I9001 stuck in bootloop twrp - Galaxy S I9000 Q&A, Help & Troubleshooting

Guys i have S Plus i9001. i just factory restored the custom rom 5.1.1 now phone is stuck in recory loop of twrp recovery. i tried connected to odin but in download mode it says. unrecognized device. but my vibrant T959 in connecting to same odin using same cable in download mode. i tried almost every thing on internet but no progress. reinstall drivers. even all drivers of computer. updated them. tried three cables and two versions of odin.
P.S: Odin is detecting it in RAMDUMP mode.

Guys please help if anybody knows

I posted the guide

Related

[Q] Bricked Galaxy S : Download mode corrupted?

Hi everyone
So here it is : No program is able to recognize/detect my Galaxy S i9000M (Bell Vibrant) when it's in download mode, so I can't flash any ROM. My phone is currently fully bricked and unusable. I cannot access to the recovery mode with the three-button thingy or by "adb reboot recovery"
I bricked using Odin 1.8, trying to flash a 2.2 froyo stock ROM from Samfirmware. The flashing went ok, but it failed to reboot. Actually, the screen was turned off and nothing was happening. I figured out it was fully bricked so I made a USB JIG, it worked. I can access my download mode.
I connected the phone to my Windows 7 computer and used Odin to flash back to 2.1 Eclair, with a stock ROM from Samfirmware. It failed (I don't remember the error message, it was a couple days ago...).
I tried with Heimdall Frontened. It had a problem uploading the .pit file, so the flashing didn't work.
Now each time i connect the phone to my computer, Windows (and Heimdall frontened and Odin) doesn't detect it,which means that I can't flash anything on it even though it is in download mode.
I have tried reinstalling like every driver on earth, still not responding.
I tried on another Windows 7 machine and on Ubuntu, the device is not detected.
I tried with different USB cables, nothing happens.
This is my hypothesis (maybe silly) : Could the problem be the Download mode being corrupted?
Whatever... I could use some help from you guys.
Thank you,
Sam
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
goldsage said:
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
Click to expand...
Click to collapse
That is strange... I tried installing Kies and it didn't detect the phone. And you could just flash any 2.3 stock ROM with Odin I guess.

[Q] Bootloop problems.

Hi, my phone is on bootloop , and i cant access recovery at all,
but i CAN get to Download mode, so wanted to reflash it again, but as i dont have a computer that has the appropriate drivers, i cant find it when plugged in?
Anything i could do?
Any chance that your USB is broken?
try Downloading Samsung Kies again.
there is a proggram which is just like Odin, i'll try to remmember it's name.
search the forums for samsung galaxy drivers the package (exe) was posted in december i think
both flashing programs are Odin and Heimdal
Odin requires the Samsung drivers and Heimdal comes with its own drivers.

Odin stuck on setup connection

Hello, I red a lot of posts about odin stuck in setup connection, But I can't resolve it.
I changed USB port, I run odin ad administrator, I restart PC, I tried it on 2 different pcs and always it is stuck on it...
Also kies doesn't recognize my galaxy ace. The ace is modded with a custom rom and I would like to put the original one but odin doesn't work.
Let me know
Thanks
Which version of ODIN are you using ?
Use v4.38
and are you sure about the procedure of installing stock firmware through ODIN ? BE sure of it with all the cooper file n all.
and Kies won't detect cause your device is rooted.

samsung note 1 N7000 do not boot

Hello,
I have read many posts, very interesting but no solution of my trouble.
My phone does not boot.
I have tried a factory recovery, nothing.
I have installed the USB driver, the ODIN. I tried to communicate through ODIN with different stock ROM, different ODIN versions, USB drivers and computer, nothing.
Maybe the reason is that the settings of the phone is not set to accept downloading through USB port.
What is your opinion?
Thanks
for information the configuration is
phone samsung galaxy N7000GSMH,
windows8,
USB_Drivers_1.5.27.0,
odin V3.09, V3.10, V3.12
ROM N7000XXLRI_
Se
Pleaze, does anyone have an idea?
I read that I should enable the usb debug in my device, but the phone is stuck in the boot....
Please help
Can you enter the recovery mode ?
I have the same sort of issue. My current phone just bricked itself, so I reached into the closet and pulled out my old GT-N7000, only to find it won't boot. Only the initial boot screen is displayed.
Charging mode works, and I can get it into download mode , - but not recovery. Odin recognises the phone, though not consistently. When I try to flash a stock ROM via Odin, with or without repartitioning (PIT file), Odin begins the operation and just stalls indefinitely.
Does this indicate hardware failure?

Odin fails after SetupConnection or doesn't get past Initialization

Anyone have any experience with this and any ideas? Trying to flash latest N960U1 firmware from sammobile and following their directions exactly. I have the Samsung USB drivers installed, I'm using Odin v3.13.3, and I reboot into download mode and Odin always fails with after SetupConnection or gets stuck at Initialization. I tried rebooting my computer, rebooting the phone a few times, restarting Odin a few times, nothing seems to change. Any ideas? Thanks in advance.
RickyShade said:
Anyone have any experience with this and any ideas? Trying to flash latest N960U1 firmware from sammobile and following their directions exactly. I have the Samsung USB drivers installed, I'm using Odin v3.13.3, and I reboot into download mode and Odin always fails with after SetupConnection or gets stuck at Initialization. I tried rebooting my computer, rebooting the phone a few times, restarting Odin a few times, nothing seems to change. Any ideas? Thanks in advance.
Click to expand...
Click to collapse
A screen shot of this on your PC
May help to provide assistance.
if u have an n960u and trying to flash u1, ud best make use of the xda search feature and do some reading.
RickyShade said:
Anyone have any experience with this and any ideas? Trying to flash latest N960U1 firmware from sammobile and following their directions exactly. I have the Samsung USB drivers installed, I'm using Odin v3.13.3, and I reboot into download mode and Odin always fails with after SetupConnection or gets stuck at Initialization. I tried rebooting my computer, rebooting the phone a few times, restarting Odin a few times, nothing seems to change. Any ideas? Thanks in advance.
Click to expand...
Click to collapse
Make sure you are using the original cable that came with phone. If you are and still having troubles then remove all you USB devices.
I built a new PC recently and couldn't flash which was driving me nuts. Turned out that once I removed the USB hub from PC flashing worked. No I was not attaching phone to hub but to a USB 2 port. The hub was a powered hub but I thought it was working fine without the added power supply but that caused issues with Odin. Put the hub back in place with power to it and now can flash too.
Drove me nuts. I even dug out an old laptop that had Windows 8 on it just so I could use Odin but figured out issue on new PC...

Categories

Resources