It's very nice and easy saying "what a wookie" to wake my phone and then telling it to set a timer for such and such minutes. I use the timer quite a bit. My problem the volume of the stock timer is obnoxiously loud and the tone is too attention getting...as I'm generally low-key. Has anyone figured out how to change the tone or volume levels of the stock timer?
I have an XT1096 with bl unlock & root.
Has the timer never been a concern for anyone else? Am I asking this question in the wrong place?
Related
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Put it in your sock? *cough*
i wanna to know the answer too....
Anyone?...
juiceppc said:
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Click to expand...
Click to collapse
Stop the scheduled soft-resets?
NuShrike said:
Stop the scheduled soft-resets?
Click to expand...
Click to collapse
I have a couple ideas but they involve either a hammer, or a fish tank.....
Seriously I am looking around but have not found anything yet
Sorta weird you can't disable this :|
Diable vibrate
OK.. might seem odd but a found some materail that said that some of the software used to disable the led with kill the vibrate feature... I could not find the software.. but it give a place to start
collinssc said:
some of the software used to disable the led with kill the vibrate feature
Click to expand...
Click to collapse
There is a software, but I think a registry tweak will be easier:
Code:
Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
Change the "Index" value from 1 to 0
Soft-reset the device
Killing the vibrate isn't a feature, it's a consequence in this case.
And, it's not killing the vibrate on reset/power on.
I think this is something on the chipset level that can only be resolved by a altered ROM or "chipset" update from Qualcomm...??
stop vibrate at every soft-reset
Has someone been able to stop the vibrate starting at every soft-reset ?
I prefer to think of it more as a shudder whilst yawning as it wakes up
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
chris247 said:
Has someone been able to stop the vibrate starting at every soft-reset ?
Click to expand...
Click to collapse
Surely this must be a hardware issue which can't be changed?
I've change my ROM and radio more times than i can remember and still have the same issue. Correct me if i'm wrong but don't some of these ROM bases even come from different WM hardware (which doesn't have this problem)?
I don't think the vibration duration is linked with the hardware, there must be a way to configure this, as it is possible to configure the ringtone to increase the sound or not.
Anyone has already tried changing the vibration duration ?
chris247 said:
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
Click to expand...
Click to collapse
There's 2 ways you can put your phone into vibration mode:
1: tap the speaker icon on the top bar of the phone and select "vibrate" from the on, vibrate, off options.
2: tap the speaker icon on the top bar and leave it set to "on", but drag the two volume sliders to the bottom.
If you use method #1, when you get a notification it will give you 3 short bursts of vibration.
If you use method #2, the duration of vibration for reminders and other notifications (email, sms, etc.) is related to the length of the audio alert. I have my phone set to make noise and vibrate at the same time and when I get a message, it vibrates for the entire time that it's making noise, and not a bit longer. When I drag the volume sliders down instead of putting it exclusively into "vibrate" it vibrates for the same amount of time, so I imagine it is still playing the sound file I have associated for that notification, just not outputting it to the speaker, and vibrates while the sound file is playing.
So if you want a shorter vibration when your alarm arrives, choose a shorter beep, tone, jingle, whatever sound you want it to make when you get an alarm. Or use option #1 for putting it into vibration mode if the 3 short bursts are acceptable to you.
The vibrate upon startup is some low level thing, and I have no idea how to change it.
Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds¬ifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.
There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH
ringtone problem
yea all 3 volumes are set to the max level
ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way
Have you got any profile managers installed (G-profile, Phoneweaver etc)?
ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you
Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.
Sorry if this has been asked before, but I've noticed (as I'm sure many of you have) that when receiving a call the first ring is so low it's almost inaudible. then ring #2 on the phone rings at normal sound level. I've tried various ROMs and all of them seem to have it. Is there any fix for this?
Some of the Roms have the ability to turn off ascending ring I believe. In the sound settings.
Previously, whenever you adjusted the volume, the phone would make a tone to tell you how loud that volume level was, i.e. increasingly louder tones if you were increasing the volume.
I've just noticed that when I change the volume bar, the phone is completely silent (and no, I'm not in Silent or Vibrate mode). Is this a new "feature" of 6.0 or something is wrong with my phone?
kindrich said:
Previously, whenever you adjusted the volume, the phone would make a tone to tell you how loud that volume level was, i.e. increasingly louder tones if you were increasing the volume.
I've just noticed that when I change the volume bar, the phone is completely silent (and no, I'm not in Silent or Vibrate mode). Is this a new "feature" of 6.0 or something is wrong with my phone?
Click to expand...
Click to collapse
well, its not new, as it was in all 3 m releases. and now marshmallow is like that as well.
Thanks! I've never used any of the M Previews so it's good to know this is an expected behavior and not a bug with my device.
kindrich said:
Thanks! I've never used any of the M Previews so it's good to know this is an expected behavior and not a bug with my device.
Click to expand...
Click to collapse
oh gosh, of course
I have very important problem because I am feeling a lot of embarrassment from people. My phone ringer goes down and the volum gets low and then I didn't able to hear the ringtone and I always missed very important calls. Is there any solution to this problem or is there any way that to ringtone volume never goes down even I turn down the media button. Please help it has causes me a lot of loss and embarrassment.
Is the volume setting for ringtones low? or is it the volume of the ringtone itself?
In the latter case you may choose another ringtone. in the first case: Does the setting change when the ringtone rings or during a call. Can you reproduce the problem? What steps are needed?
on some phones there is a quick setting for the ringtone mode. you may remove it if you happen to change the setting by accident.
Safiullah14 said:
I have very important problem because I am feeling a lot of embarrassment from people. My phone ringer goes down and the volum gets low and then I didn't able to hear the ringtone and I always missed very important calls. Is there any solution to this problem or is there any way that to ringtone volume never goes down even I turn down the media button. Please help it has causes me a lot of loss and embarrassment.
Click to expand...
Click to collapse
Which ROM ?
Rooted? Magisk modules?