Database Develop

no fastbooing/flashtools/recory-ing , help please !

Hi friends , i really need some help here
my device have no system/kernel now .. i've been trying to flash a kernel via fastboot but it always tells ( failed - remote : command not allowed )
as for flashtool .. whenever i try to boot into download mode the led turns red then green in a second then disconnects it self by only booting to sony logo .. even tried to charge thinking it's only a charging problem .. but it won't even show the charging animation , do you know how to fastboot flash kernel successfully , ps : am not a noob , just haven't done this for a long time studying high-school .. means you can ask me anything about the process . am on LB BTW
really need your much awaited halp !
and what is it required to fastboot or flashtool ? could be a wrong drivers issue ? , i alredy tried two drivers !
more about the problem .. i was flashing eXistenz 5 black and its superuser fix , which was done successfully then i had to flash a kernel via flashtool which didn't go well , i thought it's because i forgot to check usb-debbuging of dev-option so i had ( deleted data / cache to flash a new rom , tells the cwm recovery ) to flash the eXistenz 4 back , which had formated the whole system/data/cache and everything .. and ever since it won't fastboot or flashtools or even recover into recovery as the kernel should be deleted ! i think the device is gone heart-attack as dead !
Edit : flashtool needs usb-debbuging on which in my case is not
am left with fastboot to flash a kernel and have a recovery , would someone please at least try to help ! ?

Bricked Mi3 - Showing QHUSUB Bulk in PC

I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.

Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.

I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no

partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone

murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm

I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g

@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol

you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt

If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .

and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))

Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!

From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?

Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!

coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?

回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4

coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then

Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking

coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?

Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583

Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..

[solved]after root the phone is bricked

dear friends I am happy to be in this wonderful forum ,,,
i try to root the M android but i get the phone in boot loop , i can asses twrp and fastboot , i try to flash system.img from fastboot but i get always cannot load system.img i try to use official recovery via volume and power button but also i get error massage , why fastboot flash is not working ??? any solution ???
i have found solution

please share your solution. thanks.

found a solution-share it....
tania.k said:
dear friends I am happy to be in this wonderful forum ,,,
i try to root the M android but i get the phone in boot loop , i can asses twrp and fastboot , i try to flash system.img from fastboot but i get always cannot load system.img i try to use official recovery via volume and power button but also i get error massage , why fastboot flash is not working ??? any solution ???
i have found solution :--- but hey... why wont you share it ?
Click to expand...
Click to collapse

Soft Bricked Redmi 4X Global, Can't find solution, please help me :(

Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits

try booting recovery from fastboot "fastboot boot *twrp image*.img"

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.

Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it

Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped

Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.

Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse

chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz​With miflash-20220218 in edl mode .

[URGENT HELP] Pure stock Redmi 4A bricked (No Usb debugging or anything enabled)

Hey Guys,
One of my younger brother some how managed to brick a stock 4A, and when starting it up, its stuck at the MI logo, however I am able to go in the Fastboot and stock recovery via the side volume and power buttons and the phone is charging while powered off.
I have tried factory resting via the stock recovery, but no use, still stuck at the logo.
Is there any app or software like odin (for Samsung), where I can flash a stock Rom in fastboot via my pc? If so can you please share the link to the thread or step by step instructions to do so?
i want to share again, its stock with no Xiaomi account or any USB debugging enabled from the developer options as it is pure stock. I have also attached the pictures of the phone with this message (I know it won't help, but just in case).
I want to thank every one for giving me their time in assisting me in resolving this issue.
Have a great day.

This guide might help you
http://www.99mediasector.com/flash-xiaomi-device-without-unlock-bootloader/
For procedure you can refer
Sorry not able to help u fully because of my time issues
According to me u can still flash miui ROM via fast boot (even when locked)
Use mi flash tool for that (link
https://xiaomiflashtool.com/ )
U need to only use fast boot roms to flash
Link http://en.miui.com/a-234.html <---- select redmi 4a global rom from it
See the YouTube vid for process

rseragon said:
This guide might help you
http://www.99mediasector.com/flash-xiaomi-device-without-unlock-bootloader/
For procedure you can refer
Sorry not able to help u fully because of my time issues
According to me u can still flash miui ROM via fast boot (even when locked)
Use mi flash tool for that (link
https://xiaomiflashtool.com/ )
U need to only use fast boot roms to flash
Link http://en.miui.com/a-234.html <---- select redmi 4a global rom from it
See the YouTube vid for process
Click to expand...
Click to collapse
Thank you bro, I tried, it, firstly it said Error: Flash Tz error" on flashing the rom via Mi flash. I did extracted it two times as stated and also tried extracting it once and I also tried placing the folder in C:/ drive (root), but the problem persists.
Also, I tried changing the drivers in device manager, but no use. I also downloaded ADB drivers, which gave me Xiaomi adb boot loader drivers but same issue.
Regarding the EDL, double clicking on edl.cmd, just reboots the phone to "MI" logo again and no black screens or red led light to show that its in the EDL mode, and I did tried flashing on the MI logo but the same results.
Please help.

Hassan Aftab said:
Thank you bro, I tried, it, firstly it said Error: Flash Tz error" on flashing the rom via Mi flash. I did extracted it two times as stated and also tried extracting it once and I also tried placing the folder in C:/ drive (root), but the problem persists.
Also, I tried changing the drivers in device manager, but no use. I also downloaded ADB drivers, which gave me Xiaomi adb boot loader drivers but same issue.
Regarding the EDL, double clicking on edl.cmd, just reboots the phone to "MI" logo again and no black screens or red led light to show that its in the EDL mode, and I did tried flashing on the MI logo but the same results.
Please help.
Click to expand...
Click to collapse
Wow wait were u trying edl or fastboot
The method I provided is for fastboot not for edl(though most of it same except u need to remove the back cover and do something)
If u think u can really do edl mode flashing the see this vid
Link :-
I think edl is the only method to fix this problem
I reccomend you to give ur phone to a shopkeeper to do it
If u think u can DL the thing that guy did in that vid u r free to go ahead