Telephone (xt890 RazrI ) stuck on Intel-logo when booting - RAZR i Q&A, Help & Troubleshooting

Hello all,
I have my Motorola RazrI stuck again since yesterday. That happens for 3 or 4th time, and everytime I was able to fix the problem easily, by re-flashing the Firmware using RSD Lite.
However this time, stuck is on Intel Logo, and if I try to re-flash the firwamre with RSD, it is failing on step 1.
- error is validation gpt_main failed
I have spent some time to check for any similar topics here, but all the suggested for this moment is not helping me at all.
I am sure it is a software issue, as the device itself is absoltely perfect in condition
I will appreciate anyone who can help me to solve it, and to have my phone back and working
Thank you in advance!

a quick clarification:
I think problem is because before the stuck, phone was running with KitKat version, and now I am trying to flash some older ROM via RSDLite ?
Can someone share some experience and let me know if I can find RSD compatible rom to re-flash .
Thanks

xgalin said:
a quick clarification:
I think problem is because before the stuck, phone was running with KitKat version, and now I am trying to flash some older ROM via RSDLite ?
Can someone share some experience and let me know if I can find RSD compatible rom to re-flash .
Thanks
Click to expand...
Click to collapse
It is going to fail, you are trying to flash a JB partition over the kitkat one. You need the kitkat firmware for that to work.
Sent from my XT1095 using Tapatalk

AGISCI said:
It is going to fail, you are trying to flash a JB partition over the kitkat one. You need the kitkat firmware for that to work.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yes, i am assuming this is the "reason" and error message meaning.
However, can you point me where I can find such KitKat firmware?
Regards

Anyone, can someone help further with suggesting a link where I can download the KitKat version firmware, or any other possible workaround
Many Thanks

Related

[Help needed] Semi-bricked Milestone

Hi all,
prior to any comment, yes, i know there are already posts on this issue, however looking through them didn't help at all unfortunately.
I have a Moto Milestone, origin is Israel.
somewhere along the way i've updated the bootloader to 90.78 and since then - the phone is stuck in the notorious loop and cannot restart the OS.
Tried already to reflash the phone without luck using RSD Lite (downloaded the SBF through http://and-developers.com/sbf:milestone - the 'official' Cellcom IL SBF that was there...)
anyway - i can still access the bootloader which tells me the phone is not fully bricked, however i can't seem to find any proper SBF so it'll reflash itself back to an operative state.
One major problem here - the phone won't get into recovery mode (i've tried all the combinations i know and that have worked before)
i've also read about wiping the cache and user data however - as far as i know, this can only be done by entering the recovery mode, right?
one last resort i've tried - trying to split the SBF and reconstructing it - still no joy.
does anyone here have any advice or solution o this issue? what kind of SBF do i need? how to manually reconstruct the SBF with proper files? etc.
Thanks in advance,
Tomer
Have you tried loooking into fastboot?
Sometimes a phone wont respond to to adb commands and the recovery is corrupted, but you can still flash partitions using fastboot. I "saved" a Moto dext in this fashion once. Cant remember the exact commands, but it was similar to the adb flash commands. I reflashed the recovery partition and then used recovery to flash a ROM in update.zip format. For some reason RSD lite was failing on this phone.
Just something you may want to look into if you are desperate about saving your MS.
Sent from my Milestone using XDA App
Caz666 said:
Have you tried loooking into fastboot?
Sometimes a phone wont respond to to adb commands and the recovery is corrupted, but you can still flash partitions using fastboot. I "saved" a Moto dext in this fashion once. Cant remember the exact commands, but it was similar to the adb flash commands. I reflashed the recovery partition and then used recovery to flash a ROM in update.zip format. For some reason RSD lite was failing on this phone.
Just something you may want to look into if you are desperate about saving your MS.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Hi Caz666,
well, thought this might actually work, but had no luck.
when i try to flash my phone it does nothing other than showing me 'downloading boot.img' and thats it.
is there anything else to do in order to save my phone? i really like it
I'm also willing to donate through PayPal to anyone who can describe any working method or that can point me to any valid working process...
thanks again.
barvaz_t said:
Hi Caz666,
well, thought this might actually work, but had no luck.
when i try to flash my phone it does nothing other than showing me 'downloading boot.img' and thats it.
is there anything else to do in order to save my phone? i really like it
I'm also willing to donate through PayPal to anyone who can describe any working method or that can point me to any valid working process...
thanks again.
Click to expand...
Click to collapse
are you sure your drivers for the phone are installed properly? what RSD lite version are you using? What system? windows 32 or 64 bits?
vladstercr said:
are you sure your drivers for the phone are installed properly? what RSD lite version are you using? What system? windows 32 or 64 bits?
Click to expand...
Click to collapse
I'm quite sure they're installed properly as i managed to upgrade my bootloader version using the RSDlite.
my system is 32 bits and the drivers are the ones i installed throught the Motorola website. I've first used RSDlite 4.6 but after reading a bit I understood there are some differences between versions hence upgraded to 4.9.
barvaz_t said:
I'm quite sure they're installed properly as i managed to upgrade my bootloader version using the RSDlite.
my system is 32 bits and the drivers are the ones i installed throught the Motorola website. I've first used RSDlite 4.6 but after reading a bit I understood there are some differences between versions hence upgraded to 4.9.
Click to expand...
Click to collapse
Try the 90.78ch bootloader from http://and-developers.com/sbf:milestone ...
"XT702 variant of the 90.78 bootloader (notes from 90.78 apply here too).
It's reported to work on the A853 too. "
You've got nothing to loose on trying this. Let me know!
vladstercr said:
Try the 90.78ch bootloader from http://and-developers.com/sbf:milestone ...
"XT702 variant of the 90.78 bootloader (notes from 90.78 apply here too).
It's reported to work on the A853 too. "
You've got nothing to loose on trying this. Let me know!
Click to expand...
Click to collapse
*** [update]
I'm now on 90.78ch and see no difference whatsoever.
I've now started investigating how to re-compile an older SBF file so it'll contain the new RAMDL
(I want to flash the Brazilian version however it contains only 90.74 RAMDL)
I've compiled a new file, however the checksum is incorrect.
How it is possible to recompile this properly?
Already tried the website, the mirror there is no leading to the bootloader itself but to a wiki site.
i've tried searching almost anywhere i know, but this bootloader is non available to download.
if there's another mirror site such as rapidshare or megaupload - i'd be happy to be pointed towards it..
Hi barvaz_t!
barvaz_t said:
...
somewhere along the way i've updated the bootloader to 90.78 and since then - the phone is stuck in the notorious loop and cannot restart the OS.
...
Click to expand...
Click to collapse
Why did you upgrade the bootloader
barvaz_t said:
...
i've also read about wiping the cache and user data however - as far as i know, this can only be done by entering the recovery mode, right?
...
Click to expand...
Click to collapse
Right, is it possible to boot into recovery on your device by holding 'X' button?
barvaz_t said:
*** [update]
I'm now on 90.78ch and see no difference whatsoever.
I've now started investigating how to re-compile an older SBF file so it'll contain the new RAMDL
(I want to flash the Brazilian version however it contains only 90.74 RAMDL)
I've compiled a new file, however the checksum is incorrect.
How it is possible to recompile this properly?
Click to expand...
Click to collapse
You locked yourself out by upgrading the bootloader to the latest one.
Neither downgrade of bootloader would be possible, nor flashing older firmware SBF's.
Apart from that the milestone uses signature check on certain parts of the firmware. I really doubt that it's possible to tweak/recompile a complete SBF.
Something worth to try, is to flash vulnerable recovery SBF from within bootloader mode using RSDlite.
Here's the link to gitorious: http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
If the link does not work for you, there are also some mirrors of this file floating around. Just search!
I guess this should work, because the recovery SBF is using RAMLDR 90.78 (do know about the sign check during flash, but i guess checksum should be O.K.).
With vulnerable recovery properly installed, you might then use OpenRecovery to check your system and restore to some working state.
Good luck!
scholbert
scholbert said:
Hi barvaz_t!
Why did you upgrade the bootloader
Right, is it possible to boot into recovery on your device by holding 'X' button?
You locked yourself out by upgrading the bootloader to the latest one.
Neither downgrade of bootloader would be possible, nor flashing older firmware SBF's.
Apart from that the milestone uses signature check on certain parts of the firmware. I really doubt that it's possible to tweak/recompile a complete SBF.
Something worth to try, is to flash vulnerable recovery SBF from within bootloader mode using RSDlite.
Here's the link to gitorious: http://gitorious.org/droid/openrecovery/blobs/master/zips/SHOLS/vulnerable_recovery.sbf
If the link does not work for you, there are also some mirrors of this file floating around. Just search!
I guess this should work, because the recovery SBF is using RAMLDR 90.78 (do know about the sign check during flash, but i guess checksum should be O.K.).
With vulnerable recovery properly installed, you might then use OpenRecovery to check your system and restore to some working state.
Good luck!
scholbert
Click to expand...
Click to collapse
Thanks Scholbert for the detailed answer.
the link you gave directs to an image the RSDlite cannot flash (=error validating image).
If your interntion was that I'm supposed to flash the vulnerable recovery only, than bad news - It's already 'installed' on my device (and it shows no error whatsoever during this installation..)
Well, thanks again for trying to help, I think I'm officially out of suggestions or options here unless anyone can give further advice...
barvaz_t said:
...
If your interntion was that I'm supposed to flash the vulnerable recovery only, than bad news - It's already 'installed' on my device (and it shows no error whatsoever during this installation..)
...
Click to expand...
Click to collapse
So can you still enter recovery?
Regards,
scholbert
No, never did (since the upgrade)
If I had access to the recovery i would have at least managed to install OpenRecovery or something and manage to reflash the device
barvaz_t said:
Hi Caz666,
well, thought this might actually work, but had no luck.
when i try to flash my phone it does nothing other than showing me 'downloading boot.img' and thats it.
is there anything else to do in order to save my phone? i really like it
I'm also willing to donate through PayPal to anyone who can describe any working method or that can point me to any valid working process...
thanks again.
Click to expand...
Click to collapse
Did you try to fastboot flash only the boot.img? What about recovery? I seem to remember flashing a recovery.img on the dext...but this was last year. I may be wrong but i believe i flashed only a recovery image and then was able to access the recovery (which would allow all sorts of additional goodies).
I find it strange that fastboot reports only downloading. I seem to remember some error messages and timeouts?
Sent from my Milestone using XDA App
Caz666 said:
Did you try to fastboot flash only the boot.img? What about recovery? I seem to remember flashing a recovery.img on the dext...but this was last year. I may be wrong but i believe i flashed only a recovery image and then was able to access the recovery (which would allow all sorts of additional goodies).
I find it strange that fastboot reports only downloading. I seem to remember some error messages and timeouts?
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Nope.
trying to flash the recovery / boot images only results in the message 'downloading...' and nothing (waited for like 3 hours..)
when I terminate the action by Ctrl+C and then trying again - the message is instantly 'FAILED..' along with specification that the action of sending the command has failed.
I'm literaly out of ideas, don't know what to do..
Sent from my Milestone using XDA App
I am starting to think that there is something wrong with your device (like broken hardware).
In all my experimenting with rsd/fastboot, i did not once get a "hang". I would get checksum/signature errors, size errors, etc...but i always got some type of error code or status.
This is on 3 different Mot devices that run Android.
Sorry
Sent from my Milestone using XDA App
Caz666 said:
I am starting to think that there is something wrong with your device (like broken hardware).
In all my experimenting with rsd/fastboot, i did not once get a "hang". I would get checksum/signature errors, size errors, etc...but i always got some type of error code or status.
This is on 3 different Mot devices that run Android.
Sorry
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
The device was working fine before upgrading the bootloader, so it seems that this is not a hardware issue.
Either way - guess i'll be taking it to a lab and let them figure this out..
idea
is the milestone n droid from usa same sbf file used if so i have the right sbf file i found i had couple times i had to reinstall to stock if u want to try it i can email it it work for me saved me from bricks its rooted phone just fyi
streetracer89101 said:
is the milestone n droid from usa same sbf file used if so i have the right sbf file i found i had couple times i had to reinstall to stock if u want to try it i can email it it work for me saved me from bricks its rooted phone just fyi
Click to expand...
Click to collapse
@streetracer89101 - no, as far as i know Droid and Milestone use different firmware so it won't help unfortunately. Not that it would matter if I did flash my device - it's not like I can use it anyway..
Thanks again for trying to help out
Tomer
90.78ch bootloader
Hello, I really need the bootloader 90.78ch maybe you can me it someone give Many Thanks
300zxtt said:
Hello, I really need the bootloader 90.78ch maybe you can me it someone give Many Thanks
Click to expand...
Click to collapse
Attached. Enjoy

Xperia Z will not update, what steps can I take to get the proper firmware on it?

Hi folks, I have an Xperia Z and its still stuck at 4.1.2
It's a prototype model, I've used the phone now for months and its been working great despite the lack of updates but I'm hoping it can have the latest software like the rest of the phones out there.
The bottom of the phone has C6606 written on it but the image on the screen shows C6616. Any suggestions would be appreciated.
tinodevoe said:
Hi folks, I have an Xperia Z and its still stuck at 4.1.2
It's a prototype model, I've used the phone now for months and its been working great despite the lack of updates but I'm hoping it can have the latest software like the rest of the phones out there.
The bottom of the phone has C6606 written on it but the image on the screen shows C6616. Any suggestions would be appreciated.
Click to expand...
Click to collapse
can you take a screenshot of the 6616 screen? and can you go to the firmware by customization thread and follow the instructions? what is your cust.# ?
Thanks for the reply. l've PM'd you a link to the screen shot since I can't post any links on the forum yet. I'll check out the customization thread.
tinodevoe said:
Thanks for the reply. l've PM'd you a link to the screen shot since I can't post any links on the forum yet. I'll check out the customization thread.
Click to expand...
Click to collapse
I think you can flash c6606 Software without problems... Maybe even of C6603 via Flashtool.
tinodevoe said:
Thanks for the reply. l've PM'd you a link to the screen shot since I can't post any links on the forum yet. I'll check out the customization thread.
Click to expand...
Click to collapse
OK, that is really very strange. You could try to contact DoomLord or Apollo89, they have knowledge of such things.
Are you rooted? Can you do a CWM Backup? I suggest having a full backup before flashing another rom. So in case you need it, you can flash it back.
I am not sure if you have the same kernel as the rest of us. If you can not do a CWM backup, and are not rooted, you need to find a way to extract the file "boot.img" from the phone. This is the kernel, which you can easily flash back. But for this operation, a bootloader unlock will most probably be necessary.
If you can get no help from Doom or Apollo and can not extract boot.img, you might need to flash hoping for luck, or stay on the firmware you have.
Disclaimer: I might be much too paranoid, after all your phone seems to have the same hardware as the normal one, and a flash of a 10.4.B.0.569 ROM should be no problem. I just don't want to be the one that did not warn you and be responsable for a broken phone...
===============================================================
EDIT: Just had a look at the thread, C6616 is bell Canada, if you had found that, you could have reported back and told us that you solved the problem.
===============================================================
thanks for the advice. I still haven't tried anything with the phone. I've unlocked and flashed the firmware on my old Galaxy Nexus which for some reason also never updated (bought directly from Bell) but this one trying to read through all the information I'm having some trouble deciding on which method to use and where to really start.
If someone has a simple tutorial on flashing these phones please do share, otherwise I might just leave it as is and by the latest Nexus when this phone's done.
tinodevoe said:
thanks for the advice. I still haven't tried anything with the phone. I've unlocked and flashed the firmware on my old Galaxy Nexus which for some reason also never updated (bought directly from Bell) but this one trying to read through all the information I'm having some trouble deciding on which method to use and where to really start.
If someone has a simple tutorial on flashing these phones please do share, otherwise I might just leave it as is and by the latest Nexus when this phone's done.
Click to expand...
Click to collapse
Here is the link where its all explained http://forum.xda-developers.com/showthread.php?t=2275632
Also there is this video http://www.youtube.com/watch?v=j8EQmufr0lw
You need to download latest flashtool and latest firmware FTF for your model and follow instructions, really not hard, hardest part is to w8 untill all that downloads from internet
N1k0la89 said:
Here is the link where its all explained http://forum.xda-developers.com/showthread.php?t=2275632
Also there is this video http://www.youtube.com/watch?v=j8EQmufr0lw
You need to download latest flashtool and latest firmware FTF for your model and follow instructions, really not hard, hardest part is to w8 untill all that downloads from internet
Click to expand...
Click to collapse
sorry to sound dumb, but I can't figure out which firmware to select for my phone. Can someone please recommend a link for the correct file to flash this with? Also does it matter which generic firmware I use? I don't want to get the Bell firmware and end up with all the bloatware they have on there. I'd prefer as close to a clean firmware as possible so I can start getting the latest updates onto this phone.
tinodevoe said:
sorry to sound dumb, but I can't figure out which firmware to select for my phone. Can someone please recommend a link for the correct file to flash this with? Also does it matter which generic firmware I use? I don't want to get the Bell firmware and end up with all the bloatware they have on there. I'd prefer as close to a clean firmware as possible so I can start getting the latest updates onto this phone.
Click to expand...
Click to collapse
I think all Generic firmwares have the same "bloatware" app in common and all carrier branded firmwares have their carrier specific apps, so just choose a generic firmware and then remove all unuseful bloatware apps (if you go root).
akisg said:
I think all Generic firmwares have the same "bloatware" app in common and all carrier branded firmwares have their carrier specific apps, so just choose a generic firmware and then remove all unuseful bloatware apps (if you go root).
Click to expand...
Click to collapse
I finally just tried one method, following the guide here; http://forum.xda-developers.com/showthread.php?t=2240614
I installed flashtool and installed the stock Bell software, http://forum.xda-developers.com/showthread.php?t=2390178
It looked like everything went fine and when checking system updates it showed 4.3 was finally available!
but then after it downloaded the file I tried to install and it just gave me an error message :crying:
So what would be the next step for me?
tinodevoe said:
I finally just tried one method, following the guide here; http://forum.xda-developers.com/showthread.php?t=2240614
I installed flashtool and installed the stock Bell software, http://forum.xda-developers.com/showthread.php?t=2390178
It looked like everything went fine and when checking system updates it showed 4.3 was finally available!
but then after it downloaded the file I tried to install and it just gave me an error message :crying:
So what would be the next step for me?
Click to expand...
Click to collapse
Any info about that error??
Why not flash to 4.3 directly with flashtool or to 4.2 and then upgrade to 4.3?
Also try a fresh install by wiping data (if you have already a backup of them of course) it maybe helps..
akisg said:
Any info about that error??
Why not flash to 4.3 directly with flashtool or to 4.2 and then upgrade to 4.3?
Also try a fresh install by wiping data (if you have already a backup of them of course) it maybe helps..
Click to expand...
Click to collapse
I've tried a couple times now to update that system update, its 10.4.B.0.569, once it starts to install it goes to the robot install logo at the startup for a second then starts the phone right away without doing the full install. The message on screen is simply "could not install".
i'll try a factory reset then directly to 4.3. I'm assuming I can use the same method as before or do I need to look into rooting the phone now?
tinodevoe said:
I've tried a couple times now to update that system update, its 10.4.B.0.569, once it starts to install it goes to the robot install logo at the startup for a second then starts the phone right away without doing the full install. The message on screen is simply "could not install".
i'll try a factory reset then directly to 4.3. I'm assuming I can use the same method as before or do I need to look into rooting the phone now?
Click to expand...
Click to collapse
As soon you are installing a stock rom, you don't have to worry about root.
But if you wanna root, your only choice is to flash a 4.2 rom, root it with a method of your choice and then upgrade to a prerooted 4.3.
Can someone please point me in the right direction to a FW that works with my phone? the only one that I seem to be able to use with flashtool is this one here which is 4.1.2. http://forum.xda-developers.com/showthread.php?t=2390178
however it won't let me update the system!
I'm guessing that I need a C6616 firmware to make this work, but I also tried this one, http://forum.xda-developers.com/showthread.php?t=2612159 and I get an error in flashtools, in red writing 'ERROR - error flashing. Aborted'.
I've been searching on here and all the other firmwares are 6603 which I tried a couple and again errors in flashtools.
trying again with that 4.1.2 its flashing it but its not the firmware I need!
ok, finally got one of them to work! I'm not sure what it was but I downloaded a bunch of firmwares until one of them finally updated me to 4.3.
thanks for all the help!

[Q] Help me, please, Galaxy S5 stuck in bootloop and odin isn't flashing!

Help me XDA, you're my only hope!
In attempt to flash a custom recovery to my AT&T Galaxy S5 (SM-G900A), odin failed to flash it. After a while, I tried to root my phone after other forums/threads said I needed to. I tried towelroot, didn't work for $#!t. And the point of no return came when another forum said to flash a custom firmware to help TR, so I did. It failed. Then I decided to give up, but it got stuck in a bootloop, well, if you consider attempting to boot, giving up, and rebooting itself into bootloader a bootloop. And that was followed by attempting to flash stock firmware, which odin couldn't do anything. So, I've tried everything:
Kies won't detect my phone, or it will say it's unsupported
Odin must be broken or my phone is f***ed, because almost immediately, odin will say FAIL
Anti-Virus has been disabled this whole time
So if anyone reading this knows what they're doing, please help me out with this.
Matthew98405 said:
Help me XDA, you're my only hope!
In attempt to flash a custom recovery to my AT&T Galaxy S5 (SM-G900A), odin failed to flash it. After a while, I tried to root my phone after other forums/threads said I needed to. I tried towelroot, didn't work for $#!t. And the point of no return came when another forum said to flash a custom firmware to help TR, so I did. It failed. Then I decided to give up, but it got stuck in a bootloop, well, if you consider attempting to boot, giving up, and rebooting itself into bootloader a bootloop. And that was followed by attempting to flash stock firmware, which odin couldn't do anything. So, I've tried everything:
Kies won't detect my phone, or it will say it's unsupported
Odin must be broken or my phone is f***ed, because almost immediately, odin will say FAIL
Anti-Virus has been disabled this whole time
So if anyone reading this knows what they're doing, please help me out with this.
Click to expand...
Click to collapse
First off you need to give more info about your phone. What build are you on 5.0, 4.4.4 etc. How did you get on that build. Ota update or custom update. We can't really help you unless we know what your running.
dirtydodge said:
First off you need to give more info about your phone. What build are you on 5.0, 4.4.4 etc. How did you get on that build. Ota update or custom update. We can't really help you unless we know what your running.
Click to expand...
Click to collapse
I had 5.0 via OTA
Matthew98405 said:
I had 5.0 via OTA
Click to expand...
Click to collapse
I'll search and see what I can find. Try searching for the OC4 firmware. if I find something i'll post it here
Matthew98405 said:
Help me XDA, you're my only hope!
In attempt to flash a custom recovery to my AT&T Galaxy S5 (SM-G900A), odin failed to flash it. After a while, I tried to root my phone after other forums/threads said I needed to. I tried towelroot, didn't work for $#!t. And the point of no return came when another forum said to flash a custom firmware to help TR, so I did. It failed. Then I decided to give up, but it got stuck in a bootloop, well, if you consider attempting to boot, giving up, and rebooting itself into bootloader a bootloop. And that was followed by attempting to flash stock firmware, which odin couldn't do anything. So, I've tried everything:
Kies won't detect my phone, or it will say it's unsupported
Odin must be broken or my phone is f***ed, because almost immediately, odin will say FAIL
Anti-Virus has been disabled this whole time
So if anyone reading this knows what they're doing, please help me out with this.
Click to expand...
Click to collapse
if you can go into download mode then don't worry you can download another official firmware & flash it.
The firmware you tried & failed may be corrupt file so download new one & try.
Make sure your battery is more than 50%.if not know the battery level do not flash go to repair centre.
Sent from my SM-G900H using xda Forum
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
You can try this. Make sure you are using Odin 3.09. You will need the OC4 stock partitions located at the bottom of the first post. That might work.
I just thought of this, does it matter what cable I use?
(Galaxy S5 USB 3.0 cable or standard micro USB)
Because I just used a regular cable and it worked!
Matthew98405 said:
I just thought of this, does it matter what cable I use?
(Galaxy S5 USB 3.0 cable or standard micro USB)
Click to expand...
Click to collapse
It don't matter. As long as Itty is a good working cable
Wait, now it's stuck on the AT&T logo.
Yay, I'm in
Now restoring
Matthew98405 said:
Wait, now it's stuck on the AT&T logo.
Yay, I'm in
Now restoring
Click to expand...
Click to collapse
So your back up and running now?
dirtydodge said:
So your back up and running now?
Click to expand...
Click to collapse
Yup, and I restored everything!
Any idea why odin kept failing to flash a custom recovery?
Matthew98405 said:
Yup, and I restored everything!
Any idea why odin kept failing to flash a custom recovery?
Click to expand...
Click to collapse
Because your running 5.0 ota. You can't root that version yet plus they only custom recovery that we have on the AT&T S5 is either safestrap or Flashfire which is still in testing faze. You'll need to wait til you can root the ota 5.0 since it has different bootloader.
Ok, thanks, so I can stop messing up my phone.
Matthew98405 said:
Wait, now it's stuck on the AT&T logo.
Yay, I'm in
Now restoring
Click to expand...
Click to collapse
How did you get it to restore? Im stuck at a soft brick on my s5 at&t with the 5.0 ota bootloader. Please help
---------- Post added at 07:48 AM ---------- Previous post was at 07:12 AM ----------
Matthew98405 said:
I had 5.0 via OTA
Click to expand...
Click to collapse
If u need help i found solution of the same problem. lemme know if u do
sir i have tried to downgrade my galaxy s5 at&t by odin
but odin fails and i,m still stuck on firmware error ..
what i can i do?
shreesam09 said:
sir i have tried to downgrade my galaxy s5 at&t by odin
but odin fails and i,m still stuck on firmware error ..
what i can i do?
Click to expand...
Click to collapse
What firmware were you on originally? Sounds like you we're on 5.0 or above . If so you will have to flash a pure stock rom of the same back to it . And no rooting for any thing above 4.4.4
Sent from my SM-G900F using XDA-Developers mobile app

C6903 - Baseband Unknown Fix

Hi Experts,
I have searched the forum and after flashing for three sleepless nights, I am still struck with the unknown baseband issue.
The details are:
C6903
BL Unlocked & now its locked using Flashtool (DRM or TA backup is unavailable )
Currently the phone is struck in boot loop in .534
Used Flashtool ver. 0.9.22.3 & 0.9.18.6
Latest EMMA & Xperia Companion
My phone hanged when listening to the music and when I force restarted the unknown baseband showed up. While flashing I got the baseband back after flashing .518 however it hanged again after two days and I lost the BB
Now I am struck in boot loops on .534 and .518 both. I can boot into .290 successfully. Can someone please guide me to the correct method of restoring my IMEI permanently.
P.S. As per my short experience with C6903, I believe something stops the boot of .534 and .518 after first boot. Means I was not able to boot into .534 but accidentally when I flashed .518, my phone booted successfully. However now I am unable to boot into .518. May be I am missing the piece of puzzle that an expert can provide.
Thanks in advance~
D-r-e-a-m-e-r said:
Hi Experts,
I have searched the forum and after flashing for three sleepless nights, I am still struck with the unknown baseband issue.
The details are:
C6903
BL Unlocked & now its locked using Flashtool (DRM or TA backup is unavailable )
Currently the phone is struck in boot loop in .534
Used Flashtool ver. 0.9.22.3 & 0.9.18.6
Latest EMMA & Xperia Companion
Thanks in advance~
Click to expand...
Click to collapse
hi , read here and try reflash use [NUT]'s 14.1.G.1.534 FTF , hope its help.
iedafarha said:
hi , read here and try reflash use [NUT]'s 14.1.G.1.534 FTF , hope its help.
Click to expand...
Click to collapse
Thanks for your tip but I have already tried and still get struck in bootloop.
No .534 FTF has booted until now and I have used 6 of them already...
An update is that I have rooted 4.4.4 and installed recovery...
can someone tell me where can I get .534 zip to flash as the files I have are giving me verification error on TWRP.
Thanks in advance...
I have tried to use NUT fix but the files are not available for downloading.
I would really appreciate if someone can direct me to the correct path. I am almost giving up now...
http://forum.xda-developers.com/showthread.php?t=2687443
D-r-e-a-m-e-r said:
I have tried to use NUT fix but the files are not available for downloading.
I would really appreciate if someone can direct me to the correct path. I am almost giving up now...
http://forum.xda-developers.com/showthread.php?t=2687443
Click to expand...
Click to collapse
May be file deleted , other options you can create flash zip using PRFCreator , search and download ftf file from here .
iedafarha said:
May be file deleted , other options you can create flash zip using PRFCreator , search and download ftf file from here .
Click to expand...
Click to collapse
Hi again, Really appreciate your help.
I have tried flashing a number of files but still in vain. What I really can't understand is .518 was the last 4.2.2 rom that booted successfully on my phone and brought my baseband back. Now .534 and .518 are both ending in a bootloop at Sony animation Really driving me crazy...
As a side note, can you tell me if the modem files in the link below are useful for this issue?
https://github.com/SonyAosp/vendor_qcom_firmware/tree/n/honami/C6903
By the way I am really amazed with the Z1 ability to handle abuse that I have thrown at it during the last 2 weeks
Changing phone is not an option for me right now. Using Nokia 1100 after a long time seems very uncomfortable and can't do it for long
D-r-e-a-m-e-r said:
By the way I am really amazed with the Z1 ability to handle abuse that I have thrown at it during the last 2 weeks
Changing phone is not an option for me right now. Using Nokia 1100 after a long time seems very uncomfortable and can't do it for long
Click to expand...
Click to collapse
Anyone please...
Experts plzzz...
D-r-e-a-m-e-r said:
Experts plzzz...
Click to expand...
Click to collapse
I am still looking for a solution to install JB without bootloop
Bump...
D-r-e-a-m-e-r said:
I am still looking for a solution to install JB without bootloop
Click to expand...
Click to collapse
Lol why jb. Don't you want KitKat lollipop??
Heck even nougat with unlocked bootloader
gauravbhakuni90 said:
Lol why jb. Don't you want KitKat lollipop??
Heck even nougat with unlocked bootloader
Click to expand...
Click to collapse
I need to fix my baseband issue. That can only be done with JB.
D-r-e-a-m-e-r said:
I need to fix my baseband issue. That can only be done with JB.
Click to expand...
Click to collapse
You can flash Baseband even from lollipop ftf.
gauravbhakuni90 said:
You can flash Baseband even from lollipop ftf.
Click to expand...
Click to collapse
Thx for the tip but its not working.
My SIm was only detected once thats when I installed .518 but it lasted for a day and got held. When I force restarted the phone it was again missing baseband.
Now it isnt booting into .518 or .534.
Experts am I asking something that is un-do-able...
Guys shall I give up fixing this phone
I loved this dead beauty...
Hi, tried to flash with different cables as I don't have Sony original cable with me but the results are still the same. No luck with .534 and baseband is still unknown...
I understand this is a free community and people are free to determine if they wanna help someone or not. However I just wanna know if this is repairable or shall I just forget about repairing it. Any inputs will be highly appreciated.
D-r-e-a-m-e-r said:
Hi, tried to flash with different cables as I don't have Sony original cable with me but the results are still the same. No luck with .534 and baseband is still unknown...
I understand this is a free community and people are free to determine if they wanna help someone or not. However I just wanna know if this is repairable or shall I just forget about repairing it. Any inputs will be highly appreciated.
Click to expand...
Click to collapse
I have realized that the phone does not shuts down with the power button in any bootable rom. Also sometimes the baseband does appear soon after installation but it disappears as sim is inserted. Can someone plz help me understand whats going wrong. I really love this phone...

Fix for baseband/imei on tmo ocx27

hey guys I was able to get the modem pulled from a moto z2 that has the ocx27.1 update.. if you run this flash all it will reinstall ocx27 with the latest modem allowing you to once again use your phone.
Please note that this will wipe your phone
Also note that your baseband will stay empty untill your phone fully boots up into android
https://drive.google.com/file/d/1acf5OC7pGb47DgrPCyCYaMqYvKzuCSV0/view?usp=drivesdk
Sent from my Moto Z (2) using Tapatalk
I was able to get my phone reading sim cards after flashing this, however I have not been able to run the most recent update, any ideas?
rodalorn said:
I was able to get my phone reading sim cards after flashing this, however I have not been able to run the most recent update, any ideas?
Click to expand...
Click to collapse
I haven't figured it out yet. I haven't really tried, I'm on bell so I just flashed the retail ROM
Sent from my Moto Z (2) using Tapatalk
Thank you for this. Worked great. I had a worthless brick after trying to install Magisk. :|
my Moto Z2 Force is locked with t-mobile modem but it is the retail model how do I unlock it Have I tried several ways and I could not ??
Hero
some weeks ago downgrade my z2 and loose baseband, with this phone come back to life :,v
thanks, thank you very much
Saved my phone
Thanks! This is exactly what I needed to get my baseband re-installed.
Is SPRINT available? my phone is oreo,OTA loses IMEI after March security update...
Back on update path
Any T-mobile guys figure out how to get updates to install after flashing this, I tried flashing another firmware after this and lost baseband again.
Edit: I ended up flashing the XT1789-04_NASH_TMO_C_8.0.0_OCX27.109-36_subsidy-TMO_regulatory-DEFAULT_CFC.xml with the OreoFlashAllUtilities then I edited a FlashAll.bat and used it to flash NASH_TMO_C_OCX27.109-51_subsidy-TMO_regulatory-DEFAULT_CFC.xml. rebooted and it started updating to the latest update and made it through 100%.
rodalorn said:
I was able to get my phone reading sim cards after flashing this, however I have not been able to run the most recent update, any ideas?
Click to expand...
Click to collapse
lownslow200sx said:
Any T-mobile guys figure out how to get updates to install after flashing this, I tried flashing another firmware after this and lost baseband again.
Edit: I ended up flashing the XT1789-04_NASH_TMO_C_8.0.0_OCX27.109-36_subsidy-TMO_regulatory-DEFAULT_CFC.xml with the OreoFlashAllUtilities then I edited a FlashAll.bat and used it to flash NASH_TMO_C_OCX27.109-51_subsidy-TMO_regulatory-DEFAULT_CFC.xml. rebooted and it started updating to the latest update and made it through 100%.
Click to expand...
Click to collapse
How did you edited FlashAll.bat?
Is this any different than using the frankin update that combit both sprint and tmobile firmware?
Mine atm show
Android 8.0
Current version: ocxs27.1.3
Security patch level may 1 2018
Kindly send me the flashing procedure for this rom
Not working on me. Still no sim, no wifi, no IMEI.
I'm on tmo variant. Also, don't we need modem.img? Why the flashall.bat don't include it? I checked. Anyway, I edited and include it: still not working.
P.s.should I use a particular flashall ?
goodpanda520 said:
Is SPRINT available? my phone is oreo,OTA loses IMEI after March security update...
Click to expand...
Click to collapse
Any luck getting this fixed? I am in a similar boat
I tried flashing this to no avail---i am seeing the following failures when running the flashall...anyone know how to correct this:
(bootloader) Invalid partition name system__a
FAILED (remote: '')
@elijahaf97, is it possible to re-upload the file?
Following the G drive link, it tells me it was moved to the trash bin.
Thanks.
RaminJ said:
@elijahaf97, is it possible to re-upload the file?
Following the G drive link, it tells me it was moved to the trash bin.
Thanks.
Click to expand...
Click to collapse
Should be good now!
Download works now, thanks!
RaminJ said:
Download works now, thanks!
Click to expand...
Click to collapse
Willl this work my moto z2 force if im on ocsx27.1.5.?
elijahaf97 said:
Should be good now!
Click to expand...
Click to collapse
Could you possibly reupload the file again.

Categories

Resources