Related
Mi3 Stuck on MIUI logo - can't backup data with adb pull
Hi
I've tryed to install Lollipop trough TWRP on my Mi3 without erasing the usera data (I know... it's not something that I usually do)
because I wanted to keep the data inside the internal sdcard
After that, the phone got stuck in the "MIUI bubble" screen, without wanting to boot the launcher etc
so I got back to mi recovery
I installed a custom mi3 Rom, but same problem
stuck at MIUI logo just before where the OS usually start working
now I'm on CWM recovery 6.0.5.0(R8) by furniel & donbot
trying to backup the internal sdcard trough adb
but something is not going right
adb pull /sdcard/0/ c:
start copying the files and the folders
but after a while, something with :nopm: shows, and "no such file or directory" text appear on the prompt window, and ADB stops copying the files
what can I do?
I just want to copy what's inside my phone, and the use the xiaomi pc tool (with phone in fast boot) to hopefully return to a working phone
why ADB stop copying files after a while?
any solution?
Hello,
Problem - Device keep on rebooting showing Mi logo (every 2 sec), Does not boot into system
What I did?
exteneded system partition to 1.2 gb - success
flash Marshmellow custom rom - success
misinstalled system ui of theme - system ui stopped
reinstalled clean rom from custom recovery - success
then it does not boot into system - keep on rebooting at mi logo (every 2 sec)
tried fastboot rom - failed (remote size too large)
rebooted into recovery
flash stock partition via adb - success
fastboot flash (with flash all) - success (says miflash - operation compeleted successfully)
Still it does boot into system - keep on rebooting at mi logo (every 2 sec)
Help?
if you can access recovery now then go to recovery and take a backup of current rom. The wipe everything except internal storage and then restore the backup.
maybe it'll fix it because thats what happened to me too after flashing the MM custom rom. Every time i was rebooting the phone kept bootlooping at Mi Logo.
Hmm i ll try but i have to install twrp from adb for backup.
Cwm backup not promising.
You think there ll be problem in hardwere?
No problem in hardware.
and yes do it twrp only. never try cwm.
the thing is i am not able to enter into recovery mode at all.
No recovery and fastboot accessible.
Then connect it to PC and tell me what name the device manager shows for the device.
fastboot is accessible.
i've flashed fastboot rom from miui. successfully completed. but it won't boot.
yesterday it booted into system so i was charging the phone, as soon as i removed charger it went the same boot looping.
now,
clicking flash_all_except_storage from fastboot command
it shows one line in every process - 'target reported max size 80909989 '
process goes on and success.
but does not boot into system. same bootloop.
one strange thing is,
when i connect to pc, - just by pressing vol down button i'm entering to fastboot. (even without holding power button)
does this mean there's something wrong with power button which causing cont. reboot? i mean it cont. forcing system to on and off? :s
Nothing is wrong with the hardware. In this situation the phone boots into fastboot by pressing vol when plugged in.
You didn't answer my question. What does it show in device manager on PC.
sorry for late reply , net connection loss
device manager
1st one is android booloader interface
other devices - bluetooth peripheral devices
Did you use miflash tool to flash fastboot rom
yes,
flashed successfully says miflash.
While flashing using miflash did you select all files in advanced menu properly.
Like all the bat, mbn and xml files.
i didnt try all the file separatly.
trying now.
Then go to advance and choose all the respective files properly.
1st one - flash_all_except_storage.xml
2nd one - nvflash_all.bat (leave it as it is)
3rd one - MPRG8974.mbn
4th one - 8974_msimage.mbn
5th one - rawprogram0.xml
6th one - patch0.xml
i found
flash_all.bat
could not find nvboot script
flash programmer
boot image
could not find kernelflinger image
could not find UFS provision image
RAW xml file
patch xml file
should i go with files?
Which MiFlash tool are you using.
I used the 2014.05.09.0 version
Try this one.
And extract the fastboot ROM twice till you get the images folder inside the "cancro_images_V7.0.****" folder. There you'll fill all the files.
Then in miflash click browse and select that images folder.
And in advanced options select the respective files which are there outside the images folder.
2015.10.28 version
i ll leave the navboot as it is.
giving it a try.
appreciate your help brother.
If it doesn't work then try my version.
It has proper names of files. To avoid confusion.
And all files are there in fastboot ROM except nvboot
i checked on miui
no halos.bin
tz.bin
these all files?
p.s.
operation completed successfully but same boot loop.
trying your version now.
I must note: I use linux. I only used Windows because SPFT Linux version gave me a chip mismatch error I couldn't fix easily.
1: Please read. It explains what problems might arise. Especially post #6 and #13.
2: There are 2 versions of the scatter file. The MT6735 version is what I used successfully. The MT6737Tmod version is what comes from post #6 & #13.
3: Please use each scatter file to Readback your boot and recovery partitions first, renaming as fit, so you can have a backup BEFORE ANYTHING. Then test unpacking them to see if everything went correctly. Then readback every partition in the scatter file so you don't have to depend on the stock ROM for a backup. I didn't and it led me to take this route.
3: Seem to be a difference in the naming of the scatter file and sizes of system, cache, and userdata inside from the stock ROM and what works..
4: DO NOT choose Format+Download until you know which scatter file works, unless you want to chance a Hard Brick.
5: Wiping the dalvik and cache in stock recovery before flashing TWRP seems to be the best thing to do to avoid boot loops or a hung boot.
THIS ROOT PROCESS WAS DONE OVER THREE DAYS OF CAR WORK, DRIVING, FAMILY, AND COMPUTER WORK. MOST OF THE TIME SPENT WAS THIS MORNING TRYING TO GO TO SLEEP. DIDN'T HAVE TIME TO DOCUMENT AND TAKE PICTURES. THIS WRITE-UP IS FROM WHAT I REMEMBER DURING THIS PROCESS. IF I CAN REMEMBER SOME VAGUE DETAIL THAT YOU NEED, GOOD. IF NOT, DON'T STRESS ME. THE HARD PART IS DONE. A GOOGLE SEARCH OF SOME OF THESE PROGRAMS WILL GET QUICKER RESULTS IF YOU DON'T HAVE THEM. THE MAIN THING NEEDED FROM MY RESEARCH WAS THE SCATTER FILE. LINKS FOR SCATTER FILE AND RECOVERY IMAGE ARE BELOW.
Looking for a way to root first day getting this phone in February. Read this post last Tuesday about MT67xx rooting, thanks lsemprini. Spent two days finding which versions of the programs work with this phone, already had the ROMs, drivers, and tools. Dove right in.
I downloaded the ROM from needrom. Scatter file was unusable. Wrong chip error. Phone reads MT6735 scatter file read MT6737. Did a manual diff. Used SP Flash Tool v5.1524 to flash, formatted instead of downloading by mistake, cord got pulled, Hard brick. Fought with Windows7 to get drivers to recognize a hard brick. Still don't know how I did it but it read then flashed. Looked like another hard brick but SPFT would recognize it for the Memory Test. I just held power+vol_down with just charging block power to get it to come on. Sometimes just one of the buttons was enough to get it to power on and start a bootloop. Took two minutes sometimes. Flashing the wrong recovery led to bootloops. Starting SP Flash Tool and plugging in the USB to the phone as soon as it powers off during a loop will let the preloader "register" and the images to be flashed. Flashing from a stock ROM will lead to IMEI being erased. Used SN Write Tool v1.1716 to write the IMEI numbers. Got them from the side of the box. The MD1_DB and AP_DB files needed are in the stock rom.
Ported TWRP, credit to jemmini for the post https://forum.xda-developers.com/vivo-xl/development/recovery-t3311601. Used that recovery as a base. Ported according to the myriad of guides that I have been reading over the past few days. None of them worked as instructed, had to modify trial and error style. Finally got TWRP to read the internal partitions AND remain after a reboot. A lot was going on when I did this. Not sure if I formatted before, I remember flashing a lot of because of something. I mounted the system just in case & flashed SuperSu from chainfire's website, no formatting afterwards. Rebooted and installed SuperUser and BusyBox. I tried adb and fastboot. They work but not for everything. Hooked phone up to computer with debugging enabled.
Code:
adb root
gives a shell, no errors unlike before. Edit: ADB won't let me start as root anymore.
Needed files
Blu Vivo XL2 TWRP 3 Recovery
MT6735 Scatter File
MT6737T Scatter File
BLU Vivo XL2 V0070UU Stock ROM if you don't have a backup of your partition images.
Step 1
Install Minimal ADB and Fastboot and USB VCOM drivers.
Download SP Flash Tool, SN Write Tool, scatter file, and twrp3.0 to a working folder.
Download SuperSu zip & SuperUser apk then put them on your SD Card.
Install SD card into phone.
Step 1.A For Full ROM Flash and IMEI Write
Download Stock ROM and extract to working folder.
Move twrp3.0 to ROM folder.
Step 2
Install SP Flash Tool and SN Write Tool and run.
Step 3 To flash TWRP only
Reboot phone to recovery then wipe cache and dalvik. Can't remember if it is a dalvik option in the stock recovery now.
Power off phone. Make sure it is not plugged up to the computer.
IN SP Flash Tool:
Load scatter file that works from working folder.
Make sure download only is selected in drop down menu.
Check only the recovery partition box and click the name of the recovery file on the same line.
Browse to TWRP recovery image and select.
Click the Download button with the green arrow.
Plug phone into computer and wait until window with OK pops up. Success.
Step 3.B OPTIONAL
Select format and flash all using stock ROM or images backed up from your phone.
Stock ROM must be extracted and custom recover put into same folder and renamed to "recovery.img" to make
everything automatically load.
Click the Download button with the green arrow.
Plug phone into computer and wait until window with OK pops up. Success
Step 4 Only needed when formating+downloading ROM
With phone still powered off and unplugged, write IMEI numbers using SN Write Tool.
Step 4.A
Click System Config.
Select IMEI in Write Option Area.
Make sure IMEI Checksum and Dual IMEI are checked.
Load MD1_DB and AP_DB files from ROM folder.
Click Load Modem DB from DUT box.
Click Save.
Step 4.B
Click Start.
Input your IMEI numbers from box.
Click OK. Success
Step 5
Boot to recovery.
Swipe to make permanent.
Wipe dalvik and cache.
Flash SuperSu..
Reboot.
Install SuperUser apk and BusyBox of your choice.
Step 5.A
If SuperUser apk or any app that ask for root permission cannot get it, reboot to recovery.
Mount system partition: Shouldn't matter but it worked for me.
Flash SuperSu zip again.
Reboot.
Install SuperUser apk and BusyBox of your choice.
ENJOY
When i connect the device after clicking download, it says "CHIP TYPE NOT match!"
mind you the device is off, i tried to troubleshoot but still getting the same error.
any help would be appreciated
UPDATE: Im thinking it has to be the scatter file, but im not sure.
UPDATE: I got it to work, after flashing superSU, my phone wont boot past the initial white Blu start screen.
[QUOTEUPDATE: I got it to work, after flashing superSU, my phone wont boot past the initial white Blu start screen.[/QUOTE]
Try powering it off, booting to recovery and then wiping dalvik and cache.
The longest it took to get past that logo was 15 minutes. It is either encrypting or decrypting. Didn't get any type of messages until after root, and those were optimizing messages. Only one came through before rooting when I interrupted the boot process and that was about encrypting the phone. Phone was encrypted before root, now it is decrypted. Could have something to do with that. Try wiping the cache and dalvik after flashing. I actually flashed it three times in a row. The third was after mounting storage then flashing the SuperSu zip. Once you see the next logo with the colorful circles and hear the sound it might be another wait. That is where it let me know it was optimizing.
I must note: Please use scatter file to Readback your partitions so you can have a backup BEFORE ANYTHING. I didn't and it led me to take this route.
=smith901;72841007][QUOTEUPDATE: I got it to work, after flashing superSU, my phone wont boot past the initial white Blu start screen.
Click to expand...
Click to collapse
Try powering it off, booting to recovery and then wiping dalvik and cache.
The longest it took to get past that logo was 15 minutes. It is either encrypting or decrypting. Didn't get any type of messages until after root, and those were optimizing messages. Only one came through before rooting when I interrupted the boot process and that was about encrypting the phone. Phone was encrypted before root, now it is decrypted. Could have something to do with that. Try wiping the cache and dalvik after flashing. I actually flashed it three times in a row. The third was after mounting storage then flashing the SuperSu zip. Once you see the next logo with the colorful circles and hear the sound it might be another wait. That is where it let me know it was optimizing.
I must note: Please use scatter file to Readback your partitions so you can have a backup BEFORE ANYTHING. I didn't and it led me to take this route.[/QUOTE]
chip type not match. pls help
---------- Post added at 10:46 AM ---------- Previous post was at 10:41 AM ----------
ANJIII said:
chip type not match. pls help
Click to expand...
Click to collapse
what version of stock rom did you use? there are 3 versions in needrom; v7, v11, and v12. i use v11 cause of automatic update
ANJIII said:
chip type not match. pls help
---------- Post added at 10:46 AM ---------- Previous post was at 10:41 AM ----------
what version of stock rom did you use? there are 3 versions in needrom; v7, v11, and v12. i use v11 cause of automatic update
Click to expand...
Click to collapse
i solved my own problem hahaha. just rename the file to mt6737t instead of mt6735. also edit the platform in scatter file. change it to mt6737t too then install your supersu with the use of twrp then wipe dalvic then its done
ANJIII said:
i solved my own problem hahaha. just rename the file to mt6737t instead of mt6735. also edit the platform in scatter file. change it to mt6737t too then install your supersu with the use of twrp then wipe dalvic then its done
Click to expand...
Click to collapse
Good. I had to name it that because of the chip mismatch error. It was from the V7 ROM. The other two are updates. I also messed up big time along the way. My phone always read MT6735 but it does have MT6737T in different files. I always wondered about that. I got it to work without buying another phone.
It seem that the phone boot logo never goes away. What should I do now?
Alexis96312 said:
It seem that the phone boot logo never goes away. What should I do now?
Click to expand...
Click to collapse
Hope you Readback your original recovery and other partitions. I didn't and worked hard to get it back. When I just flashed the recovery and something went wrong, it reverted back to the stock recovery.
Try doing this:
1. Start SPFT with the reçovery you want to flash.
2. Hold down the power button. AS SOON AS IT VIBRATES, PLUG THE USB CORD IN.
3. Hopefully you timed it right and it will flash and boot.
Sometimes it took 15 minutes to get past the boot logo.
Here what I did so far
1. Format using SP Flash Tool
2. Download /// By Using Scatter-Loading Files (MT6737T_Android_scatter.txt {From Rom}) Which it check all the boxes AUTO ///// It works but I didn't change the recovery.img like TWRP.img
Download it
It works normal.
___________________________________
But I want TRWP.img to be my recovery for root (SuperSU)
I try SP Flash Tool to change the recovery img to TRWP.img /// Using Scatter-Loading Files (MT6737T_Android_scatter.txt {From Rom}) I UNCHECK ALL BUT RECOVERY.IMG
Before this happen I didn't factory reset or Format anything yet.
It work to Recovery.img but THE BLU LOGO IS STILL LONG
I feel like it not working
Help Help Help ME
Please
Alexis96312 said:
Here what I did so far
1. Format using SP Flash Tool
2. Download /// By Using Scatter-Loading Files (MT6737T_Android_scatter.txt {From Rom}) Which it check all the boxes AUTO ///// It works but I didn't change the recovery.img like TWRP.img
Download it
It works normal.
___________________________________
But I want TRWP.img to be my recovery for root (SuperSU)
I try SP Flash Tool to change the recovery img to TRWP.img /// Using Scatter-Loading Files (MT6737T_Android_scatter.txt {From Rom}) I UNCHECK ALL BUT RECOVERY.IMG
Before this happen I didn't factory reset or Format anything yet.
It work to Recovery.img but THE BLU LOGO IS STILL LONG
I feel like it not working
Help Help Help ME
Please
Click to expand...
Click to collapse
Try flashing stock ROM, wipe data in stock recovery, then flashing TWRP, wipe dalvik.
If that don't work, wipe data then flash stock ROM with TWRP recovery, wipe dalvik.
The scatter file from the stock ROM gave me problems. Had to modify mine.
Don't forget to restore your IMEI afterwards since you formatted+flashed.
I will try
---------- Post added at 08:33 PM ---------- Previous post was at 08:23 PM ----------
I did try it but it seem not to do anything
Can you be so kind to upload the mod Scatter File Please
Alexis96312 said:
I will try
---------- Post added at 08:33 PM ---------- Previous post was at 08:23 PM ----------
I did try it but it seem not to do anything
Can you be so kind to upload the mod Scatter File Please
Click to expand...
Click to collapse
The one I attatched on the first post #1 is my modified scatter file. The mods included changing the size to the system, cache, and userdata. Just compared all three. The stock MT6737T scatter file and the V12 ota scatter are the same. The one I changed, MT6735, have the file name, platform name, and partition changes. I don't know why I had to modify it., especially the size parts. It all worked when I did that. I basically gave up on it because of a hard brick. Then I remembered reading MT6735 in some file a few months back while roaming the file system. Made the changes and was back in business. Maybe you need the stock scatter file, here it is.
It's what the end result of this post @ANJIII did minus the size changes..
He just did the name changes and it worked for him. Ya'll seem 180° from where I was.
The second one is from the V12 OTA update. It is very minimal, must be all that is needed for a scatter file. Not really sure tho. Hope it is just scatter file issues.
As long as SPFT is reading your phone, it's still a chance on it all working out. That is how I viewed it.
@andromedaXVIII Don't know if you got it working. This might be a potential solution.
Unable to find partition for path '/sdcard'
Unable to find partition for path '/sdcard'
Unable to find partition for path '/sdcard'
Updating partition details...
Failed to mount '/protect_f'(Invalid argument)
Failed to mount '/protect_s'(Invalid argument)
Failed to mount '/nvdata' (Invalid argument)
...done
Full SELinux support is persent,
MTP Enable
Wiping Dalvik Cache Directories...
--Dalvik Cache Directories Wipe Complete!
Formatting Cache using make_ext4fs..
Updating partition details...
Failed to mount '/protect_f'(Invalid argument)
Failed to mount '/protect_s'(Invalid argument)
Failed to mount '/nvdata' (Invalid argument)
..done
Is this good or bad? This is in Twrp recovery
Alexis96312 said:
Unable to find partition for path '/sdcard'
Is this good or bad? This is in Twrp recovery
Click to expand...
Click to collapse
I take it TWRP flashed successfully, it is having a problem reading those four partitons. Possibly encryption is stopping you. Try flashing this in TWRP before anything else to remove the encryption.
I didn't get any errors. I know the userdata partition was different in the scatter files. That could be the reason for /sdcard not being recognized. Must be a difference in the layout of phones, not really sure. My protect_s, protect_f, and nvdata partitions and /sdcard all mount fine, pictures attached. I am able to do a backup in TWRP. I have been playing around with porting different ROMs and came across an issue similar to this. Had to change some lines in updater-script.
I checked fstab.mt6735 file in the stock recovery, the modded twrp3 recovery, and stock boot recovery to make sure I didn't make any typos or leave anything out. They all have the same lines. Had to do this:
Code:
("ext4", "EMMC", "/dev/block/mmcblk0p5", "/system")
in the updater-script I was working on. I got ahead of myself flashing a ROM and was stuck on the 1st logo screen. Held power+vol_down to get it unstuck. Yes I was all calling myself kind of names like I'm sure some people have done following this guide.
Which scatter file you used? Did you do a readback in SPFT with the WORKING scatter file and mount one of those images to check if you can read and write the files. I mounted system.img from the stock ROM to make sure I could read and write the files before I started with flashing. I'm thinking there is are internal differences in the XL2s. You might have to reflash using the stock ROM with TWRP as the recovery with the Format+Download option since you got TWRP installed.
Once I get through playing around with trying to flash this ROM, I will restore and try to find all the partition mappings and update TWRP to work with the format from the updater-script and see if that work. Will let you know what happened.
Alexis96312 said:
Unable to find partition for path '/sdcard'
Unable to find partition for path '/sdcard'
Unable to find partition for path '/sdcard'
Updating partition details...
Failed to mount '/protect_f'(Invalid argument)
Failed to mount '/protect_s'(Invalid argument)
Failed to mount '/nvdata' (Invalid argument)
...done
Full SELinux support is persent,
MTP Enable
Wiping Dalvik Cache Directories...
--Dalvik Cache Directories Wipe Complete!
Formatting Cache using make_ext4fs..
Updating partition details...
Failed to mount '/protect_f'(Invalid argument)
Failed to mount '/protect_s'(Invalid argument)
Failed to mount '/nvdata' (Invalid argument)
..done
Is this good or bad? This is in Twrp recovery
Click to expand...
Click to collapse
can you send us your vivo xl2 specs because there are two versions of xl2, V0070UU and V0070EE. Mine is V0070UU. I just did some renaming and editing in the scatter file of MT6735 and it bootloop once after I installed the twrp. I restarted my phone during the bootloop by holding the power button. After that, I opened the twrp to install the supersu then wipe dalvic cache. You may now boot up the phone and it took 10-15mins to use it because the system shows that it optimizes 205 apps(in my case, maybe because I have installed numerous apps). After that my phone is usefull again and I installed V4A because that's the only reason why I wanted to root this phone.
Here is all the information I have pulled so far from the phone. Have a screenshot attached from About device in settings. The attached zip file is all the information I could think to pull using adb . The attached file is my partitionlayout. I just ran cat against every file to see what it would give me and redirected the output. Using adb while the phone is in recovery let me pull and read the files I couldn't while the phone was booted.
@Alexis96312, try to run this command in terminal to get your partition map:
Code:
adb shell "su -c 'ls -l /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/'" > someFileName.txt
I have mine listed in the zip file as partitionLayout.txt It will list which names go to what device in /dev and save it in your current directory. The file can be used to get the correct partition layout on your phone. Post the results and I will repack the recovery to see if it will work for you. You can do it also with Carliv Image Kitchen, it has a menu :good:. You will have to modify the fstab files in the ramdisk folder of the extracted image to what the partition map specifies. I went thru all of them to be sure when I first ported TWRP.
@ANJIII is correct about the different versions, nice catch. I forgot about that. I assumed you had the V0070UU version like mine, fault on me for not asking. Mine specifically says BLU_V0070UU_V07_GENERIC 25-11-2016 09:46. I'm thinking the GENERIC part comes from me having to flash the stock ROM. I think it had BLU_V0070UU_V07 with user/keys before I bricked it and had to flash the stock ROM. Got three extra apps that I instantly removed. Seems like the stock ROM function the same as before bricking flashing stock.
ScreenShot
ANJIII said:
can you send us your vivo xl2 specs because there are two versions of xl2, V0070UU and V0070EE. Mine is V0070UU. I just did some renaming and editing in the scatter file of MT6735 and it bootloop once after I installed the twrp. I restarted my phone during the bootloop by holding the power button. After that, I opened the twrp to install the supersu then wipe dalvic cache. You may now boot up the phone and it took 10-15mins to use it because the system shows that it optimizes 205 apps(in my case, maybe because I have installed numerous apps). After that my phone is usefull again and I installed V4A because that's the only reason why I wanted to root this phone.
Click to expand...
Click to collapse
Answer in pictures
ADB USB
It seem that the computer can't find it what now
Do I need to install the ADB driver again?
I'm trying to do it on stock recovery
Do I have to do it on TWRP recovery?
Alexis96312 said:
It seem that the computer can't find it what now
Do I need to install the ADB driver again
Click to expand...
Click to collapse
It look like the pid:vid aren't recognized correctly. Usually a reboot will help.
Are you connect using adb while in recovery? If so, see if Windows will install new drivers for you. My Linux box read mine as a Samsung at one point. Try running the ls part of the command in TWRP terminal.
This is where I fought with windows when the cord got pulled during flashing. I never got an error like the 2 at the top, always like the bottom one. I kept adding legacy hardware in device manager until one of them worked. The Linux version of SPFT always give a chip mismatch error. Wish it worked so I won't have to boot to Windows.
I kept doing format+download and and plugging the phone in until Windows recognized it because it was in a bootloop when that happened. You need the preloader to be recognized.
Both stock ROMs are on needrom.com. I downloaded the UU version, the EE version is what you might need. I'll pm you a link to my backups from TWRP to see if they will work for you. Same thing happened to me playing with the new ROM. Restoring my boot and system got it back working.
Help revive my device.
After updating the tablet from the playmarket of the Youtube application, the tablet freezes, after a reboot, it hangs on the Asus logo and a spinning circle. I couldn’t enter the droidboot from the buttons and, following the instructions from the 4pda forum, after downloading the service firmware, unpacked it to drive C into the folder, then went to the firmware folder by pressing shift + the right mouse button opened the command window and launched the
droidboot with the fastboot boot droidboot.img
fastboot continue
commands booted into the droidboot and in the folder with the firmware clicked on the update_image file, the firmware process started which took a very long time about 7 hours, at the end the tablet rebooted but only until the first screen saver. I waited a long time, but it did not boot. I turned it off. After that, by pressing a combination of buttons, I was able to enter the droidboot, the serial number of the tablet was missing, through a dead robot I was able to enter the recovery.
Then, according to another instruction from 4pda, through a temporary twrp, I tried to install the Ul-KO13-WW-3.2.23.182-user firmware, the installation process started, but it did not install, but the serial number returned and the tablet again hung on the Asus logo and a spinning circle.
I checked the
fastboot oem start_partitioning
fastboot flash /tmp/patrition.tbl partition.tbl
fastboot oem partition /tmp/partition.tbl
commands after each command was OK. So the flash memory of the tablet is working.
After I checked the root, the rights remained. USB debugging in the developer menu was turned on even when the tablet was working. Then I decided to try installing the service firmware 201 again, as I wrote above, and again unsuccessfully, the serial number flashed again. . And again, through a temporary twrp, I began to install 182 firmware.
And the serial number failed, it was not restored, but the recovery now showed that it costs 182 firmware. After that, when checking, I found out that no root su. I got a complete crash. I tried again to install 201 firmware and now it costs WW 3.2.23.201 in recovery.
On the advice of a person from the 4pda forum, I tried to restore images of 201 firmware boot.img fastboot.img recovery.img via twrp v2.8.7.0 from the 4pda forum, but again unsuccessfully. I showed the person who helped me install the firmware images 201 that twrp gave me an installation error, it read:
Updating partition details ...
E: Unable to mount '/ factory'
E: Unable to mount '/ config'
E: Unable to mount '/ data'.
The person who helped me said that there was no markup table, or rather, the system section was written, but could not find the other sections, since he wrote this script for Android 5. And on KitKat version 4.4, he did not test this script. Now I'm desperate, I really need a tablet in working condition. Because I am very poor, and I do not have money to buy another tablet, I have been sick for 5 years. I live on disability benefits, they pay me $ 50 a month and I can’t buy another one. I beg everyone to help with tips and instructions on how to restore tablet firmware. I need a worker. I need your help.
Even when connecting to a laptop on a Windows 7 tablet in twrp 2.8.7.0 mode, the tablet is detected as K013, but it does not see the internal drive and only shows a microSD card, I suggest that this is because the firmware is installed incorrectly and there are no firmware sections? ? If Who knows, you can install any custom firmware that fits on my tablet.
If someone can write me instructions for restoring the firmware. If anyone has encountered a similar problem, give information and instructions for restoring partitions with links from where to download what and step-by-step instructions for restoring.
Sorry text wrote through translator. I hope the problem is described clearly and someone can help me with the firmware.
I thank everyone in advance who will respond and help restore the firmware.
P.S. I decided to try to flash through Intel Flash Tool Lite, I launched service 201 firmware, reached the 57% band and issued FAILED. I turned off the tablet, I decided to try running TWRP, running the script, and now there are only two errors:
E: Unabled to mount / and
E: Unabled to mount / config, and the amount of internal memory Internal Storage (3916MB) !!! And before that, it was zero and in the device k013 on the laptop it shows the storage along with the memory card. Here's an interesting process
miflash error: not catch checkpoint (\$fastboot -s .*lock), flash not done -> HELP?!
Hello,
I unlocked my Mi8 and successfully installed Lineage on it.
After trying to install Magisk, my phone only boots into fastboot (and mi recovery, but that's not very helpful).
fastboot boot twrp.img results in error :
FAILED (remote: Failed to load/authenticate boot image: 00000050)
I tried MIFLASH by
1) downloading, dezipping and starting newest miflash (2020.3.14.0)
2) installing drivers
3) downloading and dezipping MIUI-fastboot-ROM
4) entering path* into miflash, refresh and flash (already tried all options "clean all" to "clean all and lock")
*) path to the folder that includes among others flash_all.bat
all this results in error:
not catch checkpoint (\$fastboot -s .*lock), flash not done
Nothing changed with the phone, still the same error.
While wanting to review the logs, I clicked in miflash on log/flash log. The log did not say anything helpful, but the error code of fastboot boot twrp.img changed to command write failed (Unknown error). Nothing else changed.
UPDATE: changed back to previous error (remote: Failed to load/authenticate boot image: 00000050)
If you have any idea or need any more information, please tell me!
I need that phone and cannot afford to terminally brink it!!
I did not find much online, did no one else had this problem??
THANK YOU!
PS: Using lenovo-laptop with quite vanilla win10 (and not so vanilla kubuntu dualboot, but miflash only supports windows)
MIFLASH-log says:
Code:
[14:37:14]:lsusb path:"C:\Users\<>\Downloads\MiFlash20200314\MiFlash20200314\Source\ThirdParty\Qualcomm\fh_loader\lsusb.exe"
[14:37:14]:Specified cast is not valid.: at XiaoMiFlash.code.Utility.TreeViewUsbItem.AddPortNode(String HubPath, Int32 NumberOfPorts)
[14:37:14]:Specified cast is not valid.: at XiaoMiFlash.code.Utility.TreeViewUsbItem.AddPortNode(String HubPath, Int32 NumberOfPorts)
[14:37:14]:Specified cast is not valid.: at XiaoMiFlash.code.Utility.TreeViewUsbItem.AddPortNode(String HubPath, Int32 NumberOfPorts)
[14:37:14]:GetScriptDevices
[14:37:15]:FlashingDevice.flashDeviceList.Remove ab6ee6a0
[14:37:15]:add device ab6ee6a0 index 1
[14:37:15]:Thread start,thread id 5,thread name ab6ee6a0
[14:37:15]:start process id 2524 name cmd
[14:37:15]:Thread stopped, thread id 5, thread name ab6ee6a0
UPDATE:
what would the world be without mysteries. Though I cannot really accept them in the IT sector, I cannot really explain, why "everything" works now.
The error of miflash still exists, but fastboot works.
I tried booting and flashing the lineage boot.img instead of twrp.img as well as miflash about every five minutes. I do not think it was the latter, though.
I am still curious on that matter, but having everything working is more important.
Thank you anyway.
Never encountered that error however, if you have Lineage installed i have to wonder how or why your phone is able to boot into mi recovery ? You should have a custom recovery installed (twrp, orangefox .. something)
If you have a ryzen laptop - see the thread about ryzen cpu - they have some issues with recognising properly devices via usb - solved by using a hub.
There is no need to use miflash to flash the fastboot miui rom - you can do it from command line in both windows and linux. Once you decompress the fastboot tar.gz, you have .bat and .sh files in the folder - miflash runs those exact files. Just install adb and fastboot on kubuntu and run your choice of script (flash_all, flash_all_lock, etc.) this has the added benefit of not needing odd drivers in windows (last time i used miflash it complained about some .net stuff that i had to manually install).
Since normally you would install twrp i have to wonder if by any chance mi-recovery is not checking the boot image before flashing it ... not sure, or maybe it had something to do with the FBE of lineage since there was no recovery in place to decrypt the partitions, if i remember correctly, the boot image needs to be signed with the verity key. The log snippet you provided doesn't tell anything as it has no error messages or anything.
Either way, not sure how what you brutforced to get it working but glad it solved itself, however, if you still have mi-recovery instead of a custom one, i would suggest you backup the device, flash MIUI without locking the bootloader, installing twrp (not just booting it) and reinstalling lineage from there. (all this can be done from your kubuntu install so you avoid driver and other windows shenanigans)
to install adb and fastboot it's just a question of sudo apt install adb fastboot
either tar -xvzf the archive of the fastboot image or just extract it from the file manager
open a terminal in the extracted folder (where the bat and sh files are)
put the phone in fastboot mode, connect via usb and do a "fastboot devices" just to make sure the device shows up
./flash_all.sh (this does the exact same thing as the clean option in miflash - just open the script and take a look through it)
Once the flash is done and the phone reboots, skip through all the setup steps just so miui loads up then reboot to fastboot
get twrp from their website, open terminal where it is downloaded and "fastboot flash recovery <name_of_file>.img"
once the command finishes do a "fastboot boot <name_of_file>.img" and once you are in twrp, go yo wipe, do a factory reset, back, advanced wipe and select the caches, back, format data, type yes, back to the main menu of twrp and reboot recovery, this should boot you back into twrp but this time the one that is flashed on the device.
from here on install rom of choice and magisk as usual (use the install option in twrp tho, don't unpack the zip)
Had the phone for 2 years and i flashed different roms on it almost weekly since the wait time to unlock the bootloader expired and never had an issue with this workflow and it saves you from having to use windows. Even for unlocking the bootloader, in case you ever lock it back up, you can use https://xiaomitool.com/V2/download (worked like a charm on linux)
sorfat said:
Never encountered that error however, if you have Lineage installed i have to wonder how or why your phone is able to boot into mi recovery ? You should have a custom recovery installed (twrp, orangefox .. something)
If you have a ryzen laptop - see the thread about ryzen cpu - they have some issues with recognising properly devices via usb - solved by using a hub....
Click to expand...
Click to collapse
Thank you for your detailed reply!
Of cause, in order to install lineage, I used TWRP. But I somehow did not install it, but used fastboot boot twrp.img in order to manually temporary boot twrp every time I need it. It was not intentionally at first (did do
"fastboot flash recovery <name_of_file>.img"
Click to expand...
Click to collapse
) but I learned to like the mi recovery for it's wiping and being able to use with the keys (not touch, since I managed to disable touch once before that). Mi recovery does not allow flashing at all, so no worries there^^
I have read the ryzen thread before posting, that's why I included my hardware. Not sure, if Lenovo has ryzen, mine does not.
Why I did not think of just running the script in kubuntu instead of hassling with windows, I do not know. Guess it does have something to do with the wood in front of all the trees.
I have the phone for about one and a half week and flashed it at least once a day :laugh:
But I hope to neither lock it again (twice is sweaty enough) nor have to flash it every week.
Thank you very much, if I ever lock myself out again or get another phone to set up, I will defintely reread this post!
btw: is there no way in xda to close a thread?