I have a Galaxy Gear that I barely use because most of the time when I'm out I'm at work.
In the past few months, I noticed it had issues charging and later issues turning on. I just realized now that the bottom part of the screen is actually popping off causing the watch to not charge or turn on. It turns on when I squeeze it together. If I squeeze the bottom part, it seems the top is also coming off, although not as much.
Has anyone had this occur on their watch?
I'm thinking on taking it apart and using Ultra Gel to glue it back together. That stuff is strong.
Any solution? I have a same broblem.
Related
I have experimented with various screen protectors on the Moto X. The one that I have on now covers the left side portion by the ear speaker. I have also seen screen protectors that purposely have this area cut out of the screen protector. I believe that this is where the light sensor is. I have been trying this screen protector out for a couple days (it is a anti-glare kind and is opaque) I have noticed that the active notifications don't come on as much...however, this may all be in my head. Curious if anyone else had tested this. See attached picture.
The screen protector I used ( Xtreme guard) has an extra area cut out to the left of the speaker, i guess for the proximity/light sensors..
and I don't have any issues with active notifications.. maybe you can cut it out?
That is the proximity / light sensor. Play with it when you're in a call - cover it up with your finger, and the screen goes off, remove your finger, and the screen comes back on. That's how your phone knows it's up to your face and to turn the screen off so you don't accidentally face dial. Some screen protectors don't affect it, others seem to. I don't doubt that your active notifications are funny if that piece is covered up. I had a tempered glass protector on that covered it. I had some issues with the screen not coming on when I took my phone away from the face to end the call. Sometimes active display would randomly turn on when the phone was sitting still on my desk. After I switched to a different brand that didn't cover it up, my problems went away.
Thank you for the info. I had a feeling that there was something up because it was acting a little random after putting that protector on. I don't think all companies really test their accessories on the phones they make them for...other than that they fit okay but not if they affect performance. Those test would take too much time. Funny thing is I got them from a Sprint store and they were $20 for two :/ . I found some, actually the exact one's Moto's sight selling, on Amazon for around six dollars something and they have a space cut out for that area.
I've seen some threads about this on other tabs, like the Galaxy Tab 10.1, but not on the Asus tablets yet. On my TF701T, I noticed over the past month that when I take it out of the case I have for it (a neoprene case with a zipper), it has a spot in the middle about the size of two quarters that looks like moisture under the glass.
Within a few seconds of turning it on (and sometimes not even turning it on), it disappears by quickly getting smaller and smaller into the center.
All of this, not a big deal.
However, last night I saw something even more odd....the spot disappeared with the exception of a ring of moisture (instead of a full circle) that stayed and wouldn't go away (again, slightly larger than a quarter). Touching parts of the screen would jiggle the ring. It seems like something was happening in the LCD display.
In the past when it went away, I assumed the screen was warming up and causing it to go away. However since it didn't this time, I thought something was damaged.
I saw a bizarre thread somewhere that suggested to put it in the fridge or freezer for a short time and the cooling would make it go away....if I remember correctly, it may have implied that the LCD and digitizer where touching or stuck together. I figured, what the heck, I stuck it in the freezer for a few minutes. When I got it out, it was nice an cold, and the spot was gone.
Has anyone seen this? Anyone know anything about what this would occur and why the cold would fix it?
Thanks,
chris
I had exactly the same issue you described. The moisture spot would always go away eventually. However, one day, while in use, the screen suddenly died. The tablet was still working fine (confirmed with an hdmi cable). I was unlocked, so the tablet became useless. I have no idea if the moisture and screen failures were related or not, but if you are not unlocked, I'd probably try to get it repaired.
I suspect that what you and I have is a gap between the LCD and the digitizer. We have (3) tf701t's in our house now and no moisture spots yet on any of them.
Hope this helps.
derekk1 said:
I had exactly the same issue you described. The moisture spot would always go away eventually. However, one day, while in use, the screen suddenly died. The tablet was still working fine (confirmed with an hdmi cable). I was unlocked, so the tablet became useless. I have no idea if the moisture and screen failures were related or not, but if you are not unlocked, I'd probably try to get it repaired.
I suspect that what you and I have is a gap between the LCD and the digitizer. We have (3) tf701t's in our house now and no moisture spots yet on any of them.
Hope this helps.
Click to expand...
Click to collapse
Thanks, good to know. I am unfortunately already rooted and running sbdags rom. It is interesting that it only happens when I have had it in the case for a little while. Hadn't happened again for about a week, but started happened again last night. Fortunately, it went away on its own again very quickly. Oh well, it is what it is.
blickley said:
I've seen some threads about this on other tabs, like the Galaxy Tab 10.1, but not on the Asus tablets yet. On my TF701T, I noticed over the past month that when I take it out of the case I have for it (a neoprene case with a zipper), it has a spot in the middle about the size of two quarters that looks like moisture under the glass.
Within a few seconds of turning it on (and sometimes not even turning it on), it disappears by quickly getting smaller and smaller into the center.
All of this, not a big deal.
However, last night I saw something even more odd....the spot disappeared with the exception of a ring of moisture (instead of a full circle) that stayed and wouldn't go away (again, slightly larger than a quarter). Touching parts of the screen would jiggle the ring. It seems like something was happening in the LCD display.
In the past when it went away, I assumed the screen was warming up and causing it to go away. However since it didn't this time, I thought something was damaged.
I saw a bizarre thread somewhere that suggested to put it in the fridge or freezer for a short time and the cooling would make it go away....if I remember correctly, it may have implied that the LCD and digitizer where touching or stuck together. I figured, what the heck, I stuck it in the freezer for a few minutes. When I got it out, it was nice an cold, and the spot was gone.
Has anyone seen this? Anyone know anything about what this would occur and why the cold would fix it?
Thanks,
chris
Click to expand...
Click to collapse
I have also noticed the same spot after pulling my tablet out of the neoprene case. I have been getting itchy to root but now I will hold off. Maybe I should try the freezer fix?
Thanks for post!
ASUS Tf701 moisture ring center of glass
I had this happen in the past, but it always went away when I turned the tablet on. I always store it in a leather case, the screen never touches anything. It recently came back and will not go away. I've been reading threads about putting it in the freezer for a short time....my question is, how long have people left it in there, 2 minutes, 5 minutes? The spot is driving me crazy since it now won't go away.
Thanks for your assistance!
Roni
I have the same problem with my TF701T. But I noticed it isn't moisture between the screen but digitizer and the LCD screen touching eachother? If you bend the tablet really slightly towards you, you'll see the "moisture" go away. Don't have to apply too much force. Might be just design flaw IMO.
Just picked up a second hand S4 Active. At times, the screen gets jumpy. It looks as though you are trying to swipe between screens. Also, it will at times go unresponsive. Touching the power button to turn the screen off, then turning it back on with power or home, fixes it.
I am going to take it apart to see if there are any signs of corrosion, and make sure the LCD connector is tight. I really don't think it has water damage, because the stickers are white. I suppose they could have been replaced.
I saw some youtube things that said a swelled battery could be the culprit, but the battery is not swelled at all.
Any ideas on this? It's a flicker - it jumps around. Turning the screen off and on fixes it, so I'm not really sure what the deal is.
Thanks much.
Should have added - it's on stock 4.4.2, if that matters.
My OP3 was kept in a bag (water resistant), during a heavy rain, I thought the phone is safe in that bag. But some water got leaked into the bag and the phone was kept in the bag for almost 1hour.
When I checked the phone after reaching home, it's got turned off(enough charge was there), I tried to turn it on, it did light up for a while and then turned off. I used a hair dryer to dry it and kept it in rice for 2 days. After that, it turned on normally, I tried to charge it. I got a call after few minutes of charging, spoke for a minute, but after the call the screen didn't light up. My phone is working fine except the screen. touch is working fine, I can unlock using the touch screen (It has a pattern lock), I can use google assistant to make calls, play music. But just that screen is not lighting up.
I am not sure what to do now, I think the issue is because of some short circuit. I don't think it's a right question to ask, can it be fixed without the whole screen replacement? (I think screen costs too much for my budget), also please share me if you have any links for buying the screen.
Thanks, everyone, have a nice day.
It's very likely that there is "only" some corrosion by the display connector because of the water. This probably causes the short circuit. If you can see some corrosion inside the phone (especially under the display connector) on the board, clean it carefully with a soft toothbrush and Isoprpyl alcohol (from the pharmacy).
Worked for me on my old Xperia.
Good luck!
imtmh said:
My OP3 was kept in a bag (water resistant), during a heavy rain, I thought the phone is safe in that bag. But some water got leaked into the bag and it was kept in the bag for almost 1hour.
When I checked the phone after reaching home, it was off, I tried to turn it on, it did light up for a while and then turned off. I used a hair dryer to dry it and kept it in rice for 2 days. After that, it turned on normally, I tried to charge it. I got a call after few minutes of charging, spoke for a minute, but after the call the screen didn't light up. My phone is working fine except the screen. touch is working fine, I can unlock using the touch screen (It has a pattern lock), I can use google assistant to make calls, play music. But just that screen is not lighting up.
I am not sure what to do now, I think the issue is because of some short circuit. I don't think it's a right question to ask, can it be fixed without the whole screen replacement? (I think screen costs too much for my budget), also please share me if you have any links for buying the screen.
Thanks, everyone, have a nice day.
Click to expand...
Click to collapse
Open up the phone and clean it out.. Might be some corrosion indeed. Watch JerryRigEverything, he explains it very well. I wonder, how much water came inside?
imtmh said:
My OP3 was kept in a bag (water resistant), during a heavy rain, I thought the phone is safe in that bag. But some water got leaked into the bag and it was kept in the bag for almost 1hour.
When I checked the phone after reaching home, it was off, I tried to turn it on, it did light up for a while and then turned off. I used a hair dryer to dry it and kept it in rice for 2 days. After that, it turned on normally, I tried to charge it. I got a call after few minutes of charging, spoke for a minute, but after the call the screen didn't light up. My phone is working fine except the screen. touch is working fine, I can unlock using the touch screen (It has a pattern lock), I can use google assistant to make calls, play music. But just that screen is not lighting up.
I am not sure what to do now, I think the issue is because of some short circuit. I don't think it's a right question to ask, can it be fixed without the whole screen replacement? (I think screen costs too much for my budget), also please share me if you have any links for buying the screen.
Thanks, everyone, have a nice day.
Click to expand...
Click to collapse
Yes mate, this is your only option, to open up the phone and check for rust. Be sure to dissconect the battery, and use coke in case you find any corrosion or rust. Googd luck
I haven't had a single problem with my tablet until yesterday when after taking it from my bag after a car ride the screen only had some flickering lines on it. After applying a little pressure and hitting it lightly, it turned on, but now it's totally unusable. It didn't fall. What may have caused this?
imgur.com/a/oFbbi
Maybe the screen connector got loose. You'd have to open it to check.