Usb host mode - One (M7) Q&A, Help & Troubleshooting

Have done a search,but can't seem to really find an answer...
Anyone have any idea how to get my old M7 out of usb host mode?
Tried all the known tricks to no avail...
Edit:M7 can sense an OTG cable & usb thumb drive(16gb Sandisk),mounts properly and can see photos on it.Unmounts fine.
M7 also seems to mount(kind of),to my laptop,but it mounts and unmounts nonstop,tried a few difderent cables but still the same issue.All i did was update the Car app,and disable it.
Phone still needs to be tyrned off for charging,and it mounts and unmounts from the charger nonstop
Sent from my HTC_0PJA10 using Tapatalk

Anyone?Surely i cant be the only person with this issue?
Sent from my HTC_0PJA10 using Tapatalk

TornadoF6 said:
Have done a search,but can't seem to really find an answer...
Anyone have any idea how to get my old M7 out of usb host mode?
Tried all the known tricks to no avail...
Edit:M7 can sense an OTG cable & usb thumb drive(16gb Sandisk),mounts properly and can see photos on it.Unmounts fine.
M7 also seems to mount(kind of),to my laptop,but it mounts and unmounts nonstop,tried a few difderent cables but still the same issue.All i did was update the Car app,and disable it.
Phone still needs to be tyrned off for charging,and it mounts and unmounts from the charger nonstop
Sent from my HTC_0PJA10 using Tapatalk
Click to expand...
Click to collapse
Sometimes its caused by a defective usb port on the phone. The ID pin is shorted causing the usb host mode always active. The usb port can be replaced, its on a small board with the front mic, connected to the main board with a flex cable.

Related

How to Enable usb - on the go?

please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave

USB OTG on stock rom issue.

Bought 2 USB OTG cable a few days ago but I've been unable to get it work. The moment I plug it into my HTC One, a "Unable to charge device. Please use the supported charger" error. 2 different USB OTG cables, same error. Bought at different times after I couldnt get the first cable to work.
I'm having the exact same issue... I have 2 cables which both work with my Nexus 7 without any problems what's so ever. Does anyone know if there is an "official" cable from HTC or is there some kind cable standard which has to be adhered to, so it works?
I just got a cheap usb otg cable from eBay, works fine for me. What size drives are you trying to mount?
Sent from my HTC One using xda app-developers app
townay said:
Bought 2 USB OTG cable a few days ago but I've been unable to get it work. The moment I plug it into my HTC One, a "Unable to charge device. Please use the supported charger" error. 2 different USB OTG cables, same error. Bought at different times after I couldnt get the first cable to work.
Click to expand...
Click to collapse
The Stock Kernel doesnt support NTFS or ExFat... u have to format to FAT32 to get otg to work...
Maybe there will be a kernel with ntfs or exfat support someday...
spikeydoo2006 said:
I just got a cheap usb otg cable from eBay, works fine for me. What size drives are you trying to mount?
Click to expand...
Click to collapse
8gb pen drives.
BlaSulz said:
The Stock Kernel doesnt support NTFS or ExFat... u have to format to FAT32 to get otg to work...
Maybe there will be a kernel with ntfs or exfat support someday...
Click to expand...
Click to collapse
I've formatted the usb drive to fat32 as well
Sent from my HTC One 801e using xda app-developers app
I get that message also but it still works. Attached a mouse and it worked great.
Sent from my HTC One using xda app-developers app
I'm trying a 32gb Fat32 and NTFS, still no joy....
Ive had no problem with mine? im using a 4gb stick, but ive been using the stick mount app (requires root)
townay said:
8gb pen drives.
I've formatted the usb drive to fat32 as well
Sent from my HTC One 801e using xda app-developers app
Click to expand...
Click to collapse
There can be problem with your pen drive. Cause i had lived the same problem. My sd card works in pc but not in phone. I tried using my mouse or another disc with OTG cable and they worked.
The stock HTC kernel has a whitelist that module blocks OTG access when a certain limit is reached like required voltage by the accessory in order to work. Custom kernel now has this disabled so you might want to check that if you want. But if you prefer stock kernel I suggest you guys look for low powered USB drives instead. Cable alone won't have any issues at all with compatibility.
The main issues are the filesystem type & the electrical current required by the USB drive or any device you want to use for OTG.
The charger notification is a bug and might get fixed soon by HTC but it won't have any effects on OTG itself. It's just the kernel mistakenly identify the OTG device as a charging mechanism.
one from amazon, and 2 from ebay, worked great on my HTC ONE S... and samsung galaxy s3, on my HTC ONE, the freeze up, lock up, i dont even try it anymore.
yeh, i also get the charging thing error...
i believe the one i bought also said for google nexus... i use 32gb...
How does that 4gb stick work is that like a usb flash drive you can use with the One?
rsktkr1 said:
How does that 4gb stick work is that like a usb flash drive you can use with the One?
Click to expand...
Click to collapse
an OTG Cable and an USB SDCard reader.
did you try to view it using any explorer? everytime i plug in my usb otg, i always get error notif. but it shows up on my explorer anyway and i can access it
SkizzMcNizz said:
I get that message also but it still works. Attached a mouse and it worked great.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I also get this message with my usb otg cable when connecting external usb dac , but the device works ok.
I have found usb host diagnostic app to be useful, it is free from play store
https://play.google.com/store/apps/details?id=eu.chainfire.usbhostdiagnostics
Sent from my HTC One using xda app-developers app
Ok, so what about charging phone while connecting something by otg? Is it works on non-stock kernels?
Riyal said:
The stock HTC kernel has a whitelist that module blocks OTG access when a certain limit is reached like required voltage by the accessory in order to work. Custom kernel now has this disabled so you might want to check that if you want. But if you prefer stock kernel I suggest you guys look for low powered USB drives instead. Cable alone won't have any issues at all with compatibility.
The main issues are the filesystem type & the electrical current required by the USB drive or any device you want to use for OTG.
The charger notification is a bug and might get fixed soon by HTC but it won't have any effects on OTG itself. It's just the kernel mistakenly identify the OTG device as a charging mechanism.
Click to expand...
Click to collapse
Without any usb thumbdrives attached to the otg cable, the moment I connect the otg to my One, the error pops up. Later connecting the thumb drive to the cable does nothing. Es file explorer does not detect nor does mount usb drive light up (remains greyed out).
Tried connecting the usb drive first and then connecting both to my phone and does detect either. So yeah, I guess might have to buy another usb drive ?
i had the same problem, but....
I was very dissapointed because my htc one could not find the otg usb! I started deleting almost all downloaded software from my device and cleared cash! Then restarted my phone and... Voila! It works! To be honest, i didn't find out the problem, but it works!

USB Port

Does the USB port have any other function other than power?
Don't think so, only power AFAIK.
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
UPDATE: The USB cable that comes with it may not work for data transfer, tried it with my phone and it didn't work. So I tried a normal microUSB cable but still nothing.
spunker88 said:
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
Click to expand...
Click to collapse
If we could plug a mouse or keyboard into it would be great!!
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
It has bluetooth... so in theory that could be a simple alternative... we just need to figure out how to access hidden menus.
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Universal Charger
Universal Charger:victory:
Examining board
Based on examining the photos of the motherboard on ifixit.com...
Component EM1 appears to be a USB Common Mode Choke. That goes on the D+/D- pair which you can see routed from the USB port, so it wouldn't be present if there wasn't some use for data communication over the USB port. (Cost sensitive equipment.) The flip side of the PCBA shows TP1-TP20 (Where TP19 and TP20 appear to be GND). My guess is in that mix you have a JTAG port for programming/testing the unit initially with a pogo pin rig (evidenced by the dimples observed in each of those locations), and there might be more high/low GPIO pins where one might allow the unit to enter its USB data mode.
-Jon
ften said:
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Click to expand...
Click to collapse
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
mustang_52 said:
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
OneAn9ryN00b said:
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
Click to expand...
Click to collapse
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
Click to expand...
Click to collapse
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
spunker88 said:
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
Click to expand...
Click to collapse
I ordered this cable http://r.ebay.com/QgwBIW Will report back if it works when I get it.
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
Click to expand...
Click to collapse
I also bought that powered OTG cable off Amazon and it will power the Chromecast as well as provide the means to flash the Chromecast via a USB thumbdrive. When you apply power to the Chromecast, it automatically flashed the bin from the USB drive. There was no interaction required (or even possible). Of course this was on the original firmware - if your Chromecast updated itself, you have lost the ability to root the device at this time.
Clearly the Chromecast does sense the USB drive and pulls data from it during the initial boot sequence. However I'm not sure if it would ever work for other devices such as keyboards or storage devices, etc.
I'm not sure why anyone would want to hook those types of devices up to the Chromecast however. Once you have root, you can telnet into the device, so adding a keyboard doesn't seem that important. The whole idea of the device is that you send it media from other devices and control it via that other device. Adding storage for example doesn't seem important since it can pull media off the network already (ie a NAS or another computer).
Anyway. That has been my experience with it so far. It's a long winded answer to more than just your question about the OTG plug.
I would personally love the ability to send audio out without having an hdmi TV be on through the usb somehow...
Sent from my Nexus 7 using Tapatalk 4
USB Tethering not working - SGH-i997
Hi all,
i have install Avatar 7.0 to my Samsung SGH-i997 from "http://forum.xda-developers.com/showthread.php?t=2174227". it's look cool.
But when i am trying to USB Tethering, the massage shows as "Unfortunately,Setting has Stopped".
how to Fix this issue.

[Q] USB Audio (car usb connector)

I've been searching for a while to solve this.
I'd like to connect my HTC one to my car usb connector.
I've seen several repoirts claiming usb audio works, connecting dac's etcetra.
I know I can connect usb drives with a micro-usb to usb connector, tried it and this works.
But I have also seen people saying you need an USB OTG cable for this, so what is it?
I've already connected my One via the micros-usb to usb cable to my car but I do net get audio via the usb on my car equipment.
So again the question, is audio out available on the htc one (and on other android phones) with the stock rom.
Some of the report where talking about CM roms, I do use the elegancia one but I have no intent of switching to CM.
deboopi2 said:
I've been searching for a while to solve this.
I'd like to connect my HTC one to my car usb connector.
I've seen several repoirts claiming usb audio works, connecting dac's etcetra.
I know I can connect usb drives with a micro-usb to usb connector, tried it and this works.
But I have also seen people saying you need an USB OTG cable for this, so what is it?
I've already connected my One via the micros-usb to usb cable to my car but I do net get audio via the usb on my car equipment.
So again the question, is audio out available on the htc one (and on other android phones) with the stock rom.
Some of the report where talking about CM roms, I do use the elegancia one but I have no intent of switching to CM.
Click to expand...
Click to collapse
since the HTC One does not automaticly plug as mass storage i guess that the car radio simply does not recognize the phone as a mass storage with music.. an USB OTG cable would "fix" it since it will force the phone to be shown as mass storage.. (its a guessing anyway)
And you have guessed correctly. The USB otg cable works fine.....except it added ringtones et al when you select root folder. Worked ok if I navigated to the music folder (assuming your vehicle has that option).
Sent from my HTC One using Tapatalk 4
jmitr said:
And you have guessed correctly. The USB otg cable works fine.....except it added ringtones et al when you select root folder. Worked ok if I navigated to the music folder (assuming your vehicle has that option).
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Well, for me it does not work.
As I said before I can attach a USB drive to my phone and I can accomplish this by using a micro-usb to usb adapter.
When attaching the drive my phone complains it cannot charge and that I need the standard charger.
But when using a file explorer I can see (read and write) the contents of my usb drive in the storage/usb folder.
I thought this was enough to decide that the converter was OTG but now I'm not so certain about this anymore.
Is every usb to micro usb an OTG or what are the extra requirements?
Anyway I tried again to connect to my car audio and the message I got on the car was
that he could not charge the phone but the phone was as well not recognized as media input.
Because OTG adapters are very cheap I ordered one which explicitly says it is OTG,
I'll see what happens when I can try that one out but in the meantime all comments are welcome.
deboopi2 said:
Well, for me it does not work.
As I said before I can attach a USB drive to my phone and I can accomplish this by using a micro-usb to usb adapter.
When attaching the drive my phone complains it cannot charge and that I need the standard charger.
But when using a file explorer I can see (read and write) the contents of my usb drive in the storage/usb folder.
I thought this was enough to decide that the converter was OTG but now I'm not so certain about this anymore.
Is every usb to micro usb an OTG or what are the extra requirements?
Anyway I tried again to connect to my car audio and the message I got on the car was
that he could not charge the phone but the phone was as well not recognized as media input.
Because OTG adapters are very cheap I ordered one which explicitly says it is OTG,
I'll see what happens when I can try that one out but in the meantime all comments are welcome.
Click to expand...
Click to collapse
Yes, the cable I had explicitly said "OTG".
I only experimented with this for fun, my Elantra also supports built in bluetooth (phone controls are on the steering wheel, mic in the roof) so I mainly put my One in my car kit, launch car mode and away I go.
The OTG cable worked well for me when I tried it though. It did NOT work with my Son's Nexus 4 so these things can be finicky.

V40 USB issue

The problem just started.
What works:
1. Low speed charging
2. Access to OTG memory card
Not Working:
1. Connecting to PC. Unknown USB Device (Device Descriptor Request Failed) The PC has the correct LG driver.
2. Fast Charging
3. Android Auto USB mode. Phone won't negotiate with the car.
I have cleaned the USB port with electronic cleaner and sand paper. It made no difference. The port wasn't dirty to start with. I have not done factory reset since the problem looks more likely to be hardware.
Any suggestion?
Cord gone bad?
Sent from my LM-V405 using Tapatalk
Einsteindks said:
Cord gone bad?
Sent from my LM-V405 using Tapatalk
Click to expand...
Click to collapse
Not the cord. Already tried several. The cords work fine in fast-charge mode and Android auto with other phones.
abuchison said:
The problem just started.
Not Working:
1. Connecting to PC. Unknown USB Device (Device Descriptor Request Failed) The PC has the correct LG driver.
Any suggestion?
Click to expand...
Click to collapse
So, has this device connected to the mentioned PC before? If so, and nothing has changed (like driver update etc), then, sorry to say, but it absolutely sounds like the usb port is an issue.
Even if out of warranty, I'd plead my case to LG. That shouldn't happen. Has it gotten wet? Is any part loose in there?
good luck
I also have a USB problem, but mine keeps asking what I want to use the USB connection for i.e. charging, power supply, file transfer, photo transfer or MIDI device. And the wireless charging doesn't work either.
abuchison said:
The problem just started.
What works:
1. Low speed charging
2. Access to OTG memory card
Not Working:
1. Connecting to PC. Unknown USB Device (Device Descriptor Request Failed) The PC has the correct LG driver.
2. Fast Charging
3. Android Auto USB mode. Phone won't negotiate with the car.
I have cleaned the USB port with electronic cleaner and sand paper. It made no difference. The port wasn't dirty to start with. I have not done factory reset since the problem looks more likely to be hardware.
Any suggestion?
Click to expand...
Click to collapse
I got the same problem, I tried to work around the USB port and it fixed itself. Probably got some dust in the port. Try to tug the cable a bit and reconnect. Or you can try different cable.

Categories

Resources