Hey guys, i had lollipop 5.0 (CWM12) on my phone, but it was kinda slow for me (only 200mb ram) and i wanted to do a factory reset (from settings) and my whole phone ****ed up after it, it was looping the TWRP screen, kinda bootloop but for recovery mode, after hardly i could reflash a rom from PC with odin (same 5.0 rom) but now, when i start the phone, i don't see the basic startup logo just some ****ed up colors like red, blue, yellow etc, after it disappears and phones start up, after startup i get a lot of "Stopped Working" errors (maybe because i didn't install google apps, cuz i cant). When i wan't to boot into recovery mod, i only see those ****ed up colors stuck, and nothing happens. Any idea? I would really really appreciate it!
CoreyHUN said:
Hey guys, i had lollipop 5.0 (CWM12) on my phone, but it was kinda slow for me (only 200mb ram) and i wanted to do a factory reset (from settings) and my whole phone ****ed up after it, it was looping the TWRP screen, kinda bootloop but for recovery mode, after hardly i could reflash a rom from PC with odin (same 5.0 rom) but now, when i start the phone, i don't see the basic startup logo just some ****ed up colors like red, blue, yellow etc, after it disappears and phones start up, after startup i get a lot of "Stopped Working" errors (maybe because i didn't install google apps, cuz i cant). When i wan't to boot into recovery mod, i only see those ****ed up colors stuck, and nothing happens. Any idea? I would really really appreciate it!
Click to expand...
Click to collapse
Flash the original bootlogo, here
I feel like this is going to be a long thread but I'll make it short as much as possible with as much details
I have a SONY Xperia SP C5303 stuck in a boot loop, it was given to me by a friend.
The phone was on stock firmware, android 4.3, unrooted, bootloader locked.
As he was using the phone while charging, he activated WiFi, after a while he activated Bluetooth (WiFi and Bluetooth at the same time) and then it just turned off, rebooted and stuck in the "SONY logo => Xperia logo=> Orange logo" boot loop and then it just fades away and blacks out and reboots.
After many attempts, he wasn't able to fix it and he gave it to me .
Now the first thing I did was flashing it using FlashTool with the firmware "C5303_12.1.A.1.207_AU" but still stuck on boot loop, the only thing that happened is that the Orange logo changed into the colorful waves animation.
I flashed it a couple of times more, the same method, but still, the same results.
Next thing I did, I updated it using SONY PC Companion, after the update finished, it was still in boot loop (ALTHOUGH, the lock screen DID appear but I was not able to do anything, and the screen faded away again)
So, I sent it to a repairer, here's what he have done :
_ He did something (?) and gave it back to me with 0 charge, so I charged it at home and when I turned it on, still boot loop, so I returned it to him.
_ This time, it ACTUALLY worked ! The phone came back to life, everything was working just fine, until I activated WiFi and I noticed that it's not working, then I activated Bluetooth as well (AT THE SAME TIME, remember what I said at first ?) then the screen just faded away and back to boot loop, I sent it back to the repairer and told him that he hasn't changed anything and that the real issue is that WiFi and Bluetooth do not work/cause boot loop when working at the same time
_ He revived the phone once again but the WiFi/Bluetooth issue was not fixed and he told me that there's nothing he can do anymore, and he refunded me.
I can't complain though cause all I wanted was the phone working !! I didn't care less about WiFi nor Bluetooth.
This morning, as I wanted to root the device, I tried the DoomLord Easy Rooting Toolkit, after flashing the first kernel using FlashTool (Yes, I followed the steps VERY carefully) and after the flash of the kernel finished, the phone is once again in boot loop, this time boot looping on the SONY logo only
So the conclusion is that the phone can actually be revived. How ? That's what I'd kill to know !! (Jk)
I tried flashing again the "C5303_12.1.A.1.207_AU" (4.3) but nothing, then I tried the previous firmware (4.1) but still nothing.
Sometimes, after the flashing, when the phone boots for the first time, the lock screen appears but fades away again (unable to touch anything)
SO PLEAAAAAAASE !! If there's anything I can do, please tell me, all I want is for the phone to work, hell to the data or anything else, also don't mind the warranty at all. And I'm not from the US, so there are no SONY service points here
There's a video in the rar file attached down there, it shows how the boot loop happens.
zedex39zeo said:
I feel like this is going to be a long thread but I'll make it short as much as possible with as much details
I have a SONY Xperia SP C5303 stuck in a boot loop, it was given to me by a friend.
The phone was on stock firmware, android 4.3, unrooted, bootloader locked.
As he was using the phone while charging, he activated WiFi, after a while he activated Bluetooth (WiFi and Bluetooth at the same time) and then it just turned off, rebooted and stuck in the "SONY logo => Xperia logo=> Orange logo" boot loop and then it just fades away and blacks out and reboots.
After many attempts, he wasn't able to fix it and he gave it to me .
Now the first thing I did was flashing it using FlashTool with the firmware "C5303_12.1.A.1.207_AU" but still stuck on boot loop, the only thing that happened is that the Orange logo changed into the colorful waves animation.
I flashed it a couple of times more, the same method, but still, the same results.
Next thing I did, I updated it using SONY PC Companion, after the update finished, it was still in boot loop (ALTHOUGH, the lock screen DID appear but I was not able to do anything, and the screen faded away again)
So, I sent it to a repairer, here's what he have done :
_ He did something (?) and gave it back to me with 0 charge, so I charged it at home and when I turned it on, still boot loop, so I returned it to him.
_ This time, it ACTUALLY worked ! The phone came back to life, everything was working just fine, until I activated WiFi and I noticed that it's not working, then I activated Bluetooth as well (AT THE SAME TIME, remember what I said at first ?) then the screen just faded away and back to boot loop, I sent it back to the repairer and told him that he hasn't changed anything and that the real issue is that WiFi and Bluetooth do not work/cause boot loop when working at the same time
_ He revived the phone once again but the WiFi/Bluetooth issue was not fixed and he told me that there's nothing he can do anymore, and he refunded me.
I can't complain though cause all I wanted was the phone working !! I didn't care less about WiFi nor Bluetooth.
This morning, as I wanted to root the device, I tried the DoomLord Easy Rooting Toolkit, after flashing the first kernel using FlashTool (Yes, I followed the steps VERY carefully) and after the flash of the kernel finished, the phone is once again in boot loop, this time boot looping on the SONY logo only
So the conclusion is that the phone can actually be revived. How ? That's what I'd kill to know !! (Jk)
I tried flashing again the "C5303_12.1.A.1.207_AU" (4.3) but nothing, then I tried the previous firmware (4.1) but still nothing.
Sometimes, after the flashing, when the phone boots for the first time, the lock screen appears but fades away again (unable to touch anything)
SO PLEAAAAAAASE !! If there's anything I can do, please tell me, all I want is for the phone to work, hell to the data or anything else, also don't mind the warranty at all. And I'm not from the US, so there are no SONY service points here
There's a video in the rar file attached down there, it shows how the boot loop happens.
Click to expand...
Click to collapse
I assume you've got no recovery installed? flash the william's kernel elf in flashtool. This will give you a kernel which has recovery so what you have to do is download and flash Omni-X, Nexus Prime's omni (my personal favorite) or Paranoid Android. These are all LBL Roms so you don't have to worry about anything at all. Also flash the Super Su binary. I'll provide the links to all these if you want.
Indeed, no recovery installed and PLEASE DO GIVE ME THE LINKS !! I'll try again and again until it's fixed, although I highly doubt that it will.
If all fails, I will just send it to the repairer once again to bring it back to life once again
Indeed, no recovery installed and PLEASE DO GIVE ME THE LINKS !! I'll try again and again until it's fixed, although I highly doubt that it will.
If all fails, I will just send it to the repairer once again to bring it back to life once again
zedex39zeo said:
Indeed, no recovery installed and PLEASE DO GIVE ME THE LINKS !! I'll try again and again until it's fixed, although I highly doubt that it will.
If all fails, I will just send it to the repairer once again to bring it back to life once again
Click to expand...
Click to collapse
you can't flash that ...you are locked bl right ?
NotAbdShahid said:
I assume you've got no recovery installed? flash the william's kernel elf in flashtool. This will give you a kernel which has recovery so what you have to do is download and flash Omni-X, Nexus Prime's omni (my personal favorite) or Paranoid Android. These are all LBL Roms so you don't have to worry about anything at all. Also flash the Super Su binary. I'll provide the links to all these if you want.
Click to expand...
Click to collapse
flash- said:
you can't flash that ...you are locked bl right ?
Click to expand...
Click to collapse
Yup, the BL isn't unlocked
flash- said:
you can't flash that ...you are locked bl right ?
Click to expand...
Click to collapse
I know he can't flash the kernel since he's on a locked bootloader. But if he flashes the rom as soon as booting into the recovery, then he will be using the stock .207 kernel and the Rom will boot
NotAbdShahid said:
I know he can't flash the kernel since he's on a locked bootloader. But if he flashes the rom as soon as booting into the recovery, then he will be using the stock .207 kernel and the Rom will boot
Click to expand...
Click to collapse
maybe the phone will get bricked and not boot ...idk
Hi guys, i have a weird problem here.
I have updated my phone to 5.1 a couple of weeks ago and on friday 08/08 i let the phone discharge completely , put on charger and went to sleep.
When i woke up, tried to power up the god **** phone and it just froze at Motorola Screen, then boot it up to fastboot and tried to Factory Reset him.
Dont know why, it didnt worked, then i unlocked the boot loader and tried to flash via RSD with a Stock firmware of the same version xt1058_ghost_retbr_5.1_lpa23.12-15_cid12_cfc
After flashing everythink looked normal, but the problem persists, Manually flashed GPT.BIN, still doesnt work.
It start, goes to the animated moto logo and later the screen goes off and nothing happens. PLEASE GUYS HELP ME HERE!
(Sorry for the worst english that you ever seen here in xdaforum)
Hi guyz, I was flashing twrp recovery on my Lenovo a7000 with Sp flash tool. But I saw an error saying pmt change for rom something like that. Then I formated it with sp flash tool. When I booted my phone I saw grey color with lines on it. And also it vibrates when I I press and hold the power button to switch on it. I searched every thing on Internet about this. But nothing helped me. I also tried flashing different stock roms.
S144, S234. But same the screen bootup with grey. Before this I have also went through this problem and went to the store where I purchased this phone. They replaced the screen and it was good. Now I tried it again and ran to the same fate. Please guys help me. Is it the software problem or the hardware???. I really need to know. As I'm using my friend's phone because I have destroyed mine. Please help.
~~Xaid
hello to all,
So my problem is that i got a black screen after i flashed with sp flash tool. I am not able to see anything on screen nor put it in recovery or fastboot. If i connect to pc you can here where the pc picks it up. But still cant see anything on the screen. Ive tried charging it, changing cables, reflashing because am able to put it in broom mode so the sp flash picks it up and the result always complets good with the green check mark but you can still not see anything in the screen. Did my screen burn out or what? Can you please help.