Figured it all out! Delete thread please.
Hey. I'm having some problems upgrading to the newest version of The FroyoMOD (2.7.0). I'm currently using 2.5.0.7 and I've got root.
Here's what I've tried so far:
Free version of Rom Manager: Install from SD-card -> Wipe Dalvik Cache -> phone reboots -> the load screen comes up and then hits 10% and I get the /!\ icon. Then the phone reboots yet again, but just into the old version (2.5.0.7).
Install through recovery: reboot into android system recovery -> apply sdcard:update.zip -> I get this error:
Code:
E:failed to open /sdcard/update.zip (No such file or dir)
E:signature verification failed
Installation aborted.
As soon as I get to the system recovery menu I also get this error message:
E:Can't open/cache/recovery/command
I don't know what I'm doing wrong, any help would be appreciated.
I have a Galaxy Mini GT-S5570 running CM 10.1 which was installed about a month back. Yesterday my phone suddenly crashed and after rebooting it got stuck in the boot animation (cyanogenmod logo). I tried wiping the cache and data but when the CM recovery (v4.0.0.5) starts formatting /data it gets stuck. It displays formatting /data... and its their for forever. PS I was experiencing frequent reboots and hangs after I flashed the new badass kernel!
What i tried to did:
1. Updated CWM to latest available version but the problem exists.
2. Tried to restore my backup of cm 10.1 rom but it stucks at 'Restoring Data'.
3. Installed stock rom via odin. When Odin says Close serial port and wait until rebooting, the phone automatically boots into stock recovery
and it says:
" Installing update...
-- Applying Muti-CSC --
Multi_CSC : there are common apks
Multi_CSC : comm_so
Can't access to '/system/csc/ATL/system'.
Formatting /cache...
-- Applying Muti-CSC --
Multi_CSC : there are common apks
Multi_CSC : comm_so
Can't access to '/system/csc/ATL/system'. "
Odin says PASS but the phone is still stuck at stock recovery.
4. Wiped cache succesfully via stock recovery but it stucks at wiping data/reset (formatting /data...)
5. I then installed back CWM via odin. CWM displays the following message:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
Any help is surely appreciated.
Thanks.
anyone?
You got so many issues, and seems that you have tried a lot of things already, now first 1 check your sdcard if is it working properly, 2 format system from cwm and then install stock rom via odin (if on samsung logo there isnt boot sound then install stock rom again n again untill sucess) 3after once on stock try reflashing your custom rom.
If still not helpful start panicking
Sent from my GT-S5570 using xda premium
aakashasaj said:
You got so many issues, and seems that you have tried a lot of things already, now first 1 check your sdcard if is it working properly, 2 format system from cwm and then install stock rom via odin (if on samsung logo there isnt boot sound then install stock rom again n again untill sucess) 3after once on stock try reflashing your custom rom.
If still not helpful start panicking
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
i tried your way mate but the phone doesnt boot after flashing rom via odin.. automatically boots to stock recovery saying:
"Appling Muti-CSC"
wonder if it solved, have same problem here, please
Hi,
*
now the installation of cm 11 aborted. I try to explain my way for the installation and the problems. May be, someone can help me here.
*
1. I install overcome with odin.
2. I install the overcome kernel 4.0 with odin
3. After flashing the kernel I go to the overcome recovey and install the overcome rom with wipe. Systems starts and works fine.
4. Now, I start into the overcome recovery to install cm11 with the installation menu
5. The installation of cm11 begins. It is very short. The device makes a reboot and after the reboot I have the cm11 recorvery and now the problems begin.
6. At the start of the cm11 recovery I get these faults.
*
E: Can´t mount/cache/recovery/log
E: Can´t open/cache/recovery/log
E: Can´t mount/cache/recovery/last_log
E: Can´t Open/cache/recovery/last_log
E: Can´t mount/cache/recovery/last_install
E: Can´t Open/cache/recovery/last_install
E: failed to open last_install: Invalid argument
*
7. Now I start the installation of cm11 the second and third time. Everything is fine. Installation successful.
8. Then I start the installation of the micro google apps zip.
9. Meanwhile the installation I get the notification that I don´t have enough space free on the system. The Installation aborted.
10. Then I tried to format the device. First format data, cache, system. It ist all ok.
*
But I can´t format the storage sdcard 0.
I get the notification. “Could not format storage sdcard 0."
I need help please.
Thank you….
*
Hamburgo8855
I must first admit that I never flash cm11 from stock/GB.
What if, you follow storm31 instruction? Restock, flash overcome kernel, then flash cm10.2 first, 3 times.
Then flash cm11, at least twice maybe?
Then flash Banks Gapps minimal as per storm31 thread.
Don't worry too much about sdcard first?
Sent from my GT-P1000 using XDA Free mobile app
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
egomezmx said:
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
Click to expand...
Click to collapse
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
more questions
Raakib Zargar said:
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
Click to expand...
Click to collapse
Hi Raakib, thanks for taking the time to answer! But how can I put the cwm v5 in the phone if the PC doesn't see the phone? Sorry for the basic questions? I'm new in this things. The first time I did this I pluged the phone to the PC and I was able to see the memory card in the windows explorer so I only did a drag and drop, but that doesn't work any more, please advice, thanks!
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
still no luck
Raakib Zargar said:
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
Click to expand...
Click to collapse
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
egomezmx said:
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
Click to expand...
Click to collapse
the stock/original rom wont flash in the recovery. try to flash some other custom rom in CWM 5 and before flahing any rom you need to do a full factory reset and whether in cwm5 or 6 i m nt sure go into advance and wipe efs etc there then flash a rom. If still nothing then contact me i will tell you some great thing +918715031141. (my personal number)
So i got an unlocked/sprint(I think!) version of HTC one m7 just recently and after checking everything out I figured it had some really retro and boring app display interface then I tried checking about phone only to discover It was using the old android 4.4.2 KitKat version so i tried checking for software updates and yes I found one that sized up to 325.18MB and I downloaded it after which i tried installing ,everything was going fine until it got to about ¼ way through the process loader in recovery where it jumped straight to another page that read.
Reboot system now
Apply from SD card
Wipe data/factory reset
Wipe cache partition
Reboot to boot loader
Power down
View recovery logs
Apply from phone storage (all which were to be navigated through and where in blue while beneath and in yellow .......)
__ install /data/media/∅/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
File_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /data/media/Download/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip
(Status 7)
Installation aborted.
So I tried again by rebooting system ,went to settings ,reset the phone to factory mode ,downloaded it again, repeated the process and just the same thing happened again after again because i tried doing it from the recovery where i applied from phone storage but its still the same thing and i really dont like the HTC version of android kitkat especially for its keyboard and input it has the worst emojis on earth even when i downloaded a new keyboard from play store It didn't change whatever retrostyled emoji was on the typing space!
Please help!!!!!!!
Posted from my former device Itel it1408 that's definitely got a better software if not for the RAM
Menchiza said:
So i got an unlocked/sprint(I think!) version of HTC one m7 just recently and after checking everything out I figured it had some really retro and boring app display interface then I tried checking about phone only to discover It was using the old android 4.4.2 KitKat version so i tried checking for software updates and yes I found one that sized up to 325.18MB and I downloaded it after which i tried installing ,everything was going fine until it got to about ¼ way through the process loader in recovery where it jumped straight to another page that read.
Reboot system now
Apply from SD card
Wipe data/factory reset
Wipe cache partition
Reboot to boot loader
Power down
View recovery logs
Apply from phone storage (all which were to be navigated through and where in blue while beneath and in yellow .......)
__ install /data/media/∅/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
File_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /data/media/Download/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip
(Status 7)
Installation aborted.
So I tried again by rebooting system ,went to settings ,reset the phone to factory mode ,downloaded it again, repeated the process and just the same thing happened again after again because i tried doing it from the recovery where i applied from phone storage but its still the same thing and i really dont like the HTC version of android kitkat especially for its keyboard and input it has the worst emojis on earth even when i downloaded a new keyboard from play store It didn't change whatever retrostyled emoji was on the typing space!
Please help!!!!!!!
Posted from my former device Itel it1408 that's definitely got a better software if not for the RAM
Click to expand...
Click to collapse
Someone modded files in /system that's why the ota won't install.
A factory reset only wipes contents from /data/media/0. It doesn't fix or restore /system to factory.
Your best option are to flash a RUU or a custom Rom.
Would help to know your "fastboot getvar all" and also your bootloader status (locked, unlocked or relocked)
alray said:
Someone modded files in /system that's why the ota won't install.
A factory reset only wipes contents from /data/media/0. It doesn't fix or restore /system to factory.
Your best option are to flash a RUU or a custom Rom.
Would help to know your "fastboot getvar all" and also your bootloader status (locked, unlocked or relocked)
Click to expand...
Click to collapse
OK but uhm! How do I get to know this "fastboot getvar all" ? And the phone is s-off and bootloader locked
Menchiza said:
OK but uhm! How do I get to know this "fastboot getvar all" ? And the phone is s-off and bootloader locked
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=76115519&postcount=2