What is the number of the version of android from the factory to flash, or where I can download the file. I think it was 2.3.6
Enviado desde mi DROID4 mediante Tapatalk
sebamariano said:
What is the number of the version of android from the factory to flash, or where I can download the file. I think it was 2.3.6
Enviado desde mi DROID4 mediante Tapatalk
Click to expand...
Click to collapse
Factory vetsion depends on bootloader version
Power off, hold volume down button, press power for 5 secs and release.
Device should boot in to AP Fastboot mode
What is complete text on AP Fastboot screen?
Sent from my XT894 using Tapatalk
0a.77.
Enviado desde mi DROID4 mediante Tapatalk
sebamariano said:
0a.77.
Enviado desde mi DROID4 mediante Tapatalk
Click to expand...
Click to collapse
That is not even close to complete.
0a.77 bootloader is jellybean/4.1.2
Device cannot be downgraded
See index for firmware and rsd lite
[INDEX] Development Motorola Droid 4
Sent from my XT894 using Tapatalk
try to install Android 2.3.6 System Version 6.13.219
VRZ_XT894_6.5.1-167_DR4-1_M1-219_1FF_01 (1.18GB) with RSDLite the process slows almost to start, and I get a fail error. that may be.
Enviado desde mi DROID4 mediante Tapatalk
sebamariano said:
try to install Android 2.3.6 System Version 6.13.219
VRZ_XT894_6.5.1-167_DR4-1_M1-219_1FF_01 (1.18GB) with RSDLite the process slows almost to start, and I get a fail error. that may be.
Enviado desde mi DROID4 mediante Tapatalk
Click to expand...
Click to collapse
That version is not compatible with your device.
Sent from my XT894 using Tapatalk
try to install Android 2.3.6 System Version 6.13.219
VRZ_XT894_6.5.1-167_DR4-1_M1-219_1FF_01 (1.18GB) with RSDLite the process slows almost to start, and I get a fail error.
flash after this rom and Motorola Droid 4 Android 4.1.2 VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip, I install fine but I get an error when turned on attached image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hello, because I can not install version 2.3.6 from the factory
Enviado desde mi DROID4 mediante Tapatalk
sebamariano said:
hello, because I can not install version 2.3.6 from the factory
Enviado desde mi DROID4 mediante Tapatalk
Click to expand...
Click to collapse
Hello, device cannot be downgraded from jellybean
Sent from my XT907 using Tapatalk
Related
Good GM2 followers! Today I bring a couple of methods when Google Play gives you an error. Let's begin:
First Method:
- Go to settings
- Applications
- All
- Google Services Framework Play
- Force Quit
- Clear data
- Restart the Mobile
Second Method:
- Go to settings
- Accounts and sync
- Remove from Google
- Change it or put it back
- Reset
Third Method:
- Delete the app
- reinstall
Fourth Method:
- If custom rom
- Wipes
- Flash the latest gapps
Fifth Method:
- Download the app "MarketFix"
- Running it
Sixth Method:
Mod Edit: Na-ah, no warez allowed
I hope that some method solves the problem of market. A greeting and gives +1
SPAM?
arcanister99 said:
good gm2 followers! Today i bring a couple of methods when google play gives you an error. Let's begin:
- go to settings
- accounts and sync
- remove from google
- change it or put it back
- reset
Click to expand...
Click to collapse
what???!!!! You can not do that !
Yes, Sir. You can remove the Google account. I have done it
Enviado desde mi GT-S7275R usando Tapatalk 2
Arcanister99 said:
Yes, Sir. You can remove the Google account. I have done it
Enviado desde mi GT-S7275R usando Tapatalk 2
Click to expand...
Click to collapse
What? Did you mean that you removed google account on S6500D, from settings???!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe it was the translator. I changed the account and disable sync. Then I remove account
Enviado desde mi GT-S7275R usando Tapatalk 2
Arcanister99 said:
Maybe it was the translator. I changed the account and disable sync. Then I remove account
Enviado desde mi GT-S7275R usando Tapatalk 2
Click to expand...
Click to collapse
Also, why you posted in MINI II forum? S6500(D/T/L)
Your phone:
Man, I had an Mini 2 and I did it. I didn't posted nothing before because I didn't have account. I know a lot about Mini 2
Enviado desde mi GT-S7275R usando Tapatalk 2
Arcanister99 said:
Man, I had an Mini 2 and I did it. I didn't posted nothing before because I didn't have account. I know a lot about Mini 2
Enviado desde mi GT-S7275R usando Tapatalk 2
Click to expand...
Click to collapse
You really know a lot about s6500D...
Today via OTA 5.1.1 arrive to n910c Polonia
Confirm dawnloading right now. 747mb
Sent from my SM-N910C using XDA Free mobile app
What CSC/provider?
Sent from my SM-N910C using Tapatalk
Installed! [emoji12]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi SM-N910C mediante Tapatalk
rodalfa said:
Installed! [emoji12] View attachment 3451881View attachment 3451882View attachment 3451884
Enviado desde mi SM-N910C mediante Tapatalk
Click to expand...
Click to collapse
What is configuration version at bottom of about phone menu?
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Finally! We're waiting for reports Battery, new functions, any changes with TouchWiz?
Someone on a polish forum wrote that downgrading to 5.0.1 would brick your phone (similar to S6 case), so be careful.
Rom Polonia
Provide mo...f.... ota zip mirror plz
Also most probably it is 32 bit. Can anyone confirm?
Is it xeo?
Yes it is xeo
Yes its for XEO
ravijani said:
Provide mo...f.... ota zip mirror plz
Also most probably it is 32 bit. Can anyone confirm?
Click to expand...
Click to collapse
anyone??? anything new? themes or anything?
multi user ??? screen pinning? new air command :/
hopefully someone uploads soon. cheers!
ravijani said:
anyone??? anything new? themes or anything?
multi user ??? screen pinning? new air command :/
Click to expand...
Click to collapse
Very exiticed about this. Hie hie.
---------- Post added at 06:49 AM ---------- Previous post was at 06:49 AM ----------
benzxi said:
hopefully someone uploads soon. cheers!
Click to expand...
Click to collapse
Not yet since sammobile.com release it.
Im on poland rom but ota didnt come to me
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Polish forum again:
Changes visible to the naked eye - better signal (comparable with 4.4, when on 5.0.1 was worse), huge improvement of device's responsiveness, no call lag and no recent apps lag.
Click to expand...
Click to collapse
Anyone uploaded the firmware yet?
Until SamMobile does it noone can.
Sent from my SM-N910C using Tapatalk
You can download the 5.0.1 XEO, install with odin and then updated by ota.
True
Sent from my SM-N910C using Tapatalk
I have oneplus 3t with dirty unicorns and Elementalx.
But shows 3000 mah
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
It's just a text string, they didn't make it smart enough to display the correct value depending on your variant of the 3, like SyCreed says nothing to worry about.
Get the app that reads the hardware, not the database.
keaheng said:
Get the app that reads the hardware, not the database.
Click to expand...
Click to collapse
What app?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
liver20 said:
I have oneplus 3t with dirty unicorns and Elementalx.
But shows 3000 mah View attachment 4122652
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
Use AIDA64 app and share the result
vahid-hetfield said:
Use AIDA64 app and share the result
Click to expand...
Click to collapse
Aida64 says 3000. Dirty unicorns with Elementalx
Oos with custom kernel says 3000 battery.
But oos with stock kernel says 3400.
The problem is in unified device tree, i think
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
All good here
Sent from my OnePlus3T using XDA Labs
ilia1985 said:
All good here
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
What room are you on? And what app are you using to find your battery info?
EDIT SCRATCH THAT I FOUND THE APP mine says 3400 but on another app it said 3000
Rebel7022 said:
What room are you on? And what app are you using to find your battery info?
Click to expand...
Click to collapse
OOS Open Beta 5
Sent from my OnePlus3T using XDA Labs
I have had problems with backup restore. I use TWRP 3.1.0.0. I would like to know if TWRP 3.0.2.2 or 3.1.1.0 is more recommended.
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi ZUK Z2121 mediante Tapatalk
Nobody knows?
Enviado desde mi ZUK Z2121 mediante Tapatalk
What exactly is your problem with 3.1.0.0? Restoring backups is working fine, at least for me.
Yes. My problem is restoring backups with TWRP 3.1.0.0. I've tried twice with resurrection remix. And it did not start. And with stock if, but does not work sim card, nor wifi ...
With other mobiles I have never had problems in restoring a backup.
Can it be by having screen lock with pin?
Enviado desde mi ZUK Z2121 mediante Tapatalk
angekcc said:
Yes. My problem is restoring backups with TWRP 3.1.0.0. I've tried twice with resurrection remix. And it did not start. And with stock if, but does not work sim card, nor wifi ...
With other mobiles I have never had problems in restoring a backup.
Can it be by having screen lock with pin?
Enviado desde mi ZUK Z2121 mediante Tapatalk
Click to expand...
Click to collapse
I have this problem too, I can restore anything below android 7 but nothing at 7 or above.
Ossie! said:
I have this problem too, I can restore anything below android 7 but nothing at 7 or above.
Click to expand...
Click to collapse
On this website, although not the same terminal advise the 3.0.2.2.
https://www.technobuzz.net/android-7-0-nougat-twrp-recovery-install/
What I also get a lot of extra is that: TWRP 3.0.2.2 are 46Mb
TWRP 3.1.0.0 occupies 19Mb
TWRP 3.1.1.0 occupies 18Mb
Enviado desde mi ZUK Z2121 mediante Tapatalk
angekcc said:
On this website, although not the same terminal advise the 3.0.2.2.
https://www.technobuzz.net/android-7-0-nougat-twrp-recovery-install/
What I also get a lot of extra is that: TWRP 3.0.2.2 are 46Mb
TWRP 3.1.0.0 occupies 19Mb
TWRP 3.1.1.0 occupies 18MbView attachment 4232825
Enviado desde mi ZUK Z2121 mediante Tapatalk
Click to expand...
Click to collapse
Twrp official
Enviado desde mi ZUK Z2121 mediante Tapatalk
Has anybody tried the Google Stock Image on this device? The CPU is the same as the Mi Pad 4 so it should technically work... right?
I was reading about it, and yes you can flash the same rom from mi pad 4 to an mi pad4 plus!
Enviado desde mi LG-H870 mediante Tapatalk
Any link for the stock image?
motes said:
I was reading about it, and yes you can flash the same rom from mi pad 4 to an mi pad4 plus!
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
Have you tested does it work with the twrp posted here.
minilandl said:
Have you tested does it work with the twrp posted here.
Click to expand...
Click to collapse
I still waiting for the mi pad, and i don't tested yet but in the xiaomi.eu web site the download link says mipad4/4plus!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi LG-H870 mediante Tapatalk
Will the fingerprint scanner still work on non MIUI roms?
motes said:
I still waiting for the mi pad, and i don't tested yet but in the xiaomi.eu web site the download link says mipad4/4plus! View attachment 4631740
Thanks just chevking to make sure. I have checked the mokee thread and the twrp version and it seems that mokee can be installed on both devices same as TWRP
Click to expand...
Click to collapse
minilandl said:
motes said:
I still waiting for the mi pad, and i don't tested yet but in the xiaomi.eu web site the download link says mipad4/4plus! View attachment 4631740
Thanks just chevking to make sure. I have checked the mokee thread and the twrp version and it seems that mokee can be installed on both devices same as TWRP
Click to expand...
Click to collapse
did you install?
does fingerprint scanner work?
Click to expand...
Click to collapse
blcistheking said:
minilandl said:
did you install?
does fingerprint scanner work?
Click to expand...
Click to collapse
no I don't have the device just reseaching how to flash roms etc if I ever do I will post about my success.
Click to expand...
Click to collapse
I'm using https://download.pixelexperience.org/treble_gsi/ on mine.
Fingerprint works just fine.
Magnetic cover doesn't however. I think there's one other thing that's broken, but I can't recall what it is.