Zuk Z1 CM
Hi
If i buy the Zuk Z1', the chinese version, will i be able to change to CM 12.1?
Thanks
ronflomin said:
Hi
If i buy the Zuk Z1', the chinese version, will i be able to change to CM 12.1?
Thanks
Click to expand...
Click to collapse
Yes.
Life Engineer said:
Yes.
Click to expand...
Click to collapse
Thanks for the answear.
Do you how could i do it?
Will the CM 12.1 will be online so i could download it? and than i will be able to install the CM 12.1 ROM?
Thanks
ronflomin said:
Thanks for the answear.
Do you how could i do it?
Will the CM 12.1 will be online so i could download it? and than i will be able to install the CM 12.1 ROM?
Thanks
Click to expand...
Click to collapse
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: http://tinyurl.com/nf2yxdr
mcgangsta said:
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: LINK
Hi
I talked with seller and he said that this is android 5.1 and not CM12.1.
If i buy the Android 5.1 how can i flash it to CM12.1?
Thanks
Click to expand...
Click to collapse
ronflomin said:
mcgangsta said:
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: LINK
Click to expand...
Click to collapse
Hi
I talked with seller and he said that this is android 5.1 and not CM12.1.
If i buy the Android 5.1 how can i flash it to CM12.1?
Thanks
Click to expand...
Click to collapse
From the screenshots, you can see that it should be CM12.1 _or_ similar. CM12.1 is also Android 5.1.1. Basically the screens look like Cyanogen OS 12.1 in Oneplus One. However, could be some other ROM too.
In any case, you can change the ROM to whatever is available for the device. Instructions and links to Cyanogen OS 12.1 can be found from "how to root zuk z1" thread.
mcgangsta said:
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: http://tinyurl.com/nf2yxdr
Click to expand...
Click to collapse
mcgangsta said:
From the screenshots, you can see that it should be CM12.1 _or_ similar. CM12.1 is also Android 5.1.1. Basically the screens look like Cyanogen OS 12.1 in Oneplus One. However, could be some other ROM too.
In any case, you can change the ROM to whatever is available for the device. Instructions and links to Cyanogen OS 12.1 can be found from "how to root zuk z1" thread.
Click to expand...
Click to collapse
Hi
Thank you very much!
I didnt understand most of the things which pepole talked about in the "how to root zuk z1" conversation.
I would really be happy if someone can explain me how to do it? does it final version?
Thanks
mcgangsta said:
From the screenshots, you can see that it should be CM12.1 _or_ similar. CM12.1 is also Android 5.1.1. Basically the screens look like Cyanogen OS 12.1 in Oneplus One. However, could be some other ROM too.
In any case, you can change the ROM to whatever is available for the device. Instructions and links to Cyanogen OS 12.1 can be found from "how to root zuk z1" thread.
Click to expand...
Click to collapse
Do you know where i can find the ZUK Z1, the intrnational version in good price?
ronflomin said:
Do you know where i can find the ZUK Z1, the intrnational version in good price?
Click to expand...
Click to collapse
International version is not released yet
Should be in mid-october or something like that, but there is no confirmation about differences between chinese and international models (other than the software).
I got my zuk z1 today. I have converted to cyanogen. Now I have discovered that my speaker is faulty. Does anyone know how to flash back to stock zui? Please help
limestar said:
I got my zuk z1 today. I have converted to cyanogen. Now I have discovered that my speaker is faulty. Does anyone know how to flash back to stock zui? Please help
Click to expand...
Click to collapse
there are other noticeable bugs. earphone and speaker loudness becomes much quieter with display off (in standby). Double tap to wake doesnt work most of the time, fingerprint sensor also doesnt register sometimes( it might be related to double tap to wake issue). also sometimes the screen takes a few seconds to turn on from standby. dialler if call option is selected as ASK EVERYTIME the first prompt to choose which SIM always disappears with no input, the second time works normally. basically i have to dial 2 times to place a call. these are the bugs that i have noticed so far. SIM issue is also on Yureka so its a 2 SIM phone problem.
@limestar can you explain me how you converted your terminal? which "method" you used?
Thx
Hi this is Limestar. My other account. I followed the guide on modaco forum. Very easy but you have to go to the Cyanogen beta first then do about 4 ota's to get to final CM. Only way to avoid no sound bug
Sent from my Z1 using Tapatalk
[email protected] said:
there are other noticeable bugs. earphone and speaker loudness becomes much quieter with display off (in standby). Double tap to wake doesnt work most of the time, fingerprint sensor also doesnt register sometimes( it might be related to double tap to wake issue). also sometimes the screen takes a few seconds to turn on from standby. dialler if call option is selected as ASK EVERYTIME the first prompt to choose which SIM always disappears with no input, the second time works normally. basically i have to dial 2 times to place a call. these are the bugs that i have noticed so far. SIM issue is also on Yureka so its a 2 SIM phone problem.
Click to expand...
Click to collapse
Have these bugs been fixed through an update?
wildlime said:
Hi this is Limestar. My other account. I followed the guide on modaco forum. Very easy but you have to go to the Cyanogen beta first then do about 4 ota's to get to final CM. Only way to avoid no sound bug
Sent from my Z1 using Tapatalk
Click to expand...
Click to collapse
Hi, can you pls guide me on how to do it ?
i have the same no sound bug issue... I tried the modaco method. it is failing to flash the recovery saying device is locked.
How can i set all things correct ? i am very much disappointed. pls help me....
For you information.
http://www.lenovosj.com/rom/zuk-z1/2702.html
Related
I don't own this device, every test is made by users and changes are on demand.
It's described as TESTING, because i'm trying to port this feature from other phones, what isn't easy when i can only make limited tests!
This mod will enable your front earpiece speaker in conjunction with your the main, bottom speaker.
Requirements
Rooted and unlocked Moto X 2014
Custom ROM: Cyanogenmod, Liquid Smooth, Resurrection Remix, SlimLP
DISCLAIMER
I am not responsible to any software or hardware issue made by flashing this MOD.
Installation:
1: Download zip
2: Boot to recovery
3. Find DualSpeakerMotoX.zip and flash it.
4. Reboot!
Reporting:
-Exact model number (for example 1097XT)
-Name and build date of your ROM
-Name of zip you flashed
Reports without any of this information will be ignored
Download!
If you want to support student and his work:
Do you have a zip to share that will revert to stock?
Sent from my XT1095 using XDA Free mobile app
didn't work
I flashed and didn't work
mprziv said:
Do you have a zip to share that will revert to stock?
Sent from my XT1095 using XDA Free mobile app
Click to expand...
Click to collapse
Nope. I can make one if you want to test.
ddubz said:
I flashed and didn't work
Click to expand...
Click to collapse
Which model and ROM?
Xt1095 pure edition lxe22.46-11 @mastero9017
ddubz said:
Xt1095 pure edition lxe22.46-11 @mastero9017
Click to expand...
Click to collapse
I think it's now working only on custom ROMs. Please try to flash this one for testing stock fix and report.
mastero9017 said:
I think it's now working only on custom ROMs. Please try to flash this one for testing stock fix and report.
Click to expand...
Click to collapse
i couldn't hear anything with that zip coming from the earpiece
Keeping an eye on the thread.
The mod doesn't work for me [emoji20]
XT1097 Stock 5.0 brazilian retail
Hello , someone has tested model xt1092 with stock or costum rom rom ? Resurrection wear now and it seems that I only worked once , or I'm not sure , but I do not appreciate it work ,. thx
regards
Doesn't work for me on XT1095 Pure Edition running latest LiquidSmooth rom.
Please download this 2nd test, it's now only for custom ROMs, because fixing stock will take some time.
http://www.mediafire.com/download/mzjiz82loayg6hf/DualSpeakerMotoXtest2.zip
Report your model number and ROM you are using and is this mod working for you.
You should clarify this is only for cm, aosp, etc or whatever in the op.
mastero9017 said:
Please download this 2nd test, it's now only for custom ROMs, because fixing stock will take some time.
http://www.mediafire.com/download/mzjiz82loayg6hf/DualSpeakerMotoXtest2.zip
Report your model number and ROM you are using and is this mod working for you.
Click to expand...
Click to collapse
I'm running liquid and I can't seem to tell the difference.
Edit:maybe a small difference. Is the top speaker supposed to be just as loud?
mastero9017 said:
Please download this 2nd test, it's now only for custom ROMs, because fixing stock will take some time.
http://www.mediafire.com/download/mzjiz82loayg6hf/DualSpeakerMotoXtest2.zip
Report your model number and ROM you are using and is this mod working for you.
Click to expand...
Click to collapse
hello, that model is yours and rom currently carry? thank you very much
regards
I just wish my earpiece vol was louder in general. Call volume is so quiet
Doesnt work on my xt1092 with cm12
mastero9017 said:
I don't own this device, every test is made by users and changes are on demand.
It's described as TESTING, because i'm trying to port this feature from other phones, what isn't easy when i can only make limited tests!
Click to expand...
Click to collapse
OP is updated with latest informations about testing, support for stock ROM is dropped for now, because speaker is really hardcoded there.
Also i updated download link to the newest test zip, so please download and report with all informations.
I tested it on my xt1092 with cm12. It already doesnt work. How can i help you?
drolgnir said:
I just wish my earpiece vol was louder in general. Call volume is so quiet
Click to expand...
Click to collapse
It's much easier, and i can do that in future.
matt99017d said:
I'm running liquid and I can't seem to tell the difference.
Edit:maybe a small difference. Is the top speaker supposed to be just as loud?
Click to expand...
Click to collapse
Which version have you flashed earlier? Top speaker will never be as loud as bottom one, because it's not the same hardware thing, it's just for better stereo experience.
Here is test3 for you, i made earpiece extremely loud compared to last one, so i don't add it to OP yet, just to clarify is it working for you.
http://www.mediafire.com/download/t66yjyvt6laxl7d/DualSpeakerMotoXtest3.zip
Good News! BETA TESTERS WANTED: GO-GO-GO
en.miui.com/forum.php?mod=viewthread&tid=76795
AND C'MON TEST & SHARE ROM THERE!
Redmi Note W1 Enhanched / Stable Global 37.0
The ROM is leaked: http://bigota.d.miui.com/5.1.13/miui_HMNoteW_5.1.13_6fc090fa44_4.4.zip
See here: http://en.miui.com/thread-76796-1-1.html
alex.79 said:
The ROM is leaked: http://bigota.d.miui.com/5.1.13/miui_HMNoteW_5.1.13_6fc090fa44_4.4.zip
See here: http://en.miui.com/thread-76796-1-1.html
Click to expand...
Click to collapse
any one tested this leaked ROM?
navneet_bhaskar said:
any one tested this leaked ROM?
Click to expand...
Click to collapse
I tested, but is not suitable for daily use, it is like alfa build full with bugs. For example buttons backlight don't work, file manager crashes, you can make a call only with loudspeeker, PIN code of SIM2 don't work, flashlight don't work also. I think we must wait a lot for build which is proper for daily use.
navneet_bhaskar said:
any one tested this leaked ROM?
Click to expand...
Click to collapse
Yes.
Works.
Full clean install recommended.
It is very fast but has some bugs ofcourse. It is BETA Test version.
GPS, Data, WiFi working.
Unfortunately, the call function is incorrect
I can hear the other person but calling people can not hear me.
Chrome FC again-and-again for me.
Battery consumption higher than V5.
4.4.2 gapps recomennded or you have to use MARKET.app (built-in)
I do not write more
You ask, I observe and answer (if I can)
what is atutu benchmark on the ROM?
navneet_bhaskar said:
what is atutu benchmark on the ROM?
Click to expand...
Click to collapse
It doesn't matter, this is very unusable build.
alex.79 said:
It doesn't matter, this is very unusable build.
Click to expand...
Click to collapse
Here is a little bit better....
JulianJenner said:
Here is a little bit better....
Click to expand...
Click to collapse
Hi bro have u flashed this ROM if so can I know the bug's
bharathbondfire said:
Hi bro have u flashed this ROM if so can I know the bug's
Click to expand...
Click to collapse
Bugs are there, loudspeaker issue during call are fixed, but other is there. The ROM is clean, many of MIUI apps are removed like file manager, calendar etc.
Sent from my XT1068 using Tapatalk
alex.79 said:
Bugs are there, loudspeaker issue during call are fixed, but other is there. The ROM is clean, many of MIUI apps are removed like file manager, calendar etc.
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
Can u specify some major bugs bro and screen's too if possible
Thanks in advance
Button backlight don't work, In SIM 2 you can use ONLY SIM without pin, because pin don't work, if you try to put apn phone is restart, big battery drain and etc.
Sent from my XT1068 using Tapatalk
navneet_bhaskar said:
any one tested this leaked ROM?
Click to expand...
Click to collapse
i used it so many bugs if you have link of another beta version please give me
yash221193 said:
i used it so many bugs if you have link of another beta version please give me
Click to expand...
Click to collapse
New official BETA (2015.01.15.) is out.
This is good official edition.
Calling works now (in and out too.)!!!
Battery displaying is not correct.
My experience: battery charging display not correct on system and phone off charging, but correct in TWRP recovery...
Hello the link is broken
Not broken, time is out…
Xiaomi Redmi Note 1W - MIUI v6 BETAv2 5.1.15
I try to install beta v6 on my Note only with wipe cache e dalvik... Works good, but has more important bugs.
So there are different beta tester? 30 in English miui forum, and in Chinese forum, I wonder if there are be given same beta ROM or not, coz the leaked ROM we get were from Chinese site
Closed at OP request.
This thread was made to keep the development thread of Cyanogenmod 13 clean.
If you have any question related to this rom,feel free to ask here!
EDIT
Due to certain circumstances and requests by several people to share my link of the CM build I produced,here is the link to the folder:
DOWNLOAD
NOTE
The source code is by Meticulus.
This is also for those who installed the CM build on the Honor 5C,please do give feedback so a Working/Not Working list can be assembled.
Used cyanogenmod 13 for a while on this phone but decided to revert back to stock because of the camera. now when i try to install it and do a factory reset from twrp i cant!
on twrp boot it gives me an error that it cant mount /data (no such file or destination) thus not wiping it, thus not being able to install cm13. any help?
EDIT: seems that twrp doesnt detect internal storage at all. shows 0mb available , but i can browse it on the stock file manager just fine. ideas?
slumpijs said:
Used cyanogenmod 13 for a while on this phone but decided to revert back to stock because of the camera. now when i try to install it and do a factory reset from twrp i cant!
on twrp boot it gives me an error that it cant mount /data (no such file or destination) thus not wiping it, thus not being able to install cm13. any help?
EDIT: seems that twrp doesnt detect internal storage at all. shows 0mb available , but i can browse it on the stock file manager just fine. ideas?
Click to expand...
Click to collapse
try to flash custom rom based on stock
and then flash stock recovery and then do a factory reset from stock recovery
try it and tell me what happened
sorry for my poor English
hey can I flash the new update without formatting the system?
Double touch to unlock and swipe to lock are working?
Claleale said:
Double touch to unlock and swipe to lock are working?
Click to expand...
Click to collapse
I don't think so,but you can unlock the phone instantly with your fingerprint,so I personally see no reason to use DT2W on this device.
I have a question,
if only LTE is availeble, what happen when you are in a place where the reception isn't good? Does the network stop working?
Potato997 said:
I have a question,
if only LTE is availeble, what happen when you are in a place where the reception isn't good? Does the network stop working?
Click to expand...
Click to collapse
When i have no LTE coverage, i have 3G network, so no
Everytime i want to pair my LG G Watch bluetooth turns off... And new on again...
Somebody the same Problem?
StefanSpiegel said:
Everytime i want to pair my LG G Watch bluetooth turns off... And new on again...
Somebody the same Problem?
Click to expand...
Click to collapse
I had this problem with my bluetooth headset, but after trying and trying it worked
enzo24754 said:
I had this problem with my bluetooth headset, but after trying and trying it worked
Click to expand...
Click to collapse
did you try something spezial?
StefanSpiegel said:
did you try something spezial?
Click to expand...
Click to collapse
Nope, just trying
How difficult will it be to get a CM 14 build up and running once we have a working CM 13 build (using CM13 as template)?
Just wondering because first CM 14 builds are out for other devices.
Schlengge said:
How difficult will it be to get a CM 14 build up and running once we have a working CM 13 build (using CM13 as template)?
Just wondering because first CM 14 builds are out for other devices.
Click to expand...
Click to collapse
CM13 can't be used as a template.
Other devices got CM14 because:
a)their stock rom stopped at MM,but their developers made the blobs open source,so they can easily go to CM14
b)they already have stock N,so they simply use the blobs from it.
Our device doesn't meet none of the provided scenarios,we will probably get stock N on December,and only then will we be able to start working on it.
Sent from my P9-Lite using Tapatalk
HassanMirza01 said:
@Meticulus if possible, upgrade the camera to 13mp first,,, we all are just waiting for original camera to install CM13 ❤ love your work in quick time :thumbsup
Click to expand...
Click to collapse
But... 13MP camera works on Google Camera...
enzo24754 said:
But... 13MP camera works on Google Camera...
Click to expand...
Click to collapse
Yah,but that pearl even had the audacity to order a developer what to work on,I doubt logic would work on him. :silly:
Sent from my P9-Lite using Tapatalk
I don't understand why people don't respect developers will.. They can work on whatever they want, if you have these kind of request just build your own ROM.
Potato997 said:
I don't understand why people don't respect developers will.. They can work on whatever they want, if you have these kind of request just build your own ROM.
Click to expand...
Click to collapse
Suggestions are okay, but not orders
Did the CM13 development stop?
I don't hope so..
New global dev rom.
https://drive.google.com/file/d/0BxmvHU43bIiQeHVWcG1HMmUxWkk/view
Direct link from xiaomi's server:
Fastboot (1740M)
http://bigota.d.miui.com/7.2.24/cap...24_20170224.0000.00_6.0_global_f102605a9c.tgz
Recovery (1504M)
http://bigota.d.miui.com/7.2.24/miui_MI5SGlobal_7.2.24_686eefac78_6.0.zip
Now im using it about week good and stable. Its best rom till now but i missing my language lithuanian. I try before lineage os and still more bugs when opening browser web many ads and viruses showing. Tried adfree but not helped
i'm use STB 8.0.3.0 can i use this ?
--- I'm just use zip version and selected to update its appear can't verify package
so first i'm must unlockbootloader ?
--- issue on 8.0.3.0 stuck 50 % for unlockbootloader anyone can solve this I try different method but can't solve
woodii888 said:
--- issue on 8.0.3.0 stuck 50 % for unlockbootloader anyone can solve this I try different method but can't solve
Click to expand...
Click to collapse
Use the newest MiFlash Unlock tool (v1.1.1111.11231) from this thread.
Sometimes, you have to try several times in order to unlock your phone.
Oh, and I only can unlock my phone when I use the original cable that came with the phone, other cables shows me the 50% error.
awaaas said:
Direct link from xiaomi's server:
Fastboot (1740M)
http://bigota.d.miui.com/7.2.24/cap...24_20170224.0000.00_6.0_global_f102605a9c.tgz
Recovery (1504M)
http://bigota.d.miui.com/7.2.24/miui_MI5SGlobal_7.2.24_686eefac78_6.0.zip
Click to expand...
Click to collapse
Can you give me more information this build, example: changelog, what's new?
Thanks
mrducluan said:
Can you give me more information this build, example: changelog, what's new?
Thanks
Click to expand...
Click to collapse
Uh, the same as the others?
You can read the source in the original thread on the Taiwan's MIUI forum. Me personally still runs LineageOS 14.1...
I'm also getting the "Could not verify package" error when trying to flash it via the Updater app. I cannot flash it via MiFlash because I cannot access EDL Mode and I do not have unlocked bootloader....
Getting the 50% "account is not the same" error while trying to unlock, because I'm at the Global Stable ROM...
I'm trying to install dev ROM to be able to unlock bootloader, however I can't seem to do that, since I cannot access EDL mode anymore.
Miui 8.2.23 - 8.2.24 it is weekly not stable..
raspizdiaika said:
Miui 8.2.23 - 8.2.24 it is weekly not stable..
Click to expand...
Click to collapse
We never said it was stable.
awaaas said:
We never said it was stable.
Click to expand...
Click to collapse
Could you give link download MIUI 8 Global Beta ROM 7.3.2 for mi 5s this link: http://en.miui.com/thread-526049-1-1.html
THanks:good:
mrducluan said:
Could you give link download MIUI 8 Global Beta ROM 7.3.2 for mi 5s this link: http://en.miui.com/thread-526049-1-1.html
THanks:good:
Click to expand...
Click to collapse
I don't have it, sorry.
awaaas said:
I don't have it, sorry.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=529152257862707399
This china dev with multilang
Sent from my MI 5s using XDA Premium HD app
marcel112 said:
https://www.androidfilehost.com/?fid=529152257862707399
This china dev with multilang
Sent from my MI 5s using XDA Premium HD app
Click to expand...
Click to collapse
Yes, thank you. But it is not the same thing.
I do not understand. I've never seen a global weekly ROM for Mi 5S. Is this official? I'm actually using MIUI.eu at latest build and I'm kinda unsatisfied with battery life, so I want to know how this misterious build behaves.
Besides, I'd like to know what should I exactly do to install this build, and how can I get access to future ones, cause there is not any link on MIUI official forum.
Enviado de meu MI 5s usando Tapatalk
awaaas said:
Uh, the same as the others?
You can read the source in the original thread on the Taiwan's MIUI forum. Me personally still runs LineageOS 14.1...
Click to expand...
Click to collapse
Any bugs with lineageos 14 1?
fopoku2k2 said:
Any bugs with lineageos 14 1?
Click to expand...
Click to collapse
No anything big for me, just the fingerprint scanner wouldn't act as a home button sometimes (I had to long press it once, and then press it again to trigger the home button function, but not all the time).
Other peoples report different things tho, like not be able to boot, or the screen is buggy (IIRC, if you had the LG screen, not JDI), or the signal is unstable . But it's been great for me so far...
fopoku2k2 said:
Any bugs with lineageos 14 1?
Click to expand...
Click to collapse
I have so many random reboots.
The screen becomes unresponsive after a reboot, and I have to force reboot again to get the touchscreen back!
Aside from that, the fingerprint scanner is a BIG hit or miss. Most of the time it doesn't respond at all. I am surprised that no one else is having these issues. Could be my device
Rouz. said:
I have so many random reboots.
The screen becomes unresponsive after a reboot, and I have to force reboot again to get the touchscreen back!
Aside from that, the fingerprint scanner is a BIG hit or miss. Most of the time it doesn't respond at all. I am surprised that no one else is having these issues. Could be my device
Click to expand...
Click to collapse
That's because you have LG LCD variant as me. The usual variant are those with Jdi LCD
is it global or Chinese? I don't know Mi 5s's global dev Rom.
____Update 12/01____
Since a couple of days we now have v 9.1.2.0. I haven't noticed any differences yet, but the wallpaper carousel is functioning again. They also implemented fixes for problems that I personally did not encounter. ...aaand the notifications are slightly improved! Some of them evene expand and allow for direct interaction. Breathtaking development.
Get it while it's fresh on en.miui.com.
Should you not be rooted, I can recommend installing it via XiaoMiTool. I used this to flash the last MIUI 8 Global Stable, and then got 9.1.1.0 and now 9.1.2.0 via OTA. I've read that for some people here fast charging isn't working on th 9-er Firmwares. I have had no problem with that at all. Maybe it's because you guys are rooted, or because system wasn't flashed properly? I don't know, but I feel with you...
____Update 11/16____
The MIUI9 release has since been officially announced. This XDA article sheds some light on the release. However, as of today, the ROM is still not available for download on en.miui.com.
If you don't feel like waiting for OTA hitting you, shadowxaero has provided a link to download 9.1.1.0 (NDEMIEI) in post #7.
To enable VOLTE in presumably every MIUI realease, KevinLuong has shared a great link to an explanation including an easy fix in post #2.
Update 11/17
The Firmware is officially available on en.miui.com now. Should you not be rooted, consider installing it via XiaoMiTool, which will let you chose and download the Firmware within the programs flashing dialogue (give that man a beer).
_____initial post_____
..but there is no mention of it anywhere (yet). Why is that?
It's Version 9.1.1.0 (NDEMIEI). Got it OTA on Friday night, but it isn't even yet listed on the official site. Whats up with that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release. Oh, and notfications are still not up to scratch in MIUI 9, which is the single most annoying thing about MIUI.
Anyone else on this ROM? Maybe with tips, tricks, htoughts or insights?
.
cartonneexpress said:
...but there is no mention of it anywhere. Why is that?
It's Version 9.1.1.0 (NDEMIEI). Got it OTA on Friday night, but it isn't yet listed on the official site. Whats up with that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release. Oh, and notfications are still not up to scratch, which is the single most annoying thing about MIUI.
Anyone else on this ROM? Maybe with tips, tricks, htoughts or insights?
Click to expand...
Click to collapse
It's a nightly preview pushed to some users.
http://en.miui.com/thread-951467-1-1.html explains the VoLTE thing, the dialler code enabled it for me.
Sent from my Mi MIX 2 using Tapatalk
KevinLuong said:
http://en.miui.com/thread-951467-1-1.html explains the VoLTE thing, the dialler code enabled it for me.
Click to expand...
Click to collapse
Thanks a lot! That explains, and easily fixes it!
KevinLuong said:
It's a nightly preview pushed to some users.
Click to expand...
Click to collapse
Hmm. Why would they do that? I'm not even participating in the user feedback program (at least not willingly ). Usually the nightlys they push out clearly state that they are nightlys, don't they? I saw this with the Mi 6 when it got v 9.0.1.0. In this case on Mix 2 the ROM clearly states "stable" though.
Well, I don't want to complain. I feel special now. :victory:
cartonneexpress said:
...but there is no mention of it anywhere (yet). Why is that?
It's Version 9.1.1.0 (NDEMIEI). Got it OTA on Friday night, but it isn't even yet listed on the official site. Whats up with that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release. Oh, and notfications are still not up to scratch in MIUI 9, which is the single most annoying thing about MIUI.
Anyone else on this ROM? Maybe with tips, tricks, htoughts or insights?
Click to expand...
Click to collapse
What ROM where you on before, MIUI 8 Global Stable?
Andy4Shurr said:
What ROM where you on before, MIUI 8 Global Stable?
Click to expand...
Click to collapse
Yes, I had Global Stable (v8.5.1.0).
It's a global stable beta (stable beta = what exactly??) according to the miui forums. There was an announcement about it. I put a link to the download in the reverse engineering thread.
I haven't actually tried it yet but I would be interested to know if it passes safetynet, I guess.
http://bigota.d.miui.com/V9.1.1.0.NDEMIEI/miui_MIMIX2Global_V9.1.1.0.NDEMIEI_232bee13eb_7.1.zip
A user provided that link on the MIUI forums. I haven't flashed it yet and I believe you need to be on the MIUI8 Stable ROM in order to flash this.
duraaraa said:
It's a global stable beta (stable beta = what exactly??) according to the miui forums. There was an announcement about it. I put a link to the download in the reverse engineering thread.
I haven't actually tried it yet but I would be interested to know if it passes safetynet, I guess.
Click to expand...
Click to collapse
Lol whoops, missed this post lol. A user on MIUI also said it passed safety net yesterday.
shadowxaero said:
http://bigota.d.miui.com/V9.1.1.0.NDEMIEI/miui_MIMIX2Global_V9.1.1.0.NDEMIEI_232bee13eb_7.1.zip
A user provided that link on the MIUI forums. I haven't flashed it yet and I believe you need to be on the MIUI8 Stable ROM in order to flash this.
Lol whoops, missed this post lol. A user on MIUI also said it passed safety net yesterday.
Click to expand...
Click to collapse
You can flash it with fastboot, but you have to convert the system to a system.img in order to do so.
duraaraa said:
It's a global stable beta (stable beta = what exactly??) according to the miui forums. There was an announcement about it. I put a link to the download in the reverse engineering thread.
I haven't actually tried it yet but I would be interested to know if it passes safetynet, I guess.
Click to expand...
Click to collapse
duraaraa said:
You can flash it with fastboot, but you have to convert the system to a system.img in order to do so.
Click to expand...
Click to collapse
Lol how does one do that?
shadowxaero said:
Lol how does one do that?
Click to expand...
Click to collapse
I used sdat2img.py
https://github.com/xpirt/sdat2img
Use that to make a system.img, flash that with fastboot.
Then flash all of the other partitions with fastboot from the unpacked zip, following the pattern of the Xiaomi fastboot updates so you know which thing needs to be flashed to what.
Kind of difficult to explain and probably not worth putting together a whole tutorial, but that's how you do it.
this build passes safetynet with Magisk 14. I also installed this over Epic rom and not over v8 stable.. works fine anyways. I did format userdata and cache from fastboot before i flashed.
cartonneexpress said:
...but there is no mention of it anywhere (yet). Why is that?
Everything seems to run great, except that VOLTE can not be activated, which I find a little weird for a stable release.....
Click to expand...
Click to collapse
Try disabling VoLTE carrier check with *#*#86583*#*# That did it for me. Make sure the little pop-up screen says disabled
No notification update no fun
Jesus when will it be officially available OTA?
Removed, was already in this thread.
Full ROM Pack Version: V9.1.1.0.NDEMIEI is available now : http://en.miui.com/download-334.html#491
whats the best way to upgrade? I am on MIMIX2Global_7.11.6 beta?
el3c said:
whats the best way to upgrade? I am on MIMIX2Global_7.11.6 beta?
Click to expand...
Click to collapse
This will most likely not work coming from the developer ROM, but try the regular manual update method:
Download the ROM and copy it to your device. Then go to settings > About Phone > System Update and chose your update package from the extended menu (three dots, top right).
Should the regular method not work, and should your device not be unlocked/rooted, then simply use the XiaoMiTool. If you follow the instructions this program works really really well, so consider donating that guy a beer or two.
.
cartonneexpress said:
This will most likely not work coming from the developer ROM, but try the regular manual update method:
Download the ROM and copy it to your device. Then go to settings > About Phone > System Update and chose your update package from the extended menu (three dots, top right).
Should the regular method not work, and should your device not be unlocked/rooted, then simply use the XiaoMiTool. If you follow the instructions this program works really really well, so consider donating that guy a beer or two.
.
Click to expand...
Click to collapse
phone is unlocked... i cant live without a native adblocker ^^
Thanks...and it seems to work with the updater app it´s in German but it says: all data will be deleted and it make a revert to global stable.
i´ve canceled that, i am not sure whats better, stay on beta and get weekly updates if i want or choose global. it s a hard decission
el3c said:
phone is unlocked... i cant live without a native adblocker ^^
Thanks...and it seems to work with the updater app it´s in German but it says: all data will be deleted and it make a revert to global stable.
i´ve canceled that, i am not sure whats better, stay on beta and get weekly updates if i want or choose global. it s a hard decission
Click to expand...
Click to collapse
I'm in the same position
Hi guys,
If you installed the Official MIUI 9.1 Stable can you please report on battery life ?
Regards.