Related
Help! I successfully rooted my Kindle Fire HD 7" following your tutorial "[ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version", and then installed Google Plays etc. following "[ROOT][HOW TO] Install Google Play Store Noob (Simple) Version". I then got to the "[How to] Install Go Launcher EX and HD Noob (Simple) Version" tutorial, and everything went down hill from here.
After following the instructions of tutorial 3, and error message popped on my screen saying that "October has Stopped" and my device froze. I held down the power button, but my device wouldn't boot up - instead it went to a screen with a "Red Warning Triangle". I tried everything from this screen to reboot/reboot my device, all to no avail. Eventually the battery died.
I was able to my Kindle Charged again using the wall charger. However, when plugging into my computer via USB, it doesn't appear on my list of devices. Thus, tools such as KF First Aide are of no help; they cant't communicate with my device, and get stuck on the "<waiting for device>" message.
Any advice?
Can I fix this? How Is my Kindle Fird HD 7" dead forever?
dim_opoulos said:
Help! I successfully rooted my Kindle Fire HD 7" following your tutorial "[ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version", and then installed Google Plays etc. following "[ROOT][HOW TO] Install Google Play Store Noob (Simple) Version". I then got to the "[How to] Install Go Launcher EX and HD Noob (Simple) Version" tutorial, and everything went down hill from here.
After following the instructions of tutorial 3, and error message popped on my screen saying that "October has Stopped" and my device froze. I held down the power button, but my device wouldn't boot up - instead it went to a screen with a "Red Warning Triangle". I tried everything from this screen to reboot/reboot my device, all to no avail. Eventually the battery died.
I was able to my Kindle Charged again using the wall charger. However, when plugging into my computer via USB, it doesn't appear on my list of devices. Thus, tools such as KF First Aide are of no help; they cant't communicate with my device, and get stuck on the "<waiting for device>" message.
Any advice?
Can I fix this? How Is my Kindle Fird HD 7" dead forever?
Click to expand...
Click to collapse
Yes you can fix it,In Fact, You need to have done a lot worse than that to completely fry your kindle, Don't worry, But you will need a factory cable now, Do you have one?
If you don't you can either
A) Order one from SkOrPn
B)Make one yourself, It's easy if you know how to solder
Once you acquire i'll tell you how to completely restore your kindle!
Yes he is right. You can order a factory cable from prokennexusa by PM.
Sent from my KFTT using xda app-developers app
AmrBanawan said:
Yes you can fix it,In Fact, You need to have done a lot worse than that to completely fry your kindle, Don't worry, But you will need a factory cable now, Do you have one?
If you don't you can either
A) Order one from SkOrPn
B)Make one yourself, It's easy if you know how to solder
Once you acquire i'll tell you how to completely restore your kindle!
Click to expand...
Click to collapse
Thanks. I am ordering a factory cable asap. Once it arrives, however, what do I so then?
If u got any Samsung chargers laying around its very easy to make one without solder
Sent from my KFTT using xda premium
dim_opoulos said:
Thanks. I am ordering a factory cable asap. Once it arrives, however, what do I so then?
Click to expand...
Click to collapse
The simplest tool that can restore your kindle would be
KFHD System.img Restore Tool KFHD SRT
All you need to do is download this tool
KFHD_SRT_v1.2.3- 7.2.3
This is a large download, System images are ~600Mb
Originial Thread
http://forum.xda-developers.com/showthread.php?t=1951254
Open SR Tool.bat
choose option 1
Or option 2 if you would like to have Go launcher or Apex launcher installed along with it, And google play store!
The tool will send the system image to your kindle, This will take about 7 minutes
Next, you should choose option 3 to wipe cache and userdata, This is recommended but not required, You will lose any files you transferred to your kindle, You don't need to do this if you want to keep your files!
If you need help just ask
:good::good:Good Luck:good::good:
UPDATE
I wanted to update everyone on my situation. I followed the threads advice - and it worked!
Specifically:
1. I ordered a factory cable from SkOrPn - got it in 3 days after placing order (shibby!).
2. I charged my device by plugging it into wall charger.
3. I installed the Kindle Fire ADB drivers on my compter - directions and links can be found on the thread [ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version
4. I installed the toolbox KFHD_SRT_v1.2.3- 7.2.3 - from the thread KFHD System.img Restore Tool KFHD SRT
5. I plugged my device into PC USB port using the factory cable - it immediately went into fastboot.
6. I used KFHD_SRT_v1.2.3- 7.2.3 from my pc (SR Tool.bat), followed the instructions, and presto.
dim_opoulos said:
I wanted to update everyone on my situation. I followed the threads advice - and it worked!
Specifically:
1. I ordered a factory cable from SkOrPn - got it in 3 days after placing order (shibby!).
2. I charged my device by plugging it into wall charger.
3. I installed the Kindle Fire ADB drivers on my compter - directions and links can be found on the thread [ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version
4. I installed the toolbox KFHD_SRT_v1.2.3- 7.2.3 - from the thread KFHD System.img Restore Tool KFHD SRT
5. I plugged my device into PC USB port using the factory cable - it immediately went into fastboot.
6. I used KFHD_SRT_v1.2.3- 7.2.3 from my pc (SR Tool.bat), followed the instructions, and presto.
Click to expand...
Click to collapse
How long did it take your kindle to charge? When I plug mine in the wall charger it only turns on for like 5 seconds and that's about it? Also did you use the factory cable to charge or the usb cable that came with the Kindle?
bricked .. red screen
I was able to root my KFHD7 with Root_with_Restore and then Qemu .. rooting seemed to work fine.
I then tried to use Fire Flash app to load Hashcode's freedom boot image and TWRP recovery image.. clicked the flash button, it rebooted to a red screen.
I made myself a fastboot cable, when I plug it in, I see the Fastboot logo on the kindle, but my PC never detects the device.
Not sure where to go from here.
I've downloaded and tried KF2_SRT tool and no go. Also downloaded and tried KFFirstAide .. same deal.
All tools stay on <waiting for device>
remove factory cable after it is in fastboot
compmd said:
I was able to root my KFHD7 with Root_with_Restore and then Qemu .. rooting seemed to work fine.
I then tried to use Fire Flash app to load Hashcode's freedom boot image and TWRP recovery image.. clicked the flash button, it rebooted to a red screen.
I made myself a fastboot cable, when I plug it in, I see the Fastboot logo on the kindle, but my PC never detects the device.
Not sure where to go from here.
I've downloaded and tried KF2_SRT tool and no go. Also downloaded and tried KFFirstAide .. same deal.
All tools stay on <waiting for device>
Click to expand...
Click to collapse
remove factory cable after it is in fastboot mode then plug normal usb cable in it then into pc.
My Kindle Fire is basically like this one mentioned above and I'm in fastboot with the factory cable, but i'm stuck with , <waiting for device> on the tool. It seems as though my drivers can't be installed. Any fix to this.
wj3pic said:
...It seems as though my drivers can't be installed...
Click to expand...
Click to collapse
Can you elaborate on this?
soupmagnet said:
Can you elaborate on this?
Click to expand...
Click to collapse
So, basically.
1) I rooted
2) got google play
3) tried to get twrp with fire flash, and this is where i screwed up
Insted of using hashcode's twrp img i used the actualy twrp (blaze) img. so im in this constant reboot loop thing.
So i got a factory cable and I am in flashboot. I got KFHD recovery tool 1.3.5 and when i click option 1, it says <waiting for device>.
I think this is due to the fact that my drivers are not installed correctly, so i tried to reinstall drivers but it just doesnt seem to be working. My thoughts are, If i can just get my computer to recognize the device we might be ok. but i cant seem to make it do that.
wj3pic said:
So, basically.
1) I rooted
2) got google play
3) tried to get twrp with fire flash, and this is where i screwed up
Insted of using hashcode's twrp img i used the actualy twrp (blaze) img. so im in this constant reboot loop thing.
So i got a factory cable and I am in flashboot. I got KFHD recovery tool 1.3.5 and when i click option 1, it says .
I think this is due to the fact that my drivers are not installed correctly, so i tried to reinstall drivers but it just doesnt seem to be working. My thoughts are, If i can just get my computer to recognize the device we might be ok. but i cant seem to make it do that.
Click to expand...
Click to collapse
Watch this video here to learn how to set up your drivers http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw
You're bootlooping and need to use Kindle Fire First Aide to get your KFHD back to normal. http://forum.xda-developers.com/showthread.php?t=2096888
I used KFFA to get back to 7.2.3 bootloader and used Hashcode's 7.2.3 bootimg and the 2.6.1 TWRP file he lists. This worked great using Fire flash.
Sent from my Amazon Kindle Fire HD using xda app-developers app
KFHD7 turns off after 5 seconds
So I've basically followed all steps here and in numerous other threads, but one problem still persists: the Kindle Fire HD 7 turns off after 5 seconds. If I press the power button, nothing happens. If I plug it into a charger, it'll turn on and display the "Kindle Fire" logo on the screen then turn off after 5 seconds. If I plug it into a USB port, it'll turn on and display the "Kindle Fire" logo on the screen then turn off after 5 seconds. If I plug in the factory cable, it'll turn on and display the "Kindle Fire" logo, then display the "Fastboot Kindle Fire" logo then turn off after 5 seconds. I've left the unit on the charger for hours on end, then attempt to turn it on using the power button or plugging in a normal or factory USB cable and it'll do the same thing, turn off after 5 seconds.
OK you may have a 50/50 shot if its doing this because of a bad boot loader, but it could make things worse and end up in a hard brick if it shuts off mid flash, but if it happened to be something wrong with the battery then you would risk this for nothing, but I'm more inclined to think its the bootloader since it doesn't warn u of a low battery. If the fastboot device needs its drivers still, try installing the ones in my signature in that small time frame. If u can manage that, get a copy of the boot loader for your device and check the md5sum of the file( very important) and make sure it matches. Once you have that setup, you need to flash the boot loader onto the device, so I would suggest putting the boot loader in the same folder as fastboot.exe and running "fastboot -i 0x1949 flash bootloader bootloaderfile.bin" and let it say waiting for device, then plug you fastboot cable in and see if it will successfully flash within 5 seconds. If things go south it will hard brick though from an incomplete flash so just warning you ahead of time its up to you.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I now need to order a factory cable (which you can me out with here: https://www.wepay.com/donations/1151307052 hahaha). In the meantime can someone provide the "right" Kindle Fire HD 7" images to flash once I get my factory cable? Thanks
Also my problem is tried to flash system.img (did not flash boot or recovery just system) and now it just loops. Kindle Fire over and over. If there is a way to get to fastboot before I order my cable let me know. It turns on but just says Kindle Fire in orange and never reachs the blue boot loader
Thanks for whatever help you can give me. Luckly I still have my trusty Linux Laptop which is still working.
This utility comes with them and flashes them for you but I don't think it was recoded in bash shell script, so use the files it has with it, and if you have an understanding of what do do already with the images great, if not I guess I can explain, though if you know how to read batch then the commands are either the same or near similar for the fast boot commands that are used in the script. Who knows maybe this comes with a shell script... If not I might code one in the future if I have time. I haven't had the luxury of bricking my kindle yet so I haven't had a need to download this.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
nathansuchy said:
I now need to order a factory cable (which you can me out with here: https://www.wepay.com/donations/1151307052 hahaha). In the meantime can someone provide the "right" Kindle Fire HD 7" images to flash once I get my factory cable? Thanks
Also my problem is tried to flash system.img (did not flash boot or recovery just system) and now it just loops. Kindle Fire over and over. If there is a way to get to fastboot before I order my cable let me know. It turns on but just says Kindle Fire in orange and never reachs the blue boot loader
Thanks for whatever help you can give me. Luckly I still have my trusty Linux Laptop which is still working.
Click to expand...
Click to collapse
PM me. I will give you a factory cable.
This is my 1st time asking for help since I really have never needed it. I got a kindle fire HD 7" and rooted it. I added TWRP and a 2nd bootloader. For a long time I was stuck in TWRP and every time I tried to reboot it would just go back to TWRP. This morning I tried using the Kindle fire utility and selected option one. It seemed like it worked. I then rebooted and now I am stuck on the Kindle Fire boot screen. It shows Kindle fire on the screen, goes black for a few seconds, then back to the kindle fire, then goes black again. It keeps doing this over and over again. I am not able to get back into TWRP now. I am not sure what to do at this point. I have read just about every thread out there and cannot find a similar situation to mine. Any guidence would be appreciated.
OK mistake number one, do not use kindle fire utility on a kfhd, you could easily hard brick the kindle. That was designed for first gen it's and they work a bit differently than yours. OK now that I got that out of the way, does your kindle still have the logo turn blue?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Thanks for the quick reponse. When I installed the 2nd bootloader and TWRP I got into the bootloop. At that time when it would bootloop it would go from orange to blue twice before going back to TWRP again. After I made the mistake of using the Kindle FIre utility it now just keeps on the kindle fire start-up screen and it is always orange.
You are either going to need a fastboot cable to fix or have some luck getting a command to work... If you open the device manager, and plug your kindle in while its off, does a Tate device show up for a few seconds? If so try updating the drivers on the Tate device to the ones in my signature. From there you should be able to use a fastboot command to get the kindle to boot into fastboot. The command would be "fastboot -i 0x1949 getvar product", but if your not seeing a Tate device then this command will be useless, and I don't wanna finish explaining how to use this command until I know your PC is detecting it, assuming you don't know how to use the fastboot command by itself from a command prompt since I don't know your skill level with android stuff and windows command prompt stuff.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Thanks again for replying. I would say my experience level is low when it comes to command prompts. I get the basics though. I will check when I get home if I see if a Tate device shows up when I connect with my usb and get back to you. Even when I was in TWRP I was having difficulty seeing my device on the computer to add a custom rom to the sd card. I tried sideloading and tried mounting the sd card but nothing worked. I wish now I would have just left it in TWRP and did some more research. Live and learn I guess. I will let you know what I find out. Thanks again.
Ok. I turned off the Kindle and then attached the USB to the computer. Nothing is being recognized. I see now too that my adb interface is also gone. It appears the computer is no longer picking up anything. When I attach the Kindle to the computer it starts the bootloop again flashing the kindle fire screen over and over again. Let me know your thoughts. Thanks again.
I think your only hope is a fast boot cable, and honestly or just depends how broke it is whether it works or not
Sent from my XT907 using xda app-developers app
Thanks for the reply. So let's say I get a factory cable and I can get into fastboot mode; what are my next steps?
http://forum.xda-developers.com/showthread.php?p=33156486
Sent from my XT907 using xda app-developers app
Ok. I wanted to clarify what I did to get in the situation that I am in. I rooted my device with no issues. I then decided to install a 2nd bootloader and TWRP. After all was done my Kindle Fire HD 7" booted to TWRP. I could not get my computer to show my device so I was stuck. Every time I would reboot it would flash kindle fire in orange, then in Blue, then in Orange, the in Blue then would go back to TWRP. I then put the device with the USB attached to my computer and from TWRP I put the device into fastboot mode. I then used the KFHD SRT v1.3.5 tool and opened the SR.Tool.bat and chose option 1. After it was done I rebooted and now I am stuck on the Kindle fire screen (in orange) and it will show for a few seconds, turn off, then go back to the kindle fire screen again (in orange) and just keep repeating. I ordered a factory cable to try to get back to fastboot mode but since it did not work for me the 1st time I was wondering if anyone had any ideas for me. Thanks in advance.
Are you sure it is a factory/fastboot cable? I would either get them from skorn or proxenusa since I know they are reliable.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Hello again. I don't have the factory cable yet; I just ordered it yesterday. When I used the fastboot mode the last time I entered the mode from TWRP and was connected to my computer with a regular usb charger. When it was in fastboot mode I selected the option 1 from the tool I mentioned in my previous post. I am just wondering if the fastboot did not work with the KFHD tool I used because I did not have a factory cable connected hence why I am stuck on the Kindle fire screen. What do you think?
No, typically it is said to use a fastboot cable just to get the device into fastboot, then plug the normal cable in afterward.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
For future reference, when you get your kindle back up and running again, you need to flash a custom ROM to boot. The TWRP boot loop stems from trying to boot into stock ROM, it won't work. So just put a ROM on your kindle before you flash bootloader + twrp next time.
Sent from my MB886 using xda app-developers app
I posted this late last night after spending hours troubleshooting so sorry for the lack of details.
I thought I followed the instructions to a t on this thread. The only step I skipped was backing up my data. http://forum.xda-developers.com/showthread.php?t=2128848
When my Kindle Fire HD booted, it would loop between the regular Kindle Fire logo and the Blue logo. Eventually it would then go to TWRP. Once in TWRP I tried numerous times to use the Boot Option, Restore Option, and Recovery option to no avail. When I selected Bootloader, I would get the fastboot logo and it would stall there. I had to hard reset to get it to start again. Every time I connected my Kindle to the fastboot cable and entered the ADB or fastboot commens, it would say waiting on device. I also tried using the Factory Restore tool below and that did not work.
http://forum.xda-developers.com/showthread.php?t=1951254
When I connected the Kindle Fire HD to the PC, sometimes it would show as Android Device and other times it showed as PVT-8 or something to that effect.
Here is where I am now. The Kindle Fire HD no longer can boot to TWRP. It just looks the normal Kindle Fire logo and it loops indefinitely. My PC can no longer see the Kindle Fire HD at all. Is this a true brick or do I still have a chance?
BTW, I have multiple micro USB cables for all the devices I use. I am pretty sure the one I am using is the factory. How can I confirm this is a fastboot cable?
How did you get back to an orange only boot loop, it was easy to fix when it was blue... If it only is orange you are probably going to need a fastboot cable. Oh and to satisfy you with an answer as to why it boot looped, its because the newer amazon os detects the older boot loader or twrp, and refuses to boot, so you have to have a ROM ready to flash on the sdcard ahead of time.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
How did you get back to an orange only boot loop, it was easy to fix when it was blue... If it only is orange you are probably going to need a fastboot cable. Oh and to satisfy you with an answer as to why it boot looped, its because the newer amazon os detects the older boot loader or twrp, and refuses to boot, so you have to have a ROM ready to flash on the sdcard ahead of time.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks. Anyway to confirm that the cable I have is a fastboot cable? Also, how would I go about performing a repair if it is.
If its a fastboot cable you would know it because you bought it for such occasions and because as soon as you plug it into the kindle it says fastboot in big letters. Once you have it in fastboot use kindle fire first aid and try a system reflash, I'm sure it would boot up without a doubt if you used an older version of the Amazon os, like I think 7.4.2 or older, but I don't know what version kffa uses, so if it still doesn't boot after doing that, try using the kindle fire system restore tool.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
If its a fastboot cable you would know it because you bought it for such occasions and because as soon as you plug it into the kindle it says fastboot in big letters. Once you have it in fastboot use kindle fire first aid and try a system reflash, I'm sure it would boot up without a doubt if you used an older version of the Amazon os, like I think 7.4.2 or older, but I don't know what version kffa uses, so if it still doesn't boot after doing that, try using the kindle fire system restore tool.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thank you. Much appreciated. I ordered one from Amazon but will see about making one myself.
Are you trying to boot into Stock Amazon OS? That's your issue. Download a ROM and proper Google Apps package and either put them on your SD Card by mounting USB Storage in TWRP, or sideload flash a ROM, then you'll boot without issue. Don't forget to factory reset and wipe /system beforehand! I had this same issue my first time.
Sent from my MB886 using xda app-developers app
He somehow got rid of second boot loader, so he can't get into twrp...
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
If you are going to make one yourself find a Samsung branded cable they have the necessary solder points the rest of them don't seem to
Sent from my XT907 using xda app-developers app
I have the fastboot cable now. It will go in to fastboot as soon as I connect it. I tried using the KFHD Recovery Tool but I am still stuck in a Kindle Fire loop. Any ideas what to do next? I chose option1 and 3 already from the tool.
harryhoudini66 said:
I have the fastboot cable now. It will go in to fastboot as soon as I connect it. I tried using the KFHD Recovery Tool but I am still stuck in a Kindle Fire loop. Any ideas what to do next? I chose option1 and 3 already from the tool.
Click to expand...
Click to collapse
Why option 1? That is a different version of the tablet. You want to run KFFA and select 'completely restore the KFHD 7 7.2.3' This should be #3 of KFFA.
So once you have the tablet in fastboot, just run KFFA and go from there. Some files will download and then KFFA will push them onto your tablet. After that, your tablet will be stock and you can root and remove OTA updates from there. Keep an eye on your computer screen as the script will tell you what's going on.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers app
LinearEquation said:
Why option 1? That is a different version of the tablet. You want to run KFFA and select 'completely restore the KFHD 7 7.2.3' This should be #3 of KFFA.
So once you have the tablet in fastboot, just run KFFA and go from there. Some files will download and then KFFA will push them onto your tablet. After that, your tablet will be stock and you can root and remove OTA updates from there. Keep an eye on your computer screen as the script will tell you what's going on.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers app
Click to expand...
Click to collapse
Thanks. Option 3 worked, I just needed to be patient and wait for it to boot. I am good now and running CM 10.2.
harryhoudini66 said:
Thanks. Option 3 worked, I just needed to be patient and wait for it to boot. I am good now and running CM 10.2.
Click to expand...
Click to collapse
Good to heart. You'll love CM 10.2. Works real well.
Hello.
I rooted my kfhd 7 10.4.6 successfully and naturally proceeded to twrp where it got stuck on a bootloop. Now that I have made a factoryboot I was wondering what rout I should follow to flash the rom?
Browsing the topics I see these options:
* continue the process installing the twrp...
* download a toolkit that allows backup
* install ADB
* get fff
Now I'm wondering if someone has just made a restore utility, is there a utility to just restore to the state of having a rom installed?
Also, since I don't care for restoring backups, is there an easier way to flash?
I really appreciate your advice.
Deano
Firefirefire is not for this device 1st off, you don't have a kfhd 2nd off. Kfhd is v7.x.x. You have a kf2. Kf2's are 10.x.x.
Sent from my Kindle Fire HD 7 using XDA Premium 4 mobile app
if your logo turns blue at this point, turn the device off and when you turn it back on hold volume up while the logo is orange and keep holding it even after it turns blue, it should then say twrp and go into twrp, from there you could push a rom and flash it. If the logo does not turn blue then i would put it in fastboot and use kindle fire first aid to restore it, and try again.
which rout should I go? restore or twrp?
wire55 said:
Firefirefire is not for this device 1st off, you don't have a kfhd 2nd off. Kfhd is v7.x.x. You have a kf2. Kf2's are 10.x.x.
Click to expand...
Click to collapse
stunts513 said:
if your logo turns blue at this point, turn the device off and when you turn it back on hold volume up while the logo is orange and keep holding it even after it turns blue, it should then say twrp and go into twrp, from there you could push a rom and flash it. If the logo does not turn blue then i would put it in fastboot and use kindle fire first aid to restore it, and try again.
Click to expand...
Click to collapse
It's been a while since I bricked. Perhaps it was 10.4.6 I can no longer access the settings the verify. But now that I have a factoryboot cable. I would just flash cyanogenmod. Now when I connect factoryboot it reads (in a fancy 3d text) "Fastboot" with a small "kindle fire" on the right side of it.
I originally followed a youtube video that had links for freedom boots, twrp, etc... to this forum, but then again I must have downloaded incorrect versions.. I'm not concerned with the date. So I'm wondering if it's easier to restore or continue with twrp.
Here are some links I was looking at:
(do I need to go the adb rout)
http://forum.xda-developers.com/showthread.php?t=2459498
Do I need to have adb tools use command: fastboot -i 0x1949 getvar product
http://forum.xda-developers.com/showthread.php?p=33156486
http://forum.xda-developers.com/showthread.php?t=2685090
http://forum.xda-developers.com/showthread.php?t=2271909
http://forum.xda-developers.com/showthread.php?t=2685090
There are too many guides, here ... which is really great. But the process of download, verification, transfer (to a pc).
If I cant brick this device any harder than it is, I will follow each guide...
stunts513, the fire logo does not turn blue. In fact I was taking a video when it was loading ... (it's a funny video about
a guy who bricked his device)
I had the same issue... I forgot to remove a script before flashing twrp. Maybe it is the same for you. Did you followed carefully the tuto ?
In my situation, I managed to go into fastboot (with fasboot cable), flashed stock ROM, and did the flashing process from the beginning..
Hope it may help
"Envoyé depuis mon Amazon Kindle Fire HD avec Tapatalk"
If you only have fastboot access right now i suggest restoring with srt or kindle fire first aid. Afterwards you can start the twrp process over again, we can't simply flash cm from fastboot, if everything else isnt in place like the stack file or the bootimg and a old version of the bootloader then it wouldn't work. Fastboot should be in utilities like kffa and srt
stunts513 said:
If you only have fastboot access right now i suggest restoring with srt or kindle fire first aid. Afterwards you can start the twrp process over again, we can't simply flash cm from fastboot, if everything else isnt in place like the stack file or the bootimg and a old version of the bootloader then it wouldn't work. Fastboot should be in utilities like kffa and srt
Click to expand...
Click to collapse
There are so many options it seems, but I think I know what to do now (please let me know if it's not a incorrect course):
First, download and Kindle fire first aid from here, to restore back to and then follow the instruction here in order to start twrp and flashing.
wire55 said:
Firefirefire is not for this device 1st off, you don't have a kfhd 2nd off. Kfhd is v7.x.x. You have a kf2. Kf2's are 10.x.x.
Click to expand...
Click to collapse
I think the versions are according to kf2 (10.4.6) this time.
Thanks you so much everyone.
unbrick attempt 3
I have download and installed many sdks and drivers and checked md5.. while at it. kffirstaid does not really seem to connect with the device. And some messing around with the drivers did occur, uninstalling/reinstalling through downloads and through kffirstaid. It now announces as tate-pv-08 though a triangle is showing next to Android ADB Interface in device manager.. I think something is missing.. Is java sdk necessary? because it doesn't install ..
yeah
If I didn't mess around with my Kindle I would be reading through Dante's levels of hell which is more pleasant than all this troubleshooting ..
testing
test
You should be able to update the drivers of the Tate device using the drivers in my signature and have then programs work with fastboot. Not sure why an adb device and a Tate device show at same time, the Tate device should be the one needing fastboot drivers for it to work.
I got
stunts513 said:
If you only have fastboot access right now i suggest restoring with srt or kindle fire first aid. Afterwards you can start the twrp process over again, we can't simply flash cm from fastboot, if everything else isnt in place like the stack file or the bootimg and a old version of the bootloader then it wouldn't work. Fastboot should be in utilities like kffa and srt
Click to expand...
Click to collapse
Hi. Someone yanked out the factory-boot cable and I quickly ordered the scorpion king cable. I downloaded kffirst aide again and there's been a massive update. Running a restore showed all signs of success. But then after restoring it to normal boot, I get kindle fire logo showing and then the boot loop continues.
If kffa fails then try SRT.
Kffirst aide is in order
stunts513 said:
You should be able to update the drivers of the Tate device using the drivers in my signature and have then programs work with fastboot. Not sure why an adb device and a Tate device show at same time, the Tate device should be the one needing fastboot drivers for it to work.
Click to expand...
Click to collapse
I have upgraded kffirst aide and in the middle of restore I do the following statements:
cannot load 'boot-prod.img No error
cannot load recovery-prod.img No error
cannot load system.imp: No error
However at the end there is the success message:
Success!!! The kindle Fire 2 7 has been restored to software version 10.2.3
and yet the bootloop continues to plague the brick..
That means the files it tried to flash didn't exist on your computer. Try srt, it includes those images.
I have a kf2
stunts513 said:
That means the files it tried to flash didn't exist on your computer. Try srt, it includes those images.
Click to expand...
Click to collapse
I'm not sure if this is compatible with my device. Perhaps replacing those files/folders would solve the problem?
Oh wait yea kf2 didn't have a SRT.... My bad. Yea in that case you will need the kf2 I ages, kffa is supposed to download them for you but it's possible the links went down for the files.