Database Develop

[Q] So I wiped System in TWRP...

Like an idiot I wiped my System inside TWRP. Using TWRP 2.6.0.2
Earlier tonight my phone starting rebooting. I was inside GooManager and tapped reboot to recovery. When I did that, for some reason my phone lost root. Meaning when I went to reboot inside TWRP it stated that it looks as if my phone is not rooted. I rebooted anyway without installing SuperSU through TWRP. I was already rooted. Afterwards, it would boot up fine but kept constantly rebooting only after a minute or two.
I went back into TWRP and clicked through dalvik wipe and cache wipe. Still got reboots. I was planning on flashing CyanogenMod anyways so I thought I'd go on and wipe everything. I went in to advance wipe and check everything. As I swiped the slider to wipe I realized I checked System too, but it was too late.
Now my phone won't boot past the HTC logo with the red text underneath. I can boot into TWRP however so I hope all is not lost. I am currently at work so I have no way to try anything on the phone at the moment but was hoping for some advice on what to try later when I get home.
I'm thinking maybe I'll be able to use the "Mount" tab in TWRP to load a ROM on and flash and everything will be well again. Would I mistaken to think that? If not, I'll purchase an USB OTG cable and use a USB stick but I really need this up an running as quickly as possible.
Also, does anyone think it would be best just to go back to stock at this point (if I can) and start from scratch?
Much thanks for your help and advice,
dgb1891

So, oddly enough I did the same thing, How I managed to recover it so you can adb sideload a rom from TWRP and have access to a "working" phone again was to find your stock recovery.img, then flash it via fastboot, and then from the hboot menu, choose factory reset and let the stock recovery do it's thing, then reflash TWRP (I honestly like CWM doe) and adb sideload a rom (presumably what you were using before). It SHOULD fix your problem and you'll be able to mount files again.

hayame said:
So, oddly enough I did the same thing, How I managed to recover it so you can adb sideload a rom from TWRP and have access to a "working" phone again was to find your stock recovery.img, then flash it via fastboot, and then from the hboot menu, choose factory reset and let the stock recovery do it's thing, then reflash TWRP (I honestly like CWM doe) and adb sideload a rom (presumably what you were using before). It SHOULD fix your problem and you'll be able to mount files again.
Click to expand...
Click to collapse
By stock recovery.img you mean a stock HTC image? - or do you mean a recovery like TWRP or CWM?

dgb1891 said:
By stock recovery.img you mean a stock HTC image? - or do you mean a recovery like TWRP or CWM?
Click to expand...
Click to collapse
Literally stock recovery.img, not TWRP or CWM.

hayame said:
Literally stock recovery.img, not TWRP or CWM.
Click to expand...
Click to collapse
K. Thanks. I have a feeling this is going to be a bit more complicated than I first thought...

I followed what you suggested and got the phone back up and working. Thanks again.

[Q] Stuck sideloading

Hey guys,
Terribly sorry if this is a common question, but after two days of searching and being unable to use my phone, I decided to post instead.
I have previously succesfully installed Cyanogen on my HTC One, using CWM. After talking to some family and friends, I decided to try out ARHD instead, as it seemed more fitting to my needs.
I download the zip, flash it from CWM, but I constantly get the error "set_metadata_recursive: some changes failed" at end of installation. I am able to continue and install seems succesful, but I can never boot past the inital white screen HTC logo. I searched for info on this, and some reported it might be due to outdated recovery. However, I have tried with CWM 6.0.4.8 and I am currently running 6.0.4.6 Touch, but no luck with either version.
At one point, I also soft-bricked my phone. I were able to flash new recovery, but had to reset my SD card and I also lost all backups. Somehow the phone booted up in Cyanogen after this, and I were able to download a zip for ARHD 81. I tried flashing this, got "set_metadata_recursive: some changes failed" and I am now unable to boot my phone again.
I have tried pushing and sideloading, however neither seems to work. Since there's no progress bar for pushing, I had to be patient, but after two hours without result I have to assume it's not working. Sideloading always gets stuck at either 3% or 8%, I can't seem to find a cause for this.
I really hope you guys might be able to work out a fix for this issue with me, as I've reached a dead end.

Unlock
I have also unlocked the phone with HTCDev unlock tool, so that should be fine.

TalkingWaterfall said:
I have also unlocked the phone with HTCDev unlock tool, so that should be fine.
Click to expand...
Click to collapse
ARHD requires TWRP Recovery
download TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
then flash it
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
now your rom will install without error

Alright. I have tried installing TWRP, but I always came up with errors booting into TWRP. I got it working once, but at that point in time I didn't have the ROM zip on my phone... I'll try it out asap and get back. Thanks.

That did it. Honestly I feel a little silly at this point, but I wish it were mentioned in the main ARHD thread that you needed TWRP, since in the "You Need" section, it simply requires a custom recovery.
I'd never seen the fastboot erase cache command before, so that helped out a lot getting TWRP working
Thank you so much!

TalkingWaterfall said:
That did it. Honestly I feel a little silly at this point, but I wish it were mentioned in the main ARHD thread that you needed TWRP, since in the "You Need" section, it simply requires a custom recovery.
I'd never seen the fastboot erase cache command before, so that helped out a lot getting TWRP working
Thank you so much!
Click to expand...
Click to collapse
Your welcome

Unfixable bootloop?

I'm what you'd call a super noob at this stuff and I've got my poor little SP in a crazy bootloop... I've tried LITERALLY EVERYTHING the internet has told me to try; wiping every cache out there, flashing custom roms, stock roms, you name it. It began when I just got CWM (don't ask me why it happened then, I have no clue why) and this is even BEFORE I put a ROM on! (I was all ready to put a ROM after getting CWM but bootloop happened).
Note: I have CWM recovery, I think I have lost my stock recovery, if I try some ROMS (ex. CM 12) they give me this error 7, once I found certain ROMS (PACMAN ROM, unofficial stock ROM) that would flash and install, they did but still left me with a bootloop, I have tried wiping so many caches it's not even funny, I've tried flashing the original firmware, nothing works... so I'm here for help.
I have looked at every google link and every method possible in trying to fix this thing! I really can't afford a new phone and I just love this one too much... please help!

farahtasnim said:
I'm what you'd call a super noob at this stuff and I've got my poor little SP in a crazy bootloop... I've tried LITERALLY EVERYTHING the internet has told me to try; wiping every cache out there, flashing custom roms, stock roms, you name it. It began when I just got CWM (don't ask me why it happened then, I have no clue why) and this is even BEFORE I put a ROM on! (I was all ready to put a ROM after getting CWM but bootloop happened).
Note: I have CWM recovery, I think I have lost my stock recovery, if I try some ROMS (ex. CM 12) they give me this error 7, once I found certain ROMS (PACMAN ROM, unofficial stock ROM) that would flash and install, they did but still left me with a bootloop, I have tried wiping so many caches it's not even funny, I've tried flashing the original firmware, nothing works... so I'm here for help.
I have looked at every google link and every method possible in trying to fix this thing! I really can't afford a new phone and I just love this one too much... please help!
Click to expand...
Click to collapse
please state your current bootloader status. Is it unlocked or still locked?

TechnoSparks said:
please state your current bootloader status. Is it unlocked or still locked?
Click to expand...
Click to collapse
I have unlocked my bootloader. Thank you for replying!

farahtasnim said:
I have unlocked my bootloader. Thank you for replying!
Click to expand...
Click to collapse
Splendid! Knowing that your BL state is unlocked, this will make the whole process A LOT easier!
http://forum.xda-developers.com/xperia-sp/development/ubl-twrp-f2fs-support-xperia-sp-huashan-t3150230
Please go to the above link to get TWRP. Also, please keep in mind that TWRP is now the only still supported recovery around. CWM and PhilZ are both really outdated and no longer maintained due to the introduction of Cyanogen Recovery which is very minimal in features.
Once you get yourself the download, extract the files from the zip and get the twrp.img file. We will need this to flash into the boot partition of Xperia SP, granting you a direct boot into recovery once it is flashed. Please then copy the original zip to your sd card, as we will be flashing the original zip via TWRP later to give you access to TWRP in the future.
Using your preferred tool, flash the twrp.img file into the boot partition.
Connect your Xperia SP via fastboot. Make sure SP is shut down, hold volume up key and connect the SP with your computer.
If you're using a fastboot tool via command prompt, the command would be
fastboot flash boot twrp.img
If you're using flashtool, hit the lightning icon in the toolbar, select fastboot mode. Then select "Select kernel to flash". Make sure the file type is "img" else you won't able to find your TWRP img file. Navigate to mentioned img file and select it.
Afterwards, when flashing complete, you may insert sdcard and start the device. It will boot directly into TWRP as we flashed a recovery to the boot partition.
Clean wipe data, cache, dalvik cache, system. You may leave internal storage.
Flash the ROM zip you acquired (make sure file integrity is checked beforehand!) then the TWRP zip earlier. Flashing the TWRP zip grants you a persisting recovery, as explained in the linked thread.
You may now reboot and enjoy

[Q] TWRP is gone

I tried to boot into recovery to make a backup but TWRP has disappeared - no recovery whatsoever. Phone boots to system only. How can this have happened? I've been using Omni for the past month or so with no problems and updating every Sunday.
To recap, I have not done any modifications since the last opdate.Tried to boot into recovery and it is gone. Since only using Omini ROM I thought it was a ROM issue but no one in the Omni thread as been able to help so posting it here.
I can probably flash it again but am puzzled why is should just vanish.

The recovery might have got updated and the last update has overwritten TWRP, so it may be the cause of disappearance, but I'm not sure. You should've got standard recovery bundled with ROM.
And yes, just flash TWRP and it should work again. No need to flash Magisk or custom kernel, since you're on custom ROM.

Recovery partitions may have been corrupted. Try fastboot erase cache, and then fastboot flash recovery (TWRP). See if it boots into TWRP then.

TRWP installed again
Many thanks to all.
Recovery back! Still don't know why it disappeared.

Moto G7+ Flashing Lineage fails -> Touch doesn't work anymore - Brick?

Hello guys!
Yesterday I tried to flash the newest Lineage-built to my new G7+ (XT1965-3, bought in Germany via Amazon), but something went wrong and now I'm afraid, I bricked my phone.
It's not my first flash of Lineage, as I did this in the past already on some older Phones (SII, SIII, S5), but it's the first time, that I have a major issue.
So I followed all the steps on the Lineage-Wiki (on Win10).
After flashing the recovery (the lineage-recovery, not TWRP) I wasn't able to enter the recovery-mode, so the phone booted to StockRom. And probably this was the problem: As it didn't react to VolumeDown+Power, I reflashed the recovery a second time. After that the touch-screen is not working any more.
I am able to enter the recovery-mode and I can boot to Stock-Rom, but in both modes the phone does not react to touch, so I can only use the Volume- and Power-Buttons.
Probably I made more mistakes after that: I thought, that a factory-reset would help, but It didn't. I also relocked the bootloader, but as I saw, that it also did not bring any solution, I unlocked it a second time.
Conclusion: I have a brand new phone, with lineage-recovery, an unlocked bootloader but without touch working.
I also tried to flash Lineage, but the sideload got stuck at 47%. So Lineage is not installed and it boots into Stock, where I can not get any further without touch.
Has anyone any idea, what could be the issue and how I can fix it? I would like to start from scratch, but I don't know, what is the exact problem and if i can for example return to stock recovery.
Thank you!
---- EDIT ----
If it helps: I am able to boot TWRP via "fastboot boot twrp-xxx.img". And in TWRP the touch works!
I could flash lineage directly via TWRP from external sd-card, but i am afraid that after that I won't be able to return if something goes wron.

probably your best bet is to go right back to stock using the LMSA tool and starting fresh. I've seen others encounter similar issues on different devices and always the cleaneast solution was just to role back everything and start over.

Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.

joglxv said:
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
Click to expand...
Click to collapse
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.

digitaljeff said:
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
Click to expand...
Click to collapse
I'm having a similar problem. At first touch was fubar but I was able to return to stock using LMSA and now touch works. I can load TWRP with fastboot and even install a custom ROM and TWRP, but installing any custom ROM results in a boot loop during the finding and installing updates part of the phone setup during first boot. I'm tried Evolution X which I was running previously(for about a month, and then a boot loop started yesterday), PixelOS 10, and AncientOS, but all result in the boot loop on first boot after connecting to wifi.

Fixed
I fixed this somehow by manually flashing the latest stock firmware to slot a, and then extracting the evolution x Rom and manually extracting the IMG files inside and manually fastboot flashing those to slot b. I then set b as the active slot and booted up, patched the boot image with magisk, flashed that, and everything works. Not sure why twrp wouldn't do the trick.

Finally had the time to install Lineage. Now everything works.
I followed the instructions someone posted in the [ROM][OFFICIAL] LineageOS 17.1 [nightlies]-thread and the instructions of the lineage-wiki:
1. fastboot boot TWRP
2. sideload the copy-partitions.zip from lineage-wiki
3. factory reset via TWRP (wipe cache, dalvik and data)
4. sideload lineage
5. reboot bootloader
6. fastboot boot TWRP
7. sideload magisk
8. reboot system
Had a little bootloop the first time rebooting the system, but that was because I forgot to wipe data-partition in step 3. Wiping data and rebooting did it for me.
So I have a working Lineage17.1 with root via Magisk.
Thank you for the help!

I had exactly the same problem like you had. Bought a brand new moto g7 plus and after recovery flash, Touchscreen was not working anymore. I could manage to go back to the bootloader, sideloaded TWRP, but side loading lineage worked for me then. It seemed to be stuck on 47 percent, but this seems to be a normal issue, the file was there and after installing, touchscreen worked normally.