Database Develop

First hard drop...

So i just dropped my phone from head height onto a concrete floor
It slipped out of my hand while i was talking as i bumped into someone.
.
.
.
.
It survived! no marks, i'm not sure how it landed, but it was screen down on the floor when i found it.
Has anyone else dropped theirs and how has it managed? I'm sure we'd all like to know how much abuse it actually can handle.

same happens here...
and it dropped exactly the same way as yours did..haah
just like yours, no scratch and yet nth bad happened yet

Would have been even funnier if u were the one i bumped into lol
I think the cut off corners on the back really help. The back is heavier due to the battery and if it falls on a corner it seems to fall on the back cut off corner.

What a nightmare

i had 2 accidents. one of them "bent" the soft aluminum in the corner. still black and still working. the second one was so powerful that dissembled my diamond in 3 pieces: diamond (lol), cover and battery. i found the battery 2 meters from the disaster scene. this PDA seems to be a sturdy SOB..
any way, don't try this at home folks!!!1

Oh my preciousssss...

KukurikU said:
i had 2 accidents. one of them "bent" the soft aluminum in the corner. still black and still working. the second one was so powerful that dissembled my diamond in 3 pieces: diamond (lol), cover and battery. i found the battery 2 meters from the disaster scene. this PDA seems to be a sturdy SOB..
any way, don't try this at home folks!!!1
Click to expand...
Click to collapse
Sounds like it's dangerous there rehovot
Nadavi

pedmond said:
Oh my preciousssss...
Click to expand...
Click to collapse
hahaha ! smechere, vezi filme interzise....
Sounds like it's dangerous there rehovot
Click to expand...
Click to collapse
אולם מסוכן...

Nice to know it can survive a few knocks! It must have been one of those oh **** moments. Did the guy actually stop to apologise, I would have probably thumped him one, not that i advocate physically attacking someone LOL
So was it rough concrete, like paving stones, or something smooth like a tilled floor?

I sat in a recliner chair outside the other day and lay back. My diamond slipped out of my pocket onto a concrete floor from about a height of 30-40cm. There's now a small (very small) dent in the aluminium bit, bottom right, near the stylus slot.
It's hardly noticable, but I was gutted at the time!

imranbashir_uk said:
Nice to know it can survive a few knocks! It must have been one of those oh **** moments. Did the guy actually stop to apologise, I would have probably thumped him one, not that i advocate physically attacking someone LOL
So was it rough concrete, like paving stones, or something smooth like a tilled floor?
Click to expand...
Click to collapse
lol, it was my fault actually.. i was to busy talking on the phone and not paying atention. It was a smooth concrete floor thankfully!

not a diamond but...
Twice now I've had accidents with my Polaris on the running machine. The phone was resting in the slot on the machine while I was running. I must have knocked the headphone cable or something because the phone got yanked from the slot, dropped (about chest height) onto the treadmill and went flying back into the wall behind. Not even a scratch!

OUCH!!
<10 chars>

dropped mine from waist height....
my waist is probably higher than most of your ears lol JOKE lol again but anyways I got a little tiny scratch on the stylus....I guess thats why they give you 2 of those puppies....I love it. You know its a little heavier than most pdas from the metal frame but yes its a tough SOB and also I heard that the screen is made of some kind of really special plexiglass to prevent cracks. I heard you can drop it from a two story building and the glass will not crack!!! I would definately not try this at home but its what I heard....

I dropped it on the way back from the pub!!
The metal bezel now has three deep lines in it on the front side under the hardware buttons Fortunatly its still black
The top of the bezel on the front also has 3 scartches which have exposed the silver metal underneath.
what a disaster!

You remember that James Bond Movie with the evil guy having Diamonds in his face?
Well, my device slipped out of my hands , glided a meter or 2 on the parking ground and has now similar small dots (diamonds) on the lower part and casing.
But no worries, I gonna let "tune" paint & polish my Diamond.
They ask 150 NTD (5US) for refurbushing a PDA phone here

You guys gave me the creeeepssss.

Hmm i thought it was just me at first, but i've been checking all day, and my touch screen has become ALOT more sensative since the drop.
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
I hope it doesnt die on my now :s

someone1234 said:
Hmm i thought it was just me at first, but i've been checking all day, and my touch screen has become ALOT more sensative since the drop.
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
I hope it doesnt die on my now :s
Click to expand...
Click to collapse
Probably your fall activaded the Threshold tweak!

someone1234 said:
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
Click to expand...
Click to collapse
LOL, thats another undocumented mod that can be added to the sticky!

Do you have OCD? (obsessive cleaning disorder)

I have it. Its kinda bad, and good at the same time. When I washed up in the morning, I must vacuum our it bothers me.
When I am in the car, if there is too many drinks/bottles, I have to throw them away.
When I am at my desk, everything has to be straight and minimal stuff on it. Maybe like a water bottle and a cable, but that's pushing it.
Even my desktop (computer) is clean all I have on my desktop is the recycle bin and whatever projects I am working on.
Sent from my Samsung Vibrant using the xda-developers app.

I just did the hoovering and cleaned up a bit Haha

hell no.
My room is the messiest place in England.

JimJam707 said:
hell no.
My room is the messiest place in England.
Click to expand...
Click to collapse
No mine is!

JimJam707 said:
hell no.
My room is the messiest place in England.
Click to expand...
Click to collapse
flyboyovyick said:
No mine is!
Click to expand...
Click to collapse
You two have obviously never been in the Queen's bedroom then hehe

MacaronyMax said:
You two have obviously never been in the Queen's bedroom then hehe
Click to expand...
Click to collapse
I have no idea if that meant to sound dodgy, but it did

I have ocd, but I'm also lazy so it balances out

I do have it, but my wife and kids doesn't so that's the balance.

JimJam707 said:
I have no idea if that meant to sound dodgy, but it did
Click to expand...
Click to collapse
Hehe Yeah it was

I guess the stereotypes about Mods are that they are lazy. ;D Just got done organizing some stuff.

I have a habit of polishing the glass screen on my hero with a microfibre cloth a lot... does that count? It does still look nice despite being almost a year old...

pulser_g2 said:
I have a habit of polishing the glass screen on my hero with a microfibre cloth a lot... does that count? It does still look nice despite being almost a year old...
Click to expand...
Click to collapse
Same Here I dont even use a screen protector I just treat it well

I've always had a minimal OCD attitude, but ARMY Basic Training sure as hell fixed that.. due to everything having to be 10,000% organized...
Now, when it comes to home, I usually only go OCD on the rooms I access the most (except for my desk area)... Living Room, Kitchen, Office, and my Bedroom.
BUT :: When it comes to my phone(s)... I'm very OCD... possibly too much. I buy new screen protectors for each device atleast twice a month, I despise smudges, so I RARELY actually touch my screen with my fingers. And even when I'm holding my main phone, I always have a cleaning cloth between my palm and the phone. It's actually quite sad.

I am also OCD with my my phone too. Every time I see a smudge on it, I wipe it, right away. I also own about 10+ microfiber clothes for my computer, phone, and iPad.
Once I get done eating, I don't touch my phone, I must clean my hands before I even take it out my pocket.
Whenever my friends ask to see my phone, I ask if there hands are greasy/dirty. I rarely give it to them because of fear they might break it.
When I had my iPhone, I had 4 cases because none of them were good enough to protect.
I am also going to order a tough case from Case-Mate, since my barely there isn't protecting much.
I ordered some Realooks when I first got my phone, since I didn't want to scratch them phone.
That's my story of OCDness. yay

pulser_g2 said:
I have a habit of polishing the glass screen on my hero with a microfibre cloth a lot... does that count? It does still look nice despite being almost a year old...
Click to expand...
Click to collapse
+1
Captainkrtek said:
Same Here I dont even use a screen protector I just treat it well
Click to expand...
Click to collapse
+1
SamVib said:
I am also OCD with my my phone too. Every time I see a smudge on it, I wipe it, right away. I also own about 10+ microfiber clothes for my computer, phone, and iPad.
Click to expand...
Click to collapse
+1 Pretty much exactly the same but i only have 2 microfibre clothes lol

There's no need for a screen protector on most of the new hTC's with glass screens (hero etc). So I just polish the fingerprints off with my m'fibre cloth
There was an awesome youtube video of a guy attacking his hero with a stanley knife... No damage even after attacking it with the knife, a bunch of keys, an some coins

The grip test

Something for people to try:
See if you can keep the phone from sliding holding onto only the glass. So put your thumb on one side and your fingers on the other and pinch then hold the phone up vertical. Squeeze as hard as you want (but dont break the LCD), I bet nobody can keep the phone from slowly sliding down no matter how hard they try. I recommend holding it near the Nexus logo so you can see it move since it will be sliding very very slowly. Try both hands.
Ive noticed that this thing simply sticks to NOTHING, this Gorilla Glass 2 surface is very slippery and I wish they would have gone for something more grippy on the back since my phone has slid off things that are virtually flat a few times already. It seems like any amount of gravity will cause this thing to slide.

idividebyzero said:
Something for people to try:
See if you can keep the phone from sliding holding onto only the glass. So put your thumb on one side and your fingers on the other and pinch then hold the phone up vertical. Squeeze as hard as you want (but dont break the LCD), I bet nobody can keep the phone from slowly sliding down no matter how hard they try. I recommend holding it near the Nexus logo so you can see it move since it will be sliding very very slowly. Try both hands.
Ive noticed that this thing simply sticks to NOTHING, this Gorilla Glass 2 surface is very slippery and I wish they would have gone for something more grippy on the back since my phone has slid off things that are virtually flat a few times already.
Click to expand...
Click to collapse
Yeah, the iPhone 4 and 4S had this problem too. If you went naked they would slide off anything and everything, even things you thought were flat. Hopefully invisible shield comes out with a back protector. I hate Invisible shields on the front because they're slightly tacky, but for the back it would be great at protecting and preventing the phone from sliding.

Isn't the glass suppose to be slippery? You want your finger to glide across it easily while using the phone. Not sure what the issue is, who grips their phone this way? If you do, stop it.

Not having any issue gripping the phone this way. On the other hand I have noticed the phone being susceptible to "death grip".

Yeah I've found on numerous occasions where I would set my phone down on what I THOUGHT was a flat surface, walk away and come back only to find my phone on the floor. This thing I'd crazy slippery. I'm picking up a bumper from someone off Craigslist tonight for a good deal and am hoping it will help at least a little.
Sent from my Nexus 4 using xda premium

I can just say it again .. Bumper FTW!
But actually, these issues are crazy ... slippery phone .. what the heck.

Ravynmagi said:
Isn't the glass suppose to be slippery? You want your finger to glide across it easily while using the phone. Not sure what the issue is, who grips their phone this way? If you do, stop it.
Click to expand...
Click to collapse
threeclaws said:
Not having any issue gripping the phone this way. On the other hand I have noticed the phone being susceptible to "death grip".
Click to expand...
Click to collapse
"You're just holding it the wrong way!"
What's the death grip on the N4?
From iFixit's tear down they show contact points of the antennas in the upper third of the back plate. But they never took the back apart to see where the leads go. Is the death grip the top half of the phone? If so that's good, because with the size of the N4 people will most likely grip it along the bottom half and along the bottom edge.

I called it an issue, but I actually like it slippery in the back.

I totally love the feel of the phone. I just thought it was crazy how it would just slide off of seemingly flat surfaces. I had my closed laptop sitting on the dining room table, phone on top of the laptop. Walked away for a few minutes and came back to find the phone on the floor. Instantly blamed my wife. Lol.
Sent from my Nexus 4 using xda premium

I did your test and my phone didn't move a cm...

I like it slippery in the back also
Sent from my Desire HD using xda app-developers app

Use a soap for oily skin.

trent25 said:
"You're just holding it the wrong way!"
What's the death grip on the N4?
From iFixit's tear down they show contact points of the antennas in the upper third of the back plate. But they never took the back apart to see where the leads go. Is the death grip the top half of the phone? If so that's good, because with the size of the N4 people will most likely grip it along the bottom half and along the bottom edge.
Click to expand...
Click to collapse
I when I hold the phone 2 handed (eg when surfing the web) the bars drop dramatically and in places with weak signal just holding the phone (bottom half one handed like for a phone call) I'll completely lose signal. Actually I'd say in general, compared to my HD2 and Sensation the signal strength is poor on this phone.

threeclaws said:
I when I hold the phone 2 handed (eg when surfing the web) the bars drop dramatically and in places with weak signal just holding the phone (bottom half one handed like for a phone call) I'll completely lose signal. Actually I'd say in general, compared to my HD2 and Sensation the signal strength is poor on this phone.
Click to expand...
Click to collapse
x2. I am waiting it out to do more testing and see what happens with updates but I have also noticed the dramatic signal loss depending on how you hold the phone. At my house I consistantly get 2-3 bars on my Lumia 920 (and did on my S3, Note, etc). With the N4 I get 3 occasionally, but most of the tiem if I am holding the phone its at 1 bar, and if I hold it in certain ways loses signal all together.

My phone dropped too. Stupid slipper back
Sent from my Nexus 4 using xda app-developers app

sieudaochich said:
My phone dropped too. Stupid slipper back
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
any damages?

idividebyzero said:
Try both hands.
Click to expand...
Click to collapse
So we don't build muscle imbalance in our fingers?
Sent from my Nexus 4 using Tapatalk 2

Nexus 4 said:
any damages?
Click to expand...
Click to collapse
No visible damage at all, dropped twice. Once from chair height ~3 feet to wooden floor and once from ~1 foot.
Sent from my Nexus 4 using xda app-developers app

evostevo1 said:
I like it slippery in the back also
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
I bet you do you randy sonofagun!
kinky!
mELIANTE said:
Use a soap for oily skin.
Click to expand...
Click to collapse
i lawled. out of thanks, but yeah, thanks for the laff.

gtg465x said:
Yeah, the iPhone 4 and 4S had this problem too. If you went naked they would slide off anything and everything, even things you thought were flat. Hopefully invisible shield comes out with a back protector. I hate Invisible shields on the front because they're slightly tacky, but for the back it would be great at protecting and preventing the phone from sliding.
Click to expand...
Click to collapse
It's already out

Anyone else have tiny nicks in the aluminium

A tiny gripe for the perfectionists. But I noticed after a day, that I had a couple of tiny little nicks in the aluminium. As the phone had just been lying on my desk and hadn't been taken outside it must have come that way. I didn't see them at first because they are on the edges and not on the back surface. It is very tiny and it was because it caught the light that I noticed it. I remember when the iPhone 5 came out there were scores of people with chips on the black iPhones that showed silver underneath. This is nowhere near as bad as that....just the light catching the fact that the surface is not quite flat. I had the same with an iPhone 4 a few years ago as well. Seems to me that aluminium is very dingable, even in the factory.
Anyone else notice this?

Mines fine so far, no complaints.
Sent from my HTC One using xda app-developers app

None really had a small black mark but managed to get rid of it quite easily

jonstatt said:
A tiny gripe for the perfectionists. But I noticed after a day, that I had a couple of tiny little nicks in the aluminium. As the phone had just been lying on my desk and hadn't been taken outside it must have come that way. I didn't see them at first because they are on the edges and not on the back surface. It is very tiny and it was because it caught the light that I noticed it. I remember when the iPhone 5 came out there were scores of people with chips on the black iPhones that showed silver underneath. This is nowhere near as bad as that....just the light catching the fact that the surface is not quite flat. I had the same with an iPhone 4 a few years ago as well. Seems to me that aluminium is very dingable, even in the factory.
Anyone else notice this?
Click to expand...
Click to collapse
What colour and is it possible that you post some pictures? I would like to follow this as would a lot of potential buyers Thanks, I have run out of thanks for the day
Please keep us posted about this

markj338 said:
What colour and is it possible that you post some pictures? I would like to follow this as would a lot of potential buyers Thanks, I have run out of thanks for the day
Please keep us posted about this
Click to expand...
Click to collapse
I tried to take a photo of it, but I am going to need someone at home to help me take the picture as its all about getting the light angled correctly so that its clear in the picture. So I will need someone to hold the phone at the right angle so I can get a picture to show. I will try and see if I can get a picture shortly. It is a silver phone, the only colour available right now.

It's not possible to make it 'perfect' so there will be slight defects.
Mine has a tiny little mark on the top that unless you really look for it in certain light its not possible to really see.

Unless there's a real dent or chip on the casing, it shouldn't be a problem. I know it can annoy perfectionists but man, that is aluminium, it is understandable (to an extent, of course)

yep, my silver came with tiny nicks..could feel them when i ran my fingers down the side.not there now [3 days later], maybe 'ironed' out lol

lezduur said:
yep, my silver came with tiny nicks..could feel them when i ran my fingers down the side.not there now [3 days later], maybe 'ironed' out lol
Click to expand...
Click to collapse
Haha...I hope the metal is not SO soft such that it would be possible!
I have wondered if a fingernail is able to nick the edges of the metal. The anodising is only on the back surface. So the bevelled edges will be more suceptible. It is the edge where I noticed a couple of tiny nicks.
I was reading that a fingernal has a hardness of 2.5 (on some scale that I forget the name of). And aluminium is 2.5-3. This would suggest a fingernail striking the edge of the phone could put a nick it. But I am not willing to try intentionally to do so!

jonstatt said:
Haha...I hope the metal is not SO soft such that it would be possible!
I have wondered if a fingernail is able to nick the edges of the metal. The anodising is only on the back surface. So the bevelled edges will be more suceptible. It is the edge where I noticed a couple of tiny nicks.
I was reading that a fingernal has a hardness of 2.5 (on some scale that I forget the name of). And aluminium is 2.5-3. This would suggest a fingernail striking the edge of the phone could put a nick it. But I am not willing to try intentionally to do so!
Click to expand...
Click to collapse
Mohs scale! Yeah, they do overlap on the hardness scale, and nails have a history of being able to scratch aluminum (take Macbooks, for instance).

Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.

jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
Click to expand...
Click to collapse
Note to self: Don't be lazy about cutting your nails once you get this phone.
Good call! :good:

jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the
Click to expand...
Click to collapse
My wife has damaged three buttons on 2 DAB radios and one remote control by that method.
Not even necessary to use a fingernail to operate the buttons, either.

jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
Click to expand...
Click to collapse
Rule number 1: never let your wife come anywhere near your phone :silly:

compact_bijou said:
My wife has damaged three buttons on 2 DAB radios and one remote control by that method.
Not even necessary to use a fingernail to operate the buttons, either.
Click to expand...
Click to collapse
Have you ever tried growing your nails out super long? The pads of your fingers begin to cease to exist. :laugh:

This is weird. And yes aluminum does indeed has a weak mohs scale and that's the main reason why they anodize it. Now when anodized the mohs scale increases to 9 so how would a fingernail even scratch that?

i can assure you that it does scratch with false fingernails regardless of any specifications.

Riyal said:
This is weird. And yes aluminum does indeed has a weak mohs scale and that's the main reason why they anodize it. Now when anodized the mohs scale increases to 9 so how would a fingernail even scratch that?
Click to expand...
Click to collapse
I dont believe all of the aluminium is anodised though. The back surface certainly is. But there is a bevelled edge which is almost shiny like a mirror, and I think that area is not treated and is also where I found a couple of tiny nicks (seen when angled under a spotlight) out of the box. It is unfortunately also the most likely bit to be hit knocked, swiped with a fingernail etc.

jonstatt said:
I dont believe all of the aluminium is anodised though. The back surface certainly is. But there is a bevelled edge which is almost shiny like a mirror, and I think that area is not treated and is also where I found a couple of tiny nicks (seen when angled under a spotlight) out of the box. It is unfortunately also the most likely bit to be hit knocked, swiped with a fingernail etc.
Click to expand...
Click to collapse
Could you post a picture of that bevelled edge? I'm not sure what you're saying but HTC One is unibody. And when you anodize aluminum you submerge the whole body into a solution. So it's quite impossible that some parts get's anodized and some aren't.

I guess I have to cut all my nails b4 buying it lmao
Sent from my GT-I9300 using Tapatalk 2

Custom Chrome Cast lol

I ordered a vinyl sample for my car and I guess I got the crazy idea of using it on my Chromecast and this is how it came out..
check out the video to see how it came out! (youtube) watch?v=tEIbwPRZ-Qk
Put the link together I guess i havent posted more than 10 times so i cant post the full url

I'd be concerned about how much this insulates the unit, and how long it will stick, it gets pretty hot.

mdamaged said:
I'd be concerned about how much this insulates the unit, and how long it will stick, it gets pretty hot.
Click to expand...
Click to collapse
I dont know yet I just stuck it a while ago. I'll report back in a few days to see if it stays on... I actally never thought of that..

Hehe, looks cool. I wouldn't be too worried about the side edges where you have the vinyl in the picture at least as that part is plastic anyway. The "faces" of the case, are sometimes else and designed to radiate heat, so I'd be careful covering them.

I'm afraid you might live to regret that decision! LOL
As soon as that unit cooks and the glue starts melting the covering will eventually come off and all you will be left with is a sticky tacky CCast! LOL

bhiga said:
Hehe, looks cool. I wouldn't be too worried about the side edges where you have the vinyl in the picture at least as that part is plastic anyway. The "faces" of the case, are sometimes else and designed to radiate heat, so I'd be careful covering them.
Click to expand...
Click to collapse
Its actually holding on pretty good I've used it for quite a while