Volume Notification wont automatically disappear - am I missing a trick? - Nexus 6 Q&A, Help & Troubleshooting

Since Marshmallow I have noticed that if I adjust the audio in for example a video, the pop down volume notification wont automatically disappear unless I press the screen.
This is pretty annoying as this causes some videos to pause or other screens to pop up.
Has anyone else noticed this, and if so, is there a simple fix?

Google made it that way, no way on the stock side to make it auto hide but you can swipe it up without pausing YouTube and Facebook
Sent from my Nexus 6 using Tapatalk

Related

[Q] [Zeus 6.x] Swipe notifications not triggering associated actions

Hi,
question about the swipe notfications:
Usually when you click on a notification, the associated action is carried out (if any) and the notification disappears. Now, when swiping a notification away, it will disappear without executing any further actions. Is this the intended behavior?
Example:
I was looking at a video streamed via theSoundhound app and after switching to another app, Sundhound continues to play in the background and displays a notification "Click to stop" or something. I swiped it away and the stream kept on playing so I had to navigate back to the app and stop it there.
Thanks
Jo
Yes, it is supposed to act like this. Clicking the notification executes a relevant action while swiping it away simply dismisses it.

Music persistent notification

Hi guys I was wondering if someone figured out how to disable the persistent notification while playing music. It's so annoying. It covers the bottom half of the screen and I can't tell the time, which kind of defeats the purpose. I tried disabling notifications for the play music app but it's still there. Any suggestions?
The new wear update fixed it. Yay!

Ring Doorbell Pro Integration With Tablet

I have the Ring Doorbell Pro and am generally happy with its performance. I also just mounted an older Samsung Galaxy Tab 4 10.1 on the wall, as a hub for my various home automation lights, switches, etc..
I am trying to get the Ring Doorbell app to open when there is a ring, or motion is detected, to show the image from the Ring's camera for 40 seconds, then to close and return to the tablet's Home page.
I purchased Tasker, but unfortunately, my recipe is not working well at all. Here is what I have as a Tasker profile:
The trigger is a Ring app Notification when either a ring or motion is detected.
1. Open Ring app
2. Wait 41 seconds
3. Go Home
This works sometimes, but most of the time it either does not open the app, or it does not close the Ring camera-view window, or it does not go to the Home page, but stays on the Ring app's list view of events.
Has anyone done what I am trying to do and how did they do it? Any other suggestions?
I also have a Smartthings hub, if this would help in anyway. And Amazon Echo
Thanks!
Try putting to "Always" the Use Reliable Alarms option in settings/preferences/monitor
GrippingSphere said:
Try putting to "Always" the Use Reliable Alarms option in settings/preferences/monitor
Click to expand...
Click to collapse
Thanks! I did it, restarted tasker and the notification trigger worked several times in a row.
But it still fails to close the camera window, or to Go Home
Anyone with a Ring Doorbell who has achieved the task of bringing up the view window to the front for 40 seconds (the standard recording duration of Ring), and then closing it and returning to the Home screen?
So, does this mean that Tasker is unable to reliably bring an app to the front for 40 seconds, then close it?
Bump! Interested as well..
I suggest checking two things:
1. Instead of just going home, try killing the app
2. Double check the priorities of actions and set the task to abort existing tasks
MacGuy2006 said:
Anyone with a Ring Doorbell who has achieved the task of bringing up the view window to the front for 40 seconds (the standard recording duration of Ring), and then closing it and returning to the Home screen?
Click to expand...
Click to collapse
have you looked into using IFTTT? there are ring recipes on there
To the OP. Did you ever get this to work?
I am trying the same thing with tasker, but tasker is new to me so im not sure how exactly to set this up. Are you able to assist?
Bump! Anyone have luck with this?
So far I have tasker doing the following on my wall mounted tablet near the front door upon receiving a Ring doorbell notification (motion or door bell):
Screen unlock
Secure settings > wake (screen & keyboard lights on 4 seconds)
Launch app > Ring
Wait 30 seconds
Go Home
All the tasks trigger except the wait for 30 seconds. Tasker ends up going home before the ring camera fires up and displays on the screen. This also has the unfortunate side effect of locking the ring doorbell and I have to manually go into the app and click the red hang up icon to “release” the doorbell. Any ideas on how to solve for the wait issue AND to gracefully close the Ring app after 40 seconds?
Thanks.
Me Too
I'm also trying to do the same thing with an old Samsung Galaxy 10.1 tablet so also very interested if someone has figured out how to get this to work.
Couple of additional questions:
1. If you have a wall mounted tablet how are you dealing with RING app wanting to run in Portrait mode only for navigation but landscape mode only for Live View
2. How to hve RING app immediately go to live camera via as right now I have to go from RING menu to Front Door and then Live View when motion is detected or click on notification if doorbell is rung. My goal is to be able to do what Amazon Echo Show can do which is give a voice command to Tablet .. "Show Front Door"
RING App combined with TASKER and/or IFTTT on an Android Tablet set-up as a KIOSK have a lot of potential if these issue can be resolved.
THanks,
Chris
zsyed said:
Bump! Anyone have luck with this?
So far I have tasker doing the following on my wall mounted tablet near the front door upon receiving a Ring doorbell notification (motion or door bell):
Screen unlock
Secure settings > wake (screen & keyboard lights on 4 seconds)
Launch app > Ring
Wait 30 seconds
Go Home
All the tasks trigger except the wait for 30 seconds. Tasker ends up going home before the ring camera fires up and displays on the screen. This also has the unfortunate side effect of locking the ring doorbell and I have to manually go into the app and click the red hang up icon to “release” the doorbell. Any ideas on how to solve for the wait issue AND to gracefully close the Ring app after 40 seconds?
Thanks.
Click to expand...
Click to collapse
Ring Doorbell automation with Tasker, Notification Listener and Rotation Controller
I have forced my RING App to run in Landscape Mode with an app called "Rotation Controller".
To have the RING App go directly to the live cam when the doorbell is rung, you can use the Tasker Plugin "Notification Listener" and make Tasker click on the notification as soon as it pops up. This makes the device switch directly to the camera view instead of the Ring App Homescreen.
This works fine so far, BUT yet I have found no way to close the camera view after a few seconds automatically. I can´t use the tasker "kill app" command, since my Xido X111 android device is not rootable. The "go home" command would bring up the home screen, but the camera window is still running in the background and thus blocking the doorbell until the hang-up symbol is clicked manually.
Any ideas how to close the camera view somehow on an unrooted device?
Greets
Michael
gomce said:
I'm also trying to do the same thing with an old Samsung Galaxy 10.1 tablet so also very interested if someone has figured out how to get this to work.
Couple of additional questions:
1. If you have a wall mounted tablet how are you dealing with RING app wanting to run in Portrait mode only for navigation but landscape mode only for Live View
2. How to hve RING app immediately go to live camera via as right now I have to go from RING menu to Front Door and then Live View when motion is detected or click on notification if doorbell is rung. My goal is to be able to do what Amazon Echo Show can do which is give a voice command to Tablet .. "Show Front Door"
RING App combined with TASKER and/or IFTTT on an Android Tablet set-up as a KIOSK have a lot of potential if these issue can be resolved.
THanks,
Chris
Click to expand...
Click to collapse
derschmock said:
This works fine so far, BUT yet I have found no way to close the camera view after a few seconds automatically. I can´t use the tasker "kill app" command, since my Xido X111 android device is not rootable. The "go home" command would bring up the home screen, but the camera window is still running in the background and thus blocking the doorbell until the hang-up symbol is clicked manually.
Any ideas how to close the camera view somehow on an unrooted device?
Greets
Michael
Click to expand...
Click to collapse
If you can access your tablet with ADB to do the set-up, look into AutoTools/AutoInput
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers
AutoInput Point click didn‘t work for me, because the ring app doesn‘t seem to support accessibility from other apps (or maybe i was just too incompetent) BUT i found a very easy solution: after tasker fires up the ring camera and waits for x seconds, i let it just load the ring app again with the toggle „always start new copy“. This doesn‘t kill the ring app, but at least kills the camera screen and therefore prevent the doorbell from locking up. Now it just works as i wanted
zsyed said:
Bump! Anyone have luck with this?
So far I have tasker doing the following on my wall mounted tablet near the front door upon receiving a Ring doorbell notification (motion or door bell):
Screen unlock
Secure settings > wake (screen & keyboard lights on 4 seconds)
Launch app > Ring
Wait 30 seconds
Go Home
All the tasks trigger except the wait for 30 seconds. Tasker ends up going home before the ring camera fires up and displays on the screen. This also has the unfortunate side effect of locking the ring doorbell and I have to manually go into the app and click the red hang up icon to “release” the doorbell. Any ideas on how to solve for the wait issue AND to gracefully close the Ring app after 40 seconds?
Thanks.
Click to expand...
Click to collapse
can you share how you set this up.. i purchased tasker but not seeing the options you layed out.
raf1919 said:
can you share how you set this up.. i purchased tasker but not seeing the options you layed out.
Click to expand...
Click to collapse
You need the additional Tasker Plugin "Notification Listener" and make Tasker click on the notification as soon as it pops up. To close the camera screen after a few seconds, you just load the ring app again with tasker (don´t forget the toggle „always start new copy“).
derschmock said:
You need the additional Tasker Plugin "Notification Listener" and make Tasker click on the notification as soon as it pops up. To close the camera screen after a few seconds, you just load the ring app again with tasker (don´t forget the toggle „always start new copy“).
Click to expand...
Click to collapse
downloaded it...
tasker is just sooo overwhelming.. so many settings. so i create a profile or task? i went to task.. open app Ring. than i'm stuck on what next. what do i put for "if"
raf1919 said:
downloaded it...
tasker is just sooo overwhelming.. so many settings. so i create a profile or task? i went to task.. open app Ring. than i'm stuck on what next. what do i put for "if"
Click to expand...
Click to collapse
"Profile" is the event that triggers something. In our case this is the notification from the ring app. you can choose "Notification Listener Event -> Posted Apps -> Ring App" for that.
"Task" are the actions which are triggered by the Profile Event (click on the notification to open the camera screen, wait x Seconds, close the camera by opening the ring app again):
1. Plugin>Gestures>Configuration>Notification Key: %nlkey
2. wait>45 Seconds
3. Launch App>Ring
you don´t need the "if"
I got it working!! thanks alot
Hi.
I've got all necessary programs (first time I bought something from play store) but can't get it to work.
Part with :"Plugin>Gestures>Configuration>Notification Key: %nlkey"
does not work.
How to get it to work?

Question S21 ultra notification control

Quick question, is there a way to make the phone ring for a notification but then when I open the phone stop doing the sound as more come in? For example, if I get a WhatsApp notification in my pocket it rings, but then when I open the phone it keeps sounding each time I get a message. Is there a an app or a way I can prevent this? Thanks
I don't know if that's something you might be able to setup in Bixby Routines?
I checked bixby. Looks like there is one possible way. Open app then sound mode goes mute, close app and sound mode coes back waht it was.

Question Notifications not showing on lock screen

So this is weird. I am not using dark mode. I removed Vivo.pem. I followed (I think) all the instructions to activate notifications. At the begginning my notifications come perfectly everywhere(I have it to light the screen when notification comes).
However, after a while or a few minutes the meesages still come but the screen does not light up nor does anything show on lockscreen. They do show on the dropdown screen and they do show on the app icon as well.
I use Nova usually, I tried with and without Nova to no avail. However when I reboot the messages show (sometimes) on lockscreen..afterwhich they stop. its like something blocks all notification to lockscreen after a while.
Did I miss someting in the instructions?
rudabb said:
So this is weird. I am not using dark mode. I removed Vivo.pem. I followed (I think) all the instructions to activate notifications. At the begginning my notifications come perfectly everywhere(I have it to light the screen when notification comes).
However, after a while or a few minutes the meesages still come but the screen does not light up nor does anything show on lockscreen. They do show on the dropdown screen and they do show on the app icon as well.
I use Nova usually, I tried with and without Nova to no avail. However when I reboot the messages show (sometimes) on lockscreen..afterwhich they stop. its like something blocks all notification to lockscreen after a while.
Did I miss someting in the instructions?
Click to expand...
Click to collapse
Set your lockscreen notifications this way . Than individually allow apps you want to show notifications on lockscreen . And you're good to go .
I do(I think).
It's not about the lighting of the screen per say,it's about the messages not showing(or screen lighting) after a while on the lockscreen. It becomes a clean lockscreen ..but when I go to drop down menu or check the badges on the apps they are all there.
Again it works sometimes at the beginning then stops populating the lockscreen
I don't know if it works for you or not but try these for the apps you wanna get the notifications.
1. Disable Allow smart notification control.
2. Enable the settings from 2nd screenshot.
ah..ok I see...will give it a shot
kairukaizer99 said:
I don't know if it works for you or not but try these for the apps you wanna get the notifications.
1. Disable Allow smart notification control.
2. Enable the settings from 2nd screenshot.
View attachment 5834325View attachment 5834331
Click to expand...
Click to collapse
Mine doesn't have that option.
"Allow Smart notification control"
Mine doesn't either ..but I think that there is a general setting that says enable and disable which makes it not show on a per app level.
On another note..the messages all of a sudden started to show. And I did NOTHING DIFFERENT. I had the exact settings as in attachments.I had previously rebooted the phone like many times to no avail.
I know we're beating a deadhorse with vivo notifications, but man how can someone mess up something so simple ....and it's so hard to figure it out when you can't really replicate it .
I have this thought: If the notifications are still coming but just not showing on the lock screen, on Samsung phones (S21, S22....) also, it just notifies the app icon. notifications come in without lighting up the screen and showing a summary of what is being notified normally like other phones. I fixed it with a Glimpse Notifications software available on the Play Store. All incoming notifications will light up the lock screen and show a summary of the content like other phones

Categories

Resources