I brink my phone trying to remove [email protected] account from it by updating the phone but it didn't success now every time I turn on the phone it goes directly to download mode please I need some help
I try to install a new firmware but it didn't work I also use Odin but it only load until it Half done and it show that it fail plz help me guys
Related
Closed.closed.
What does your boot screen look like?
What did you do with Odin? What did you select, what firmware, etc?
Please HELP me!!!!
I have just bought an SHW-M110S and I tried "3-button combo fix for any firmware version" lastnight. Unfortunately, My phone got bricked after trying this way. Please help me to flash my phone back to my latest M110S firmware:
Baseband version:
M110S.DH09.2134.ST
Build number
ECLAIR.DI03
Thank you so much.
koe1974 said:
What does your boot screen look like?
What did you do with Odin? What did you select, what firmware, etc?
Click to expand...
Click to collapse
i followed one of the steps in this forum, the 3 v1 odin..first is to tick retick repartition then pit xxx512 something like that then it recognize my device..then the "PASS" then i disconnect after that my boot screen changed.or download mode screen?...my boot screen before Samsung Anycall Galaxy S, download mode screen is Written in korean but with English UPgrade..is that it?...then now..its Samsung Anycall..with 3 color box at the right with talk, love, play written on the box..HELP.
kirkmaglaya said:
i followed one of the steps in this forum, the 3 v1 odin..first is to tick retick repartition then pit xxx512 something like that then it recognize my device..then the "PASS" then i disconnect after that my boot screen changed.or download mode screen?...my boot screen before Samsung Anycall Galaxy S, download mode screen is Written in korean but with English UPgrade..is that it?...then now..its Samsung Anycall..with 3 color box at the right with talk, love, play written on the box..HELP.
Click to expand...
Click to collapse
Keep reading the thread. There is chinese firmware that will get your phone back to working condition so it can be flashed again with kies. Your bootloader has been overwritten and the only way to fix that, as far as I know, is to bring it to Samsung for after service.
koe1974 said:
Keep reading the thread. There is chinese firmware that will get your phone back to working condition so it can be flashed again with kies. Your bootloader has been overwritten and the only way to fix that, as far as I know, is to bring it to Samsung for after service.
Click to expand...
Click to collapse
is there any way that i can change this to US or international rom?...because korean rom has no swype and 80chars txt..
Nope i dont think you can unless someone patches the operator restrictions
hi there im new here and i know a little about flashing but i had managed to upgrade via samsung kies my anycall galaxy s M-110S. i thought its easy to upgrade via kies than odin. but now im having problem with 1. i opened kies and connect my friends galaxy s M-110S (korean) and kies said update available. i clicked to upgrade but its stuck. kies asked me to unplug the usb and remove battery and then connect again. i did so. but my kies keep searching the device though in device manager shows samsung modem connected. the phone shows "upgrade" in english and some words in korean is likely may be -upgrade did not finished. do it again (i know korean a little). so i need help from the masters. i badly need it to be ok. plz help me out
---------- Post added at 01:08 AM ---------- Previous post was at 12:37 AM ----------
koe1974 said:
Keep reading the thread. There is chinese firmware that will get your phone back to working condition so it can be flashed again with kies. Your bootloader has been overwritten and the only way to fix that, as far as I know, is to bring it to Samsung for after service.
Click to expand...
Click to collapse
i just want to get my phone back. plz give me the link of that chinese firmware or any additional information? plz need help. btw im new so guide me to the solution of that anycall galaxy s M-110s (korean). it failed when i tried to upgrade via kies. now its only in shows "upgrade" in boot screen.
thanks
Thread CLOSED!
please help..
My phone always restart when i tried to rooted odin to wc13 rooting kernel.tar ( PLEASE HELP MEEEE T_T
i stucking my phone in Downloading T_T plss help us
i cant upgrade my samsung galaxy s anycall but i use odin is not working after not working is stuck T_T plss help meeeeeeeeeeeeeee
i have samsung galaxy s anycall phone. it's battery low quickly because always light on off. what can i do
Hi guys, please help me I've tried changing ROM of my newly bought Galaxy S Anycall (SCH-I909) Version following the instructions on this thread. In Odin, it just keeps on getting FAILED> and afterwards, phone won't start up anymore. Just completely black but can still go to DOWNLOAD mode. Can still be detected by Odin. I am not sure which firmware will work on this one. Please enlighten me and help me out on this. I feel so down, can't go to sleep because of this. : (
(This is a china anycall samsung version)
Cezlec_06 said:
Hi guys, please help me I've tried changing ROM of my newly bought Galaxy S Anycall (SCH-I909) Version following the instructions on this thread. In Odin, it just keeps on getting FAILED> and afterwards, phone won't start up anymore. Just completely black but can still go to DOWNLOAD mode. Can still be detected by Odin. I am not sure which firmware will work on this one. Please enlighten me and help me out on this. I feel so down, can't go to sleep because of this. : (
(This is a china anycall samsung version)
Click to expand...
Click to collapse
I know this is a long shot but....did you ever figure this out?
hey guys, i had a galaxy s that i had flashed android 2.3.5 on to, i used odin to flash the same rom on to the phone when i sold it a short while back, the current owner says it doesnt want to turn on wifi. the current owner said it begins to turn on in the phone and then shuts right off. the only idea i have is to reflash odin to the phone again, but the problem is i dont have the phone anymore and i cant find the tutorial for the process or the required files. any help would be great. thanks guys
nevermind i think i may have found what i need here
http://forum.xda-developers.com/showthread.php?t=1350266
Hi there
I just want to share my bad experience about bricking my s3mini. I had the fantastic idea of installing the wrong baseband version in. It did what I believe a soft-brick . My phone was constantly rebooting showing only the Samsung logo screen with model number. I did try to recover my phone using Odin but It fail all the time. May Be I have not used the right md5 file with Odin, anyway. Didn't work so Trying and trying I have ended using the samsung official Kies software and my mS3 is back to live. How ?
In Keis:
Tools--->firmware upgrade and initialisation--> and the follow the instruction on the screen of Keis.
Hope It will be helpful for someone else.
Sorry about my English
So I went to null ROM, and decided I'd just go all the way to Tizen. Downloaded the latest tizen and flashed in Odin, which failed.
Then I found the thread to downgrade back to Android, so I did step 1, but now I can't get into recovery. When I try to get into recover, it just sits there bootlooping on the "Galaxy Gear" splash page.
All I can successfully do at the moment is get into Download Mode still, trying to fully boot also just ends up sittings there at the glowing "Samsung" logo.
seth50k said:
So I went to null ROM, and decided I'd just go all the way to Tizen. Downloaded the latest tizen and flashed in Odin, which failed.
Then I found the thread to downgrade back to Android, so I did step 1, but now I can't get into recovery. When I try to get into recover, it just sits there bootlooping on the "Galaxy Gear" splash page.
All I can successfully do at the moment is get into Download Mode still, trying to fully boot also just ends up sittings there at the glowing "Samsung" logo.
Click to expand...
Click to collapse
Figured it out, this thread fixed: http://forum.xda-developers.com/galaxy-gear/help/how-to-properly-flash-tizenmod-t2886991
How to unbrick galaxy gear !
Hello friend.. ( u can try this method to unbrick your GG )
Previously im also got the same problem as u when im trying to upgrade my GG1 but after a long search i found this link . What u need is just follow the instructions as given and the important things is dont try to skip anything !
How to UnBrick Galaxy Gear: h*t*t*p://youtube/fS4878klPAQ
( delete * from h t t p coz im not allowed to post link yet )
I hope this will help u coz my GG1 has been recover back .. not to original stock rom but it also upgrade my GG1 to TIZEN !!! :good:
And dont forget to thanks to that guys that send the video and me ( coz i need a credit to post another reply to whom that need a help ) and good luck to u all.
AND TO ADMIN : PLEASE DO NOT BANNED ME COZ IM JUST TRY TO HELP SOMEBODY THAT HAS THE SAME PROBLEM WITH ME .... PEACE !