully install Zombi-pop 5.1.1 and it's booting now for the first time. I have the US sku and I did use fastboot to load twrp.
boy I can't believe this....thank you very much for pointing out what I've over looked for a week now.
Can you click on the thanks button, it helps, Thanks!
lost and confused......
sattech200 said:
Afternoon all!
Have been pulling my hair out for almost a week now trying to get this TF701 updated. I'm stuck trying to get the bootloader updated at this point. Curently version 10.6.1.14.10 I have been able to get the device unlocked and curently have twrp 2.8.7.2 installed. Before installing twrp I tried just about every rom update on asus website and the system wouldn't pick the file up as an update. Now that I have twrp installed I get an error "error executing updater binary in zip....." I am guessing that is because the bootloader is on an old version.
Can someone please give me a little guidance to get this updated.... any help is greatly appreciated.
Thank you.
Click to expand...
Click to collapse
Hi. I trust you well. I was wondering if I could request your assistance with updating my TF701T to a new version of android. I have tried many methods and none has worked. I am actually more confused now as to where to start and what to download and install. If possible maybe direct me where I could get a step by step guide with the links to the correct downloads.
Kind Regards
Rob
Related
Hi there,
we have this phone and manually rooted and flashed it. Now it runs on TWRP 2.7.8.0.
Since a few days Marshmallow OTA is shown but cannot be installed after download: Error "This package is for K50a40; this is a K3Note".
Nothing worked so far trying to update it. I tried using this method but also does not work out since I cannot get into original Recovery (pushing all 3 buttons as mentioned in this thread to choose language does not work).
Can anybody tell me how I may install this upgrade? I already downloaded the OTA file and stored it as update.zip on the phone. With TWRP updating will not work out. I only managed to get into normal recovery once but could not use it due to being in chinese only.
Any help on how to install this update is highly appreciated!
Many thanks in advance!
Bye
Renth said:
Hi there,
we have this phone and manually rooted and flashed it. Now it runs on TWRP 2.7.8.0.
Since a few days Marshmallow OTA is shown but cannot be installed after download: Error "This package is for K50a40; this is a K3Note".
Nothing worked so far trying to update it. I tried using this method but also does not work out since I cannot get into original Recovery (pushing all 3 buttons as mentioned in this thread to choose language does not work).
Can anybody tell me how I may install this upgrade? I already downloaded the OTA file and stored it as update.zip on the phone. With TWRP updating will not work out. I only managed to get into normal recovery once but could not use it due to being in chinese only.
Any help on how to install this update is highly appreciated!
Many thanks in advance!
Bye
Click to expand...
Click to collapse
I also had the same problem but mine said, Error "This package is for K50a40; this is a K50-T5".......
Sorry guys - need to bring this up again. Any hints? OTA update is still offered but cannot be installed due to said error.
Do I have to downgrade or install an older stock ROM in order to get updated? If so any hint or link (also to appropriate threads) is highly welcome!
i had twrp but i wanted ota updates now and i flashed stock recovery and locked the bootloader but after i update from ota i always end up getting installation failed why is that? i didnt root
Spiffy Jay said:
i had twrp but i wanted ota updates now and i flashed stock recovery and locked the bootloader but after i update from ota i always end up getting installation failed why is that? i didnt root
Click to expand...
Click to collapse
You really dont need to re-lock bootloader. You could have just downloaded and flashed through twrp and then flash supersu. But i am not sure why it is failing on your end.
Same thing here, always installation failed
Try a different type c cable.. Apparently, I was having this issue
Op3t original cable : Android auto and adb side load works perfectly on my op3
But when used on op3t, android auto cannot detect and side load of ota fails.
Used the original cable from Google Nexus 6p, Android auto works perfectly but I didn't try side load adb because I already flash via TWRP instead.
Try changing cables
Found a FIX!
its sort of a long process if anyone is interested lmk sorry would post but doont know if anyone cares
Spiffy Jay said:
its sort of a long process if anyone is interested lmk sorry would post but doont know if anyone cares
Click to expand...
Click to collapse
I too had the same problem. Can you explain me how to get that?
sure @kabeeradam so what you need to do or atleast what worked for me was go all stock recovery and rom and had bootloader locked too.
flash the beta rom from oneplus through sideload then flash the stable rom from oneplus then do the normal ota update and it should work. lmk for any other info also sorry if it looks like a mess this is my first time explaining these types of things. hope it helps
Spiffy Jay said:
sure @kabeeradam so what you need to do or atleast what worked for me was go all stock recovery and rom and had bootloader locked too.
flash the beta rom from oneplus through sideload then flash the stable rom from oneplus then do the normal ota update and it should work. lmk for any other info also sorry if it looks like a mess this is my first time explaining these types of things. hope it helps
Click to expand...
Click to collapse
I am in 3.5.3 now. Locked bootloader. Still OTA gets failed. When I tried Oxygen OS 3.5.3 through sideload also gets failed. Can you give me the link for beta rom???
@kabeeradam im a complete dumbass i realized that i posted this on the wrong phone it was meant to be one the oneplus 3 not 3t but it should be the same i guess
http://downloads.oneplus.net/devices/oneplus-3/ flash open beta 10 through sideload and then flash oxygenos 3.2.8 and do normal ota update im sorry i just saw
Hey All,
I'm looking for some help nito update this device to the latest OTA update. I have installed TWRP 3.0.2.0 that came with the dirtycow method. The device found the latest updated released in the past few days but when going to install it, it brings up the TWRP (which is how it should install). Now I don't mind if I can't grab this latest version due to whatever reason, but how would I go about updating the device? Currently it's running the stock version 6.1 6/17/2016.
Sorry if this has been answered somewhere, but still kinda new with Android devices and the whole rooting process. I'd like to be able to keep TWRP if at all possible and keep this device updated. Also I saw there was a updated TWRP released, how would I go about updating the recovery?
Thanks a lot for the help anyone can give!
KyleStilkey said:
Hey All,
I'm looking for some help nito update this device to the latest OTA update. I have installed TWRP 3.0.2.0 that came with the dirtycow method. The device found the latest updated released in the past few days but when going to install it, it brings up the TWRP (which is how it should install). Now I don't mind if I can't grab this latest version due to whatever reason, but how would I go about updating the device? Currently it's running the stock version 6.1 6/17/2016.
Sorry if this has been answered somewhere, but still kinda new with Android devices and the whole rooting process. I'd like to be able to keep TWRP if at all possible and keep this device updated. Also I saw there was a updated TWRP released, how would I go about updating the recovery?
Thanks a lot for the help anyone can give!
Click to expand...
Click to collapse
As long as you have twrp installed, you can install the modified update 8.3 i just finished.
==>>it is here
mrmazak said:
As long as you have twrp installed, you can install the modified update 8.3 i just finished.
==>>it is here
Click to expand...
Click to collapse
Already tried it and it doesn't work. She uses the phone to play Pokemon Go and sadly the modified version you've made gives the error that the device or software is not supported. I believe this is due to the method you are using to remove the ads and custom changes made to the ROM, which I don't personally care if the phone has them or not. I'm wanting to install OTA updates without any heavy modifications made, just the ability to keep TWRP but have an updated phone.
KyleStilkey said:
Already tried it and it doesn't work. She uses the phone to play Pokemon Go and sadly the modified version you've made gives the error that the device or software is not supported. I believe this is due to the method you are using to remove the ads and custom changes made to the ROM, which I don't personally care if the phone has them or not. I'm wanting to install OTA updates without any heavy modifications made, just the ability to keep TWRP but have an updated phone.
Click to expand...
Click to collapse
Will be redoing the patch again and making not pre-rooted version. But if your app is not working on the modified 7.4.2 there is nothing I can do.
mrmazak said:
Will be redoing the patch again and making not predicted version. But if your app is not working on the modified 7.4.2 there is nothing I can do.
Click to expand...
Click to collapse
I see V8 but do not see a 7.4.2 on there.
EDIT: Nevermind I found it, will try the modified 7.4.2 and get back to you.
KyleStilkey said:
I see V8 but do not see a 7.4.2 on there.
EDIT: Nevermind I found it, will try the modified 7.4.2 and get back to you.
Click to expand...
Click to collapse
Non-rooted rom finished. uploaded to android file host.
Link and description in my other post.
==>>Unrooted rom
mrmazak said:
Non-rooted rom finished. uploaded to android file host.
Link and description in my other post.
==>>Unrooted rom
Click to expand...
Click to collapse
I want to say thank you a lot, this worked wonderfully! Only issue is Google Plus doesn't work (not a huge deal for the wife) but everything else is working great!
One last question, what is the recommended TWRP to use with this phone, I currently have the 3.0.2.0 Vampire version installed.
KyleStilkey said:
I want to say thank you a lot, this worked wonderfully! Only issue is Google Plus doesn't work (not a huge deal for the wife) but everything else is working great!
One last question, what is the recommended TWRP to use with this phone, I currently have the 3.0.2.0 Vampire version installed.
Click to expand...
Click to collapse
I have seen it mentioned that Google + does not work on 8.3 in general not just this modified one.
That recovery is the one I use and has advantage over the other one (lopestom's versio) in that in recovery you can use external sdcard and also mtp connection.
Here's my situation:
My phone's original build number is VTR-L29-C63C6 but I flashed the Oreo update for European units which is 8.0.0.046(01BN). So there are quite a few features that's not working for me and I wanted to flash my region's update instead. But whenever I'm on the process of having the TWRP installed, I always get an error message saying: FAILED (remote: partition length get error). Currently stuck due to this. I hope someone could help me out here on how I could flash the TWRP again on my phone. Would really appreciate it. Thank you!
Rb101093 said:
Here's my situation:
My phone's original build number is VTR-L29-C63C6 but I flashed the Oreo update for European units which is 8.0.0.046(01BN). So there are quite a few features that's not working for me and I wanted to flash my region's update instead. But whenever I'm on the process of having the TWRP installed, I always get an error message saying: FAILED (remote: partition length get error). Currently stuck due to this. I hope someone could help me out here on how I could flash the TWRP again on my phone. Would really appreciate it. Thank you!
Click to expand...
Click to collapse
Ok PM AND I'll help you
fairyland4ever said:
Here is the solution (forwad)
This is TWRP to Mate 9/Android O, brought to you by FunkyHuawei. This will also work for the Mate 10, Mate 10 Pro, Mate 10 Porsche and other EMUI 8 devices.
It´s just a preliminary build so I can´t promise anything/everything will work! Keep that in mind. I´m not responsible if you brick your device.
DOWNLOAD LINK:
It works on the Android O build here:
and the official European beta.
To install:
First, have Android O running. Unlock the bootloader. Download the twrp image.
Then, run in fastboot mode:
fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img
Then, reboot holding volume up, and you´ve got TWRP!
Note: With the Android O update, it is no longer possible to flash the recovery2 partition. Furthermore, the names of the partitions have changed. Please keep that in mind, and don´t mess around too much with TWRP, to be sure you don´t brick your system!
Click to expand...
Click to collapse
I have a similar problem.
I had VTR-L09C02B159 which I've rooted and tried to put the VTR-L09C900B311 Oreo on. Due to inexperience I've ended up with 8.0.0.046(01BN) version I don't know how to get rid of.
After a lot of searching I've managed to put TWRP back on using the method quoted above but I'm stuck here.
Ideally, I'd like to rebrand my phone to C432 and I'd be happy to rollback to Android 7 for now. I feel like I could rollback if I was on C432, or rebrand if I was on Android 7, easily, but no clue how to do both. Any ideas how to proceed?
Thank you
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
AbhiM7 said:
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
Click to expand...
Click to collapse
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
hellcat50 said:
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
Click to expand...
Click to collapse
Hi, I've already downloaded this very stable file and tried flashing using TWRP
AbhiM7 said:
Hi, I've already downloaded this very stable file and tried flashing using TWRP
Click to expand...
Click to collapse
I read something about wrong batteries causing this problem. Do you use the original battery?
hellcat50 said:
I read something about wrong batteries causing this problem. Do you use the original battery?
Click to expand...
Click to collapse
I though of running a diagnosis check by dialing *#808# and looked up Charger option, it shows the battery as "itech_3000mah"
is that original?
I had given the phone to repair for water damage to a professional service chain (Not OnePlus, some company here called Yaantra). I've heard from talking to an official repair person of OnePlus that fake batteries are not possible for OnePlus.
The battery works absolutely alright, charges up nicely and I get decent SOT. Can't complain at all.