Database Develop

Win7 driver Wifi (Marvell sd8686)

Hi,
I've done a clean install of win7 ultimate. I got all the drivers installed but can't get the wifi driver to run. Installed the vista driver: no luck.. got an upgrade from HTC: no luck..
I havent seen any other comments on this so am I the only 1?
Hope some1 can help me get this sorted..
cheers, Flummie

did you turn it on in the comm manager? have you tried to update the driver from device manager?

hi dr.5,
the driver cant be installed so im afraid there is no wifi to turn on or driver to update in dev. manager..
dr.5 said:
did you turn the wifi on? have you tried to update the driver from device manager?
Click to expand...
Click to collapse

then what happened when you run the ....\Marvell Wifi driver(8[1].114.123.139)\WifidrvpatchV1.1\setup.exe?
ps: the Marvell Wifi driver(8[1].114.123.139).zip was downloaded from HTC homepage, I installed the driver without any problem.

Solved
it just ran but after restart the driver was gone..
but.. I've solved it the hard way: went back to vista, installed the driver and the update and upgraded to 7.. now everything is fine..
so I would suggest: use the upgrade function and not the clean install option..
thx for the help
dr.5 said:
then what happened when you run the ....\Marvell Wifi driver(8[1].114.123.139)\WifidrvpatchV1.1\setup.exe?
ps: the Marvell Wifi driver(8[1].114.123.139).zip was downloaded from HTC homepage, I installed the driver without any problem.
Click to expand...
Click to collapse

[Q] hspl problem - error 260: Connection

Hi,
as the title suggests I have problem flashing HSPL. I've already done everything the original thread says when encountering USB problems e.g. other USB port or cable. I have also installed the "enablerapinew.cab" and used both manual and automatic mode of "Topaz-HardSPL_V5_09R6.exe". I have tried using "SSPL-Manual-TopazV5_09.exe" as well.
I already created a ticket adressing that problem a few days ago but haven't received any answer yet. (Ticket #458139)
The result ALWAYS is that as soon the phone shows the SSPL screen - no matter how it was brought to that state - the connection to the PC is lost. Windows Mobile Center then shows it as not connected. Before that it was always connected and synced perfectly fine. As a result I get "Error 260: CONNECTION".
I have Win 7 Pro 64x and no access to an XP PC.
Would be great if anyone could help since I have no idea what else I can try to make it work.

you need drvupdate-amd64 to be able to reconnect the device to the PC

Hakim Rahman said:
you need drvupdate-amd64 to be able to reconnect the device to the PC
Click to expand...
Click to collapse
When I try to install the file, it says I already have a newer version installed. Do I need to uninstall the version I have to be able to install this one or does that mean I have a different problem?
EDIT:
I downloaded the most recent version from Windows' Homepage and it worked!! Problem solved, thank you very much

Windows 8 Android USB Drivers for IncS?

I recently got Windows 8 its awesome BUT, when I connect my phone it says USB device not recognized. I know this is from drivers but i have the latest. Yes I went and got it from HTC's website along with HTC Sync but i still get the error. I cant get to my sd card or anything because of this and it REALLY sucks! i looked else where for the drivers but nothing works. Any help any1 please and thnx?

as far as i know, windows 8 can use any driver from windows 7 or vista. maybe u need to install it manually from device manager.
btw i never use win8, so i think its the same process to install driver
Sent from my HTC Incredible S using Tapatalk 2

I went to the device manager and uninstalled the device and the next time i connected it it installed the drivers fine. I dont know what the hell i did the first time i plugged it in but i clearly didnt let it install. Anyway thanks for the help, it was probably just a stupid mistake

RoughRunner said:
I recently got Windows 8
Click to expand...
Click to collapse
Seems like you got bad luck I'd prefer an OS (operating system), not a CS (crash system)
SCNR

Check this post out, see if it helps you
http://forum.xda-developers.com/showpost.php?p=28835191&postcount=14

i use windows 8 and i haven't any problem with it BUT i can't use internet pass strogh (i use venom viper 1.0.0 and htc sync manager)

I use windows 8 pro and haven't got any problem.
Everything is working fine , Try plugging into different port.

Amar-S said:
I use windows 8 pro and haven't got any problem.
Everything is working fine , Try plugging into different port.
Click to expand...
Click to collapse
what rom u use?? and version of htc sync or htc sync manager??

Amar-S said:
I use windows 8 pro and haven't got any problem.
Everything is working fine , Try plugging into different port.
Click to expand...
Click to collapse
Ya me too everything is fine
husky69 said:
Seems like you got bad luck I'd prefer an OS (operating system), not a CS (crash system)
SCNR
Click to expand...
Click to collapse
You dont know what your missing if your mind is set at that bro
MA52 said:
Check this post out, see if it helps you
http://forum.xda-developers.com/showpost.php?p=28835191&postcount=14
Click to expand...
Click to collapse
Thanks im fixed now

[Q] Teclast X98 Air 3G: Semi-brick

Hello XDA!
I Pray for Help
I have a tablet: Teclast X98 Air 3G 32GB C9J8.
- It all started with the fact that when you install Windows 10 I formatted all partitions.
- Windows 10 install. Everything worked well, except for the battery. The battery not charging while working in Windows.
- It was decided to return the Android OS. But it was not there. I was not able to install android through Manufacturing Flash Tool, because the partitions have been deleted.
- For a long time I was looking for ways to solve this problem, but the solution I not found.
- Well, to hell with it with android - I said. But the problem is that while I was looking for a solution to this problem - I created another problem:
Now tablet not booting to Windows 10. After turning immediately goes into the BIOS. And when I try to run the install from a flash - nothing happens.
- I tried to boot from a live usb, but no result.
- I think something happened to the EMMC.
- But there are two workable options: EFI SHEll and WinPE5_TechAdmin_UEFI.
- EFI Shell works, but does not allow to load the installation Windows with usb flash by running and bootia32.efi or bootx64.efi.
- WinPE5_TechAdmin_UEFI: Run the menu with different options:
- Installation
-diskpart
- Acronis
- etc.
Windows installation runs but produces different error types: ACPI_Bios_Error or 0xc0000XXX - winload.efi
Acronis starts, but after entering my tpad hangs.
- Who can recommend?

Hello mate . Any changes? Did you fix it ? I got techlast x98 3g 64 gb fully working maybe i can help you with somethig to take my os to upload on a server . Maybe you can fix it . I have no ideea . Just trying to help

Hi everyone.
Any idea or problem solution?

Nothing happened in the meantime ?
I am in more or less the same situation. So I liked to hear what now is yours.

I am in the same situation as you, i cannot boot from any usb device, i also tried booting from the efi shell but of course i had to same problem as you. At least i still have my android 5.0 rooted that works fine but i would like my windows to also work
I have tried a lot of things but am also nearing a wall and was just about to make a similar thread as you.
Edit: My situation is not exactly the same as you as my windows 8.1 is not working instead of win10... When i try booting into windows 8.1 i instead get a blue screen and get to the recovery options for windows 8.1, but none of the options work. Of course i can use the CMD option but chkdsk and similar commands don't help

Have you tried to flash a custom android rom like mireks?
http://forum.xda-developers.com/showpost.php?p=62823666&postcount=9
With the windows manufacturing tool you can repartition your tablet. Maybe give it a try

Crazy_Oni said:
Have you tried to flash a custom android rom like mireks?
http://forum.xda-developers.com/showpost.php?p=62823666&postcount=9
With the windows manufacturing tool you can repartition your tablet. Maybe give it a try
Click to expand...
Click to collapse
My android is already running Mireks Rom Rooted. I'll guess i have to repartition indeed, i'll do this today and let you guys know tomorrow.

trylone said:
My android is already running Mireks Rom Rooted. I'll guess i have to repartition indeed, i'll do this today and let you guys know tomorrow.
Click to expand...
Click to collapse
And what happend? did it work?

Crazy_Oni said:
And what happend? did it work?
Click to expand...
Click to collapse
Sorry i was a little busy and lazy >.< .. I've set a notification in my phone and will be sure to do it tomorrow, now i'm going to bed reading novels on my teclast :3

Teclast X98 Air III 32GB Android version - Install Windows 10

Hey guys,
my x98 Air III will arrive in the next couple of days and I plan to run Windows 10 on it. i got the 32GB Android only version and hope since there is a 64GB dual boot version that the bios isn't locked and I can boot from USB. Has anyone tried this already?

mrchrister said:
Hey guys,
my x98 Air III will arrive in the next couple of days and I plan to run Windows 10 on it. i got the 32GB Android only version and hope since there is a 64GB dual boot version that the bios isn't locked and I can boot from USB. Has anyone tried this already?
Click to expand...
Click to collapse
http://techtablets.com/2015/09/teclast-x98-air-iii-gets-dual-boot-bios-and-files-released/

i want to give it a try but i'm a bit scared i mess up my shiny new tablet...
i found some more info and it looks like it should be possible to turn my tablet into a dual booting device. The 32GB version that I have is M5C5
http://bbs.teclast.com/thread-518225-1-1.html
i just connected a powerd hub and put teclast win10 on an external usb stick. i interrupted the boot by hitting esc on boot, tried to launch from usb, but it didnt work..

Ordered mine yesterday. My plan is also to put Win10 on it, so I'm collecting info/files on how to do it. Maybe Chris from TechTablets will make a video of the process before mine arrives?

he just released a review: http://techtablets.com/2015/11/teclast-x98-air-iii-review/

I've managed to install the dual boot bios on my Air III, but couldnt figure out why flashing was failing. Every time it would go to 10% and fail (when using that Intel's flash tool).

So how did you make it work? Could you post some instructions?

I was succeeded flashing dual boot bios,
and re flashing android 10G patition .
however, I cant boot windows to install it.
dual booting mod didn see windows logo.
I trid to make a booting USB, winpe USB.
didn work out.

zukera said:
I was succeeded flashing dual boot bios,
and re flashing android 10G patition .
however, I cant boot windows to install it.
dual booting mod didn see windows logo.
I trid to make a booting USB, winpe USB.
didn work out.
Click to expand...
Click to collapse
Im at that stage now as well. I couldnt flash the rom automatically so I had to manually input the fastboot commands. Got few things to try in regards of delpoying Windows on it, but that will have to wait until I get home though.
I will put together a guide once I manage to get Windows working, hopefully sooner rather than later

arczi19 said:
Im at that stage now as well. I couldnt flash the rom automatically so I had to manually input the fastboot commands. Got few things to try in regards of delpoying Windows on it, but that will have to wait until I get home though.
I will put together a guide once I manage to get Windows working, hopefully sooner rather than later
Click to expand...
Click to collapse
thank for ur reply
I was installed windows 10, today.
I tried orignal teclast x98 air III dual files to install it.
it works.

zukera said:
thank for ur reply
I was installed windows 10, today.
I tried orignal teclast x98 air III dual files to install it.
it works.
Click to expand...
Click to collapse
How did you manage to install Windows? Can you provide links to files needed to install it?

I'm pretty happy with Android right now, but I wonder if the UI response is more snappy under W10. I already have a USB prepared with the Teclast W10 version. Just waiting for instructions on how to flash bios etc..

I have done a clean Windows 10 Home 32bit (TH2 1511) install and use the driver package from HERE.
All works fine yet but i know one issue with screen brightness:
When i tap the brightness icon (with 25-100%) there came a point with 0% brightness and i tick it and the screen was off and no chance to find the right button without screen
I restart the tab with 15sec. power button but after the short welcome screen, the screen goes back to dark.
So i must use a keyboard and start the tab in rescue modus and set the power managment to "standard". After this the screen was on after next restart.
My question: is it possible to delete the 0% entry in screen brightness?

zukera said:
I was succeeded flashing dual boot bios,
and re flashing android 10G patition .
however, I cant boot windows to install it.
dual booting mod didn see windows logo.
I trid to make a booting USB, winpe USB.
didn work out.
Click to expand...
Click to collapse
How did you manage update BIOS? Did you flash it from Windows PC with USB Debugging enabled or from EFI Shell? My Windows desk cannot find Air III, it says 'no devices found'.

I have managed to put windows on it, by downloading all the files directly from Teclast forums. However, windows is in Chinese and I cant seem to change the language to anything else. Everytime I download a new language, it fails without oving me a reason any suggestions what to do?

arczi:
if you let me know how you flashed the bios and which files you used for the install, i will put it on my tablet as well and we can figure it out together

arczi19 said:
I have managed to put windows on it, by downloading all the files directly from Teclast forums. However, windows is in Chinese and I cant seem to change the language to anything else. Everytime I download a new language, it fails without oving me a reason any suggestions what to do?
Click to expand...
Click to collapse
Download it it directly from the Microsoft with the ISO file in the language of your choice. :angel:

Mikha777 said:
Download it it directly from the Microsoft with the ISO file in the language of your choice. :angel:
Click to expand...
Click to collapse
Thanks, did that and all is fine now. Only trouble was none of the drivers were included in the official ISO files, so I had to manually install a lot of things. The file that can be downloaded directly from teclast is optimized and preconfigured with all the drivers that are needed.
mrchrister said:
arczi:
if you let me know how you flashed the bios and which files you used for the install, i will put it on my tablet as well and we can figure it out together
Click to expand...
Click to collapse
First of all get this: http://pan.baidu.com/s/1kTyAH2f
Secondly, follow this tutorial to install all necessary drivers and tools: http://forum.xda-developers.com/showpost.php?p=62823535&postcount=5
Thirdly, manually edit "Update_Android.bat" file (comes with a package that you have downloaded as the first step) to make sure that all file paths are correct - most importantly the 4th line of this wile, where it points to Intel Manufacturing Flash Tool. Also make sure that there are no Chinese characters in any of the file paths.
Lastly, run "Update_Android.bat" and follow the instructions there I've found that unless you get everything right (all file paths and tool) there isnt much risk of something going wrong, as nothing will actually happen.

thanks for the info! just installing windows 10 on my m5c5 32gb air iii right now, seems to work bios flash was easy and painless. after flashing it took a while for the tablet to power back on. it also didnt see my win10 install usb stick at first. after a few trial and error attempts it eventually booted into windows install.
I'm installing stock windows. which drivers did you use to get the tablet fully working? right now I'm getting the July 2015 Air 3g Windows 10 drivers from techtablets

I have used the same package, majority of drivers can be downloaded using Windows, but there are some missing and thats where the package comes in useful.