Hello Everyone.
I lost my phone after Installing New OJ3 Upadate.
Got My Phone Rooted.
Installed Arter 7 Beta 1.
After Trying to Delete Some Unwanted Apks From System Lost My Phone To Bootloop. So Tried to Download Software From Sam Mobile and that was Older OH4. Googled and Downloaded OJ3 And Tried to Flash Via ODIN 3.10.7 But to No Luck and It Failed.
Since Then I am Stuck at NOTE 5 Screen and No Matter What I do Cannot Get it Sorted.
Now Please Help Me And Provide Detailed HOW TO to Restore My Phone.
My Regards and Respects to All.
first of all you should know that newer samsung phones are not be downgradable to older fw.. So fw version which is installed on your device and fw newer than that can only be flashed.. And, second, what were ur steps during odin flash???
Switch to download mode then make sure latest odin and samsung usb drivers are installed on ur pc,disable keis if installed.. Then connect ur device, tick factry reset and auto reboot and untick re partition..click ap and select the downloaded firmware.. Once md5 check finished click flash..
Ur phn will reboot after flashing and you are goot to go.
arbaz.kagzi said:
first of all you should know that newer samsung phones are not be downgradable to older fw.. So fw version which is installed on your device and fw newer than that can only be flashed.. And, second, what were ur steps during odin flash???
Switch to download mode then make sure latest odin and samsung usb drivers are installed on ur pc,disable keis if installed.. Then connect ur device, tick factry reset and auto reboot and untick re partition..click ap and select the downloaded firmware.. Once md5 check finished click flash..
Ur phn will reboot after flashing and you are goot to go.
Click to expand...
Click to collapse
I will Surely Give it a Go.
I have Been Rooting Phones Since G1
But This Has Never Happened To me.
Even The OJ3 Downloaded Firmware is Not Getting Flashed.
To My Knowledge I need PIT file
Which I cannot Get FRom Anywhere On Internet.
If Someone Can Provide Me PIT file.
I will be ever grateful to that Person.
I thank you for your kind Reply
talpur1 said:
I will Surely Give it a Go.
I have Been Rooting Phones Since G1
But This Has Never Happened To me.
Even The OJ3 Downloaded Firmware is Not Getting Flashed.
To My Knowledge I need PIT file
Which I cannot Get FRom Anywhere On Internet.
If Someone Can Provide Me PIT file.
I will be ever grateful to that Person.
I thank you for your kind Reply
Click to expand...
Click to collapse
Try checked at this link http://forum.xda-developers.com/note5/general/project-noble-firmware-pit-file-galaxy-t3179529
Good luck.
talpur1 said:
I will Surely Give it a Go.
I have Been Rooting Phones Since G1
But This Has Never Happened To me.
Even The OJ3 Downloaded Firmware is Not Getting Flashed.
To My Knowledge I need PIT file
Which I cannot Get FRom Anywhere On Internet.
If Someone Can Provide Me PIT file.
I will be ever grateful to that Person.
I thank you for your kind Reply
Click to expand...
Click to collapse
fw with pit file is available on note5 xda general thread..the thread is sticky..
arbaz.kagzi said:
fw with pit file is available on note5 xda general thread..the thread is sticky..
Click to expand...
Click to collapse
I have Seen That Thread But I do Not See N9208 Model Firmware or Any Files
I have Got No Idea If Any Other Pit File Would Work Or Not
So Still Waiting With My Bricked Phone for Samsung to Release XME OJ3 Firmware
If Anyone Knows Or Can Guide I will Be Thankful.
Regards
as an advice, you can google how to extract pit file from samsung phones..then ask in n9208 page if anyone could provide pit file for you (remember to check correct model no. and internal storage, it matters)
arbaz.kagzi said:
as an advice, you can google how to extract pit file from samsung phones..then ask in n9208 page if anyone could provide pit file for you (remember to check correct model no. and internal storage, it matters)
Click to expand...
Click to collapse
Dear Sir.
My Phone is Dead
I cannot Extract From it.
If Someone Can provide Me With Pit File That Would Be Great.
And Many People Have Asked for N9208 Pit Files But None Is Provided By The OP.
Regards
any n9208 user can provide you the file.. All you need is a rooted phone
---------- Post added at 11:50 PM ---------- Previous post was at 11:45 PM ----------
www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
try this.. its a really helpful article..
arbaz.kagzi said:
any n9208 user can provide you the file.. All you need is a rooted phone
---------- Post added at 11:50 PM ---------- Previous post was at 11:45 PM ----------
www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
try this.. its a really helpful article..
Click to expand...
Click to collapse
Dear Arbaz
I have Seen and Read The Article.
And Requested IN many Threads For PAC Firmware or Pit File.
But Until Samsung Officially Releases N9208XXOJ5 Malaysian Firmware.
Till Then I or Any One Else Who Are in the Same Boat As Mine Will Have to Sleep Over It
Regards
talpur1 said:
Hello Everyone.
I lost my phone after Installing New OJ3 Upadate.
Click to expand...
Click to collapse
I do not know about the pit file being included while using Smart Switch but I would sure give that a try. I have mentioned it to others as fix but they did not seem to be able to figure out how to use it correctly so I will list the procedure out for you and you can try and see.
Put your phone in Download Mode
Open Smart Switch on your PC
Click More in Smart Switch
Click Emergency software recovery and initialization
Click the Device Initialization tab
Type in your model number using caps for any letters in your model and using the dash where appropriate
Click Search
Type in your serial number again using caps for all letters
You will see a pop up saying that it can be initialized or something like that, click OK
A new pop up will tell you which version it will be initialized to
Click OK then it will start downloading some files
Another pop up will come up telling you how to enter download mode
Connect your phone to the PC and click OK
It will download the firmware from Samsung
If you followed those steps exactly it will work unless you really do need another pit file that Smart Switch does not provide but I do not see why it would not.
Good luck
talpur1 said:
Dear Arbaz
I have Seen and Read The Article.
And Requested IN many Threads For PAC Firmware or Pit File.
But Until Samsung Officially Releases N9208XXOJ5 Malaysian Firmware.
Till Then I or Any One Else Who Are in the Same Boat As Mine Will Have to Sleep Over It
Regards
Click to expand...
Click to collapse
sorry if samsung havnt released fw yet..there is no way other than to wait..
EDIT:avove mentioned solution using smart swirch might help you..give it a try
also,when smart switch completes downloading files then try for searching the fw files in samsung folders (obviously whole firmware is fownloaded on your pc for reinstalling os)
arbaz.kagzi said:
sorry if samsung havnt released fw yet..there is no way other than to wait..
EDIT:avove mentioned solution using smart swirch might help you..give it a try
also,when smart switch completes downloading files then try for searching the fw files in samsung folders (obviously whole firmware is fownloaded on your pc for reinstalling os)
Click to expand...
Click to collapse
I have Tried Smart Switch but it starts downloading OH4.
So Its A No Go
if you have an unlimited plan then give it a go, after all doing something is much better than doing nothing. Also, i think it might work..
arbaz.kagzi said:
if you have an unlimited plan then give it a go, after all doing something is much better than doing nothing. Also, i think it might work..
Click to expand...
Click to collapse
I have Tried Installing OH4 with ODIN but it Failed.
Even Flshing OJ5 Taiwan ROM Failed
try again with smart switch it might work..
arbaz.kagzi said:
try again with smart switch it might work..
Click to expand...
Click to collapse
At Last I got the Firmware and its Being Downloaded.
Will Update After Flashing
h-t-t-p://samsung-firmware.org/download/Galaxy%20Note5/4l5d/XME/N9208XXU2AOJ5/N9208OLB2AOJ3/
And PAC Firmware is also Available but its not free.
Have to Pay 6 Dollars.
did flashing new AOJ5 helped???
arbaz.kagzi said:
did flashing new AOJ5 helped???
Click to expand...
Click to collapse
Thanks for Your Help.
I really Appreciate It.
YES YES YES.
I got My Phone Back.
CodeNameRedNeck said:
I do not know about the pit file being included while using Smart Switch but I would sure give that a try. I have mentioned it to others as fix but they did not seem to be able to figure out how to use it correctly so I will list the procedure out for you and you can try and see.
Put your phone in Download Mode
Open Smart Switch on your PC
Click More in Smart Switch
Click Emergency software recovery and initialization
Click the Device Initialization tab
Type in your model number using caps for any letters in your model and using the dash where appropriate
Click Search
Type in your serial number again using caps for all letters
You will see a pop up saying that it can be initialized or something like that, click OK
A new pop up will tell you which version it will be initialized to
Click OK then it will start downloading some files
Another pop up will come up telling you how to enter download mode
Connect your phone to the PC and click OK
It will download the firmware from Samsung
If you followed those steps exactly it will work unless you really do need another pit file that Smart Switch does not provide but I do not see why it would not.
Good luck
Click to expand...
Click to collapse
What is the Serial Number?
I put IMEI / MAc , literally all the numbers on the box and it says wrong S/N number
Thanks
Related
Hy i tried to root my sm-m205fn and i ended with this error
kernel check fail device 2 binary 1 boot
i try all versions of odin with all factory firmware availlable for my region(from sammobile) i struggle for 5 days. i know that i need the firmware with U1.
I try with an old version of Smart switch it does recognize model but serial number is wrong seems that it doesn't exist on samsung database.
the phone is original not a clone.
seems i can't figure out what is wrong. i also try to put custom os from within twrp nothing works . please advice me because i don't have any idea .
sorry for my bad english. thanks in advance
tekken1979 said:
Hy i tried to root my sm-m205fn and i ended with this error
kernel check fail device 2 binary 1 boot
i try all versions of odin with all factory firmware availlable for my region(from sammobile) i struggle for 5 days. i know that i need the firmware with U1.
I try with an old version of Smart switch it does recognize model but serial number is wrong seems that it doesn't exist on samsung database.
the phone is original not a clone.
seems i can't figure out what is wrong. i also try to put custom os from within twrp nothing works . please advice me because i don't have any idea .
sorry for my bad english. thanks in advance
Click to expand...
Click to collapse
the phone was flashed with U1 but the device is U2 now kernel is corrupt sboot is corrupt ..... almost all files. need to erase all.
tekken1979 said:
the phone was flashed with U1 but the device is U2 now kernel is corrupt sboot is corrupt ..... almost all files. need to erase all.
Click to expand...
Click to collapse
SOLVED by myself this thread can be closed.
help me!
tekken1979 said:
SOLVED by myself this thread can be closed.
Click to expand...
Click to collapse
Don't close mate. Help me I need your help. Exactly same case i have explained it all here . Help me out brother. https://forum.xda-developers.com/galaxy-m20/help/help-t3986897
In short, I can't boot into anything.
You'll forever be my hero. Help me solve this thing bro.
Rooted.ndroid said:
Don't close mate. Help me I need your help. Exactly same case i have explained it all here . Help me out brother. https://forum.xda-developers.com/galaxy-m20/help/help-t3986897
In short, I can't boot into anything.
You'll forever be my hero. Help me solve this thing bro.
Click to expand...
Click to collapse
As i said in private message download the correct firmware and flash with odin
connect phone to laptop via usb cable. keep pressing Volume down and power till phone restarts then keep pressing both volume up and down till a blue screen appear then press volume up.
If flash fail then u use the wrong firmware look at this Letter and number when u look for firmware download.
I use the firmware name for SM-m205FN/DS for explanation
M205FDDU2BSH3
If the odin fail to flash the firmware search for U1 firmware even it's for another country i use my phone in Germany and the firmware is for India
PS. sorry for my bad english
tekken1979 said:
As i said in private message download the correct firmware and flash with odin
connect phone to laptop via usb cable. keep pressing Volume down and power till phone restarts then keep pressing both volume up and down till a blue screen appear then press volume up.
If flash fail then u use the wrong firmware look at this Letter and number when u look for firmware download.
I use the firmware name for SM-m205FN/DS for explanation
M205FDDU2BSH3
If the odin fail to flash the firmware search for U1 firmware even it's for another country i use my phone in Germany and the firmware is for India
PS. sorry for my bad english
Click to expand...
Click to collapse
Thanks Mate
Please I need help with manual update to android 9.
OTA keeps saying processing failed
Below is my device info
Product Code SM-N950UZVAXAS
PDA N950USQU4CRF3
CSC N950UOYN3CRF2
Baseband N950USQS5CRKI
Bootloader N950USQS5CRKI
Messrben said:
Please I need help with manual update to android 9.
OTA keeps saying processing failed
Below is my device info
Product Code SM-N950UZVAXAS
PDA N950USQU4CRF3
CSC N950UOYN3CRF2
Baseband N950USQS5CRKI
Bootloader N950USQS5CRKI
Click to expand...
Click to collapse
You cannot OTA update from Baseband N950USQS5CRKI. You need to manually flash the latest version using Odin.
MrMike2182 said:
You cannot OTA update from Baseband N950USQS5CRKI. You need to manually flash the latest version using Odin.
Click to expand...
Click to collapse
Tell me how please. Never done it
Messrben said:
Tell me how please. Never done it
Click to expand...
Click to collapse
It's quite simple.. You download the latest version of firmware for the device which is N950USQS6DSI3 after it's downloaded you need to unzip it one time and then boot the phone into download mode and connect it to the PC USB port and open Odin and put the files in their respective place and then flash.
MrMike good to see you bro
My SM-N950U Still Rooted Note 8
butchieboy said:
MrMike good to see you bro
My SM-N950U Still Rooted Note 8
Click to expand...
Click to collapse
Thanks bro! Nice to see you too! How are you doing? Everything alright? I sent my Note 10 back because I just can't stand certain features or LACK of features namely the notification light being gone and the screen protectors breaking the fingerprint scanner so.. I don't know what phone to even get at this point now.
MrMike2182 said:
It's quite simple.. You download the latest version of firmware for the device which is N950USQS6DSI3 after it's downloaded you need to unzip it one time and then boot the phone into download mode and connect it to the PC USB port and open Odin and put the files in their respective place and then flash.
Click to expand...
Click to collapse
I'm seeing different carriers (vzw, tmb, cct, usc,spr) except mine which ends in XAS. Which will work for me? Will any of these stop my device from supporting my sim??
Messrben said:
I'm seeing different carriers (vzw, tmb, cct, usc,spr) except mine which ends in XAS. Which will work for me? Will any of these stop my device from supporting my sim??
Click to expand...
Click to collapse
Doesn't matter they're all the same just choose whichever and flash it the phone will choose the correct information on it's own!
Are there update limits? I usually get a new phone, root it, find a rom I like and stick with it a long time. I recently updated many apps and they are not working right. Only google maps will get the location from the GPS for example. Also trying to get it to work with my new car radio (kenwood) with wireless mirroring and android auto. Anyway, as much as I like root, I am thinking it may be time to just update. I am currently at N950USQS2BQK2. Yeah way back. Can I odin a current like N950UOYN7DSK3 or do I have to go in steps? Also how do I get an unlocked USA from sammobile? Just pick a USA that doesn't list a carrier? Any other gotcha's since 2017?
Thanks,
Bob
Hi.
I have downloaded and installed by TWRP this BL file;
https://androidfilehost.com/?fid=4349826312261628198
That by mistake I wanted to install this other BL;
https://androidfilehost.com/?fid=11410963190603901376
And now it turns out that when I start I don't have IMEI. How can I solve it?
My device is a;
Samsung Galaxy Note 8 SM-N950F.
Android 8.
I have tried to install a 5-file ROM (BL, AP, CP, CSC AND USER DATA) and ODIN gives me FAIL. When the phone is in DOWNLOAD mode I get a red letter on the bottom that says; SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8. BINARY: 5.
Please help!!
D-Mak said:
Hi.
I have downloaded and installed by TWRP this BL file;
https://androidfilehost.com/?fid=4349826312261628198
That by mistake I wanted to install this other BL;
https://androidfilehost.com/?fid=11410963190603901376
And now it turns out that when I start I don't have IMEI. How can I solve it?
My device is a;
Samsung Galaxy Note 8 SM-N950F.
Android 8.
I have tried to install a 5-file ROM (BL, AP, CP, CSC AND USER DATA) and ODIN gives me FAIL. When the phone is in DOWNLOAD mode I get a red letter on the bottom that says; SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8. BINARY: 5.
Please help!!
Click to expand...
Click to collapse
When I have lost IMEI before, flashing stock filmware has resolved it for me.
You are getting that error in Odin as you are trying to flash bootloader 5 over bootloader 8. You can't downgrade the bootloader version. You need to download the latest filmware.
I take it you updated your phone in the last couple of days to be on bootloader 8. Just download that same filmware and it should flash fine.
stonedpsycho said:
When I have lost IMEI before, flashing stock filmware has resolved it for me.
You are getting that error in Odin as you are trying to flash bootloader 5 over bootloader 8. You can't downgrade the bootloader version. You need to download the latest filmware.
I take it you updated your phone in the last couple of days to be on bootloader 8. Just download that same filmware and it should flash fine.
Click to expand...
Click to collapse
It works now!
I have downloaded the last available ROM and I have flashed it with Odin and to start everything went well.
Thank you very much @stonedpsycho :good:
hi
I have Galaxy Note 8 - N950F DOUS , my mobile used to restart on its own two to three times a day, so I thought I need to change my present rom which was -{ [Note 8][OneUI Pie][JetBlackUI][06Apr-2020][v50] LightROM}so first I tried LineageOS17 but it did not install so I did a clean wipe and reflashed the Oneui Pie Light Rom again, I noticed no network so after checking the phone info I saw both my IMEI is showing NA , yes the problem of restarting did go but both my both -IMEI numbers are also gone, I reflashed it a few times but its same, I reinstalled my backup but still no IMEI, I tried everything I cannot get back my IMEI, I do have it on the box and back of my phone but I don't know what to do, any help please , its been three days my phone is dead no IMEI, please advice, I am not a phone expert just know basics, Please don't mind , if I have to install the original rom or something please , Please give me links. Thanks in advance. Guys please Help. oh, I installed it throw USB is that a problem ?
Samad.
zdarkstranger said:
hi
I have Galaxy Note 8 - N950F DOUS , my mobile used to restart on its own two to three times a day, so I thought I need to change my present rom which was -{ [Note 8][OneUI Pie][JetBlackUI][06Apr-2020][v50] LightROM}so first I tried LineageOS17 but it did not install so I did a clean wipe and reflashed the Oneui Pie Light Rom again, I noticed no network so after checking the phone info I saw both my IMEI is showing NA , yes the problem of restarting did go but both my both -IMEI numbers are also gone, I reflashed it a few times but its same, I reinstalled my backup but still no IMEI, I tried everything I cannot get back my IMEI, I do have it on the box and back of my phone but I don't know what to do, any help please , its been three days my phone is dead no IMEI, please advice, I am not a phone expert just know basics, Please don't mind , if I have to install the original rom or something please , Please give me links. Thanks in advance. Guys please Help. oh, I installed it throw USB is that a problem ?
Samad.
Click to expand...
Click to collapse
First off, did you back up your EFS folder before flashing a rom? You should always do this. If you did, try restoring the EFS with TWRP.
If that fails, flash stock filmware with Odin. The thread below gives you all the information you need to do this. At the end of post number 2, you can download Samfirm, this is an excellent program for Pc that will allow you to download the filmware much faster than a free SamMobile account or Updato.
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
stonedpsycho said:
First off, did you back up your EFS folder before flashing a rom? You should always do this. If you did, try restoring the EFS with TWRP.
If that fails, flash stock filmware with Odin. The thread below gives you all the information you need to do this. At the end of post number 2, you can download Samfirm, this is an excellent program for Pc that will allow you to download the filmware much faster than a free SamMobile account or Updato.
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
Click to expand...
Click to collapse
there is no backup of EFS, I just pressed backup and got three options then, - Boot, System and Data.
zdarkstranger said:
there is no backup of EFS, I just pressed backup and got three options then, - Boot, System and Data.
Click to expand...
Click to collapse
Try flashing stock filmware then, this will usually resolve this issue. All you need to know on how to do this is in the link I posted above.
stonedpsycho said:
Try flashing stock filmware then, this will usually resolve this issue. All you need to know on how to do this is in the link I posted above.
Click to expand...
Click to collapse
HI AGAIN I tried using Samfirm, I put in SM-N950F and Region Middle east as the country in phone is United Arab Emirates, but its asking to please verify input or use manual, but where can I find information for ( PDA, CSC AND PHONE ) and do I use Middle East ? thanks
zdarkstranger said:
HI AGAIN I tried using Samfirm, I put in SM-N950F and Region Middle east as the country in phone is United Arab Emirates, but its asking to please verify input or use manual, but where can I find information for ( PDA, CSC AND PHONE ) and do I use Middle East ? thanks
Click to expand...
Click to collapse
Leave it on auto, put the model number in the Model section, for region put XSG, which I believe is correct for UAE.
zdarkstranger said:
HI AGAIN I tried using Samfirm, I put in SM-N950F and Region Middle east as the country in phone is United Arab Emirates, but its asking to please verify input or use manual, but where can I find information for ( PDA, CSC AND PHONE ) and do I use Middle East ? thanks
Click to expand...
Click to collapse
ok got it ,Region - yes UAE is (XSG) Thanks again , downloading now .
stonedpsycho said:
Leave it on auto, put the model number in the Model section, for region put XSG, which I believe is correct for UAE.
Click to expand...
Click to collapse
Just I quick question, I can flash it in TWRP right ? or do I need Odin ?
Thank you so much .:good:
zdarkstranger said:
Just I quick question, I can flash it in TWRP right ? or do I need Odin ?
Thank you so much .:good:
Click to expand...
Click to collapse
Odin. You can also find the download for that in the thread link I posted to you.
stonedpsycho said:
Odin. You can also find the download for that in the thread link I posted to you.
Click to expand...
Click to collapse
Thanks you and I already have it installed. :good:
stonedpsycho said:
Odin. You can also find the download for that in the thread link I posted to you.
Click to expand...
Click to collapse
Hi man, am in trouble, that samfirm downloader is a pain, its downloaded more then one GB and stopped when i choose to append download it said connection lost , start again, happened 3 times and then I tried to download by Jdownloader from other sites, and I downloaded a firmware but it's not installing, I was using android 9 and maybe I downloaded android 8 , really internet has become hell, most downloads are scams and spam, anyway I don't know where to download the latest firmware, if you could please give me a link, terrible here because the internet is so slow I started download yesterday and today just got completed, sorry to disturb you but I really don't understand where to download the latest firmware from, thank you again.
zdarkstranger said:
Hi man, am in trouble, that samfirm downloader is a pain, its downloaded more then one GB and stopped when i choose to append download it said connection lost , start again, happened 3 times and then I tried to download by Jdownloader from other sites, and I downloaded a firmware but it's not installing, I was using android 9 and maybe I downloaded android 8 , really internet has become hell, most downloads are scams and spam, anyway I don't know where to download the latest firmware, if you could please give me a link, terrible here because the internet is so slow I started download yesterday and today just got completed, sorry to disturb you but I really don't understand where to download the latest firmware from, thank you again.
Click to expand...
Click to collapse
You can download from SamMobile, you will have to create a free account so you can download. I suggest using ADM (advanced download manager) as your internet is not good, it should let you carry on downloading if it gets interrupted.
Here is the filmware link (SamMobile is safe to use)
https://www.sammobile.com/samsung/galaxy-note-8/firmware/SM-N950F/XSG/download/N950FXXSADTB1/325565/
If the download in Samfirm stops at any point the download becomes corrupted, and you have to start again! So this way should be better for you (SamMobile)
stonedpsycho said:
You can download from SamMobile, you will have to create a free account so you can download. I suggest using ADM (advanced download manager) as your internet is not good, it should let you carry on downloading if it gets interrupted.
Here is the filmware link (SamMobile is safe to use)
https://www.sammobile.com/samsung/galaxy-note-8/firmware/SM-N950F/XSG/download/N950FXXSADTB1/325565/
If the download in Samfirm stops at any point the download becomes corrupted, and you have to start again! So this way should be better for you (SamMobile)
Click to expand...
Click to collapse
Thank you, I have a free account, but this site is very annoying, just does not allow free download, like force buy, that will never happen, I WILL buy another Mobile if I have to but will never pay to download from SamMobile site. :good:
zdarkstranger said:
Thank you, I have a free account, but this site is very annoying, just does not allow free download, like force buy, that will never happen, I WILL buy another Mobile if I have to but will never pay to download from SamMobile site. :good:
Click to expand...
Click to collapse
Maybe it has changed, I have not used it for a good while, you used to be able to download for free but at a very slow speed.
You could try Updato.com, but I'm not sure if it has the latest firmware.
stonedpsycho said:
Maybe it has changed, I have not used it for a good while, you used to be able to download for free but at a very slow speed.
You could try Updato.com, but I'm not sure if it has the latest firmware.
Click to expand...
Click to collapse
Thank you so much again, you are a great person, I got a super site, lets you download the ROm like free ans super fast, I used Jdownloader , I could not find proper ADM most were viruses as soon as it got downloaded the Antivirus blocked it saying virus. Anyway the download speed was 15. mb plus, and it installed and my IMEI is back, again I thank you so much.
I put up the link if anyone else needs to download the Firmware in the future. here's the link -
https://samfrew.com/download/Galaxy__Note8__/zfm4/XSG/N950FXXSADTB1/N950FOXMADTB1/
zdarkstranger said:
Thank you so much again, you are a great person, I got a super site, lets you download the ROm like free ans super fast, I used Jdownloader , I could not find proper ADM most were viruses as soon as it got downloaded the Antivirus blocked it saying virus. Anyway the download speed was 15. mb plus, and it installed and my IMEI is back, again I thank you so much.
I put up the link if anyone else needs to download the Firmware in the future. here's the link -
https://samfrew.com/download/Galaxy__Note8__/zfm4/XSG/N950FXXSADTB1/N950FOXMADTB1/
Click to expand...
Click to collapse
I apologise that ADV seemed to be a virus for you I won't recommend that ever again to someone. It seemed to work fine for Windows Defender...
Really glad you have fixed your issue though :highfive:
HI Friends,
Please help me to sort my Samsung Note 8 (SM-N950F) Sim not Detecting after 01-July-2020 Patch Update.
Factory Reset it but still the same.
Re-seat the the Sim Tray ,Tried Different sims but still have the same issue.
Please help me
Thank you.
Exactly same thing happened today.
Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.
sim not detected
Same issue with me. did all methods, but now stuck, have to wait for next update
poor update , same issue iv been stuck from 4pm once the update kicked in.
Service centre too closes early cos of the pandemic.
Avoid the update for the guys who havent updated it. July patch india
please help us to at least rollback.
isurues said:
please help us to at least rollback.
Click to expand...
Click to collapse
Have you tried flashing SCDTF1 FIRMWARE! That's the only firmware you can flash for now.
Look for either XEU OR BTU, don't worry about your CSC as long as you are using the multi-CSC OXM firmware your CSC will be supported.
Same issue here as well
Yes I did got same issue after update .... Contacted samsung but they dont have any solution .... pls keep all of us posted with the solution if any .... Actual problem is with IMEI number not displaying which prevents Network to come up .... this is what one of the samsung representative told me ....
Everyone pls keep posted for any update on this.
BluePhnx said:
Have you tried flashing SCDTF1 FIRMWARE! That's the only firmware you can flash for now.
Look for either XEU OR BTU, don't worry about your CSC as long as you are using the multi-CSC OXM firmware your CSC will be supported.
Click to expand...
Click to collapse
I have tried N950FXXSCDTF1_N950FOXMCDTF1_BTU from Sammobile.
then it will be SW REV. Check fail(Bootloader) error due to latest version of BL
vinaykdmp said:
Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.
Click to expand...
Click to collapse
try to flash ins firmware without csc (BL, Ap, CP).. phone will boot.. you can use with wifi... at least work without sim...
chanchal.shohel said:
try to flash ins firmware without csc (BL, Ap, CP).. phone will boot.. you can use with wifi... at least work without sim...
Click to expand...
Click to collapse
Tell me a thing if samsung will rollout an update for fixing this will sammobile get it at same time?
Can u explaing the process please
hainguyenthao said:
Just edit build.prop and flash AP file custom then it will be fixed no need to wait next update
Click to expand...
Click to collapse
Can u explain the process please
A new update has arrived. using samfirm to download it. Will update once I try Odin.
Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.
New update rolled out on Sammobile. have downloaded it, by paying 300rs. from paypal for fast download. phone is working fine. download the update of 29/07/2020.
Xda doesnt allow new users to post link. so u have to check on its page.
vinaykdmp said:
Same thing happened with me today.
I tried factory reset.
I also tried flashing latest rom using Odin but got system version mismatch error. device 11 binary 10
It's better to wait for next firmware update.
Can't even boot into recovery now.
Will get back if I get anything working again.
Click to expand...
Click to collapse
Your update section is functional? I can't even search for the updates, throws can't connect error!
Amijaz said:
Your update section is functional? I can't even search for the updates, throws can't connect error!
Click to expand...
Click to collapse
Have you updated? With the latest rom
---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------
kunal_07 said:
A new update has arrived. using samfirm to download it. Will update once I try Odin.
Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.
Click to expand...
Click to collapse
Thankyou for updating, really appriciated.
nickme36 said:
Have you updated? With the latest rom
---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------
Thankyou for updating, really appriciated.
Click to expand...
Click to collapse
Finally, flashed the latest fixed firmware. My eyes opened when the VoLTE icon appeared during the setup. Back to normal! Thank god.
kunal_07 said:
A new update has arrived. using samfirm to download it. Will update once I try Odin.
Edit: downloaded via samfirm and installed via odin. Back to normal!
ver N950FXXSDDTG5
no need to pay sammobile for fast speed. samfirm takes it directly from samsung server.
Click to expand...
Click to collapse
Can I do this at home without visiting service centre ??
Will I lose data after you apply this update ? I mean do I need to do factory reset to apply this latest update ??
Official process which Samsung told me to do
NOTE:-
We do not have confirmation regarding WILL DATA BE LOST OR NOT
STEP 1:-
Kindly follow these steps Phone should be in Switch OFF state, follow the procedure as below: Long press “Volume Down + Power Key + Bixby Key”
STEP 2:-
After warning message will be displayed as shown in above image. Press the Volume up button and device will go to same state as shown. Connect the phone to laptop/desktop via USB Cable.
STEP 3:-
Click on the link and download 2 files in one Folder https://www.mediafire.com/folder/o2u26wfcpdz68/
STEP 4:-
After that Install Smart switch application in laptop/desktop before proceeding further (https://www.samsung.com/in/support/smart-switch/)
STEP 5:-
Connect device with laptop/desktop using USB cable
STEP 6:-
Double click “N950FXXSDDTG5” exe file which is downloaded from the link
STEP 7:-
After that Tool will be opened as shown below. Click “Start” Button
STEP 8:-
If “Pass” is displayed on tool screen as below then device will return to home screen after some time.
has anyone tried this method? please let me know if its working
---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------
jazzydedania728 said:
NOTE:-
We do not have confirmation regarding WILL DATA BE LOST OR NOT
STEP 1:-
Kindly follow these steps Phone should be in Switch OFF state, follow the procedure as below: Long press “Volume Down + Power Key + Bixby Key”
STEP 2:-
After warning message will be displayed as shown in above image. Press the Volume up button and device will go to same state as shown. Connect the phone to laptop/desktop via USB Cable.
STEP 3:-
Click on the link and download 2 files in one Folder https://www.mediafire.com/folder/o2u26wfcpdz68/
STEP 4:-
After that Install Smart switch application in laptop/desktop before proceeding further (https://www.samsung.com/in/support/smart-switch/)
STEP 5:-
Connect device with laptop/desktop using USB cable
STEP 6:-
Double click “N950FXXSDDTG5” exe file which is downloaded from the link
STEP 7:-
After that Tool will be opened as shown below. Click “Start” Button
STEP 8:-
If “Pass” is displayed on tool screen as below then device will return to home screen after some time.
Click to expand...
Click to collapse
The link seems very fishy, should i trust this or report it.
SIM card not getting detected samsung note 8 SM-N950F
after the new update, for Samsung note 8 model SM-N950F
sim cards are not detectable,
IMEI number not available
not able to login to Samsung account
the software update on settings won't connect to Samsung servers now,
just wifi works,
Did factory reset, cleared all cache, no use, still the same.
plz any helps, i am stuck as i in a different country, none of the phones here as an issue, so they don't even know there is a problem,
---------- Post added at 06:49 PM ---------- Previous post was at 05:50 PM ----------
Rulinglionadi said:
has anyone tried this method? please let me know if its working
---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------
The link seems very fishy, should i trust this or report it.
Click to expand...
Click to collapse
thisssss workssssssss :good::good::good::good::good:
Hello there, I'm stuck with a situation and I can't fix the phone.
I live in Canada and I bought the phone here (Canadian software version and also unlocked) and gave it to a relative who lives in the USA to use. Recently, she has a firmware update notification from her phone, however, it always gets stuck at 28%, and the download fails. So she plugged the s10 device into her computer and used Smart Switch to download the new firmware. After she finished downloading it, she clicked to install the new firmware on her phone. That's when the problem starts... She got stuck on this screen forever and she even tried to soft reset/restart the phone but it just went back to that screen.
What I think happened was it's a Canadian version phone but the new firmware is the US version and it tried to install and crashed.
Could anyone give me some advice on fixing this problem?
jimyall said:
Hello there, I'm stuck with a situation and I can't fix the phone.
I live in Canada and I bought the phone here (Canadian software version and also unlocked) and gave it to a relative who lives in the USA to use. Recently, she has a firmware update notification from her phone, however, it always gets stuck at 28%, and the download fails. So she plugged the s10 device into her computer and used Smart Switch to download the new firmware. After she finished downloading it, she clicked to install the new firmware on her phone. That's when the problem starts... She got stuck on this screen forever and she even tried to soft reset/restart the phone but it just went back to that screen.
What I think happened was it's a Canadian version phone but the new firmware is the US version and it tried to install and crashed.
Could anyone give me some advice on fixing this problem?
Click to expand...
Click to collapse
youre gonna want to flash the FW with Odin. I can give further details if the solution i provided doesnt make sense
Youdoofus said:
you're gonna want to flash the FW with Odin. I can give further details if the solution I provided doesn't make sense
Click to expand...
Click to collapse
Could you please provide me more details? I'm not really a tech person >_>. Do I need to flash the FW with new Canadian version of FW? Also where can i download Odin from a trusted source?
jimyall said:
Could you please provide me more details? I'm not really a tech person >_>. Do I need to flash the FW with new Canadian version of FW? Also where can i download Odin from a trusted source?
Click to expand...
Click to collapse
for sure man, i sometimes skip the long winded Odin stuff because ive typed out like 3 paragraphs of Odin instructions and the person i was replying to already knew 75% of what i just typed LOL
aaaaanyways, downloading Odin from a trusted source isnt an issue. Ive downloaded soooo many versions of Odin over the years and from so many different places, i cant imagine an infected Odin. Im sure they exist, but ive never seen one. ive got Odin from here before, and it was fine. Also, yes, youd definitely want to download the canadian version of it. You should be able to flash the U1 version (fully unlocked) so long as you have a snapdragon processor, but youd need whats called "Patched Odin" to do it. The U1 thing is kind of a tangent, but youll find out that there are a TON of rabbit holes you can find yourself in from time to time. The best thing to do is to just flash the FW for the model of phone you own unless you plan on tinkering. sammobile.com/firmwares is where you want to search for the FW and samfirm is an exe youre going to want to use to actually download the FW itself. Samfirm downloads it literally 5x faster.
Youdoofus said:
for sure man, i sometimes skip the long winded Odin stuff because ive typed out like 3 paragraphs of Odin instructions and the person i was replying to already knew 75% of what i just typed LOL
aaaaanyways, downloading Odin from a trusted source isnt an issue. Ive downloaded soooo many versions of Odin over the years and from so many different places, i cant imagine an infected Odin. Im sure they exist, but ive never seen one. ive got Odin from here before, and it was fine. Also, yes, youd definitely want to download the canadian version of it. You should be able to flash the U1 version (fully unlocked) so long as you have a snapdragon processor, but youd need whats called "Patched Odin" to do it. The U1 thing is kind of a tangent, but youll find out that there are a TON of rabbit holes you can find yourself in from time to time. The best thing to do is to just flash the FW for the model of phone you own unless you plan on tinkering. sammobile.com/firmwares is where you want to search for the FW and samfirm is an exe youre going to want to use to actually download the FW itself. Samfirm downloads it literally 5x faster.
Click to expand...
Click to collapse
For the firmware, do I just download the latest one for Canada Version? There are so many links so do I just click on Canada (the one without Provider) and Do i download PDA or CSC or both? My phone is unlocked already btw. Also will i able to flash my phone even though it is currently stuck in the "BLUE SCREEN OF DEATH"?
I even tried to you the samfirm to download the firmware but it keeps saying authorization failed after I filled in the blank and clicked update.
Checking firmware for SM-G973W/XAC/G973WVLS4ETK1/G973WOYV4ETK1/SMG973WW12/G973WVLS4ETK1
Error: Could not send BinaryInform. Status code 200/401
Authorization failed
jimyall said:
For the firmware, do I just download the latest one for Canada Version? There are so many links so do I just click on Canada (the one without Provider) and Do i download PDA or CSC or both? My phone is unlocked already btw. Also will i able to flash my phone even though it is currently stuck in the "BLUE SCREEN OF DEATH"?
I even tried to you the samfirm to download the firmware but it keeps saying authorization failed after I filled in the blank and clicked update.
Checking firmware for SM-G973W/XAC/G973WVLS4ETK1/G973WOYV4ETK1/SMG973WW12/G973WVLS4ETK1
Error: Could not send BinaryInform. Status code 200/401
Authorization failed
Click to expand...
Click to collapse
yep. sorry, i forgot to mention that part. Zero worry tho, its just a thing caused by the bootloader that your phone was most recently on being too new for the FW youre trying to flash. Thats whats causing the binary error, the binary currently installed is greater than the one youre trying to install so the phone wont physically allow it. Its not even a software thing, it gets hard coded. Anyways, get the most current one and reflash. It wont fail again with the same reason on the newest firmware, but if it does fail, try a different cable, download the file again. it might have corrupted during the download. If youre not using patched Odin, you literally cant screw it up so badly you cant recover it
Youdoofus said:
yep. sorry, i forgot to mention that part. Zero worry tho, its just a thing caused by the bootloader that your phone was most recently on being too new for the FW youre trying to flash. Thats whats causing the binary error, the binary currently installed is greater than the one youre trying to install so the phone wont physically allow it. Its not even a software thing, it gets hard coded. Anyways, get the most current one and reflash. It wont fail again with the same reason on the newest firmware, but if it does fail, try a different cable, download the file again. it might have corrupted during the download. If youre not using patched Odin, you literally cant screw it up so badly you cant recover it
Click to expand...
Click to collapse
thanks you! I used Frija to download the latest Canadian version of the firmware. Next step do I just use the Odin to flash and follow the instruction on sammobile websites? Can I flash the new firmware without deleting data on my phone?
jimyall said:
thanks you! I used Frija to download the latest Canadian version of the firmware. Next step do I just use the Odin to flash and follow the instruction on sammobile websites? Can I flash the new firmware without deleting data on my phone?
Click to expand...
Click to collapse
yep, when flashing the 4 parts of the FW, the home_csc will not wipe your userdata, csc will factory reset. let us know if you run into trouble, but you shouldnt have any issues. it sounds like you got this
Thank you so so much! I fixed the phone and it works now. For future firmware updates, I have to do this every time? Is there any option that i can change my firmware permanently to the US version so that I can get auto-update on the phone instead of using ODIN every time?