Related
I've seen these simple USB GPS receiver antennas that hook to a laptop for GPS duties so naturally I'm thinking why can't this be done for the nook. Ideally we would have a dual/split port so power could still be supplied at the same time.
I'd rather have this config since I don't like the idea of tethering to a GPS capable cell for privacy reasons and it ties up the cell too.
Why couldn't this be possible? Is it just a matter of the Nook recognizing the GPS antenna and being able to get a software package to recognize it?
Any ideas?
With CM7, and a bluetooth GPS reciever, this is no problem. We will never be able to build a GPS into the device, but we can get close enough...
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
KDOG2020 said:
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
Click to expand...
Click to collapse
Im not following, sorry.
I just ordered a "kit" for my NC actually - a car window mount, and a stand-alone BT GPS. I plan on attaching the the GPS to the window mount via velcro, and leave it in the car. You don't need USB at all (nor would it work, since our nook does not currently support usb host). Just get a BT module, and leave it in the car; connect it to the nook when you need it. done.
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
KDOG2020 said:
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
Click to expand...
Click to collapse
Ah, let me fill ya in then.
What i am talking about are standalone recievers - nothing more than a GPS and BT transmitter. No screen, no frills. Most have batteries that will last for weeks, and are small enough to store anywhere in the car when not in use. YOu can see a good selection here:
http://www.amazon.com/s/ref=nb_sb_n...eiver&keywords=bluetooth+gps+receiver&ie=UTF8
Hope that may give you some new ideas.
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
KDOG2020 said:
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
Click to expand...
Click to collapse
Now, i guess i cannot guarantee, but in theory, ANY BT gps should work with our system, since all GPS's transmit in the same standard. All you should need for software on the nook will be:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
Assuming my GPS arrives sometime soon, i will be able to give ya some first hand advice.
You will still need a data connection if you intend to use Google Maps for your GPS software.
If you want to use it without a data connection, you will need something like this:
https://market.android.com/details?id=com.alk.copilot.market.usa&feature=search_result
"maps stored on your phone, not downloaded"
Also note, Bluetooth range is very limited on the NC. My BT GPS has to be within 2 feet of the NC to connect.
That is true, a stand alone program is the best, but google will cache the maps if you pre-plan the route.
As for distance - with a car mounted GPS< you really don't need to worry about that - the GPS should be by the windshield anyway, so keeping it close to the nook isn't an issue..
What about this Google "Navigation" program that is on the nook? (the blue arrow)
KDOG2020 said:
What about this Google "Navigation" program that is on the nook? (the blue arrow)
Click to expand...
Click to collapse
You'd still need a data connection. The best probable solution would be to tether to a smartphone that has GPS - so the Nook has a data connection for the Google Maps and Navigation, and GPS data from the phone's GPS.
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
rogerdugans said:
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
Click to expand...
Click to collapse
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
I had trouble with some GPS apps.
I was able to use the GPS and data access on my Motorola Cliq to have GPS voice guided navigation.
http://forum.xda-developers.com/showthread.php?p=12076390
That is how I accomplished it.
If you have a hardware GPS, then you only need the 1 app, which is even easier, but I still recommend wifitether or barnicle for data access (you can download the maps for offline use if you plan ahead.)
colorado_al said:
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
Click to expand...
Click to collapse
I actually tried those apps to no avail, which is why I started looking for the other puck (not as accurate but easier to connect) and alternative solutions.
I actually had looked at all of the other (non- Google) nav apps for Android before to use with a now unused Droid (original) but found them all to be ... less than desirable for various reasons.
Note that I am NOT trying to discourage this project- it is possible, I am certain, but much like linux navigation software... lacking a certain "polish" if not functionality.
Hi, I'm thinking of getting a 7" tablet to install in my car, I'm not looking for anything super high spec as I'm literally just going to use it for mapping and playing music. That being said, the nook HD looks like a really good spec for the price..
I've just got a few questions
It doesn't have GPS, but I assume it will work using a bluetooth GPS once I've installed CM10?
I understand it uses a proprietary usb cable, how far does it stick out? Does anyone have a picture of it? This may be me only problem mounting it in dash as I wont be able to find a right angled one!
Yes, you can use a Bluetooth GPS puck. I haven't gotten Google Maps to work with it yet but I have gotten other programs to see it. A 3rd party GPS program should work with it. I'm still planning on testing that theory but to much family stuff has been going on right now to actually do it.
With the connector and the way the cable is wrapped right next to it it sticks out about an inch (just a little under that) from the bottom of the device. I'm pretty sure that to much pressure on that part of the cable will make is useless so you would have to make allowances for it. Also, it needs more power than a normal micro usb cable to actually make it charge. The AC adapter puts out 1 volt at 2 amps.
Got Sygic working today. Had to use this program to get it working though. https://play.google.com/store/apps/...?t=W251bGwsMSwyLDYsImRlLm1vYmlsZWouYnRncHMiXQ..
Other then that seems to work quite well. I should mention that I am on CM10.1.
I got Google maps to work fine with my phone using Bluetooth for gps and Wi-Fi for data.
Have to see up maps to accept debug data and use bluetooth gps programs on both devices
Sent from my Galaxy Nexus using xda app-developers app
So I have xt894 running cm12. I have a windows 7 pc.
What do I need to do to be doing what I could be doing?
Please open my eyes.
Sent from my XT894 using Tapatalk
What is it you expect that you could be doing? :v
The last I checked, CM12 - PC works fine over bluetooth, though you'll need a decent bluetooth adapter (that comes with its own software), as Windows' bluetooth stack doesn't seem to like the $0.99 CSR-based adapters you can buy off eBay.
Alternatively, I guess you could buy a copy of Bluesoleil, since it replaces the Windows stack and makes said cheap adapters properly functional. Might be expensive, though.
i would like to have my pc lock when i walk away.
i would like music on my phone to be played on my computer speakers while within range.
I want my droid 4 to act as a mouse and keyboard.
I want it to be connected to multiple bluetooth enabled computers/devices and be able to select which device to output to using a menu on the droid.
games on my phone with a controller, in addition to other features yet thought of.
Ultimately, this is a very functional device.
have a great day.
thank you for your well formed replies.
Sorry for the late reply, I've been pretty busy with work this week.
I'm not personally familiar with any programs that do this, but it looks like this is what you're looking for.
To pipe music through to your speakers, you'll need an adapter that supports A2DP, or more ideally for sound quality, aptX. I would guess even the cheap adapters support A2DP, since it's older. The Windows bluetooth stack doesn't appear to offer any audio functionality with cheap CSR-based adapters (which more dollar ebay adapters are), but they might be A2DP-capable at least.
Even with the Windows bluetooth stack, you can use your phone as a keyboard/mouse. I used AndroMouse for this purpose a while back, and it (mostly) worked, but there are many apps that should work as well. Most if not all will require you to install a client program on your PC and run it whenever you want to connect.
As with the above, even the Windows stack allows using your phone as a controller; they all use the common Remote Control bluetooth profile. I tried out Ultimate Gamepad, and it seemed to work fine. I only tried playing a Gameboy game with it though, I'm not sure about its responsiveness for more demanding games...
If you shop a bit on ebay, some adapters include a disc with an older version of Bluesoleil, and others might come with a copy of CSR Harmony (they'll have a disc labeled "CSR 4.0" pictured, which could be anything really). If you're willing to spend $10 or so, you can usually find a few listings with adapters by IOGEAR, Insignia, etc other house brands which possibly have up-to-date software you can grab off their sites.
Cheaper than outright buying Bluesoleil, anyway.
So I've searched and want to make sure I'm not missing something. I'm looking to put my Raspberry Pi 3 in my car as a supplement/media to the infotainment center. Im connecting it with the CRUX AVITY interfacing setup. My main question or problem is that I want to be able to screen mirror my phone, on occasion, to the RPi (Google maps for example is much better than my on board nav unit). Is there a way to do this with the WiFi chip on the Raspberry Pi 3? Do I need a dongle? What is the current solution most people are using in this scenario? I'm on a Galaxy S8+.
Thanks in advance.
Hello guys, I'm planning to build my first carputer. 2 years ago I have modified a tablet, Asus zenpad 8, very similar to Nexus 7 in my opinion. Now I want something more.
What I want:
Fully automated pc that works exactly like an android head unit but much better and more flexibility when it comes to external devices like an external DAC with optical output. Actually this is the main reason for not buying an android head unit, didn't find one that works very well with an external DAC. Some other things that I want from this carputer: the compatibility with steering wheel controls, backup camera, fm or even DAB radio, gps, phone calls( via bluetooth), 4G internet and so on. Many of those things are pretty simple to integrate, will talk about them later.
The components:
1. The pc - didn't think about it yet because there are loads of mini pc on the market for good prices. The only problem I'm thinking is the start up on ignition. First I wanted to go for a Remix mini pc but I don't know how could I make it start on ignition and after that automatically play the last song. If I would go for a normal PC, I found a smart PSU which has the possibility of ignition start and stop and puts the computer in sleep mode. That way I will avoid the waiting time for the boot, in fact the computer will be permanently turned on. The only problem I can think of, is the compatibility of this PSU with the android Remix OS. Is it possible?
I've tested the Remix OS and I like it, very quiq, easy to use in car with a touch screen, support all the external devices( wifi, 4g, fm and DAB, external DAC with optical output) and the launcher can be changed. I know I can opt for Windows OS and that way I will be sure that the PSU works but in my opinion windows is not so "mobile friendly", not so easy to use in car.
2. The screen: not so many to talk about, found on ebay some 9" tft touch screens, very good resolution, hdmi connectivity and USB for touch. The best thing with these screens is the AV2 input for the backup camera. The screen automatically switch to this input, has guidance lines, and this way I solved the problem with the camera. And also is quite cheap.
3. Steering wheel controls. Found on ebay the Joycon steering wheel adapter that is compatible with Android. I just have to make an initial configuration and that's it, nothing more, simply works through USB.
4. The other external devices: all of them can be found on ebay for good prices. The only thing that worries me is the bluetooth compatibility. I remember when I built that Asus zenpad tablet, I couldn't find a solution for this. Now my question is, what type of bluetooth adapter should I buy and how do I integrate this in the carputer. And I'm not talking about physical connection, I think I will need some kind of software, app, that knows what to do with this bluetooth adapter.
So, in the end, I would need some help regarding the ignition start, just the hardware part of it, all the other automatic things (launch the app and play the song) can be made with tasker very easy. Also I would need some help with the bluetooth phone calls.
Hope I didn't miss any important thing and I will appreciate any help. Thanks.
yoiedi said:
Hello guys, I'm planning to build my first carputer. 2 years ago I have modified a tablet, Asus zenpad 8, very similar to Nexus 7 in my opinion. Now I want something more.
What I want:
Fully automated pc that works exactly like an android head unit but much better and more flexibility when it comes to external devices like an external DAC with optical output. Actually this is the main reason for not buying an android head unit, didn't find one that works very well with an external DAC. Some other things that I want from this carputer: the compatibility with steering wheel controls, backup camera, fm or even DAB radio, gps, phone calls( via bluetooth), 4G internet and so on. Many of those things are pretty simple to integrate, will talk about them later.
The components:
1. The pc - didn't think about it yet because there are loads of mini pc on the market for good prices. The only problem I'm thinking is the start up on ignition. First I wanted to go for a Remix mini pc but I don't know how could I make it start on ignition and after that automatically play the last song. If I would go for a normal PC, I found a smart PSU which has the possibility of ignition start and stop and puts the computer in sleep mode. That way I will avoid the waiting time for the boot, in fact the computer will be permanently turned on. The only problem I can think of, is the compatibility of this PSU with the android Remix OS. Is it possible?
I've tested the Remix OS and I like it, very quiq, easy to use in car with a touch screen, support all the external devices( wifi, 4g, fm and DAB, external DAC with optical output) and the launcher can be changed. I know I can opt for Windows OS and that way I will be sure that the PSU works but in my opinion windows is not so "mobile friendly", not so easy to use in car.
2. The screen: not so many to talk about, found on ebay some 9" tft touch screens, very good resolution, hdmi connectivity and USB for touch. The best thing with these screens is the AV2 input for the backup camera. The screen automatically switch to this input, has guidance lines, and this way I solved the problem with the camera. And also is quite cheap.
3. Steering wheel controls. Found on ebay the Joycon steering wheel adapter that is compatible with Android. I just have to make an initial configuration and that's it, nothing more, simply works through USB.
4. The other external devices: all of them can be found on ebay for good prices. The only thing that worries me is the bluetooth compatibility. I remember when I built that Asus zenpad tablet, I couldn't find a solution for this. Now my question is, what type of bluetooth adapter should I buy and how do I integrate this in the carputer. And I'm not talking about physical connection, I think I will need some kind of software, app, that knows what to do with this bluetooth adapter.
So, in the end, I would need some help regarding the ignition start, just the hardware part of it, all the other automatic things (launch the app and play the song) can be made with tasker very easy. Also I would need some help with the bluetooth phone calls.
Hope I didn't miss any important thing and I will appreciate any help. Thanks.
Click to expand...
Click to collapse
Have you thought about using a rock 64 single board computer like a Raspberry Pi that Android is really supported something like that could work really well as it has gpio outputs for various functions USB inputs for audio dacs and DAB radio and can work with touch screens or even projectors for heads up.
The truth is I know nothing about raspberry pi, heard about them but nothing more. Can you please explain a bit more? Is it possible to make it automatically turn on/off on ignition? How? Apparently that's the hardest part of the job. I've read on the internet that Remix OS doesn't work very well with stand-by function and if I'll make it to shut down completely, I'm afraid that will take too long to boot back. I was thinking about Remix mini pc and a controller that simulates pressing of the on/off button simultaneously with the ignition but it has to be tested.
So, quickly searched on google about raspberry pi and banana pi possibilities, there are some power supplies for in car use, basically they simulate a shut down from the button with a delay. That looks very good, very easy to do and also very cheap. But, how fast can boot a raspberry or banana pi running Remix OS? Does anyone know?
yoiedi said:
The truth is I know nothing about raspberry pi, heard about them but nothing more. Can you please explain a bit more? Is it possible to make it automatically turn on/off on ignition? How? Apparently that's the hardest part of the job. I've read on the internet that Remix OS doesn't work very well with stand-by function and if I'll make it to shut down completely, I'm afraid that will take too long to boot back. I was thinking about Remix mini pc and a controller that simulates pressing of the on/off button simultaneously with the ignition but it has to be tested.
Click to expand...
Click to collapse
To make it turn off and on with the ignition, just plug it into a 12v line that is powered when ignition is on. Generally the 12v line to your head unit fits that criteria. If you want constant power to keep the device in standby mode, you can connect a relay to an a wire that is powered when the car is powered, then use the relay to short the pins of the standby button.
For boot time, you can achieve quite a bit of improvement by getting the fastest sdcard you can buy.
Thanks for advice. I've searched on youtube how android works with raspberry pi and in my opinion they don't do it very well, I mean it struggles even on youtube playing videos. So, I bought an ssd hdd, 32gb and made some tests on my pc. Found a version of android 7 special made for in car use and I'm quite happy with it until now. This android has a "special" feature, when the power button is pressed the pc shut down without displaying any confirmation message on screen. That means it will work perfectly with an intelligent power supply like m2-atx, m3-atx etc. In the next few days I'll get a new pc, micro atx mainboard so I'll begin the tests on that. Until now I've got a boot time around 30-40 seconds. Is not a bad time but I'll try to remove the unnecessary apps from startup and see what happens then. I'll post some pictures or even videos when I'll have good results. Any advice is welcome. Thanks.
yoiedi said:
Thanks for advice. I've searched on youtube how android works with raspberry pi and in my opinion they don't do it very well, I mean it struggles even on youtube playing videos. So, I bought an ssd hdd, 32gb and made some tests on my pc. Found a version of android 7 special made for in car use and I'm quite happy with it until now. This android has a "special" feature, when the power button is pressed the pc shut down without displaying any confirmation message on screen. That means it will work perfectly with an intelligent power supply like m2-atx, m3-atx etc. In the next few days I'll get a new pc, micro atx mainboard so I'll begin the tests on that. Until now I've got a boot time around 30-40 seconds. Is not a bad time but I'll try to remove the unnecessary apps from startup and see what happens then. I'll post some pictures or even videos when I'll have good results. Any advice is welcome. Thanks.
Click to expand...
Click to collapse
Check these out http://www.hardkernel.com/main/main.php
yoiedi said:
Thanks for advice. I've searched on youtube how android works with raspberry pi and in my opinion they don't do it very well, I mean it struggles even on youtube playing videos. So, I bought an ssd hdd, 32gb and made some tests on my pc. Found a version of android 7 special made for in car use and I'm quite happy with it until now. This android has a "special" feature, when the power button is pressed the pc shut down without displaying any confirmation message on screen. That means it will work perfectly with an intelligent power supply like m2-atx, m3-atx etc. In the next few days I'll get a new pc, micro atx mainboard so I'll begin the tests on that. Until now I've got a boot time around 30-40 seconds. Is not a bad time but I'll try to remove the unnecessary apps from startup and see what happens then. I'll post some pictures or even videos when I'll have good results. Any advice is welcome. Thanks.
Click to expand...
Click to collapse
Why don't you get an android head unit?
gtxaspec said:
Why don't you get an android head unit?
Click to expand...
Click to collapse
I think you didn't read, I couldn't find any that works with an external sound card(DAC). My audio system is quite expensive, made for sound quality, and of course I want the head unit to be as good as possible. An external sound card with optical output I think is the best you can get.
Google search "raspberry pi alternative" theres lots of these little gadgets now adays, raspberry pi 3B is one of the most popular ( and cheapest) but there are more out there that are more powerful & better hardware.. The ASUS Tinkerboard is becoming popular as well I think I may be getting one for a streaming machine.
I've already purchased the PC and ordered the PSU. The price for all those components(+ a 30gb ssd) was under 100£ so not very expensive. Why I went for a pc instead of a single board pc? I don't know, maybe because I have no previous experience with them. Yes is true that is way much bigger than a raspberry alternative and the power consumption as well but I don't mind, maybe in the future when I'll get bored again I will try one of those pc's.
So, I've tried to install the Android X86 64bit (there is one version on internet with a patch that removes the confirmation message when you want to shut it down) on this pc with no success, all I've got was a black screen or a continuous reboot. Found out that Android X86 64bit is not so friendly with AMD cpu's. Should've search for that before buying it. Anyway, tried the 32bit version so that one works very well but I didn't find any with that patch installed. How can I remove that confirmation message when the power button is pressed?
Thanks.
first tests, quite happy with it, still lot of work to do.
https://youtu.be/lNJmRjXG81A
Odroid C2 with android + kodi