Related
So I updated the MIUI on my Cappy from whatever I had before to 2.3.30 that is GB 2.3.7 from this location:
http://miuiandroid.com/community/threads/archived-miui-versions-captivate-gb.16558/
I didnt care for it so I downloaded SlimICS. I downloaded the base and the cappy essentials. Put them both on my internal sd. I factory reset, wiped data, cache and system and dalvic, just as i do for every phone i work on. I ran the SlimICS base and now it keeps rebooting and going back into recovery and doing this:
Finding update package...
Opening update package...
Installing update...
Slim ICS
Once Slim ICS pops up, it reboots and does it all over. I can yank the battery and manually go into recovery, but if i try to boot it up normal, it goes back into the loop. I am on CWM 5.0.2.7 also.
So what did i miss?
GB bootloaders most likely missing - flash 'em using Heimdall. And SlimICS doesn't have modem. So. Flash my ROM for a change may be.
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
And you flashed the base and the cappy essentials right? Not just the base
Sent from my SGH-I897 using xda premium
korockinout13 said:
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
Click to expand...
Click to collapse
trying to flash again just put it back in the loop. And I read that that does happen alot going from GB to ICS on the Cappy. But for Slim it didnt work.
Wdustin1 said:
And you flashed the base and the cappy essentials right? Not just the base
Click to expand...
Click to collapse
I never could get that far because it was the base that I started to install and it got bootlooped on, everytime it restarted, it went back into recovery and started to run the base again, and repeated boot loop. I read somewhere that teamhacksung's rom would get me over the GB to ICS bridge. This one here:
http://forum.xda-developers.com/showthread.php?t=1363760
It did the bootloop to, but when i yanked the battery and went back in and installed it a 2nd time, it didnt restart and installed correctly. After that I installed SlimICS. But I dont like it as much as i thought i would and now when i try to reinstall teamhacksung ROM, it errors out during the beggining of the installation. The MD5 is still fine. I dont think it likes the version of CWM recovery that SlimICS installed. I know CWMR went to an older version when i went from teamhacksung to SlimICS.
Flash glitch kernel first. Also, don't use the builds from that thread, it is old. Just flash the latest CM9 nightly
Swyped from my ICS Samsung Captivate
Stuck in A boot loop after flashing paranoid rom to cappy i897
I downloaded all needed files to internal SD just as the (how to upgrade the captivate i897 to Paranoid ROM said to do )
wipe data factory reset,wipe cache,selected install zip zip>package (pa_captivatemtd-1.99-13AUGUST2012.zip, md5sum: cc03bacf0f07a94bf25b482d64b94e63) then it started boot looping / att screen twice then android guy ,, then falling over with exclamation point in the middle of him , let it go considering options of 3 button combo weren't working ,, beside guide said 5-10 min to install then it made it to devil kernel installed gapps >> (gapps-jb-20120726-signed.zip, md5sum: f62cfe4a827202899919fd932d5246d7) now back in the boot loop again>>
i did make a nandroid backup but cant seem to get into cwm recovery or download mode . I did follow that guide to a tee.
any help or suggestions on this i would greatly appreciated if this post in wrong spot sry im new.
Also stuck in bootloop reverting to Gingerbread
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Reply Back.
HG_User said:
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Click to expand...
Click to collapse
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out. ??
---------- Post added at 06:38 PM ---------- Previous post was at 06:27 PM ----------
321321wrick said:
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out.
There also Ginger Bread Boot loaders Needed for it to start up Correctly - i personally don't know that much bout gingerbread rom i didn't like it as much as froyo WiFi issues'' the the stock odin should erase all info on your part thou 'e use Is OCD 1 i897UCJF6>lowercase work every time for me.
cept now because my usb is not able to charge phone or enter download mode or recovery which leaves jig option .
Click to expand...
Click to collapse
HG_User,
U can't go back to GB (or froyo/eclair) from CM, MIUI, ICS, JB, AOSP etc., etc. without using Odin or Heimdall---because of the different partitions used---Stock firmware is bml/rfs and all the AOSP etc etc are mtd/yaffs(2).
And u can only restore a backup when u r back running the base rom where u made the back up.
Use this...Stock i897ucKK4 GB 2.3.5 with or without bootloaders... http://forum.xda-developers.com/showthread.php?p=18370912
This kk4 should get u going. Then u can use Odin to flash Corn Kernel to get a cwm back...:thumbup:
Sent from my SGH-I897 using xda premium
... one step on the way: Back to Eclair
thanks for the advice. Ultimately, I decided I should use Odin 3 1-click to revert back to original (2.1 Eclair) firmware that I found on the first post of thread titled
[STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
This is a huge step forward because it makes my phone work, but it's also a step back in time to the early Eclair days.
Now my next step is to upgrade back to Gingerbread...
Edit: Thanks to all who pointed me in the right direction. I took the phone back to Eclair then used Samsung KiesMini (twice) to get it back to Gingerbread. After re-rooting and removing the AT&T Bloatware, it works fine again. I might try upgrading again to ICS or JB, but I didn't like Cyanogen 9 at all. Maybe I'm just used to the way AT&T polishes the UI, but Cyanogen didn't appeal at all. Now looking for a relatively polished but lightweight ICS or JB version... Also, it would be nice if when I upgrade it preserves the installed apps and what's on my home screens, but that seems unlikely going from AT&T-branded Gingerbread to an independent ICS or JB.
Hi,
I decided to try some JB ROMs. Coming from CM9, I wiped the phone, installed a new kernel and tried to flash CM10 (and later on, Tsunami). However, every time I try to flash a ROM I get the following error:
E:Error in /sdcard/[whatever i try to flash].zip
(Status 0)
Installation aborted.
I've tried Semaphore 2.2(s) and 2.3(s), as well as Devil kernel. It's unlikely the zip files are broken, as I downloaded them again from a different source. This issue doesn't apply to kernels, though - they flash fine. I even went back to stock briefly (via odin), but when I put in a JB kernel the issue persisted. I have plenty of space left in my phone so I doubt that's the cause.
Any ideas? I'd hate to have to run stock again.
jflint said:
Any ideas? I'd hate to have to run stock again.
Click to expand...
Click to collapse
If you are on ICS, try using an ICS kernel http://forum.xda-developers.com/showthread.php?t=1468795 most likely you have switched an incompatible CWM by flashing a wrong kernel for the upgrade
xsenman said:
If you are on ICS, try using an ICS kernel http://forum.xda-developers.com/showthread.php?t=1468795 most likely you have switched an incompatible CWM by flashing a wrong kernel for the upgrade
Click to expand...
Click to collapse
Hi, and thanks for the answer. After I tried flashing a compatible version of cwm, the phone somehow wiped my sdcard. After going to stock, reformatting the sdcard and rooting again I finally managed to go to cm10. Here's to hoping it'll hold until there's a more exciting phone on the horizon.
Hello All,
I recently upgraded my GT-I9000 to CWM10 JellyBean 4.1.2 a week ago and all was fine until last night when I was trying to follow one of the youtube videos to increase the internal memory on my phone. I tried it on my phone and for some reason my phone was stuck in the CWM recovery mode. When I rebooted, the phone was going back into recovery mode. I was panicking and in that rush, I tried doing a reset, clear data, clear cache, dalvik and all other stuff on the recovery mode menu. When nothing worked, I tried re-flashing the JB 4.1.2 from recovery mode. This flashing was erroring after 30% and was returning into recovery mode again. I also tried to use odin to flash the Android 2.3 which didn't work and now it goes into the CWM Recovery v3.0.0.5
Could someone please let me know how to get my phone back to work.
I would be really thankful to you all.
Thanks
First of all you have posted in the wrong section. This is only for development.
To get back the recovery, flash http://rootaxbox.no-ip.org/derteufe....1_Jelly_Helly_i9000_CFS_BLN_CMC_20121101.tar in Odin from computer and then flash the Hellybean zip again from the phone.
That is what you should do.
PS: Download the Hellybean zip again. The one that you have now might be corrupted. You need to go into Download mode with 3 Button Combo to use Odin.
Trak-X said:
First of all you have posted in the wrong section. This is only for development.
To get back the recovery, flash http://rootaxbox.no-ip.org/derteufe....1_Jelly_Helly_i9000_CFS_BLN_CMC_20121101.tar in Odin from computer and then flash the Hellybean zip again from the phone.
That is what you should do.
PS: Download the Hellybean zip again. The one that you have now might be corrupted. You need to go into Download mode with 3 Button Combo to use Odin.
Click to expand...
Click to collapse
Apologies for posting in the wrong section. Could the mod's please move this thread to the correct section please.
Thanks Trak-X the first half of your adivse worked for me (the ODIN bit) and I am now able to get into CWM recovery. I tried reflashing the Hellybean zip but it kept erroring at 10%. Error message is shown below
Installing HellyBean
GSM instllation
assert failed: run_program("/tmp/udater.sh")==0
I also downloaded a new Hellybean zip and tried reflashing with no luck and same error message. Pls advise on how I can go further now. I have a 2.3.6 rom downloaded, shall I flash this first to see if it works and if it does, I can flash Hellybean later.
Fixed!!!
chalfont_court said:
Apologies for posting in the wrong section. Could the mod's please move this thread to the correct section please.
Thanks Trak-X the first half of your adivse worked for me (the ODIN bit) and I am now able to get into CWM recovery. I tried reflashing the Hellybean zip but it kept erroring at 10%. Error message is shown below
Installing HellyBean
GSM instllation
assert failed: run_program("/tmp/udater.sh")==0
I also downloaded a new Hellybean zip and tried reflashing with no luck and same error message. Pls advise on how I can go further now. I have a 2.3.6 rom downloaded, shall I flash this first to see if it works and if it does, I can flash Hellybean later.
Click to expand...
Click to collapse
I installed the google apps file and for some reason the phone booted properly this time. Don't know how gapps installation fixed this issue.
I hope someone can help me.
I cannot enter in recovery. Just in Download mode. But my PC doesn't recognise my phone so I can't flash in Odin.
Don't know what to do!?
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
adobih said:
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
Click to expand...
Click to collapse
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Samtan4326 said:
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Click to expand...
Click to collapse
First off all thanks for helping.
I tried this one:
CF-ROOT-4.4-I9000BGJW5-1187857
CF-Root-4.4-I9000BOJW6-CL1177078
CF-Root-JP6-v1.2-Busybox-1.17.1 (this one didn't want to start recovery at all)
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
all I got from all of them is this
imageshack.us/f/805/08032008449.jpg (copy link to address bar )
Member Chainfire said "THIS IS NOT A ROM - it is only a kernel. You need to have a firmware already on your device"
I don't know really what that means. Probably that I have to install something else too, but what ?
Please can you tell me ?
And which of these CF-Roots is the right one, or the newest one, or how do recognize that ?
Thanks everyone who helps me.
eba
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After it's done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
adobih said:
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After is done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
Click to expand...
Click to collapse
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
beckzz said:
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
Click to expand...
Click to collapse
Well, I help you as much as I can and know, just write me where you stuck. And if you have some difficulties explaining it in English, dann kannst du mir auch auf deutsch schreiben, das verstehe ich auch
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & -->release buttons the moment u see bootanimation<--) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough). If not getting into recovery with waiting the first time just try to keep getting in recovery with 3 button combo & wait a couple of minutes. Eventually it does. I had the same thing 2 months ago coming from jb-->ics-->cm10, thats how I remembered.
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen. Didnt wipe nothing in between the flashing
Then flashed gapps & voila
Donovan662 said:
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & release buttons the moment u see bootanimation) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough)
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen
Then flashed gapps & voila
Click to expand...
Click to collapse
I tried like hundred times or more, but every time with the same result and I also tried with different kernels without success. Maybe some other error caused your status 7 error than mine. But anyway, it's always good to try all possibilities to resolve the problem.
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Donovan662 said:
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Click to expand...
Click to collapse
Unfortunately I wasn't that lucky, but I tell you something else. Now I know that no matter what I do and how badly i brick my phone I can always use that method to bring it to life back. So it's kind of final help that works if nothing else works
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Donovan662 said:
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Click to expand...
Click to collapse
I choose zip from sd card because I forgot to rename the file before copying to sd card, and when I lost my bricked my phone it was already to late to rename it. But i don't think that that was the problem, I mean it's just a name string that has no meaning after all.
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
beckzz said:
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
Click to expand...
Click to collapse
More or less I think we both had the same problem, because I also used this link wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide and heimdall 1.3.2 for flashing my phone. Just it always finished successfully so I didn't realize it was the root of all problems. I used also then Odin from the youtube video that I posted in a few posts earlier, installed Android 2.3.6 and then installed ROM Manager from Google play, and used the app to flash to ClockworkMod Recovery. After that I installed directly CM10 stable with success, and without CM9 detour.
So I posted a help thing about EFS a while back and didnt get to much help with that but i managed to figure things out. Now however
ive got myself into another predicament i cant seem to get out of.
So, from the start, i have a galaxy s3 (GT i-9305T) it was rooted, i still had the stock rom, but was running the beoffla kernal.
The idea was to download and install "JustArchi I9300XXUGML2 stock, deodexed and all the rest" then start finding
some nice themes. Ive got philz_touch_6.07.9-i9305.tar installed for my recovery.
This is where the trouble starts...
So first off i wipe the cache and the davik cache, go to install the rom then i get this: (ill go from installing update)
assert failed: write_raw_image (" /tmp/boot.img" , " /dev/block/mmcblk0p5" )
E: Error in /storage/sdcard1/Just archi........zip
(Status 7)
Installation aborted
Now i looked up a whole heap of pages to see if i could sort it out myself and i tried a few different things,
none of which have prevailed. First i tried to reflash an insecure boot image then try again, nup. I tried to
flash back to stock recovery and re format (No errors) then back to custom. Mounted /data and /system
and re formatted which worked with no error, still same error when flashing rom though. Also tried flashing
with different custom recovery, no luck there either.
There were a few other things i tried but i cant really remember what i did because
this has been a problem for a while now. Some of the pages i looked over for
information were:
http://www.droidforums.net/forum/android-hacks-help/26658-assert-failed-write_raw_image-tmp-boot-img.html
http://forum.xda-developers.com/showthread.php?t=1045887
And this is the one im on at the moment, im currently downloading a stock rom from sammobile to try flash.
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305t-10-2-upgrade-boot-stops-unable-t2406422
"UPDATE"
Finished downloading the stock rom, tried to install with philz recovery and got this:
Installing: /storage/sdcard1/I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip
Finding update package...
Opening update package....
Installing update...
Installation aborted.
And thats it, no kind of specific error codes or anything.
Thanks in advance to anyone who can help me out,
really stuck on this one.
IIEsoticoII said:
So I posted a help thing about EFS a while back and didnt get to much help with that but i managed to figure things out. Now however
ive got myself into another predicament i cant seem to get out of.
So, from the start, i have a galaxy s3 (GT i-9305T) it was rooted, i still had the stock rom, but was running the beoffla kernal.
The idea was to download and install "JustArchi I9300XXUGML2 stock, deodexed and all the rest" then start finding
some nice themes. Ive got philz_touch_6.07.9-i9305.tar installed for my recovery.
This is where the trouble starts...
So first off i wipe the cache and the davik cache, go to install the rom then i get this: (ill go from installing update)
assert failed: write_raw_image (" /tmp/boot.img" , " /dev/block/mmcblk0p5" )
E: Error in /storage/sdcard1/Just archi........zip
(Status 7)
Installation aborted
Now i looked up a whole heap of pages to see if i could sort it out myself and i tried a few different things,
none of which have prevailed. First i tried to reflash an insecure boot image then try again, nup. I tried to
flash back to stock recovery and re format (No errors) then back to custom. Mounted /data and /system
and re formatted which worked with no error, still same error when flashing rom though. Also tried flashing
with different custom recovery, no luck there either.
There were a few other things i tried but i cant really remember what i did because
this has been a problem for a while now. Some of the pages i looked over for
information were:
http://www.droidforums.net/forum/android-hacks-help/26658-assert-failed-write_raw_image-tmp-boot-img.html
http://forum.xda-developers.com/showthread.php?t=1045887
And this is the one im on at the moment, im currently downloading a stock rom from sammobile to try flash.
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305t-10-2-upgrade-boot-stops-unable-t2406422
"UPDATE"
Finished downloading the stock rom, tried to install with philz recovery and got this:
Installing: /storage/sdcard1/I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip
Finding update package...
Opening update package....
Installing update...
Installation aborted.
And thats it, no kind of specific error codes or anything.
Thanks in advance to anyone who can help me out,
really stuck on this one.
Click to expand...
Click to collapse
Can anybody at all shed some light on my situation,
or at least a place for me to start learning myself...
Hi.
If you downloaded the stock ROM from sammy mobile are these not meant to be installed via Odin?
There are a few post if you search for some of the pre rooted stock ROMs that you can flash with odin.
I would start from there.
Sent from my GT-I9305 using xda app-developers app
johnnyblaze1977 said:
Hi.
If you downloaded the stock ROM from sammy mobile are these not meant to be installed via Odin?
There are a few post if you search for some of the pre rooted stock ROMs that you can flash with odin.
I would start from there.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
The roms i downloaded from samsmobile were in .zip files, which im pretty
sure has to be flashed with one of the custom recoveries.
Thanks though
at first seems you tried to flash rom designed for i9300
then, you downloaded an ODIN image and you have to flash it by ODIN, no way you'd flash it over any recovery
to be more specific:
unzip the file I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip you downloaded, you should get a huge file with extension of .md5 or .tar
read in the forums how to use ODIN to flash firmware
adamuadamu said:
at first seems you tried to flash rom designed for i9300
then, you downloaded an ODIN image and you have to flash it by ODIN, no way you'd flash it over any recovery
to be more specific:
unzip the file I9305TDVBME2_I9305TTELBME1_TEL (STOCK).zip you downloaded, you should get a huge file with extension of .md5 or .tar
read in the forums how to use ODIN to flash firmware
Click to expand...
Click to collapse
Yes ive just done this now and flashed the stock rom with odin
and i think everything has gone well (im not sure as my screen is
water damaged but i did here boot audio only once) so im
letting my phone sit in a bag of rice in pieces for the night
and am going to check things out tommorrow.