FLashed Wrong ROM (downgraded) - G 2014 Q&A, Help & Troubleshooting

Hello everyone,
I have a XT1079 and I made the mistake of flashing 1069´s ROM. Now I can´t install a custom rom and adb does not recognize my device (it is listed as 1069 with a question mark on the icon in device manager).
Any ideas for help me will be appreciated, thanks a lot.

If your phone is able to go into recovery , you just flash the stock firmware again or flash flashable zip of the stock ROM ( or may be some custom ROM (i'm not sure though)). This will kind of reset your phone and it will work again. But as you said, You have downgraded your phone, you need to check out which one to flash ...i mean whether to flash kitkat or lollipop version.

Custom ROM
andromuks said:
If your phone is able to go into recovery , you just flash the stock firmware again or flash flashable zip of the stock ROM ( or may be some custom ROM (i'm not sure though)). This will kind of reset your phone and it will work again. But as you said, You have downgraded your phone, you need to check out which one to flash ...i mean whether to flash kitkat or lollipop version.
Click to expand...
Click to collapse
Problem is that the stock rom does not come in a zip file and I receive downgrade error msg when I try to flash via mfastboot. But I want to use Cyanogenmod ROM. Thanks again.

GeekMaga said:
Hello everyone,
I have a XT1079 and I made the mistake of flashing 1069´s ROM. Now I can´t install a custom rom and adb does not recognize my device (it is listed as 1069 with a question mark on the icon in device manager).
Any ideas for help me will be appreciated, thanks a lot.
Click to expand...
Click to collapse
install motorola device manager 2.5.4 .exe for fastboot drivers for all motorola's and see if ADB recognises it then?

GeekMaga said:
Hello everyone,
I have a XT1079 and I made the mistake of flashing 1069´s ROM. Now I can´t install a custom rom and adb does not recognize my device (it is listed as 1069 with a question mark on the icon in device manager).
Any ideas for help me will be appreciated, thanks a lot.
Click to expand...
Click to collapse
If you flashed XT1069 motoboot.img then you're simply screwed as you won't be able to connect to mobile network.

One more try
LuK1337 said:
If you flashed XT1069 motoboot.img then you're simply screwed as you won't be able to connect to mobile network.
Click to expand...
Click to collapse
I sent to a technician to restore stock firmware and I will follow the tutorial here in the forum for the right model. Closing thread.

Solved for now
reefuge said:
install motorola device manager 2.5.4 .exe for fastboot drivers for all motorola's and see if ADB recognises it then?
Click to expand...
Click to collapse
Too late but thanks anyway I sent it to a local cell phone repair shop. After that I will follow the tutorial here to install rom and google apps thank you very much.

Man it´s never too late for android
I solved the first part. I was using titan files and for XT1078 the correct one is thea. Problem now is that none of the sim cards are recognized by the firmware. Any ideas guys
I used twrp (mfastboot flash recovery <file_name>. and it´s interface it is pretty friendly. Also installed google apps zips. It is amazing how much you can customize with this ROM.

GeekMaga said:
I solved the first part. I was using titan files and for XT1078 the correct one is thea. Problem now is that none of the sim cards are recognized by the firmware. Any ideas guys
Click to expand...
Click to collapse
you have a xt1079 right? stop flashing WRONG files until you get correct xt1079 firmware - please tell us what you originally had on phone and we will try to find it for you.
I cant seem to find any brazil xt1079 firmwares - yet - you have no signal due to incorrect radio/modem files - only can find xt1079 retcn files this modem / radio combo will be wrong - yours will become available but may take months to appear.....
THIS is why we backup our stock roms with TRWP to include the PDS area

Related

[Help needed] Semi-bricked Milestone

Hi all,
prior to any comment, yes, i know there are already posts on this issue, however looking through them didn't help at all unfortunately.
I have a Moto Milestone, origin is Israel.
somewhere along the way i've updated the bootloader to 90.78 and since then - the phone is stuck in the notorious loop and cannot restart the OS.
Tried already to reflash the phone without luck using RSD Lite (downloaded the SBF through http://and-developers.com/sbf:milestone - the 'official' Cellcom IL SBF that was there...)
anyway - i can still access the bootloader which tells me the phone is not fully bricked, however i can't seem to find any proper SBF so it'll reflash itself back to an operative state.
One major problem here - the phone won't get into recovery mode (i've tried all the combinations i know and that have worked before)
i've also read about wiping the cache and user data however - as far as i know, this can only be done by entering the recovery mode, right?
one last resort i've tried - trying to split the SBF and reconstructing it - still no joy.
does anyone here have any advice or solution o this issue? what kind of SBF do i need? how to manually reconstruct the SBF with proper files? etc.
Thanks in advance,
Tomer
Have you tried loooking into fastboot?
Sometimes a phone wont respond to to adb commands and the recovery is corrupted, but you can still flash partitions using fastboot. I "saved" a Moto dext in this fashion once. Cant remember the exact commands, but it was similar to the adb flash commands. I reflashed the recovery partition and then used recovery to flash a ROM in update.zip format. For some reason RSD lite was failing on this phone.
Just something you may want to look into if you are desperate about saving your MS.
Sent from my Milestone using XDA App
Caz666 said:
Have you tried loooking into fastboot?
Sometimes a phone wont respond to to adb commands and the recovery is corrupted, but you can still flash partitions using fastboot. I "saved" a Moto dext in this fashion once. Cant remember the exact commands, but it was similar to the adb flash commands. I reflashed the recovery partition and then used recovery to flash a ROM in update.zip format. For some reason RSD lite was failing on this phone.
Just something you may want to look into if you are desperate about saving your MS.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Hi Caz666,
well, thought this might actually work, but had no luck.
when i try to flash my phone it does nothing other than showing me 'downloading boot.img' and thats it.
is there anything else to do in order to save my phone? i really like it
I'm also willing to donate through PayPal to anyone who can describe any working method or that can point me to any valid working process...
thanks again.
barvaz_t said:
Hi Caz666,
well, thought this might actually work, but had no luck.
when i try to flash my phone it does nothing other than showing me 'downloading boot.img' and thats it.
is there anything else to do in order to save my phone? i really like it
I'm also willing to donate through PayPal to anyone who can describe any working method or that can point me to any valid working process...
thanks again.
Click to expand...
Click to collapse
are you sure your drivers for the phone are installed properly? what RSD lite version are you using? What system? windows 32 or 64 bits?
vladstercr said:
are you sure your drivers for the phone are installed properly? what RSD lite version are you using? What system? windows 32 or 64 bits?
Click to expand...
Click to collapse
I'm quite sure they're installed properly as i managed to upgrade my bootloader version using the RSDlite.
my system is 32 bits and the drivers are the ones i installed throught the Motorola website. I've first used RSDlite 4.6 but after reading a bit I understood there are some differences between versions hence upgraded to 4.9.
barvaz_t said:
I'm quite sure they're installed properly as i managed to upgrade my bootloader version using the RSDlite.
my system is 32 bits and the drivers are the ones i installed throught the Motorola website. I've first used RSDlite 4.6 but after reading a bit I understood there are some differences between versions hence upgraded to 4.9.
Click to expand...
Click to collapse
Try the 90.78ch bootloader from http://and-developers.com/sbf:milestone ...
"XT702 variant of the 90.78 bootloader (notes from 90.78 apply here too).
It's reported to work on the A853 too. "
You've got nothing to loose on trying this. Let me know!
vladstercr said:
Try the 90.78ch bootloader from http://and-developers.com/sbf:milestone ...
"XT702 variant of the 90.78 bootloader (notes from 90.78 apply here too).
It's reported to work on the A853 too. "
You've got nothing to loose on trying this. Let me know!
Click to expand...
Click to collapse
*** [update]
I'm now on 90.78ch and see no difference whatsoever.
I've now started investigating how to re-compile an older SBF file so it'll contain the new RAMDL
(I want to flash the Brazilian version however it contains only 90.74 RAMDL)
I've compiled a new file, however the checksum is incorrect.
How it is possible to recompile this properly?
Already tried the website, the mirror there is no leading to the bootloader itself but to a wiki site.
i've tried searching almost anywhere i know, but this bootloader is non available to download.
if there's another mirror site such as rapidshare or megaupload - i'd be happy to be pointed towards it..
Hi barvaz_t!
barvaz_t said:
...
somewhere along the way i've updated the bootloader to 90.78 and since then - the phone is stuck in the notorious loop and cannot restart the OS.
...
Click to expand...
Click to collapse
Why did you upgrade the bootloader
barvaz_t said:
...
i've also read about wiping the cache and user data however - as far as i know, this can only be done by entering the recovery mode, right?
...
Click to expand...
Click to collapse
Right, is it possible to boot into recovery on your device by holding 'X' button?
barvaz_t said:
*** [update]
I'm now on 90.78ch and see no difference whatsoever.
I've now started investigating how to re-compile an older SBF file so it'll contain the new RAMDL
(I want to flash the Brazilian version however it contains only 90.74 RAMDL)
I've compiled a new file, however the checksum is incorrect.
How it is possible to recompile this properly?
Click to expand...
Click to collapse
You locked yourself out by upgrading the bootloader to the latest one.
Neither downgrade of bootloader would be possible, nor flashing older firmware SBF's.
Apart from that the milestone uses signature check on certain parts of the firmware. I really doubt that it's possible to tweak/recompile a complete SBF.
Something worth to try, is to flash vulnerable recovery SBF from within bootloader mode using RSDlite.
Here's the link to gitorious: http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
If the link does not work for you, there are also some mirrors of this file floating around. Just search!
I guess this should work, because the recovery SBF is using RAMLDR 90.78 (do know about the sign check during flash, but i guess checksum should be O.K.).
With vulnerable recovery properly installed, you might then use OpenRecovery to check your system and restore to some working state.
Good luck!
scholbert
scholbert said:
Hi barvaz_t!
Why did you upgrade the bootloader
Right, is it possible to boot into recovery on your device by holding 'X' button?
You locked yourself out by upgrading the bootloader to the latest one.
Neither downgrade of bootloader would be possible, nor flashing older firmware SBF's.
Apart from that the milestone uses signature check on certain parts of the firmware. I really doubt that it's possible to tweak/recompile a complete SBF.
Something worth to try, is to flash vulnerable recovery SBF from within bootloader mode using RSDlite.
Here's the link to gitorious: http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
If the link does not work for you, there are also some mirrors of this file floating around. Just search!
I guess this should work, because the recovery SBF is using RAMLDR 90.78 (do know about the sign check during flash, but i guess checksum should be O.K.).
With vulnerable recovery properly installed, you might then use OpenRecovery to check your system and restore to some working state.
Good luck!
scholbert
Click to expand...
Click to collapse
Thanks Scholbert for the detailed answer.
the link you gave directs to an image the RSDlite cannot flash (=error validating image).
If your interntion was that I'm supposed to flash the vulnerable recovery only, than bad news - It's already 'installed' on my device (and it shows no error whatsoever during this installation..)
Well, thanks again for trying to help, I think I'm officially out of suggestions or options here unless anyone can give further advice...
barvaz_t said:
...
If your interntion was that I'm supposed to flash the vulnerable recovery only, than bad news - It's already 'installed' on my device (and it shows no error whatsoever during this installation..)
...
Click to expand...
Click to collapse
So can you still enter recovery?
Regards,
scholbert
No, never did (since the upgrade)
If I had access to the recovery i would have at least managed to install OpenRecovery or something and manage to reflash the device
barvaz_t said:
Hi Caz666,
well, thought this might actually work, but had no luck.
when i try to flash my phone it does nothing other than showing me 'downloading boot.img' and thats it.
is there anything else to do in order to save my phone? i really like it
I'm also willing to donate through PayPal to anyone who can describe any working method or that can point me to any valid working process...
thanks again.
Click to expand...
Click to collapse
Did you try to fastboot flash only the boot.img? What about recovery? I seem to remember flashing a recovery.img on the dext...but this was last year. I may be wrong but i believe i flashed only a recovery image and then was able to access the recovery (which would allow all sorts of additional goodies).
I find it strange that fastboot reports only downloading. I seem to remember some error messages and timeouts?
Sent from my Milestone using XDA App
Caz666 said:
Did you try to fastboot flash only the boot.img? What about recovery? I seem to remember flashing a recovery.img on the dext...but this was last year. I may be wrong but i believe i flashed only a recovery image and then was able to access the recovery (which would allow all sorts of additional goodies).
I find it strange that fastboot reports only downloading. I seem to remember some error messages and timeouts?
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Nope.
trying to flash the recovery / boot images only results in the message 'downloading...' and nothing (waited for like 3 hours..)
when I terminate the action by Ctrl+C and then trying again - the message is instantly 'FAILED..' along with specification that the action of sending the command has failed.
I'm literaly out of ideas, don't know what to do..
Sent from my Milestone using XDA App
I am starting to think that there is something wrong with your device (like broken hardware).
In all my experimenting with rsd/fastboot, i did not once get a "hang". I would get checksum/signature errors, size errors, etc...but i always got some type of error code or status.
This is on 3 different Mot devices that run Android.
Sorry
Sent from my Milestone using XDA App
Caz666 said:
I am starting to think that there is something wrong with your device (like broken hardware).
In all my experimenting with rsd/fastboot, i did not once get a "hang". I would get checksum/signature errors, size errors, etc...but i always got some type of error code or status.
This is on 3 different Mot devices that run Android.
Sorry
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
The device was working fine before upgrading the bootloader, so it seems that this is not a hardware issue.
Either way - guess i'll be taking it to a lab and let them figure this out..
idea
is the milestone n droid from usa same sbf file used if so i have the right sbf file i found i had couple times i had to reinstall to stock if u want to try it i can email it it work for me saved me from bricks its rooted phone just fyi
streetracer89101 said:
is the milestone n droid from usa same sbf file used if so i have the right sbf file i found i had couple times i had to reinstall to stock if u want to try it i can email it it work for me saved me from bricks its rooted phone just fyi
Click to expand...
Click to collapse
@streetracer89101 - no, as far as i know Droid and Milestone use different firmware so it won't help unfortunately. Not that it would matter if I did flash my device - it's not like I can use it anyway..
Thanks again for trying to help out
Tomer
90.78ch bootloader
Hello, I really need the bootloader 90.78ch maybe you can me it someone give Many Thanks
300zxtt said:
Hello, I really need the bootloader 90.78ch maybe you can me it someone give Many Thanks
Click to expand...
Click to collapse
Attached. Enjoy

O2 ruu 1.206.17.1

Hello,
Anyone can provide me this official rom?
Sent from my Lumia 920 using Board Express
Problem solved :good:
zeka1974 said:
Problem solved :good:
Click to expand...
Click to collapse
You might wanna post the solution to help others that might be searching and an answer...
Of course
The problem was that I only had unlocked bootloader.
Forgot to root the phone in order to install other roms.
Today with more time checked a few forums and see the missing actions.
Installed TWRP 2.5.0.0 and after that installed Superuser.
after all that is done just paste the ROM (European Unbranded) to the phone; entered bootloader mode, recovery, wipe all data and after that install this rom.
All went fine for now.
Sounds like you just installed a rom zip in recovery and not actually flash an RUU.
A RUU, or Rom Update Utility, is a self extracting stock software package, a lot of times including complete images (with radio, etc) that wipe data or patches.

[REQUEST] TWRP/CWM Backup of Lollipop

Hey guys i just a thread in the Android Development forum about a guy possibly making Lollipop work on many devices! It is a great news and can someone upload the CWM/TWRP Backup here? Needed to make a flashable zip!!
I actually need this kinda backup too. Whenever I try to flash this http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-11-6-android-t2939881 via stock recovery, it says "/system/lib/hw/sensort.MSM8226.so" has unexpected contents.
I'm trying hard to find a way on how to make a flashable zip, no luck though...
savnex said:
I actually need this kinda backup too. Whenever I try to flash this http://forum.xda-developers.com/moto-g-2014/general/ota-moto-g-2014-xt1063-v22-11-6-android-t2939881 via stock recovery, it says "/system/lib/hw/sensort.MSM8226.so" has unexpected contents.
I'm trying hard to find a way on how to make a flashable zip, no luck though...
Click to expand...
Click to collapse
there are 2 sensors.msm8226.so files in the zip. the folder path is /patch/system/lib/hw/... open the zip delete it and ur done!
I reflashed stock for the third time and the update via stock recovery worked. Don't know what did the trick, but I have lollipop now lol.
savnex said:
I reflashed stock for the third time and the update via stock recovery worked. Don't know what did the trick, but I have lollipop now lol.
Click to expand...
Click to collapse
could u please take a twrp backup without including data and upload it somewhere and give me the link?
Follow this guide, it's easier http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340
savnex said:
Follow this guide, it's easier http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340
Click to expand...
Click to collapse
i dont own an G2 i own G1 wanna port this update to G1 and hence the sump request bro.
yeshwanthvshenoy said:
Hey guys i just a thread in the Android Development forum about a guy possibly making Lollipop work on many devices! It is a great news and can someone upload the CWM/TWRP Backup here? Needed to make a flashable zip!!
Click to expand...
Click to collapse
Hi, I uploaded a backup to Google Drive https://drive.google.com/open?id=0B-51lsOzTcp5amJuQklLZjBlckE&authuser=0
I make 2 backups, one with XT1063 firmware and the second with XT1064 firmware, boot with the build.prop edited to work with 2 SIMS.
Let me know if it works for you
luisjoseb said:
Hi, I uploaded a backup to Google Drive https://drive.google.com/open?id=0B-51lsOzTcp5amJuQklLZjBlckE&authuser=0
I make 2 backups, one with XT1063 firmware and the second with XT1064 firmware, boot with the build.prop edited to work with 2 SIMS.
Let me know if it works for you
Click to expand...
Click to collapse
working on it! boot.img issues!!
luisjoseb said:
Hi, I uploaded a backup to Google Drive https://drive.google.com/open?id=0B-51lsOzTcp5amJuQklLZjBlckE&authuser=0
I make 2 backups, one with XT1063 firmware and the second with XT1064 firmware, boot with the build.prop edited to work with 2 SIMS.
Let me know if it works for you
Click to expand...
Click to collapse
Can I use this on my XT104 running KitKat with an unlocked boot loader? Can I just copy it to my SD card and restore it without issue?
those xt1063 backups works with trwp custom recovery installed and the gsm global versio bought at USA?
No
luisjoseb said:
Hi, I uploaded a backup to Google Drive https://drive.google.com/open?id=0B-51lsOzTcp5amJuQklLZjBlckE&authuser=0
I make 2 backups, one with XT1063 firmware and the second with XT1064 firmware, boot with the build.prop edited to work with 2 SIMS.
Let me know if it works for you
Click to expand...
Click to collapse
Hi first off i wanna say thank you!
I have an XT1064 that was rooted and bootloader unlocked, i downloaded the right version and restored it using TWRP and it worked! I am now on 5.0 with out using any PC or anything..the only thing is i cant send a text...calls work fine just no text messages...can you help me? I also want to get rid of the dual sim feature as my phone only has one sim. Please help!
Okay so I tried to download and flash the OTA.zip for my phone and flash it through stock recovery and it aborts when verifying my current system because of the edited build.prop in this build. Is there any way to fix this without a PC? I don't have access to one right now. Feel free to PM me! Thank you XDA
Dual SIM Removal
Robertleehadley said:
No
Hi first off i wanna say thank you!
I have an XT1064 that was rooted and bootloader unlocked, i downloaded the right version and restored it using TWRP and it worked! I am now on 5.0 with out using any PC or anything..the only thing is i cant send a text...calls work fine just no text messages...can you help me? I also want to get rid of the dual sim feature as my phone only has one sim. Please help!
Okay so I tried to download and flash the OTA.zip for my phone and flash it through stock recovery and it aborts when verifying my current system because of the edited build.prop in this build. Is there any way to fix this without a PC? I don't have access to one right now. Feel free to PM me! Thank you XDA
Click to expand...
Click to collapse
Thanks for this Recovery. I really appreciate it. However, I am stuck with the phone thinking it's a Dual SIM phone.
How do I make it recognize that it's just one SIM Card.
Thanks.
Damionix said:
Thanks for this Recovery. I really appreciate it. However, I am stuck with the phone thinking it's a Dual SIM phone.
How do I make it recognize that it's just one SIM Card.
Thanks.
Click to expand...
Click to collapse
Sir..you will need to flash, via adb, the stock firmware for your device..then flash the 5.0 update zip via stock recovery..
sent from my
5.0_22.11.6 Lollipop
XT1064 Moto G (2nd Gen.)

[Q] Your opinion please for a M/B transplant.

Hi, recently i managed to brick my Korean F340L G Flex so bad. I've tried almost everything software wise.
-The solution:
I'm planning to change the logic board from a Sprint LS995 model. I think it will work ok. Of course I'll have to some how get an unlock code in order to use it in Greece where I live.
I've seen in ebay some users providing for a small amount of money this code.
So, what do you think. Will it work as I'm thinking? Any comments, suggestions, guides welcome. Thanks
Here is a short story:
"Hello, to all, I'd like to share my experience and problem with my LG G Flex, as a last hope to find a solution to unbrick it.
I know that the talk here is about G2's, but I saw many users reviving their Flexes with OP's method.
So here is what I did in steps:
1)I rooted my Lg g flex F340L
2)New OTA, downloaded, but failed to install after reboot. The message was no OTAs for rooted devises
3)Tried to unroot, but with no success. Still no installation of OTA.
4)Found, and flashed the stock F340L rom , (had an EFS backup), from another user here(.tot file), with LGFlashTool.
5)SIM card was not recognized any more (Greece, Vodafone), so no calls. Did all the updates, but no SIM, still.
6)Hard reset, still no SIM.
7)Decided to flash stock F340K kdz rom, and install CWR. All good, SIM detected, OTA downloaded, but after reboot stuck at CWM nenu. Whatever I do just CWM.
8)No download mode, or usb support, just an LG FLEX unknown device. Got some drivers only to be seen as lenovo ADB device.
9)I found the test point on the motherboard and short circuit it. Got a qhsusb_bulk(qualcomm 9008) under COM ports, but not on a specific port.
10) No flash capability, and no partitions to try and flash the 10 or so, images. Ubundu, no luck with the partition detection either.
11)After many reboots and button long presses the CRW came back...again
Well as I can see, there is not so much support for the korean variants and I might have destroyed my phone. So, I need your advise in changing the motherboard. I found M/B's from AT&T and Sprint variants, to install to my F340L. I think it will work. After I will purchase an unlock code from lets say ebay to unlock it to all GSM networks ( I live in Greece).
What is CRW or CWR?
Are you referring to CWM? The recovery?
If you can boot into cwm your phone has a chance to be saved no need to change the mb.
By the way sprint doesnt give out unlock codes like att. There is an specific process to sim unlock sprints variant.
Alex_XV6700 said:
What is CRW or CWR?
Are you referring to CWM? The recovery?
If you can boot into cwm your phone has a chance to be saved no need to change the mb.
By the way sprint doesnt give out unlock codes like att. There is an specific process to sim unlock sprints variant.
Click to expand...
Click to collapse
Yes sorry, CWM I was refering to. Well, since I have no other option at the moment. I'll try to find that specific process you've mentioned when I get the board(help or hint welcome)
As, for the M/B change, no system partitions are recognized in order to flash individual .images to unlock them.
If you can access CWM you dont need to flash the .img files for your phone. Instead you could flash a stock zip through adb sideload or flash twrp through sideload too. Twrp allows MTP use so someone using an F340K can help you with a stock backup and you can unbrick instead of changing board.
Alex_XV6700 said:
If you can access CWM you dont need to flash the .img files for your phone. Instead you could flash a stock zip through adb sideload or flash twrp through sideload too. Twrp allows MTP use so someone using an F340K can help you with a stock backup and you can unbrick instead of changing board.
Click to expand...
Click to collapse
The only stock image I have is in .TOT file for the L variant. I also have stock .kdz file for the K variant. I can sideload to /sdcard/0/ directory only, if that helps. I'll try to find twrp.zip and try it. But the main problem is to find stock rom in .zip format.
I've managed to install twrp 2.8.0.0...
N3M3SYS said:
I've managed to install twrp 2.8.0.0...
Click to expand...
Click to collapse
Ok
now you could try to flash this rom.
let me know how it goes.
Alex_XV6700 said:
Ok
now you could try to flash this rom.
let me know how it goes.
Click to expand...
Click to collapse
Thnx for the link, but this rom says is for F340K, I have a F340L. In addition the download link is not working...
N3M3SYS said:
Thnx for the link, but this rom says is for F340K, I have a F340L. In addition the download link is not working...
Click to expand...
Click to collapse
Ok, this will take time friend.
I will try to make you a flashable zip of stock F340L KK.
Maybe it will take me some 4 or 5 hrs.
Alex_XV6700 said:
Ok, this will take time friend.
I will try to make you a flashable zip of stock F340L KK.
Maybe it will take me some 4 or 5 hrs.
Click to expand...
Click to collapse
That would be a miracle for me, I'll be waiting!

[ROM] STOCK ROM for General Mobile 4G BUILD LUZ59K

Helle guys, i have succesfully dumped the stock rom from General Mobile 4G and now it is ready to flash via fastboot.
To install the Stock ROM you need;
-to have fastboot installed on your PC
-get your phone to bootloader
after those you only need to run flash-all.bat from the zip.
Happy flashing!:highfive:
Download;
STOCK_LUZ59K.rar
Which partitions does your Rom-Dump include? (Too large, don't want to download now, because I'm on 3G atm.)
How did you dump the Rom, with "dd"?
EDIT: absolutely no chance to mount or extract "system.img"....?
Deleted
Model ??
Hello bros
What is model for this Stock ??
Thk
We need stock ROM of the LUZ17E
This rom is not the same of LUZ17E I guess so please help !!!!!
vel_tins said:
Which partitions does your Rom-Dump include? (Too large, don't want to download now, because I'm on 3G atm.)
How did you dump the Rom, with "dd"?
EDIT: absolutely no chance to mount or extract "system.img"....?
Click to expand...
Click to collapse
System.img was compressed, you have to decompress it before it can be mounted. This tools will do the job simg2img or ExtUnpacker.
1cefire said:
System.img was compressed, you have to decompress it before it can be mounted. This tools will do the job simg2img or ExtUnpacker.
Click to expand...
Click to collapse
I've tried "simg2img" already.
Code:
-virtual-machine ~/iq2 $ ./simg2img system.img system.uncompressed
[B]Unknown chunk type 0xcac2[/B]
EDIT: I used an outdated version of "simg2img", it's ok now with the latest version.
thanks
Sadronis said:
Helle guys, i have succesfully dumped the stock rom from General Mobile 4G and now it is ready to flash via fastboot.
To install the Stock ROM you need;
-to have fastboot installed on your PC
-get your phone to bootloader
after those you only need to run flash-all.bat from the zip.
Happy flashing!:highfive:
Download;
STOCK_LUZ59K.rar
Click to expand...
Click to collapse
is this very stock and stable version? Cuz this phone is not mine. And ofcourse my mother prefers stability to speed
Can this version gained the new update and be updated as the official ones ?
Or
What ?
I have the Philippine Cherry Mobile One G1, which has same specs as General Mobile (Snapdragon 410, 16GB Rom, etc.) can I update with this? my build is LUZ59J
You probably can But before doing it i suggest you to backup required partitions in case of a failure
m192 said:
I have the Philippine Cherry Mobile One G1, which has same specs as General Mobile (Snapdragon 410, 16GB Rom, etc.) can I update with this? my build is LUZ59J
Click to expand...
Click to collapse
While it might work, I wouldn't recommend you do it unless you know what you're doing.
- The differences between LUZ59J and LUZ59K is probably minimal and might not be worth the risk
- You will likely not be able to receive OTAs if you install a build that is not available from Google on your device
- If installing LUZ59K didn't go well and you didn't make a proper backup of LUZ59J, then you might have trouble making your phone work again until someone shares a proper backup.
pawitp said:
While it might work, I wouldn't recommend you do it unless you know what you're doing.
- The differences between LUZ59J and LUZ59K is probably minimal and might not be worth the risk
- You will likely not be able to receive OTAs if you install a build that is not available from Google on your device
- If installing LUZ59K didn't go well and you didn't make a proper backup of LUZ59J, then you might have trouble making your phone work again until someone shares a proper backup.
Click to expand...
Click to collapse
Updated via OTA to LUZ59M, it fixed stagefright and certifi-gate vulnerabilities!
I am sticking with stock with this phone, it is my daily driver!
Thanks!
Does it work on dual sim device?
Sadronis said:
Helle guys, i have succesfully dumped the stock rom from General Mobile 4G and now it is ready to flash via fastboot.
To install the Stock ROM you need;
-to have fastboot installed on your PC
-get your phone to bootloader
after those you only need to run flash-all.bat from the zip.
Happy flashing!:highfive:
Download;
STOCK_LUZ59K.rar
Click to expand...
Click to collapse
Downloade URL is non response.
General Mobile 4G Dual
Does it work on dual sim device?
JaxaPRO said:
Does it work on dual sim device?
Click to expand...
Click to collapse
I noticed a link for the General Mobile 4G Dual on a Turkish forum but I'm not able to pass the CAPTCHA to register. @Sadronis , can you help to mirror it?
there is no way to flash these parts if u dont unlock the bootloader..
@Sadronis I use Windows xp and ubuntu 15.10 dual boot. Both installed adb and fastboot drivers. I unlocked oem lock and enabled USB debugging
When I enter "adb devices" command in terminal/cmd it lists my device but it don't when I'm on bootloader for both. How can I correct this? .bat file can't be flashed because of this
fastboot and sideload need additional drivers.
If you have the correct drivers installed, in bootloader mode than try "fastboot devices":
Code:
C:\Users\xxx>fastboot devices
c73a281e fastboot
dual sim or single ?

Categories

Resources