Related
Note: I have searched the forums/google/youtube and done just about everything suggested.
I downloaded the SDK thinking my computer would notice the drivers ... it doesn't
I've installed, uninstalled, rebooted, power cycled, disonnected, reconnected, deleted, added etc... And Windows still does not recognize my Hero.
I don't know what to do now, as I thought I was going to just simply root and keep it moving, but I can't even get transfer contacts yet. Anybody have suggestions? Tips? Anything? I'm desperate here
Running: Vista x64
Make sure you download and install HTC Sync here and turn on USB Debugging on your phone by pressing menu, settings, applications, development, and check USB debugging. Also turn on unknown sources in the same menu in applications.
Dave2582 said:
Make sure you download and install HTC Sync here and turn on USB Debugging on your phone by pressing menu, settings, applications, development, and check USB debugging. Also turn on unknown sources in the same menu in applications.
Click to expand...
Click to collapse
I've done this too ... multiple times
Ok, try this link and download the htc drivers for the hero. When its looking for the drivers, browse for the location yourself and point it to the drivers that you downloaded (once you extracted it)
Dave2582 said:
Ok, try this link and download the htc drivers for the hero. When its looking for the drivers, browse for the location yourself and point it to the drivers that you downloaded (once you extracted it)
Click to expand...
Click to collapse
Sigh, tried this too. Windows just keeps telling me it cant find the driver - even when I direct it to the folder I've never had this happen with any other drivers I've installed
try removing the device in device manager and remove SDK and then go back through the steps of installing htc sync plug in your phone then run SDK
Kenpoman said:
try removing the device in device manager and remove SDK and then go back through the steps of installing htc sync plug in your phone then run SDK
Click to expand...
Click to collapse
Lol yea I've done that too. Maybe it's my system. I just plugged the damn thing in to my office computer and the phone recognized the USB, and on the computer I can see the mSD - none of which have happened on my system at home.
Thanks for all the help, if anybody else has suggestions feel free to keep em comin!
i have had problems with two of the four computers that I have it installed on.
both of them i think i used different versions of SYNC to get it to work but I can't remember.
Kenpoman said:
i have had problems with two of the four computers that I have it installed on.
both of them i think i used different versions of SYNC to get it to work but I can't remember.
Click to expand...
Click to collapse
I'd be happy to even get THAT far. My computer wont install drivers, my phone doesn't detect that its connected via usb, so I'm unable to mount. So there's no chance of even using SYNC yet lol. I guess I should be happy I didn't rush out to get that EVO just yet, cuz I'd kill over if I were having this problem with that phone. With the Hero, it's annoying cuz I can't transfer music or root yet.
The following accurately sums my emotional roller coaster the last 24hrs ...
... ... ... ... ... ...
I had a similar problem. First does you phone charge from the USB port? if not find a different USB cable. I have heard thicker is better but all the ones I have tried have charged it.
If it does charge but you can get Windows to recognize it as ADB then install PDAnet on your computer. You can find it with a google search. I got really frusturaded getting the drivers to work too, but PDAnet worked on the first try.
Fazulka said:
I had a similar problem. First does you phone charge from the USB port? if not find a different USB cable. I have heard thicker is better but all the ones I have tried have charged it.
If it does charge but you can get Windows to recognize it as ADB then install PDAnet on your computer. You can find it with a google search. I got really frusturaded getting the drivers to work too, but PDAnet worked on the first try.
Click to expand...
Click to collapse
I use the stock USB, which does charge it via any USB connection. However I notice that when I plug it into a system at work (Windows 7) the phone recognizes the USB connection and allows me to mount [I'm adding music I sent to myself this morning to the phone via this Win7 system]. Whereas the system at home the phone doesn't even see a USB connection present, so no mounting option. (I've tried all 4 USB ports on my personal laptop)
I'll DL PDAnet either tonight or tomorrow and see how this works. Thanks for the suggestion, and I'll keep you posted.
--off to find this XDA android app--
amorphouskev said:
I use the stock USB, which does charge it via any USB connection. However I notice that when I plug it into a system at work (Windows 7) the phone recognizes the USB connection and allows me to mount [I'm adding music I sent to myself this morning to the phone via this Win7 system]. Whereas the system at home the phone doesn't even see a USB connection present, so no mounting option. (I've tried all 4 USB ports on my personal laptop)
I'll DL PDAnet either tonight or tomorrow and see how this works. Thanks for the suggestion, and I'll keep you posted.
--off to find this XDA android app--
Click to expand...
Click to collapse
Pdanet is the only way my computer would recognize it also so that should work for u.
Papa Smurf151 said:
Pdanet is the only way my computer would recognize it also so that should work for u.
Click to expand...
Click to collapse
Didnt work. I kinda give up.
My phone only gives me the mount USB option when my PC is booting. As soon as I log in to windows that option goes away.
Sent from my HERO200 using XDA App
seriously try a to install a different version of sync first. i am using two different versions .
Kenpoman said:
seriously try a to install a different version of sync first. i am using two different versions .
Click to expand...
Click to collapse
Ok I've finally gotten the phone and computer to see each other. So I now have access to the SD card, however Vista still is not locating drivers.
Methods tried:
Installing, Uninstalling HTC Sync (various versions, new & old - including several reboots)
A tether program suggested in this thread
PDAnet
Directed Vista to folders with drivers.
Downloaded suggested drivers to Vista and pointed the system to particular folder
It's great that now I can take care of adding music etc... to the phone, but I had hopes of rooting as well, and it doesn't look like that's going to be a reality.
I'm still completely open to suggestions, and very grateful for all the assistance so far!
Since I just got this phone from asurion it's still on 1.5 would updating help? (I didn't want to update android for fear that I wouldn't be able to root, as I heard some update went out that prevented ppl from rooting)
-----------------
UPDATE:
I must have THE WORST Karma in the world, as soon as I posted this I stopped being able to see my SD card, and the phone keeps wanting to sync with HTC sync. No option to mount the USB anymore. I'm ready to bash my head and this phone repeatedly into a brick wall (after throwing my notebook off a balcony)
do you have sdk installed.
i had a hell of a time and ended up installing sdk in mydocuments instead of the root C:
again this is just one computer. my windows 7 machine was good from the start.
i haven't tried vista yet.
let me retrace my steps and see if i can help
this is also an option for rooting http://unrevoked.com/
i haven't tried it myself but you can download it to your phone and with a file explorer you can install it.
I've given up. This issue has made just pushed me completely away from Windows. I've realized that practically any USB device plugged in (except my old win mobile device) isn't recognized. Switching to Linux and hopefully a more compatible android experience.
Thanks for all the help!
Sent from my HERO200 using XDA App
My only thought (after having similar problems at work) is that there are still driver issues. I found a program called USBDeview that can be used to remove drivers left behind by other removal methods. It requires admin rights, so if you don't have those, sorry. If you still want to try, the program was a free download found using Google. Remove the drivers, reboot, and give it one more try.
Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
rahbert said:
Hello ppls.
I've read some similar threads about this problem, tried some solutions, didn't worked and they didin't really had my situation.
So lets begin. My phone isn't recognized by my computer of anysort. When i plug the device i get this error: Windows has stopped this device because it has reported problems. (Code 43) .Tried solutions for the error with no succes.
I run Windows 7 64 bit,4gb Ram, Intel Quad Core 2,2 Ghz. I downloaded the drivers for the device from samsung, bummer when i manually try to update the drivers and set the path to where the drivers are it says The device is already up to date,even with online search.
What i've tried so far:
1. Tried in normal condition with KIES. Debugging off.
2. Debuggind on. Same
3. Different PC with windows 7 32 bits, same error, same solutions that don't work
4. Updating .Net framework
5. Installing a program that automaticly detects drivers. It didnt even see it.
6. Checking the cable for corrosion or anything else faulty. Cleaned it even.
7. Yelling are the stupid phone !!
Thank you.
Click to expand...
Click to collapse
Have you tried with a different USB cable?
No because i connected succesfully my friends galaxy fit with it, so the cable is not the problem.
thry manualy installing galaxy s drivers on pc?
Uninstall and reinstall the drivers.
Try different drivers.
Make sure you're using a Samsung wrong with the Samsung drivers.
Use a different PC.
Keep trying!
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
rahbert said:
I gave up...I tried everything.Spent hours of searching forums and applying solution, nothing works... Tried On 3 different pc's. 1 with win 7 64bit, and the rest win 7 32 bit. I can't manually install the drivers either. Says there are already up to date when i set a location for the drivers to detect...I can't even use it as mass storage.
Click to expand...
Click to collapse
To try using different drivers you would need to uninstall the current driver.
And just to be sure, you didn't flash to CM7/MIUI recently, not realizing Samsung drivers won't recognize your phone anymore, right? Nexus S drivers for those ROMs.
Its on the original ROM i think. Recently bought it second hand, 1 year old.
I couldn't find different drivers...except 32 bit and 64bit, but they all are the same version. Maybe post a link or something. Mine are 1.4.4.
Firmware version: 2.3.3
Baseband version i9000XXJVO
Kernel Version: 2.6.35.7-i9000xwjvh - CL184813 [email protected] #Dark_core_2.4 Mon May 16 15:02:38 EEST 2011
Build Number: DarkyRom JVH v10.1
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
rahbert said:
SOLVED. The problem was from the ROM Darky 10.2. I went to a service did a resoft donno how they do it, installed me the original gingerbread 2.3.4 and now works like a charm!
Click to expand...
Click to collapse
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
upichie said:
Just for future reference, this site is filled with tutorials on how to do just that. In fact, that is what this site is all about—new ROMs, new ideas, and how to get them onto your device. Look around next time.
Click to expand...
Click to collapse
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
rahbert said:
Dude i'm not the kinda of guy that doesn't research first. Like i mentioned i tried everything i found with no effect. The thing is, the problem reappeared after a day, with the new rom. Took it back to the service, said its a virus from some apps i installed...Is it possible? Thing is, it worked even after i restored all my apps.
I couldn't change the rom either because neither Odin or Heimdall saw my phone, if that is what you reffered to. If you know how to resoft a phone without the pc recognizing it (not even as a composite USB device in download mode or debugmode) and just Showing in Odin or Heimdall "Unknown Device" and failed at installing ClockworkMod, be my guest and redirect me to the tutorial, or tell me how to do it.
Thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1347899
upichie said:
http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
rahbert said:
How can i use Mobile Odin if i can't root it?
Anyway the problem has been identified as the driver behind the usb slot of the phone, At least that what the guy at the service said...for the moment i'm waiting. I'll keep you posted.
Click to expand...
Click to collapse
Throw it against the wall then. You ask us for help, disregard all of it, and then update us on what the service desk told you. If you will only listen to them, then don't ask us, kay? Appreciated.
Hi, there.
Actully, the rahbert's question is not bad. How can i use Mobile Odin if i can't root the device?
Or, how can I root without PC? Is it possible? I have exactly the same problem:
Nexus S (I9020), ICS 4.0.4(stock). When I plug the device: the error is reported(Code 43).
Should I try wipe data/factory reset? I really don't want to do this, because there is another good question: How can I fully backup my data(Titanium and so on) without root access? Can you suggest me something? Thanks.
Herman76 said:
Have you tried with a different USB cable?
Click to expand...
Click to collapse
Changing the USB cable worked for me. Thanks!!
my samsung galaxy s is not recognized by my computer no matter what i do!
don't know why, i've done some research, no results.
i've installed Kies, which i assume already installs the drivers, but when i connect, the computer shows no sign of connection (it says that i need to update drivers in device manager??) i tried different USB ports, toggled USB debugging on/off, NOTHING WORKS
the reason i want my computer to recognize the galaxy is because i want to update it to android 2.3.5 via odin. but when i enter download mode, the computer doesn't recognize it. when i'm in the system, the computer STILL doesn't recognize it...???
please somebody help, it's rooted, running a different MIUI version (not the ones in xda dev section), i'm not sure where i got it from, but it's called an ENG_MIUI?
CM7 (and subsequently MIUI) is built from the Nexus S source code, so find the proprer drivers for it. "CM7 drivers" should be a sufficient google search. Also, Kies sometimes interferes while using the other drivers. If you run into any problems, uninstall Kies.
Okaham said:
my samsung galaxy s is not recognized by my computer no matter what i do!
don't know why, i've done some research, no results.
i've installed Kies, which i assume already installs the drivers, but when i connect, the computer shows no sign of connection (it says that i need to update drivers in device manager??) i tried different USB ports, toggled USB debugging on/off, NOTHING WORKS
the reason i want my computer to recognize the galaxy is because i want to update it to android 2.3.5 via odin. but when i enter download mode, the computer doesn't recognize it. when i'm in the system, the computer STILL doesn't recognize it...???
please somebody help, it's rooted, running a different MIUI version (not the ones in xda dev section), i'm not sure where i got it from, but it's called an ENG_MIUI?
Click to expand...
Click to collapse
To get your phone recognized you need nexus s drivers. But that won't help you get it recognized by kies.
You need stock firmware on your phone to get it updated through kies.
Sent from my GT-I9000 using xda premium
I have same problem previously. But it solved after I do this: while Kies open, select Tools then press Install driver.
thanks guys, but how would i go about doing that? the directions i found don't make any sense?
ndemin said:
I have same problem previously. But it solved after I do this: while Kies open, select Tools then press Install driver.
Click to expand...
Click to collapse
Just to clarify, this won't help you. Samsung uses Samsung drivers. Since you do not currently have Samsung firmware on your phone, this won't do you any good. As previously stated by two very informative posters, you will need the Nexus S drivers to recognize your phone.
And, also as previously stated by just an absolutely wonderfully helpful poster, if you do a simple google search you'll find exactly what you need. Try either Nexus S Driver, CM7 Driver, Nexus S CM7 Driver, or really anything else similar. You could also check the CM7 Wiki, as I'm sure there would be a link for them there. And finally, if you simply search XDA Developers, I'm sure you'd find plenty of posts with what you need.
Hopefully that helps.
thanks
now my computer can see it when it's in android, but why does it STILL not see my Galaxy S in download mode???
do i need another set of drivers? (it said driver not found)
BTW THANKS GUYS!!! sorry if i'm being annoying
hello??
anybody??
Well did you install the Nexus S drivers yet?
upichie said:
Well did you install the Nexus S drivers yet?
Click to expand...
Click to collapse
yes, the nexus s drivers are installed, but i STILL can't connect through download mode...
try different computer, install samsung driver then connect your phone
still doesn't work???
Well, it seems to be a driver issue!
Try these (32-bit windows) but make sure that you are having a fresh win7 installed just in any case that your reg got corrupted with drivers (Ime ).
Still not working,then try on another pc..!
---------- Post added at 07:12 AM ---------- Previous post was at 07:06 AM ----------
upichie said:
Just to clarify, this won't help you. Samsung uses Samsung drivers. Since you do not currently have Samsung firmware on your phone, this won't do you any good. As previously stated by two very informative posters, you will need the Nexus S drivers to recognize your phone.
And, also as previously stated by just an absolutely wonderfully helpful poster, if you do a simple google search you'll find exactly what you need. Try either Nexus S Driver, CM7 Driver, Nexus S CM7 Driver, or really anything else similar. You could also check the CM7 Wiki, as I'm sure there would be a link for them there. And finally, if you simply search XDA Developers, I'm sure you'd find plenty of posts with what you need.
Hopefully that helps.
Click to expand...
Click to collapse
Well, CM7 drivers won't help SGS to get recognized on PC on DLD mode, you need another set of drivers and not those Nexus S's. I had the above ones installed on my PC (Google's your Best friend ) .
I had to install the drivers manually,
Right click on computer, click manage -> device something -> find your device in the list, select to update driver, search manually and enter the path to your android sdk and search.
Worked like a charm to me
Sent from my GT-I9000 using XDA App
pzayx said:
I had to install the drivers manually,
Right click on computer, click manage -> device something -> find your device in the list, select to update driver, search manually and enter the path to your android sdk and search.
Worked like a charm to me
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
computer could see device in download mode?
hi
i had same problem, but computer recognize the device as "unknown device"
in all modes, developed, storage etc...
i am close to think thats is problem of internal usb driver of the rom
want to downgrade from de device, whitout usb, but i dont know how do it, because i am not root, and its no possible in 2.3.4 whituot usb.
thanks
I had a lot of similar issues with my I9000, too.
Tried everything on ROM and driver side also on different computers.
Finally it turned out that my Micro USB connector was corroded.
I have around 30 people in our company that have the same phone, and 5 of them had similar issues. I guess it's a common problem with this device.
I took a toothpick and cleaned the contact of the connector by sliding it up and down for a couple of million times. This also did the trick for my colleagues.
I think it's at least worth to try it.
Good luck
i try to clean the contact, but still cant connect to the computer.
I wonder if a method of degrading the system with a signed rom from the recovery, without using the USB cable or ODIN.
i have a same problem. Any new solution?
snbmf said:
i have a same problem. Any new solution?
Click to expand...
Click to collapse
use this guide
Check this out! Links to useful Guides and " Banned " Documentaries
Well, my problem is that my phone won't recognize any computer as a computer, but only as a source for battery charging. when i plug it into a computer the battery starts charging but i don't get the USB sign.
the thing is that it used to work. i usually just pluged the phone in and it would work, and suddenly out of the blue it stopped working and i have no idea why. i've done nothing on the computer between the last time it worked and the time it stopped working, i wasn't even using the computer during that time, so it must be something on the phone settings, but i checked it a little and found nothing that looks like the problem, but i rly don't understand much about it..
any ideas?
It sounds like a driver issue.
If you're using a Samsung firmware, reinstall the drivers. This can be done by finding them online, or by installing Kies. If you're using CM7/Miui, Samsung drivers won't work. You'll need to uninstall Kies (or kill the process to make sure it's not running in Task Manager) and then install the Nexus S drivers. Again, a simple search will provide the files you need.
If it's not a driver issue, I really don't know what it could be. But I would definitely try reinstalling the appropriate drivers first.
Go to Settings>Applications>Development and if USB debbugging is flagged,deflag it!
upichie said:
It sounds like a driver issue.
If you're using a Samsung firmware, reinstall the drivers. This can be done by finding them online, or by installing Kies. If you're using CM7/Miui, Samsung drivers won't work. You'll need to uninstall Kies (or kill the process to make sure it's not running in Task Manager) and then install the Nexus S drivers. Again, a simple search will provide the files you need.
If it's not a driver issue, I really don't know what it could be. But I would definitely try reinstalling the appropriate drivers first.
Click to expand...
Click to collapse
I'm using a samsung firmware and i installed kies recently, though even after i installed it, the USB connection was still working for i while until it stopped.
should i reinstall the kies?
Nezys said:
Go to Settings>Applications>Development and if USB debbugging is flagged,deflag it!
Click to expand...
Click to collapse
It was deflagged, but thanks anyway
abialystok said:
I'm using a samsung firmware and i installed kies recently, though even after i installed it, the USB connection was still working for i while until it stopped.
should i reinstall the kies?
It was deflagged, but thanks anyway
Click to expand...
Click to collapse
Try with a different USB cable.
Sent from my GT-I9000 using Tapatalk
Try to reinstall Kies or one of the steps that I've read here:
http://www.androidgalaxys.net/suite...problemi-connessione-collegamento-usb-galaxy/
Translated:
Make sure you have installed the latest version of Kies (currently 2.0.1).
For owners of Windows Vista / Seven Kies launch in admin mode
Connect your phone to your PC using the default launcher from Samsung (TouchWiz). Alternative launcher may not be recognized by Kies. Close any programs in the background on your phone and PC.
Make sure that in Settings> Wireless and Networking> USB Settings is selected Samsung Kies or Ask the connection.
If you already selected, try to choose any item and then set one of the two mentioned.
Try using another USB port on PC. Not all USB ports may be able to deliver the power needed to power the device.
Restart both the phone and your PC.
Try reinstalling the drivers of the Galaxy. To do this open Kies, go to the Tools menu and then install drivers.
Try using another USB cable.
ok, I tried everything but switching cable coz i know it works...
here's the weird thing: I tried connecting my phone to 3 different computers, 1 worked and the other 2 (including mine) didn't work.
the thing is that the other computer that didn't work and the computer that did work never touched a Samsung before, so basicaly i have no idea what would make one of them work and the other not to work.
I'm really confused.
Try going into device manager and see if there are any devices flagged with '!'
If not, find your samsung device from device manager, and uninstall it and delete all drivers, then reinstall them.
Try that. It may just be a windows issue, I've had similar problems before but not even with a phone, but a flash drive.
well, tonight the computer restarted itself because of some updates, now it seems to magicaly work, even though i restarted it before.
i have no idea y it suddenly started working, but i can only hope it wouldn't happen again.
thank you all, you guys are great!
Hi, guys! I have a really big problem :/. Right now I'm using the stock 2.3.4 gingerbread from LG ,but you all know that this is the worst OS ever. I wanted to get rid of it but i cant connect my device to the computer. It's only charging. I need a way to root it w/o usb connection. Do u have any suggestions? It's not a software problem! Something inside the phone is broken and i don't know what it is. Is there a way to root it via bluetooth or SD card? I didn't find any apps to root it too. I know gingerbreak etc, but they dont work for 2.3.4. Thank you in advance and i hope there is a solution. :fingers-crossed:
I am afraid you can't. Replacing your micro usb port could solve your problem. I reccomend to buy a micro usb port which is already on the flexible cable so you can avoid ironing.
Sent from my LG-P990 using xda app-developers app
So i'll need this? I asked a staff member in a service station and he said that the port isnt broken. So i need the whole thing port+flexible cable? Is that what i should do? Thanks alot. Ohh man i cant post links still: http:___//i.ebayimg.com/t/LG-G2X-Optimus-2X-P990-P999-Micro-USB-Charging-Port-Flex-Cable-Repair-Part-/00/s/OTU1WDE0MDI=/z/unUAAOxy9DRSAoTf/$T2eC16R,!wsE9suwycosBS!oTe7+VQ~~60_57.JPG
stupid question: did you try another usb cable or usb port?
Yeah, dude. Of course. I've tried different settings like usb debugging on/off too but still nothing.
here are some articles you might want to check out regarding usb connection
http://www.birdiesync.com/my-android-device-cannot-connect-over-usb
http://www.droidxforums.com/forum/chevyno1/31975-usb-charge-only-ssx.html (2nd post reply)
i forgot how the mass storage settings in gingerbread look like but there should be an option to put the phone in "charge only" mode (which you should disable)... pressing menu key in settings > storage doesn't give you any options to choose?
In gingerbread you can only turn usb mass storage and usb debugging on/off. These settings didn't help. I'll read more about the first link you gave me and try it out.
peetyo040497 said:
In gingerbread you can only turn usb mass storage and usb debugging on/off. These settings didn't help. I'll read more about the first link you gave me and try it out.
Click to expand...
Click to collapse
This is quite challenge, root without usb connection. First idea I got to use ADB over WiFi, but this is available from ICS, not on GB.
Second idea - what I remember, some of root methods use APK installation over ADB by script. Maybe you can search for these script methods and place all required files on SD Card. Then try to execute commands by terminal on device itself to install and root.
It's just my idea, maybe wrong, maybe help.
peetyo040497 said:
So i'll need this? I asked a staff member in a service station and he said that the port isnt broken. So i need the whole thing port+flexible cable? Is that what i should do? Thanks alot. Ohh man i cant post links still: http:___//i.ebayimg.com/t/LG-G2X-Optimus-2X-P990-P999-Micro-USB-Charging-Port-Flex-Cable-Repair-Part-/00/s/OTU1WDE0MDI=/z/unUAAOxy9DRSAoTf/$T2eC16R,!wsE9suwycosBS!oTe7+VQ~~60_57.JPG
Click to expand...
Click to collapse
Yes that is what you need if you have to replace your USB port but you don't have skills to replace only the usb port.
You can try gingerbreak to root your phone, but it maybe won't work.
bitdomo said:
Yes that is what you need if you have to replace your USB port but you don't have skills to replace only the usb port.
You can try gingerbreak to root your phone, but it maybe won't work.
Click to expand...
Click to collapse
Gingerbreak works on devices with android 2.3.3 and lower. Anyways I've tried it but it didn't work.
p.valenta said:
This is quite challenge, root without usb connection. First idea I got to use ADB over WiFi, but this is available from ICS, not on GB.
Second idea - what I remember, some of root methods use APK installation over ADB by script. Maybe you can search for these script methods and place all required files on SD Card. Then try to execute commands by terminal on device itself to install and root.
It's just my idea, maybe wrong, maybe help.
Click to expand...
Click to collapse
I'm not aware of ADB and scripting. Can you give me sоme guidelines?(I'm sorry 'bout my english. I hope you understand)
p.s. I found some info about ADB. So you need ADB to control your device via commands, but you can use ADB on your computer? You say that i have to find a way to use ADB on my phone so it controls itself and roots?
peetyo040497 said:
I'm not aware of ADB and scripting. Can you give me sоme guidelines?(I'm sorry 'bout my english. I hope you understand)
p.s. I found some info about ADB. So you need ADB to control your device via commands, but you can use ADB on your computer? You say that i have to find a way to use ADB on my phone so it controls itself and roots?
Click to expand...
Click to collapse
sorry to hear about your problems but just a simple question here have u tried another computer ? i had this problem with my nexus when i connect it to the pc i couldn't transfer my stuff to it but adb worked, but when i took it to another computer both mtp and adb worked
Yes, I've tried another pc's port and it didnt find my device too. My issue isn't the same i mean that my computer doesn' recognize the phone. There are no messeges that appear on the device or computer.
peetyo040497 said:
Yes, I've tried another pc's port and it didnt find my device too. My issue isn't the same i mean that my computer doesn' recognize the phone. There are no messeges that appear on the device or computer.
Click to expand...
Click to collapse
peetyo maybe your cable isn't good and did you try to install lg drivers?
check also by device manager or computer management or a device is appeared
Sent from my LG-P990 using xda app-developers app
winstonxl2 said:
peetyo maybe your cable isn't good and did you try to install lg drivers?
check also by device manager or computer management or a device is appeared
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Guys, the problem is not in the computer nor in the cable, it's in the phone. I'm 99% sure that it's a hardware problem. So i need to find a way to root or flash it without using usb connection.
i'm somehow sure that the real problem here is the device driver installation on your PC/Windows, not the phone...
btw which windows version are you using?
did you try checking out the AIO tool thread?
http://forum.xda-developers.com/showthread.php?t=2020737
60nine said:
i'm somehow sure that the real problem here is the device driver installation on your PC/Windows, not the phone...
btw which windows version are you using?
did you try checking out the AIO tool thread?
http://forum.xda-developers.com/showthread.php?t=2020737
Click to expand...
Click to collapse
Win 8 currently.
How would this thread help me?
I'll try installing the drivers on this laptop cause i''ve tried before on a one with xp.
P.s. With the drivers reinstalled on win 8 it doesnt work. As i said i've tried different computers, different cables and different setting.
peetyo040497 said:
Win 8 currently.
How would this thread help me?
I'll try installing the drivers on this laptop cause i''ve tried before on a one with xp.
P.s. With the drivers reinstalled on win 8 it doesnt work. As i said i've tried different computers, different cables and different setting.
Click to expand...
Click to collapse
if you read the 1st post, you might find out how could it help you... especially if you use win 8 which caused problems for many other users when trying to install the drivers or trying to flash the phone...
I - Install APX (NVFlash Recovery) Drivers if not already installed.
It starts the windows device driver wizard to help you install the drivers needed for NVFlash. It detects your system OS and gives additional on-screen instructions needed if your PC is running Windows 8.
FYI: The drivers are located under ToolKitFiles\nvflash\driver folder.
Click to expand...
Click to collapse
60nine said:
if you read the 1st post, you might find out how could it help you... especially if you use win 8 which caused problems for many other users when trying to install the drivers or trying to flash the phone...
Click to expand...
Click to collapse
I use windows 8 from a week. Anything i've done before was on a xp/ win 7. The problem isnt in the win 8 i use now. I've tried everything on my xp laptop. I have a friend who has the same phone and he can connect it to his computer so everything is fine with his computer. I've tried to connect my optimus to his computer and again it wasnt found by the computer. The problem must be in my device.
I'll try installing the APX drivers.
peetyo040497 said:
I use windows 8 from a week. Anything i've done before was on a xp/ win 7. The problem isnt in the win 8 i use now. I've tried everything on my xp laptop. I have a friend who has the same phone and he can connect it to his computer so everything is fine with his computer. I've tried to connect my optimus to his computer and again it wasnt found by the computer. The problem must be in my device.
I'll try installing the APX drivers.
Click to expand...
Click to collapse
u said that u wanted to get rid of the lg gingerbread software, and for that u dont really need to root, u could use the all in one toolkit and flash the new unlocked bootloader with cwm or twrp and install the new bootloader rom u want its as easy as that