Related
OTA captured for MyPhone UNO LP 5.x.x
Download Link :
LBY29G to LMY47O (LP 5.1.0)
OFFICIAL OTA LMY47O For Stock Recovery
MODIFIED OTA LMY47O For Custom Recovery
LMY47O to LMY47V (LP 5.1.1)
OFFICIAL OTA LMY47V For Stock Recovery
UNIVERSAL OTA LMY47V for SPROUT4 and SPROUT8 (11+ MB)
LMY47V to LMY48K (LP 5.1.1)
UNIVERSAL OTA LMY48K for SPROUT4 users (Custom Recovery)
NOTE: Only compatible w/ Stock LP unmodified. If you are rooted and unlocked, try the Modified and Universal OTA and make sure to fully unroot your device before proceeding to prevent bootloop...No need to wipe data unless you encountered problems.
Official OTA : Original OTA from google without any modification
Modified OTA : updater-script was modified (OLD) (For MyPhone UNO Only)
Universal OTA : updater-script was modified to support all Android One 1st gen devices
Flashing Instructions:
• Download the file
• Place the OTA zip on your sdcard
• Reboot to stock recovery/custom recovery and install ota file
• Reboot and be patient
MD5 checksum
Official : 545d3ad27d47110fa62c19de3c8932fb
Modified : b27757151d666f8a1c0a47111da8e9c6
STOCK ROM : SPROUT
Flash at your own risk
Credits : google, xda, varun.chitre15, yuweng, carliv, AandreHartmen, GeloJuvida, JosephGodslave
.
Ohh !! Thank god it's finally here
I've been dying for this update
Tnx dude ur the best!!
Speaking of stock recovery... I don't have it. I replaced it with CWM. Can you provide one if possible? The one located in this thread is from KK, and makes the zip file think my phone (pun not intended) is still on KK. If you can't then I'll just wait for the rom instead.
staircases said:
Speaking of stock recovery... I don't have it. I replaced it with CWM. Can you provide one if possible? The one located in this thread is from KK, and makes the zip file think my phone (pun not intended) is still on KK. If you can't then I'll just wait for the rom instead.
Click to expand...
Click to collapse
Sadly, I forgot to backup the stock recovery of this device just flash the stock recovery of other android one devices such as the mmx canvas A1 http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150... or the cherry mobile one http://intersectraven.euroskank.com/stock/Android One/LBY29G/
This OTA will not work on Kitkat because its only 20+mb. The OTA for MMX Canvas A1 is advisable if you are on KK http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879. I will upload the stock rom tomorrow or on saturday.
Edit : Dude, make a backup and try to flash the Modified OTA
LMY47O to LMY47V (LP 5.1.1)
UNIVERSAL OTA LMY47V for SPROUT4 and SPROUT8 (11+ MB)
Credits to the one who captured the OTA links for Sparkle V and Symphony Roar A50...
I'm on stock canvas a1 with LP 5.1. Will my phone still be official and pure stock if I use the universal OTA?
UPDATE: I decided to go ahead and try. Downloaded universal ota for 4gb variant. Got these error messages. "failed to verify whole signature, signature verification failed, installation aborted".
-BRK- said:
I'm on stock canvas a1 with LP 5.1. Will my phone still be official and pure stock if I use the universal OTA?
UPDATE: I decided to go ahead and try. Downloaded universal ota for 4gb variant. Got these error messages. "failed to verify whole signature, signature verification failed, installation aborted".
Click to expand...
Click to collapse
All the 4gb variants OTA's have identical contents and signature except the updater-script. So Yes, your MMX A1 will still be official. The problem is you need custom recovery, there is an info on how to temporarily boot Custom Recovery on this forum. If you manage to do that, after flashing the OTA just reboot and your phone will still be unmodified with warranty Try that one bro
dear staircases,
i will check if i manage to extract the STOCK RECOVERY from the Nandroid backup i made then i hope i could email you. my build number is: LMY47V... (*I did the nandroid backup via devam03's wonderful tutorial: http://forum.xda-developers.com/cro...-stock-rom-t2948442/post59564925#post59564925)
hope to get back to you later,
bod68
Thanks sir
Android One Universal STOCK ROMs [M/LP/KK]
These ROMs are 100% Stock without any modification. Latest versions were backed up by the command "dd". LP versions were Identical from the official captured OTA LMY47O merge with the Official OTA. These roms are put together for rooted users who wants to fall back to google stock rom, And also for users who are having issues while installing the latest OTA. Nothing is removed from the original rom, and all signatures are intact. SPROUT8 LMY47V was based with the CM One fastboot images by @intersectRaven and captured Nexian Journey OTA LMY47V by Aandre Hartmen. KitKat Rom was based with the Official KPX44 MMX A1 Flashfile by moulnisky. Lastly, please take the time to read the instructions, FAQ, carefully and thoroughly before proceeding....
SPROUT4 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Micromax Canvas A1 AQ4501 (India)
Karbonn Sparkle V (India)
Spice Dream UNO (India)
MyPhone Uno (Philippines)
Symphony Roar A50 (Bangladesh)
- FEATURES
Move To SD [LP/KK]
Hidden Internal Storage (Apps only) [LP/KK]
If you are rooted, you may access your internal storage by navigating to "/data/media/0" [LP/KK]
SPROUT8 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Cherry Mobile One (Philippines)
Nexian Journey One (Indonesia)
Mito Impact (Indonesia)
Evercross One X (Indonesia)
Micromax Canvas A1 AQ4502 (India)
QMobile A1 (Pakistan)
- FEATURES
Internal Storage and SDcard are both accessible [LP Only]
No move to SD feature out of the box [LP Only]
move to SD feature is only available on Kitkat, Internal storage is not accessible [KK Only]
FLASHING PROCEDURE :
Download the ROM
Move the file to sdcard
Reboot to Custom Recovery
Install via Philz recovery if you want to fall back to stock recovery
Install via TWRP to stop the restoration of stock recovery
(ensure that "MOUNT SYSTEM PARTITION READ-ONLY" is uncheck)
Backup your current ROM (just in case)
No need to Wipe DATA (Read FAQ for more details)
Locate the file and install
Reboot... It will take about 10-15 minutes so be patient
Frequently Asked Questions :
1. Are they both compatible with my device?
Yes, as long as you are using an Android One first generation..
No need to unlock or re-lock bootloader
Install via custom recovery only
2. Will I still be able to recieve the official OTA updates in the near future?
Yes, as long as you have installed the default Stock ROM version for your device.
If you had installed Sprout4 over an Sprout8 device, the official OTA will fail due to mismatched signatures.
As long as you've never rooted and flash a custom recovery.
In case you have rooted your device, all you need to do is reflash the ROM when a new ota arrives and you'll be fine
3. Do I need to Wipe my Data and cache partitions before flashing the ROM?
Installing a sprout4 stock rom over an sprout4, no need to wipe anything.
Otherwise, if you flashed sprout4 over an sprout8 rom, you have to do a clean install.
Sprout4 to Sprout4 = No need to wipe data,cache partition
Sprout8 to Sprout8 = No need to wipe data,cache partition
Sprout4 to Sprout8 = Need to do a clean install, wipe data,cache,system
Sprout8 to Sprout4 = Need to do a clean install, wipe data,cache,system
If you are having apps FCs, try clearing the app data of the affected app, or try hard reset.
If all else fail, do a clean install.
4. How to install Stock ROM over a Custom ROM?
Backup your current ROM (just in case)
Its a Stock ROM, no need to downgrade or unroot your device
Install it like how you install your preferred Custom ROM for the first time
Do a clean install by wiping data, dalvik, cache and system
5. Got stuck with "Patching system image unconditionally"?
It might be a bad download
Always verify the hash prior to installation (check the howto verify the MD5sum below)
Wipe the system partition just in case
6. Why was my Custom Recovery perished?
If you flash the Stock ROMS using Philz Recovery 6.57.9. Your device will reverted back to Pure Stock including the Stock Recovery.
How to avoid this? If you have access to Aroma Filemanager using Philz, rename /system/bin/install-recovery.sh and /recovery-from-boot.p or flash superSU before rebooting your device.
Or simply use TWRP, prior to flashing the Stock ROM.
Just go back to Philz soon after the boot process was over if you wish to.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
7. For users who are having Irregular data connection and phone shows 'Emergency Calls Only'.
Go to Settings>More>Cellular networks>Access Point Name> then select the correct apn for your carrier.
If the problem still exists, go to Settings>More>Cellular network>Network Operator> then select the correct carrier.
WARNING!!!! PLEASE READ...
By installing the rom via philz recovery, android will automatically restore the stock recovery... Its a good thing for users who wants to go back to pure google stock rom.
WORKAROUND: If you wish to keep a Custom Recovery, and have access to Aroma Filemanager via Philz recovery, just rename /system/bin/install-recovery.sh and /recovery-from-boot.p, or simply flash superSU before rebooting your device.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
The simplest method to retain a custom recovery is to use TWRP prior to installation
Then flash Philz soon after the boot process was over if you wish to.
So basically.....
If you wish to be on Pure Stock with Stock Recovery... install it with Philz (CWM).
If you wish to be on Pure Stock and keep a Custom Recovery... install it with TWRP.
Recommended Recoveries
TWRP (SPROUT ALL) with Logo and OEM backup partition support
TWRP Materialize (SPROUT ALL)
TWRP Official (SPROUT4 ONLY)
Philz Recovery (Sprout ALL) flash this if you wish to go back to Philz Recovery
Stock Recovery (Sprout)
How to Root my device?
Just flash SuperSU with a custom recovery..
Or follow varuns rooting guide
MD5 Sum
[SPROUT4 MRA58M] c75b28612f0a77ac5fc27084da4b6558
[SPROUT8 MRA58M] 7e34ce53e6bee8bb8adf635a05e2db7a
[SPROUT4 LMY48K] c0bd0113a84fdd03a0c7f3d245d71b67
[SPROUT8 LMY48K] 705b56acb2159b0fa9f05a86e7818db4
[SPROUT4 LMY47V] 9f62914a94e9b0ec5abd445120bd3b7c
[SPROUT8 LMY47V] 0063e621f6ffed6d0fe142de7e502d4d
[KITKAT KPX44] 377ea840259be29aa3383ab1757a6ede
How to Verify the MD5 signature?
If you are running Windows just download HashTabs and install. Right click on the downloaded file then click properties and look for "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip". On your phone, just use ES explorer and then click properties then tap "Show Checksum" then compare the md5 hash. If the file hashes are identical you are good to go, Otherwise, redownload the file again due to bad probably.
Universal OTA
Intended for users who have limited bandwidth. Otherwise, use the stock roms.
Flash via custom recovery only
OTA MRA58N from MRA58M (M 6.0) UNIVERSAL
OTA MRA58N for SPROUT4 and SPROUT8 MRA58M users only
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48M from LMY48K (LP 5.1.1) UNIVERSAL
OTA LMY48M for SPROUT4 and SPROUT8 LMY48K users only(7+ MB)
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48K from LMY47V (LP 5.1.1) UNIVERSAL
OTA LMY48K for SPROUT4 and SPROUT8 LMY47V users only(18+ MB)
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY47V from LMY47O (LP 5.1.1) UNIVERSAL
OTA LMY47V for SPROUT4 and SPROUT8 LMY47O users only(11+ MB)
Unroot first...then flash via custom recovery...Credits to the one who captured the OTA links for Sparkle V and Nexian Journey One...
Click to expand...
Click to collapse
Flash at your own risk :good:
.
Credits : google, xda, varun.chitre15, OTA catchers, IntersectRaven, ghpranav, AHartmen, JGodslave, moulnisky, xpirt, rhar****, akhilnarang
.
will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.
-BRK- said:
will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.
Click to expand...
Click to collapse
it might work with locked bootloader, but it might not work with stock recovery. This ROM was based on Sparkle V OTA LMY47O + OTA LMY47V, 99% is unmodified except the updater-script to make the OTA fuse together and universal. So i am 100% sure it would work if you flash it thru custom recovery.
How to verify signature...??? Plz reply...
Vaibhavtheboss said:
How to verify signature...??? Plz reply...
Click to expand...
Click to collapse
If you are running windows os just download HashTabs and install. Right click on the downloaded file then click properties and click "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip" then compare the md5 hash. If the hash are identical you are good to go... If not, your file was corrupt
Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app
Vaibhavtheboss said:
Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app
Click to expand...
Click to collapse
Im glad it worked for you mate
installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums
mrahmanda said:
installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums
Click to expand...
Click to collapse
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.
installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:
1cefire said:
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.
Click to expand...
Click to collapse
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Sent from my MITO_A10 using XDA Forums
Cant intall or open
Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version
mahesoo said:
installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:
Click to expand...
Click to collapse
mrahmanda said:
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Click to expand...
Click to collapse
You're welcome dudes
gestrinix said:
Cant intall or open....Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version
Click to expand...
Click to collapse
If you can't open the file It was probably corrupt. Read back to post #5 and try to verify the md5 hash. I was running cm 12.1 before, and currently running SPROUT8 on my 4gb variant Myphone UNO... running smooth without any hiccups... If the hash is not identical, try redownloading the file. Here is the md5 checksum
[SPROUT8 MD5] 0063e621f6ffed6d0fe142de7e502d4d
SPROUT8 running on 4gb variant MyPhone Uno
Do you have stock recovery for 5.1.1 sprout8?
fachry_my_id said:
Do you have stock recovery for 5.1.1 sprout8?
Click to expand...
Click to collapse
You don't have to go back to stock recovery to flash the ROM. Just flash it thru custom recovery, Philz/TWRP works fine
After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol
Kumarankav said:
After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol
Click to expand...
Click to collapse
I guess what you saw was stock recovery. But the strange thing is this ROM does not include stock recovery. Are you sure you flashed the same ROM? maybe you flash a different one? This ROM is basically the same official OTA LMY47O from this thread and the official OTA LMY47V. I have flashed both ROMS a couple of times without problems... Anyhow, if you want to go back to custom recovery just install another one thru fastboot, allinonetools, flashify and so forth
Here's a proof... Only Boot.img (kernel) and System partition + OTA LMY47V are included
error update from 5.1 to 5.1.1 mito impact A10
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?
Thanks
im using evercoss a65 and its work
tyvm
agUNg.XENOS.inc said:
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?
Click to expand...
Click to collapse
Did you flash the OTA LMY47O from 4gb variants before? Or are you using custom recovery? The best way is to Join Mito Impact a10 FB group and ask them if they have Official Ota LMY47V for mito, just flash it with stock recovery once you have the official ota. If it fails to flash, try factory reset then flash the official ota again. If all else fail, just flash a custom recovery with fastboot method without rooting your device, then flash the SPROUT8 version in the OP.
morissax said:
im using evercoss a65 and its work
tyvm
Click to expand...
Click to collapse
welcome mate
Currently on 4.4.2 and looking to upgrade to the latest rootable software. Could never get Bootstrap or any of the others. Thanks.
scjsean said:
Currently on 4.4.2 and looking to upgrade to the latest rootable software. Could never get Bootstrap or any of the others. Thanks.
Click to expand...
Click to collapse
1. Install towelroot (https://towelroot.com) and root your phone. Download supersu and busybox from playstore and install them. Download and install safestrap (http://forum.xda-developers.com/devdb/project/?id=2054#downloads)
2. Download the pre-rooted OC2 stock rom (lollipop) from here: https://mega.nz/#!qc8QHI6T!_8x88BL-ivTM0yj5uhbmNITernym8HMr2VKJJZB9JeE
3. Download SuperSu zip from here:http://forum.xda-developers.com/showthread.php?t=1538053
4. Download the OC1 Patch firmware from here: https://mega.nz/#!bMlBnSyZ!5v1-_p57s7es95Oj33n1mQ9EseDastIegMcT0MEu5XY
5. Download the OC2 Patch firmware from here: https://mega.nz/#!iF8xBS6Z!XQNgLscWM5SOOddlkunQYBCQp2QO03raEMN91sF1g34
6. Download Xposed framework (optional) from here: http://forum.xda-developers.com/attachment.php?attachmentid=3454433&d=1440761913
7. Download OC1/OC2 fixes/patches from here (download only the ones you think you'll need): http://forum.xda-developers.com/note-3-att/development/8-24-15-t3185574
8. Put all these zips in a single folder either in your internal storage or on your extSD card.
9. Run and install safestrap and reboot to recovery.
10. In the recovery, go to advanced wipe and factory reset your device.
11. Flash the zips that you've downloaded in steps 7-12 in the following order:-
Flash main ROM
Flash SuperSU
Flash Xposed (optional)
Flash OC1 patch firmware
Flash OC2 patch firmware
Flash OC2 Addons/Fixes
Wipe Dalvik Cache
Reboot
17. It'll take a while to boot since the ROM is de-odexed, give it 15 mins or so, and when it boots, you'll have a rooted OC2 lollipop firmware. Enjoy!
sam.stalker1608 said:
1. Install towelroot (https://towelroot.com) and root your phone. Download supersu and busybox from playstore and install them. Download and install safestrap (http://forum.xda-developers.com/devd...ct/dl/?id=7216)
2. Download the pre-rooted OC2 stock rom (lollipop) from here: https://mega.nz/#!qc8QHI6T!_8x88BL-i...HMr2VKJJZB9JeE
3. Download SuperSu zip from here: http://forum.xda-developers.com/atta...5&d=1442612185
4. Download the OC1 Patch firmware from here: https://mega.nz/#!fQ8nSbbA!qzw9IzKf6...Yv-AV4NsjyuiT8
5. Download the OC2 Patch firmware from here: https://mega.nz/#!iF8xBS6Z!XQNgLscWM...3raEMN91sF1g34
6. Download Xposed framework (optional) from here: http://forum.xda-developers.com/atta...3&d=1440761913
7. Download OC1/OC2 fixes/patches from here (download only the ones you think you'll need): http://forum.xda-developers.com/note...24-15-t3185574
8. Put all these zips in a single folder either in your internal storage or on your extSD card.
9. Run and install safestrap and reboot to recovery.
10. In the recovery, go to advanced wipe and factory reset your device.
11. Flash the zips that you've downloaded in steps 7-12 in the following order:-
Flash main ROM
Flash SuperSU
Flash Xposed (optional)
Flash OC1 patch firmware
Flash OC2 patch firmware
Flash OC2 Addons/Fixes
Wipe Dalvik Cache
Reboot
17. It'll take a while to boot since the ROM is de-odexed, give it 15 mins or so, and when it boots, you'll have a rooted OC2 lollipop firmware. Enjoy!
Click to expand...
Click to collapse
Rom says I need a key on Megaupload.
Well it seems that I am unable to get the stock rom. Weird that I can't find it anywhere.
scjsean said:
Well it seems that I am unable to get the stock rom. Weird that I can't find it anywhere.
Click to expand...
Click to collapse
Sorry, all links updated!
cheers! Have you done this personally. There is an option to restore to a given backup and install twrp. Worth it?
sam.stalker1608 said:
Sorry, all links updated!
Click to expand...
Click to collapse
Everytime I flash it with stock recovery it somehow boots into KitKat again and factory resets the phone.
scjsean said:
Everytime I flash it with stock recovery it somehow boots into KitKat again and factory resets the phone.
Click to expand...
Click to collapse
The recovery I meant was safestrap recovery (not the stock recovery), since you cannot flash custom roms using the stock recovery.
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Yo, just flash universal zip of 6.0.1
sachin n said:
Yo, just flash universal zip of 6.0.1
Click to expand...
Click to collapse
Yes i did that to...bt it didn't work...
abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
first rtell if your device is stock or rooted and on a custom recovery?
if rooted , then download 6.0.1 stock rom, if not rooted, then just wait for ota update..
abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
Error 7 is usually cause of modified system files. Did you removed some system apps or installed xposed framework? If yes, the easiest way to install the ota is flash the full rom. The universal ota is already available which can be flashed in any Android one (Sprout 4) phone.
You can download the files from here:
http://forum.xda-developers.com/showpost.php?p=64733678&postcount=238
Faced the same problem.
I was on stock rom with twrp. Flashed thunderzap 3.5 kernal and then Super Su. No other modifications was done on my side(no system app remove and no xposed). Tried flashing 6.0.1 ota. Failed. So I think that's the kernal problem. I'm not sure though. Do we require original kernal for flashing ota in mm...
Edit update. I was wrong. Tried flashing 6.0.1 ota with official kernal too. Failed again with twrp. Then flashed with cwm, again failed error code 7 again. Let me try it with official recovery. Wait for results...
abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
naturist said:
Error 7 is usually cause of modified system files. Did you removed some system apps or installed xposed framework? If yes, the easiest way to install the ota is flash the full rom. The universal ota is already available which can be flashed in any Android one (Sprout 4) phone.
You can download the files from here:
http://forum.xda-developers.com/showpost.php?p=64733678&postcount=238
Click to expand...
Click to collapse
Found the problem. It is related to the user release keys and build props. Our phone should have 6.0/MRA58N or M. But it has 4.4.4/KPW53 user release keys. See the attachment. So I searched Google. See this forum
http://forum.xda-developers.com/oneplus-one/help/failed-zip-update-instalation-via-twrp-t3137841
It is for one plus one. But they faced the same issue. Any solution found please report.
Found the solution.
abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
Ota doesn't install because the recovery have wrong fingerprint of build no. The solution is very simple. Reflash 6.0 ota and do clean install. Don't flash recoevery or kernal. Now your default recovery os changed to stock again. Now download next mra58n ota. Don't download universal ota's as they might fail via stock recovery. Download device specific ota's.
And now if your build no. is mra58n then you can flash 6.0.1 ota file (75.6mb). Screenshots of successful install attached after facing same problem. Now on stock with jan patch installed too..
hello, i have an old twrp.... and i would update it to use a nougat rom.
I sincerely did not remember how i flashed it, is there any method to flash a newer twrp, using my actual twrp?
if not, could you provide me a link where i can find the latest twrp to download, and a GUIDE to flash it?
thanks in advance
1.Download the official twrp app
2.select your device
3.download .img file
4flash the downloaded file with the option in twrp app
5.done
(Sry 4 bad english)
i found it on needrom
https://www.needrom.com/download/twrp-recovery-25/
it works good i flashed aosp extended rom 4.4