I have flashed all the 6.0 roms so far and the new baseband and radio recently along with the qualcomm new drivers and i get a black screen everytime i make a call goes dark and i need to select power button to end call. Is there a link for the right solution or baseband and bootloader? Im running 27r
Related
Hi guys...
I've a problem (and i think i see this problem with same reasons on other problem that mine)
However, i tried each of ROM on my GS device, and each ROM working perfectly in first time, but after i saw any sensors are not working. Accelerometer, commpass, light sensor etc.
If you clikc the link (please see top) you can see my Voice Call problem, i think this problem is same this (so light and nearrest sensor not working and so my screen is not turn to on (lighting)
Anybody have an idea?
I was remember only one detail;
I installed SBL version of this firmware without check Phone Bootloader Update... and i think works fine...
But later i installed same version but with check Phone Bootloader Update...
Some professionals are there ? I think if this is an bootloader problem, how i can get my clear bootloader with JVK, if not what is the problem?
I don't know why but...
I reinstalled the JVK / SBL version, with out Phone Bootloader Update check (so noy checked).
Now all sensors are works perfectly...
I think, problem is checked Phone Bootloader Update
or
Rooting with CF JV1
I'm not sure so i'm very tired, i can't install and crash my device again
Hi there,
the proximity sensor on my i9000 isn´t working anymore. Everytime I place a call/get called the screen turns black and freezes. I have to pull the battery and restart it.
Testing the sensor on the LCD-test the screen turned green and the i9000 startet vibrating. Here, too only pulling the battery made it stop.
Here is what I tried so far:
- flashing different stock fw (Android 2.2 / 2.3.x)
- applied handicapped settings
- Using Proximity_Screen_Off App and Sanity-App on stock fw
- blowing air into the USB jack/vacuuming the jack
- opened the device to mechanically clean the sensor
All of the above failed!
The only way I can get it to work is when running android 2.3.7 Joker´s MiUi and run the Proximity_Screen_Off App.
Are there any other suggestions as to what can be tried?
Else I will have to get a new motherboard, because wouldn´t want to be restricted to using only one particular rom.
Any input is greatly appreciated
Thanks Christine
if i recall good (but kill me ive drinked some atm) the greensih issue was showing with voodoo color kernels and all the sensor peoblems came with badly assembled kernel.
so i would advice you to reflash pure 3 file firmware (repartition pit and all that jazz)
and if your sensors still would not work just reflash to your carrier or stock formware for your region and push it to repair center with proper dwscription (do no mentions miui or other crap)
Thanks for answering!
I flashed 3-part firmware, pretty much everything available and a CF-Root kernel.
So it couldn´t have been a bad kernel.
Can´t take it back to service, no warranty left.
I just flashed 2.3.5 and CF-Root and now I am fooling around with it some more.
I just think it´s weird that it would work with that and only that MiUi.
impossible unless youve got some other galaxy variaant than i9000
Hi everyone I have an HTC VIVID with S-ON i put miui 2.9.14 and my sound volume is extremely low especially the in call volume also my gps doesn't work like the Google maps navigation or maps cant connect the gps either does anyone have a solution to the sound or gps issue?
Try to reflash the Rom and try different kernels sometimes helps also.
I've tried everything every time I install a new kernel it either knocks out my wifi or gets stuck on the white htc screen anyone with any ideas?
Nenita25 said:
I've tried everything every time I install a new kernel it either knocks out my wifi or gets stuck on the white htc screen anyone with any ideas?
Click to expand...
Click to collapse
Which kernels have you tried? And have you performed a full wipe/re-install of the rom for each different kernel you have tried?
Where did you find this version of MIUI? I'd like to try it out...
ive tried every kernal there is for htc vivid an nun work they just not out my wifi or my phone doesnt turn on all the way at all
i got my miui from here http://miuiandroid.com/community/th....androidfilehost.com/?a=show&w=files&flid=611
Nenita25 said:
Hi everyone I have an HTC VIVID with S-ON i put miui 2.9.14 and my sound volume is extremely low especially the in call volume also my gps doesn't work like the Google maps navigation or maps cant connect the gps either does anyone have a solution to the sound or gps issue?
Click to expand...
Click to collapse
When having unfixable problems sometimes the only thing that will work is returning to stock. Relock and start all over from the very beginning.
Sent from my HTC Holiday using Tapatalk 2
Nenita25 said:
Hi everyone I have an HTC VIVID with S-ON i put miui 2.9.14 and my sound volume is extremely low especially the in call volume also my gps doesn't work like the Google maps navigation or maps cant connect the gps either does anyone have a solution to the sound or gps issue?
Click to expand...
Click to collapse
I just installed MIUI 2.9.29 on my Bell Raider (which has a current base of the Rogers ICS RUU). I am S-OFF so I'm sure the kernel flashed fine as part of the rom install, but I went into Settings/About Phone to confirm. It says it is running the faux kernel it comes with (3.0.33-MSM8660-Faux123-v007+)
- Call volume is just fine for me and when it is in Speaker mode it goes pretty loud! However - It doesn't seem to do LTE (dealbreaker for me). I checked the APN. It had everything correct. I only get HSDPA. I even went into the special phone menu and the choices were only GSM or WCDMA (no LTE items listed).
- GPS also seemed to work fine for me. I installed Google Maps from the market, launched it, the GPS icon started flashing in the notification bar, and it detected my exact location pretty quickly.
- The gallery and music player showed duplicates of each photo/song for me. Strange!
I still wonder if it's a kernel issue you're having. When you do a fresh flash of MIUI, and boot into it, go into Settings/About Phone, scroll down, and check what it says for Kernel Version. Also, if you go to flash a different kernel manually via fastboot (immediately after a fresh install of the rom), go into that same menu and see if the kernel you flahed is listed.
If the kernels don't seem to be flashing, I wonder if your phone has to experience an 'insecure' kernel flash first (this can be done by flashing Kozmik's 'stockish' kernel via fastboot). I'm not sure if this even applies to S-ON phones though...
I do agree with drwario though - starting fresh from scratch (re-locking bootloader and running your specific stock ICS RUU) is a good idea.
you are s-on? sounds like what happens when you dont flash kernel correctly. try to flash the kernel using fastboot and see if it fixes it
Relock your bootloader then reflash it to stock with no interruptions then just go back unlock the bootloader and reflash your Rom make sure that if u are s-on to flash the kernel.via fastboot
Sent from my GT-I9300 using xda premium
Title says all, i have already re-flashed and checked the md5 to make sure it wasn't a bad flash...
I wish i would have backed up my original BL ever since i flashed the OA1 BL i have had screen flickering issues and have to push my power button 5 to 12 times in a row to tun the screen ON from waking up..
The screen will flicker really bad when i set it to low dim but bump it up and it works fine.. When i'm actually using the phone it works flawless no screen issues but run into trouble every single times when i try to turn the screen ON from a wake.
That's why i believe it's not a hardware issue. it's something in the firmware not working correctly in my revision model of the g900a.
Can i please get some new boot loaders to try out that someone might have???
I will try anything at this point i really need some help!
Bootloader Version:
G900AUCU2AOA1
Specs: G900A / Kit Kat 4.4.2 Stock
Thank you a lot,
-JBriZzeL
hello:
yesterday i flashed g920t with kies , it updated to latest firmware , G920TUVU4EPF1, i think
the touchscreen become left-right inverted , like if i touch left side , it respons on right side of screen ...
i tried to downgrade but it seems couldn't be done ,even the TWRP recovery has same problem that touchscreen is inverted...
any help please ?
never mind , problem solved.
solution post here in case anyone else who run into same problem.
1.back to stock rom
2. in call dial, press *#2663#
3. press TSP FW update (General)