2nd Gen Moto G bricked after update - G 2014 Q&A, Help & Troubleshooting

I have a rooted 2nd Gen Moto G XT1068. I used CF auto root to root the device.
I tried to update it when a notification appeared that an update is available and now its stuck on the "Warning bootloaded Unlocked" screen.
I tried pressing the Down + Power button and it shows the fastboot menu. I tried selecting each menu available.
- "Normal powerup" menu is still stuck on the "Warning bootloader Unlocked" screen.
- "Recovery" menu shows the dead android with the no command message below. Pressing the up, down power button while on this screen does nothing.
- "Factory" menu also shows the "Warning bootloader Unlocked" screen.
- "Barcodes" menu shows the barcodes of the device
- "BP tools" also shows the "Warning bootloader Unlocked" screen.
What can I do to revive my device?

I cant even turn it off. Its just stuck at the "Warning bootloader Unlocked" screen

Try to boot into fastboot and flash a stock rom via fastboot.

Try the stock easy installer

Its fixed now by flashing stock firmware. I just lost my old data on the device

Related

XT1064 Stuck in fastboot mode (Recovery option wont open)

Hi guys, I buyed a phone used phone with this problem. The original owner tryed to flash a custom rom and at the middle of the progress the phone shut down because low battery. Then, when they turned on the phone, it only boot in fastboot mode. In fastboot mode, Recovery option wont open, Normal boot wont open too. The bootloader is unlocked. Then, i tryed to flsah a 5.0.2 stock rom but the console show me up an error like "FAILED" or "bootloader FAILED" The phone shows "recovery downgrade" in purple. I tryed 6.0.0 too and Kit Kat for the XT1064 USA version. I cant flash nothing, always the same error. i installed Motorola drivers, ADB, etc. Any help?
Bootloader version is: 48.07. I serarched this number in google and it shows a 5.1.1 custom rom. Propably this rom was the same that he tryed to flash before, i dont know. Unlocked status also is 3.
Edit 1: When a choose "Normal boot" it says: Invalid boot Image Header! Fastboot reason: Fall-Through from recovery boot mode.
When i choose "Recovery" it says: Invalid boot Image Header
boot up failed
When i choose "Factory": The phone just restarts into fastboot again...
Checking Motorola Device Update, the firmware inside this phone is: 21.11.17.titan.retuaws.retuaws.en.us what it means, it have android 5.0.2 Lollipop, right?
Hope you can help me
Thanks.

Remote: Oem unlock is not allowed

My one plus 3t no longer boots to the home screen. Just got stuck in the one plus logo then goes black screen. Tried resetting and all but no luck. I enter recovery mode and shows device state - locked. Tried unlocking bootloader using different tools but got error "remote " oem unlock is not allowed" . I need help.
You should use the usual qualcomm emergency recovery option found in this forum.

Help: I can't access the bootloader on Z3c

Dear XDA users,
I want to unlock my (GFs) Z3c and I am unable to access the bootloader.
Starting the phone with Power + VolDown does not do anything, as long as the VolDown is being held, the screen stays black. When powering up the phone with Power and hit VolDown right after that, there is a loop where the phone shows the Sony logo and turns black each ~15 seconds.
Executing "adb reboot bootloader" shuts off the phone (the LED shows blue after that).
The device is a refurbished one with branding from "Telekom Germany" that we got as a replacement from our phone insurance after dropping the first one.
Is it possible that the bootloader is hidden somehow or missing/faulty?
What can I do?
I have working Flashtool and ADB on Win10 Pro (with disabled driver signature checks).
die_braut said:
Dear XDA users,
I want to unlock my (GFs) Z3c and I am unable to access the bootloader.
Starting the phone with Power + VolDown does not do anything, as long as the VolDown is being held, the screen stays black. When powering up the phone with Power and hit VolDown right after that, there is a loop where the phone shows the Sony logo and turns black each ~15 seconds.
Executing "adb reboot bootloader" shuts off the phone (the LED shows blue after that).
The device is a refurbished one with branding from "Telekom Germany" that we got as a replacement from our phone insurance after dropping the first one.
Is it possible that the bootloader is hidden somehow or missing/faulty?
What can I do?
I have working Flashtool and ADB on Win10 Pro (with disabled driver signature checks).
Click to expand...
Click to collapse
1. Check if bootloader unlock allowed = yes, (open dialer, enter *#*#7378423#*#* and go to service info-configuration).
2. If yes, unlock bootloader - https://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader (backup ta if you want - https://forum.xda-developers.com/cr...versal-dirtycow-based-ta-backup-t3514236/amp/)
3. Flash recovery: install official TWRP app, select recovery for Z3c, download and flash on computer with terminal command 'fastboot flash recovery'.
I confirm the same issue as OP. I've downloaded the respective firmware and have confirmed via the service page that the bootloader is unlocked.
Now I'm trying to boot into fastboot via "adb reboot bootloader" and my phone looks like it turns off (no notification lights). When I type "adb devices" and "fastboot devices" both are blank ("adb devices" could find the device prior to the reboot command).
I also tried the Sony instructions and pressing Vol Up + Plugging in USB and this also has the same result as above. Not sure what to do next.
Update: I'm using Windows 10 and the problem was that it would not install the unsigned drivers that came with Flashtool. Once I rebooted Windows in troubleshooting mode (Shift + Restart) and disabled the signed driver requirement, Flashtool installed correctly. I reflashed the phone for good measure and now following the normal steps fastboot devices picks up the phone.

Bricked leeco le2

Hi guys,
I've a leeco le2, it's in some sort of bootloop. I now have a phone which I hope is not actually bricked.
To cut to the chase:
The phone boot loops - it shows the "Leeco" on the black background for less than a second, then reboots, after 2 seconds, it comes back up with the "Leeco" and reboots, and so on.
I can get into fastboot mode. Interestingly, the status shows "Device is LOCKED"
I cant get to recovery mode. It just goes into the boot loop again.
Using the adb tools, I cant issue the "fastboot flashing unlock" or "fastboot oem unlock" commands because it returns: "FAILED (remote: 'oem unlock is not allowed')"
I am unable to get into the phone OS to change the settings because the phone is boot looping
. I am flashed several time in flashone,qfil and Miracle thunder but problem is same.
Given the fact I am unable to get to recovery, I am unable to sideload an OTA zip. And given the fact that I cant boot into the OS, I cant enable oem unlocking.
Do I have any hope at resurrecting this phone in any way? please help me
Check this : https://forum.xda-developers.com/t/...-le-2-s3-noob-friendly.3515555/#post-69996355

Realme C3 problem after unlock bootloader

I have unlocked bootloader of my Realme C3 using ADB/Fastboot driver
after unlocking Select boot mode screen appears but volume up/down selection does not work
You can say stuck on Select Boot Mode Screen
After pressing Power button the system restarts normally (with warning Orange mode The bootloader is unlocked)
All data erased, need to set-up from start
Tried many time but same problem
Any suggestion please
Rizwan
Knock Knock
Any Suggestion
Same here
Did you install the apk also? FROM hxxxxxps://c.realme[.]com/in/post-details/1244859266402091008
See
hxxxxxps://www.youtube[.]com/watch?v=NPbuucfHH2o

Categories

Resources