Database Develop

extended battery hard case from seidio

just saw this on ppcgeeks thought I'd post it here for anyone looking. It's "coming soon" but not sure about ETA:
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=993

So its ONLY 2 months late from when they said it would be out. But just the same, good to see it is ALMOST out.

now Shipping! Woot!

Too bad it would cost me 100 bucks for the package. 70 for the extended battery, and another 35 for the case. Not sure I could justify dropping that for my cell phone.

Has anyone tried any of the batteries from Seidio. They are offering an extended battery of 3200 MAH. I don't want to try one of these if there is a chance of frying my 6800.
Link to Seidio 3200MAH battery

huh?
mr.ellsworth said:
Has anyone tried any of the batteries from Seidio. They are offering an extended battery of 3200 MAH. I don't want to try one of these if there is a chance of frying my 6800.
Link to Seidio 3200MAH battery
Click to expand...
Click to collapse
So, let me see if I understand your question, in a forum post about the extended hard case for the seidio battery, you wonder if anyone has tried any of the batteries?
Why would any of us be discussing the hard case for the SEIDIO extended battery if we didn't already have the battery to get the hard case for????
Do you imagine we're all going to buy the hard case for the extended battery and use it with the stock battery?

I have the Seidio Battery...
It will not FRY your phone!

sanjsrik said:
So, let me see if I understand your question, in a forum post about the extended hard case for the seidio battery, you wonder if anyone has tried any of the batteries?
Why would any of us be discussing the hard case for the SEIDIO extended battery if we didn't already have the battery to get the hard case for????
Do you imagine we're all going to buy the hard case for the extended battery and use it with the stock battery?
Click to expand...
Click to collapse
Well let’s see!
Maybe because it is nothing more than a hard case.
or
Because there is no requirement stating that one must have the SEIDIO extended battery to use the SEIDIO hard case.
or
Maybe I just thought that because it was apparent that some of the viewers in this thread may have some knowledge about extended batteries and since I have heard about aftermarket batteries/accessories that have caused problems in the past thereby voiding the warranty and the fact that to replace this phone would be pricey it might just be a good idea to ask those with experience in the extended battery arena about the integrity of the product before I purchase.
I don't want a $579.00 (retail replacement) iron on my hands!
mr.ellsworth

Dude, it's a HARDCASE ONLY FOR THE EXTENDED BATTERY. Why would anyone buy the hardcase for the extended battery IF they didn't have the extended battery in the first place?
If you wanted to use the "slim" hardcase then that would make sense, but this is ONLY for users who have the EXTENDED battery to buy this hard case.

Just nearly a week and a half ago I placed my first order to get a slim rubber case and clip..and the day I saw that the extended case was in I ordered the battery and case..got it today and so far nothing but good results. I've had it on for what seems to be like 7 hours and it shows 80% still remaining...BUT during a good 4 or 5 of those hours i had bluetooth on, wifi on and logged onto windows live messanger..it didn't budge. Its not that much bigger with this battery and with somedays not knowing if i'll be working 8 hours or 14 this helps out alot! It does add a bit of weight to it but i'm willing to give that extra weight and thickness for all that my phone is capable of doing.

mr.ellsworth said:
Well let’s see!
I don't want a $579.00 (retail replacement) iron on my hands!
mr.ellsworth
Click to expand...
Click to collapse
$579.00?? It costs $619.00 to replace at Verizon!!

not worth it, haha
Well, check it out. I'm the kind of person to take care of my junk. I went to my god fathers heart surgery, and that morning in the parking lot i dropped my phone (1st time) cause you know, it's damn slippery. I was juggling other crap in my hands as well. The phone dropped, back cover popped off no problem.
It wasn't until later i noticed that the left msg record button was jammed, i set that button as 'alt+tab.' crap. I tried fixing it, it proved impossible with my methods.
I used my insurance and got a new phone for $50. That was late 2007. Just this past wednesday, about 4-5 months after with this new phone, i dropped it at work from a very low height. What are the odds that the same freaking button broke? Fook it, right? I can learn to live with it. But i still want the case. Even if you got this phone for $200, a $40 investment to protect it is worth it. I am a power user running 10 emails through flexmail at all times, amongst other things such as my exchange work email. So i will not only get this case but the extra capacity battery.
If you don't think $40 is worth covering $200, then you probably have problems. If this had been available when i bought the phone, i would have gladly paid $40 over $50 and the hassel i went through setting up the new phone.
thanks for the great find gand!

So after having this setup for nearly a week I am quite pleased. From having last plugged it in on Friday for about a 45 minutes it lasted till sunday afternoon at about 4:30 where it showed 30%. Given i was barely talking on the phone and sent only a dozen or two texts...the standby time still amazed me. I google mapped a few things as well..I definately reccomend this.

Ok so I ordered:
3200MAH SUPER EXTENDED BATTERY FOR PPC 6800 ($64.95 USD)
RUBBERIZED CASE/HOLSTER COMBO FOR EXTENDED XV 6800 / PPC 6800 ($49.95 USD)
It came out to a total of $127.15 (USD)
The battery comes with a cover as shown in the picture, but unlike the picture it says seidio on the back of it, very cool!
The 'rubberized case' with holder is pretty cool. It's not as 'grippy' as i thought it would be, but definitly an improvement over the original finish. I am more confident with it in my hand.
I've begun charging the battery that supposedly has 60% charge according to WM.
I also use my phone quite a bit so i'll be reporting in on whether this battery was worth it or not.
Worth noting is that unlike many others, i had no problems at all installing the battery case cover, nor the rubber covers. Just be patient and look at what you're doing and you should be ok.
So far 100% satisfied, will update in a few weeks.

not wanting the extreme bulk of the 3200 battery, i went ahead and got a 1650 battery instead...BIG MISTAKE, don't get it, I don't notice any battery level change, I went about with my usual business hopefully ending the day with at least 30-40% (I generally start using the phone at 9-10 till maybe 8-9) at night but instead, as usual it dropped to 0 and dies on me. With a case and the battery i forked up 108 bucks- so pay the extra 20 bucks and get the 3200 instead, i regret not doing so!

GhettoBSD said:
Ok so I ordered:
3200MAH SUPER EXTENDED BATTERY FOR PPC 6800 ($64.95 USD)
RUBBERIZED CASE/HOLSTER COMBO FOR EXTENDED XV 6800 / PPC 6800 ($49.95 USD)
It came out to a total of $127.15 (USD)
The battery comes with a cover as shown in the picture, but unlike the picture it says seidio on the back of it, very cool!
The 'rubberized case' with holder is pretty cool. It's not as 'grippy' as i thought it would be, but definitly an improvement over the original finish. I am more confident with it in my hand.
I've begun charging the battery that supposedly has 60% charge according to WM.
I also use my phone quite a bit so i'll be reporting in on whether this battery was worth it or not.
Worth noting is that unlike many others, i had no problems at all installing the battery case cover, nor the rubber covers. Just be patient and look at what you're doing and you should be ok.
So far 100% satisfied, will update in a few weeks.
Click to expand...
Click to collapse
Any update on the battery? Do ppl comment on how big it is often?

1999TL said:
Any update on the battery? Do ppl comment on how big it is often?
Click to expand...
Click to collapse
I use the Mugen 3600mAh battery and Seido hard case; in three months of use, no one has ever commented on the thickness of my phone. It fits (fills) the hand better for a more secure grip. But yes, the Seido "rubberized" case isn't all that grippy, so I recommend plastering it with e-grips appliques.

Seidio extended battery case hardware hack for macro lens and sunshield.
The pictures will show what a sweet hack this is. I'd wanted both a sun shield and a macro lens, and when I got this new battery and the case that came with it I saw the possibilities right away.
First I eyeballed the length and width of the slider that I would need (about 9/16" by 7/16" )
Then I carved a channel the thickness of my slider in the large lower lip.
The opposing channel was constructed from three layers of the same black plastic sheet I used for the slider.
Cleaned out any excess glue from the track, checking it with the slider by hand.
Then I temporarily spot glued the three layer channel to the case with the slider in place to see if I needed to make any adjustments to the width of the slider.
After making adjustments I glued the three layer channel to the case with the slider in place.
Now I was ready to make the hole for my macro lens (You want to make it centered with respect to the camera) I just eyeballed it. Made a small hole with a drill, then with a round needle file made it as concentric with the hole in the case for the camera as I could by hand.
Having stripped numerous machines and devices over the years I had a little selection of small lenses.
I chose a small magnifier of a size a little bit larger than the hole I'd filed in the slider and glued it in place.
When that dried I put the case back on the phone and I moved the slider to the macro position and made sure it was centered correctly. Then a sliver of the same black plastic sheet was carefully glued in the channel as a block to stop the slider at that position.
That was pretty much it. I used 5 minute clear epoxy which allowed me to clean out glue that was in bad places while it was still tacky.
http://filer.case.edu/sxg7/public/po...20shooting.jpg
http://filer.case.edu/sxg7/public/Su...20Position.jpg
http://filer.case.edu/sxg7/public/Macro Position.jpg
http://filer.case.edu/sxg7/public/Without macro.jpg
http://filer.case.edu/sxg7/public/With Macro.jpg

ZeroLemon case review

I received my ZeroLemon battery case for my Samsung Galaxy S6 Edge today, and this is my review.
I will be breaking up this review into 3 parts, initial hands on, first 24 hours, and after 1 week.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Initial hands on:
The case itself is split into 3 parts. The main piece is the battery. The battery itself could be used as a standalone battery backup, similar to those found on many websites. It is then connected to the phone via a micro USB U shaped connector. Both the battery and the phone are then placed in the outer casing which has the cutouts for the LED indicators that are built into the battery itself. You are able to press the power button to see (with 4 LED lights) what the current charge on the external battery pack is at. Holding down this power button turns on and off the charger itself. The cutouts for the IR blaster and noise canceling mic are pretty spot on for position. They both seemed pretty centered. The power button and volume keys have a nice tactile press to them, making them easy to use. I like the fact that the bottom of the case has the speaker grills coming out the front of the device. I found it very hard to try and muffle the sound this way. No longer will my hand placement mute my media. The case also comes with a headphone jack adapter, due to the fact that the port is pretty far buried in the case. So far my only gripe is that on the edges of the case, it doesn't seem as snug as the top and bottom is. There is distinctive bowing of the center. That could, however, be due to the fact that I have a skin on the back of the device, making it just slightly thicker than the original version would be. I won't be able to verify this, as I am not going to try to remove the skin. The case has a good heft to it. It's not too heavy, but it does give a more distinguishable weight to the phone. The way the case curves around the backside really just makes the whole thing fit comfortably in my hand. Also, even with the added bulk, the case still fits comfortably in my pocket. I have tested, and NFC no longer works, which is to be expected at this thickness. My biggest downside with the case is that I cannot connect it to my computer to transfer files without first taking it back out of the case.

After using the case for 24 hours I've come across things I both like and dislike. My phone is currently at a full charge after being off the charger since 9am. My zerolemon case is at half capacity, meaning I should be able to get another full day's use before the case is completely empty and I'm relying on the phone's battery alone. I would say that I have used the device a moderate amount, which is leading me to believe I could get an impressive full 3 day's use before charging again. I have found that while the speaker is protected from being covered by having the media come out of the front, it is now slightly tinny in sound. It isn't horrible, but it's definitely noticeable. I have also found that there are slight defects sound where the case meets the camera, looking like slight nics out of the material.

So I've had the case for 7 days now. I find it especially useful on slow days at work when I'm constantly on my phone. I still haven't dropped the phone, so I don't know how well the case actually stands up to damage. I did have one night where I didn't keep the phone on the charger all night, so the case itself wasn't actually charged. It would be nice if the input charger was higher than the output charge, so the case would charge at the same time as the phone instead of after. This case definitely came in handy when my family went to my grandmother's 90th birthday party an hour away. I was able to watch shows on the way there, as well as take lots of pictures and videos during the party, and still have plenty of battery life for the ride home. Between the bulk and the lack of NFC and wireless charging though, I don't see myself using the case every day. I see myself using this case only during trips and long slow days at work.

It's not the skin. The case doesn't fit snugly around the sides. And at least in my case, it eventually started messing with the screen protector, which is a bit annoying. Between changing ROMs and Kernels I'm able to get a whole day's worth of battery and if I have heavier usage than usual I just find it better to be able to use QiCharging. I used to love my ZeroLemon battery for the Note 3, if they make one similar for the S6 Edge I'll gladly buy it, but as it stands, I don't find it worth losing features over.

I just bought this along with another brand battery case from Amazon today, and they should be here tonight. I'll be curious to see how mine is. I've always been a Mophie guy with my iPhones.

I've received my two cases. This ZeroLemon one, and a Wekin one with a stand. They both fit very well, though I feel the ZeroLemon design to be over complicated, and I have a general distaste for TPU cases. The Wekin one is considerably slimmer. I'll add some more info once I've tested the actual batteries.

One issue I have, that may actually spur me to return this case, is the fact that it doesn't stay charging once the battery in the phone is full. I prefer to follow Mophie's way and use the battery in the pack first when I do use a battery case, which is not every day.

Here goes my review on the case:
Build/Quality - 8/10
Practicality - 9/10
Price - 10/10
Battery Life - 9/10
Build/Quality
At first glance, this case is very generic looking and has no character to it at all. That being said, you slowly start unraveling the fact that there was intricate time put into the attempt of this concept. The case is made of a TPU like material that is rigid, yet flexible. It fits snugly around the phone and hugs the curves to a fault. I'll explain why I say that later. The overall feel in hand is very solid. For someone with big hands and for the type of phone this is, edge variant, there is something to be said about how ergonomic this case makes the S6 edge. Now when I say it hugs to a fault, as you can see in the picture it is a tight fit and lifted my screen protector. I consider myself somewhat of a self proclaimed expert in this realm and could not get it on without disturbing the Liquid IQ Shield screen protector. This is why I dinged it a bit. It isn't as screen protector friendly as I'd hoped. That is probably the biggest downfall. The biggest positive is that the LED indicator lights for the battery pack are extremely useful. I love them and think they make this case/battery pack awesome.
Final Score - 8/10
Practicality
How practical is it to add this kind of bulk to the case and does it make a difference? I found that the case was a great concept, yet it's more brilliant upon closer inspection. What I mean by that is that you may or may not think its worth it, but I'll tell you why I believe it is.
Use cases: Long road trips, traveling (flights), long days at work, forget your charger, appointments (doctors/dentist visits usually consume more battery, crushing those CANDIES!), and other scenarios.
This case offers the protection of a case like an Otterbox or a Life Proof case, but adds the functionality of a Morphie case. However, that's not all it can do. upon closer inspection, you can see that this is a 2 in 1 bundle. Sure you can utilize this as part of the case and carry it on the phone. But this is also a battery pack. Because of this you could essentially charge this battery pack and carry it with you. It's so small it becomes a secondary function of the case. So you are really purchasing 2 items for the price of one. That makes this highly practical because for people that do not want the extra bulk, they have purchased a 2 for 1 and can use it without the case on a day to day basis and drop it in the case when they are on the go.
Final Score - 10/10
Price
That leads me into the price discussion. Is the price worth it? YES! Simply put, yes. An Otterbox case is about $30 - $60, a battery pack is around $20, an extra charger is about $15. If you think about these general figures. The cost of this case for a hybrid battery pack and case is a steal. You are getting a good value for the money (Currently $29.99). I wouldn't hesitate to purchase this at the price point they set.
Final Score - 10/10
Battery Life
Now comes, arguably, the most important part of the review. Does it give you enough juice? I say yes and no. I say yes because any juice is adequate extra juice. I say no because as a power user I always want more. But I think I landed on the fact that this is a stellar case to have for the power it does grant. I was able to extend the phone by half to 1 full day on heavy use. This means that I would be able to give myself an extra charge to give me more power use and finish off the day. On light usage days I could feel comfortable not charging the phone and still getting to the end of the next day. Power use to me entails: emails, app use, web surfing, etc.
I would say that this about doubled my screen on time of 3 - 4 hours to about 6 - 8 hours and increased my general use time from 10 - 14 hours to 20 - 28 hours (excluding stand by time that happens while sleeping, not using at all).
Final Score - 8/10
Conclusion:
I would not hessitate to pick this case up. If you are going on camping trips, if you are going to be away from an outlet, if you are just going to be at the office for a long day or even if you are going to be on business trips or road trips, this case provides ample use cases. That combined with the fact that it can double as a battery pack, makes the cost entirely worth it. I think Zero Lemon could make small improvements to this case by including the option to obtain 2 battery packs instead of one. They could also stand to improve the textures and feel of the case that they include with the battery. Even color variety and customization could liven up the product line. But the fact still remains that it is a solid product and I think it's worth buying.
OVERALL SCORE - 9/10

only think i dont like is it messes my screen protecter up cus it fits so tight

lilmikey201 said:
only think i dont like is it messes my screen protecter up cus it fits so tight
Click to expand...
Click to collapse
Yeah, that's definitely a problem. Another thing that has to be considered is that the bottom of the case sits fairly close to the home button so it would make sense to add a fingerprint profile with the case on to ensure it works with both case off and on.

Zerolemon Case Review
Dislcosure: I received my Zerolemon Case for free in return for posting this review.
So I have had this case for about a month now and a few things really stuck out to me and were the determining factors on whether or not I will be using this as my everyday case.
Packaging/Design - Overall I think the packaging and design are great. The product was well packaged/protected and the case itself is a very nice fit with maybe two minimal flaws. For the way the battery has to be connected and positioned I think the case does a great job of being snug enough to keep the battery in place and protect the phone. I didn't notice any "shifting" of the phone while it was in the case as was a problem with previous/similar Zerolemon cases on my previous phones. That being the case, I did notice after the first time I installed the case that it was so snug it pulled up the screen protector (skin) at the bottom corners of the phone. Luckily with the skin I installed I was able to just press it back down and no harm was done. On future installs I was able to develop a method to putting the case on where it didn't pull up the bottom portion of the screen protector anymore basically eliminating this issue. The other issue though with the case, that has been mentioned in other reviews is that the sides of the case aren't quite as snug as the rest of it and actually bow down and slightly away from the side thus not being quite as snug on the sides as well as causing a bit of a weird "gap push" when trying to press the power or volume buttons. For me it required a little bit more pressure to actually press the buttons which I guess to some can be a positive as it helps avoid accidentally pressing them while in hand or in your pocket.
Functionality - So when I first got the case I was actually headed down to the 24 Hour Disney Day at Walt Disney World. It was perfect timing because this would be a great way to test the performance of the battery and its practicality. By the time we got to the event at 9pm on Friday my phone was at 100% and the case was had 3 of 4 lights lit indicating it was somewhere around 75% capacity (Note: it had not had a full charge/cycle yet, it was right out of the box). By the time we left the park at 7am Saturday morning my phone was at 23% and the case had 1 of 4 lights lit. I was definitely using my phone heavily throughout the event taking tons of photos and video and checking social media mentions of the event. There was however one issue that I haven't been able to replicate but only experienced while the phone was in the case. There was a good bit of time where I couldn't access the phone's video camera because I was getting an "overheating" warning which would grey out the video camera until the phone cooled down to whatever the acceptable temperature is. That was a bit annoying because of course it happened right when I was wanting to take some video of the event. Other times I have used the case I haven't had this issue and overall it has performed as advertised. However, it has it's drawbacks even when performing as advertised. First of which is the loss of NFC. I have actually been able to use Google Wallet fairly regularly around town as many of the merchants that I shop at accept it and it is quite convenient. To all of the sudden not be able to use it seems like a step backwards. The other drawback is the charging rates, both input and output. I mean, HOLY COW, did it seem to take forever just to charge a 3500mAh battery and the phone versus just charging the phone and my external "myCharge" 6000mAh battery. Not to mention it's charging rate back to the phone was around 1-1.5A whereas the myCharge is around 1.8-2.4A. I tend to lean more towards the myCharge because it charges my phone faster and I don't have to be tethered to it or carry the extra bulk with my phone when I don' t necessarily need it.
Conclusion - Overall the case/battery performed as advertised and for the price ($29.99) it is actually a really good deal considering you get a battery and a case. Unfortunately, with the advancements of fast charging and fancier/larger external batteries that can allow you to charge multiple devices at once I see this kind of battery eventually falling by the wayside especially given the loss of certain functions as I and others have mentioned. Would I recommend this case to someone, honestly.....probably not. I would probably recommend an external battery charger with a higher capacity and multiple ports for charging multiple devices that would probably cost $20-$30 more but with a lot more to offer. Suffice it to say, I will most likely not be using the case again.

I received my case yesterday and I have to say I kinda like it like this , yes yes I know takes away the premium build etc but a premium build is useless if the phone is out of charge . It's not as bulky as I thought it would be .
The weight makes the phone feel like its secure in your hand versus the really light slippery feel an S6 has .
Doesn't take long to charge and I can also use this pack to charge other devices . I havent tried wireless charging yet .
All in all for the price , its a boss deal
I'll give it a 10/10
GALAXY S6

ZeroLemon Battery Case

Hello all! Welcome to my ZeroLemon battery case review. As with some of the other people here, I received this case at no cost to provide an honest review. I'll break my review down to make things simpler.
Design:
The case itself is pretty well designed. It gives a good feel to the phone and makes me sure that I will not drop it. My phone used to slide down my hand but now it sticks pretty well. The buttons also work well through the case. I did notice that the speaker ports tend to distort the sound at higher volumes. It is not terrible, but is noticeable. The protection the case provides is also pretty great. I actually dropped my phone from about 3 ft on accident and it held up great!
Use:
The case comes in 3 pieces: battery, U-connector and protective case. You plug you phone into the u connector and then into the battery. Then, you stick your phone and battery into the case. I will usually turn on the battery at about 40% and it charges all the way to 100%. The battery will still have about 50% left so I can do this one more time before it is depleted. It is a WONDERFUL relief to battery anxiety. I have used the case for a few weeks now and the battery is still going strong. No issues at all.
So there are some PROs and CONs to the case.
PRO:
BATTERY LIFE IS AWESOME!
Sturdy construction
Great protection
Good feel/texture
CON:
Can be a bit bulky
Prevects wireless charging capabilities
Prevents NFC capabilities
The USB charging is for power only, it does not allow for data pass through
Overall, this is a great case. It takes a little getting used to, but once you are you can go a long while without worrying about battery life and it is a great relief. If you don't use wireless charging or NFC, this is a great choice!!
Feel free to ask any questions and I will gladly answer.

Thank you and may I ask for pictures? You said adds bulk. How does it feels in hand?

Yes sir. I'll add some pictures tonight. It makes the back if the phone about another 1.2 phone thickness. It's pretty hefty but makes the phone feel solid. When I take it out of the case now it feels TINY lol
Sent from my SM-G925V using XDA Free mobile app

[Review] ZeroLemon 3500mah Battery Case

I've been using this ZeroLemon battery case on and off for my Galaxy S6 Edge in the past couple of months since May and I have to say that I like it a lot!! I've been a fan of ZeroLemon since 2013 when I began using their products for my Galaxy S4 (3000mah & 7500mah batteries) and this product has lived up to my expectations.
This product consists of 3 main parts - the 3500mah extra battery, a little bridge connector that connects the 3500mah battery to the micro USB port on the bottom of the phone, and a TPU case. Here is a picture of what they look like:
It is very simple and easy to put together the package. You first connect one side of the little bridge connector to your phone and connect the other side of the bridge connector to the battery. You then insert the phone and the battery together into the TPU case.
Once everything has been put together, it looks like this:
Putting on the battery case makes the package as tall as a Galaxy Note 4 and about double the Note 4's thickness.
I expected the phone to become super heavy but I was pleasantly surprised that it wasn't too bad. My old Galaxy S4 with its 7500mah extended battery was heavy. This 3500mah ZL battery case is not bad at all. Despite the tallness and thickness, I am still able to use the phone easily with one hand, which is very important for me. The phone is still comfortable to hold and use.
One thing that struck me was the improvement in the quality of the TPU case ZeroLemon used for this product compared to its older TPU products. The feel is way better as the TPU material is now more solid-feeling with a nice texture to it. The older ZL TPU case material felt spongy and cheap in comparison. Kudos to ZL for improving their TPU case material and quality.
Fitment of the TPU case is very good as well. There are no glaring gaps anywhere and the phone is secured snugly with no nervous looseness or movements.
The main star of this kit, of course, is that extra 3500mah battery and it performs very well. My wife and I went far away from home yesterday to do some outlet shopping and I knew I would probably run out of juice during the trip with all the GPS & data usage. About the middle of the day, my phone battery was down to about 30%. So I activated the ZL 3500mah battery by holding down the Power Button on the back of the case and the phone began charging itself right away. About 1 & 15 mins later, the phone was fully charged back to 100%. Nice~! To turn off the charging function, I pressed down on the Power Button again. Very simple.
There are 4 indicators on the back of the case that lets you know how much charge you have left in the 3500mah battery. After that charging session from 30% to 100%, I had 2 bars left which was what I had expected.
So how do you charge the ZL battery pack? You connect your phone charger cable to the microUSB charging receptacle on the lower-left side of the battery case. I noticed that the ZL 3500mah battery gets charged first, followed by the internal OEM battery. After plugging the charger in at night and looking at the phone in the morning, both the ZL battery & OEM battery were fully charged to 100%.
To sum things up, I'm very happy with this ZeroLemon battery case. It is easy to set up, easy to hold and use, and the important battery extension capability just works as advertised.
++ Pros ++
-3500mah backup battery capacity!!
-Easy setup and comfortable to use.
-Good quality TPU case.
-Battery charges fast for not being a FastCharge type.
-The raised lip of the TPU case allows the phone to be placed face-down.
-The case routes the sound to the front so the phone with the case on becomes front-facing rather than down-facing.
++ Cons ++
-A bit difficult to slide the phone inside the case if you have a screen protector on the phone and don't want it to get wrinkled up. It's possible to not mess up the screen protector but takes some effort.
-At maximum volume level, the audio sounds a bit hollowed out and distorted. If one lowers the volume a couple notches, distortion goes away but still not as clear-sounding as having no case on.
I would definitely recommend this battery case to any S6 Edge user who doesn't mind the extra bulk of the case, doesn't want to carry around a power bank, and want some peace of mind knowing that their Edge will easily last the whole day and more. :good: ​

I've heard about Zerolemon that their batteries are powerful. Maybe I'll give it a shot.

ZeroLemon Note 8 10,000mah battery case combo

First off, let me say this is a great setup for a power user and is the third ZeroLemon 10000mah battery case I have used on a mobile device. I use my phone for everyday business and multimedia use around 12-13 hours a day. I am constantly in the car or traveling for clients and have very little time to actively charge my phone on the move. This battery case combo was a no brainer for me.
So far I have been through 5 complete charge/drain cycles. Charging this battery case usually takes 8-10+ hours and holds a charge pretty well from what I have tested throughout the week.
The overall size and feel is great, although it does take a beautiful thin phone and make it into a hefty brick. I would say it is relatively the same size as 3 Note 8 phones stacked on top of each other. For me, this feels great and gives me a bit more piece of mind when handling the phone all day. However, your basic consumer may not like trade-off. That though, is a positive trade-off for me to have stellar battery and usability to get me through the day, worry free.
The case fits the phone very well and I do not worry about it coming loose, shifting etc...If I were to drop it I don't know how well it would absorb the impact, or whether the phone would stay in the case itsself. I'm not going to test that though. The s-pen can be a bit difficult to get out/in. This isn't an issue for me as I rarely use this feature. All the buttons line up with the respective case buttons and pluggin in the charger has ample clearances etc. The camera and fingerprint sensor are easily reachable as well.
Overall, this was a great purchase and one I will make again for future devices. It does exactly what I need it to do every day, and it does it very well.
https://www.amazon.com/gp/product/B00AIQ1ZS2/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Have a link to that?

ycats said:
Have a link to that?
Click to expand...
Click to collapse
Here you go. https://www.amazon.com/gp/product/B00AIQ1ZS2/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I don't think anyone could have designed an uglier solution

Way too much bulk to add considering how long the battery last and how fast the Note 8 charges. I have an external battery, but have only used it once

I bought the 10000 mah lemon battery as well via pre-order being I was coming off a rooted Note 3. Once I seen they was making a 10000 mah lemon I went and bought the Note 8 immediately. Not only have I've gotten 3-4 days with moderate use but it can also be used as an EXTERNAL battery for anyone worried about the added bulk or having to take a more protective designed case off to use the lemon case and battery.
I haven't even seen this option advertised in the Amazon reviews, Zero Lemon website or anywhere so decided to share. Basically just buy any USB C to USB C cable like this but shorter if you want "AmazonBasics USB Type-C to USB Type-C 2.0 Cable - 6 Feet (1.8 M... https://www.amazon.com/dp/B01GGKZ1VA/ref=cm_sw_r_sms_awdo_t1_icXvAb4CR5EGC and plug it in the actual white and black battery that fits in the lemon case. There's a input and output insert. Use the Input slot and plug the other end into the Note 8.
This works just like an external battery where you get the option to have it in the case or out the case. Also to add. When flat on a table, the lip for the case slightly raises the phone off flat surface which helps with the glass not touching. Although it's not designed to protect the phone I dropped mines twice off a dresser and not a scratch. Landed on its back possibly because of the weight. Hope this helps anyone in deciding.