Related
So I was trying to wipe fresh Kinology and the device got stuck in a recovery bootloop. Not such a big problem" i thought to myself,
"I'll just wipe everything" and so I did. Except one little detail. I ****ed up and wiped EVERYTHING, including the SD card and *that thing that boots the OS*.
Now, it wasn't such a big problem either, I could just boot into recovery, mount the SD card, transfer the files to the kinlde, buuuut there was one little problem. Once I connected the kindle to PC, a USB device was detected, but no storage was shown up. I got to the recovery terminal and it said
E: unable to locate volume information for usb storage mode
Click to expand...
Click to collapse
Okay, once again, no such a big deal, I can boot into fastboot, reflash stock and live happily ever after. I go into fastboot mode (note that the kindle is indeed connected AND DETECTED by PC and I have drivers installed). And guess what? Fastboot won't detect the kindle! (screenshot related)
Now I have a kindle with no OS installed, which can't mount storage and can't connect to fastboot. What should I do?
tldr: wiped everything, no os, can't mount in twrp, can't connect to fastboot, wat do?
SlimThePineapple said:
So I was trying to wipe fresh Kinology and the device got stuck in a recovery bootloop. Not such a big problem" i thought to myself,
"I'll just wipe everything" and so I did. Except one little detail. I ****ed up and wiped EVERYTHING, including the SD card and *that thing that boots the OS*.
Now, it wasn't such a big problem either, I could just boot into recovery, mount the SD card, transfer the files to the kinlde, buuuut there was one little problem. Once I connected the kindle to PC, a USB device was detected, but no storage was shown up. I got to the recovery terminal and it said
Okay, once again, no such a big deal, I can boot into fastboot, reflash stock and live happily ever after. I go into fastboot mode (note that the kindle is indeed connected AND DETECTED by PC and I have drivers installed). And guess what? Fastboot won't detect the kindle! (screenshot related)
Now I have a kindle with no OS installed, which can't mount storage and can't connect to fastboot. What should I do?
tldr: wiped everything, no os, can't mount in twrp, can't connect to fastboot, wat do?
Click to expand...
Click to collapse
I had to swap cables for my fastboot to show up;boot into fastboot then go back to stock cable. I also had to use specific commands like "fastboot -i 0x1949" then the command. Hope this helps any.
zander78 said:
I had to swap cables for my fastboot to show up;boot into fastboot then go back to stock cable. I also had to use specific commands like "fastboot -i 0x1949" then the command. Hope this helps any.
Click to expand...
Click to collapse
I don't have a fastboot cable, I enter fastboot mode through recovery
I've tried the SRT tool today and if I press "Check fastboot status" it just stays the same as on the screenshot 1.
And if I choose the second option, it just stays like that (screenshot 2) without any movement.
Help me, please D:
SlimThePineapple said:
I've tried the SRT tool today and if I press "Check fastboot status" it just stays the same as on the screenshot 1.
And if I choose the second option, it just stays like that (screenshot 2) without any movement.
Help me, please D:
Click to expand...
Click to collapse
You're gonna need a fast boot cable. You can make one if you know how to solder. Or buy one from skorpn. http://forum.xda-developers.com/member.php?u=500006
Okay, for anyone interested: I've solved my problem (partially). I used ADB Sideload from TWRP and sideloaded CM10, but sideloading kinology didn't work for me and resulted in a bootloop.
You need to flash the stock Amazon OS, wipe everything EXCEPT INTERNAL STORAGE first then flash the stock os, then kinology.
Sent from my KFHD7 running ParanoidAndroid using Tapatalk 2
dugoy13 said:
You need to flash the stock Amazon OS, wipe everything EXCEPT INTERNAL STORAGE first then flash the stock os, then kinology.
Sent from my KFHD7 running ParanoidAndroid using Tapatalk 2
Click to expand...
Click to collapse
That's exactly what I did, and it resulted in a bootloop
SlimThePineapple said:
That's exactly what I did, and it resulted in a bootloop
Click to expand...
Click to collapse
If adb sideload isn't working reliably, you can just use "adb push filename.zip /sdcard/" to copy files manually to your Kindle. This will work for whatever zips you want, be it gapps, CM10.1, kinology, stock, etc.
A while earlier I was trying to enable tethering on my at&t N6 by editing the build.prop and after the reboot it's stuck in a boot loop. I don't imagine that this is important but it doesn't get to the dots animation; just white Google and the unlock at the bottom. I am still able to get into fastboot and recovery (stock one). I have a backup of the correct build.prop in the /system file named build.prop.back , so I'm hoping that there's a way to revert to that without needing to wipe my device again, but I'm not sure.
I found this thread, however my computer isn't recognizing the device when it's in recovery mode. I have the fastboot drivers installed (needed to root), so that may be why but, again, I'm not sure. the adb devices command shows that there is no device, I imagine because the driver is not installed.
any help would be appreciated. thanks in advance.
Try the ADB & Fastboot installer from this thread - http://forum.xda-developers.com/showthread.php?t=2588979
jj14 said:
Try the ADB & Fastboot installer from this thread - http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
Unfortunately that didn't fix the problem.
Do you know if the fastboot driver and recovery driver would be different? As far as I can tell from my research, I think they're the same, but I could be wrong. Hopefully that's the problem and you can direct me towards the correct driver.
If I select "show hidden devices" in the device manager, it shows the phone as ADB Interface, and I tried undating the driver for that but it said it was already up to date. not sure what to do from here.
Thanks for your help.
Install working drivers if you can. This is important on so many levels. If they are installed correctly you type ADB devices, you should see your device. If you do type adb reboot bootloader, it should reboot to bootloader. Type fastboot devices, you should see same device name. Pat self on back.
Once that is all good I'd install the latest TWRP img file for your whale, straight off TWRP website (do you know how to do this? fastboot flash recovery recovery/name.img) . Once you do that go to your new recovery by pushing vol-down twice then your power button, inside TWRP you mount system and go into the file manager inside TWRP and swap/rename build.prop files. At this point, please make a backup inside TWRP. This backup will be on your internal memory, also save a copy to your computer in case you accidentally reformat your internal memory like every noob that uses toolkits. Having a backup is very important when you are screwing around with your phone. Reboot and profit.
jawmail said:
Install working drivers if you can. This is important on so many levels. If they are installed correctly you type ADB devices, you should see your device. If you do type adb reboot bootloader, it should reboot to bootloader. Type fastboot devices, you should see same device name. Pat self on back.
Once that is all good I'd install the latest TWRP img file for your whale, straight off TWRP website (do you know how to do this? fastboot flash recovery recovery/name.img) . Once you do that go to your new recovery by pushing vol-down twice then your power button, inside TWRP you mount system and go into the file manager inside TWRP and swap/rename build.prop files. At this point, please make a backup inside TWRP. This backup will be on your internal memory, also save a copy to your computer in case you accidentally reformat your internal memory like every noob that uses toolkits. Having a backup is very important when you are screwing around with your phone. Reboot and profit.
Click to expand...
Click to collapse
I though I had the working drivers... Whenever I boot into fastboot/ bootloader, I can do fastboot devices and the phone shows up, but for whatever reason adb devices returns an empty list everywhere. It's empty in fastboot and recovery and while the phone is stuck in it's bootloop...
I'm fairly confident I can flash TWRP without any problems. I had an old galxy tab 2 that i flashed cyanogen onto a while ago, however i used clockwork for that recovery. I don't imagine it would be too much different though.
edit: also might be worth noting that I'm using a windows 8.1 computer for this. not sure if it matters or not, but it might be useful
momo5732 said:
I though I had the working drivers... Whenever I boot into fastboot/ bootloader, I can do fastboot devices and the phone shows up, but for whatever reason adb devices returns an empty list everywhere. It's empty in fastboot and recovery and while the phone is stuck in it's bootloop...
I'm fairly confident I can flash TWRP without any problems. I had an old galxy tab 2 that i flashed cyanogen onto a while ago, however i used clockwork for that recovery. I don't imagine it would be too much different though.
edit: also might be worth noting that I'm using a windows 8.1 computer for this. not sure if it matters or not, but it might be useful
Click to expand...
Click to collapse
You are ok w/ your problem because you can get to fastboot screen. Don'y worry about adb drivers for now. Do what I said in my earlier post in the 2nd paragraph, start w/ installing TWRP img then do the rest and it will work for you. Win 8.1 seems to have its difficulties but we'll worry about that later after you get TWRP installled.
jawmail said:
You are ok w/ your problem because you can get to fastboot screen. Don'y worry about adb drivers for now. Do what I said in my earlier post in the 2nd paragraph, start w/ installing TWRP img then do the rest and it will work for you. Win 8.1 seems to have its difficulties but we'll worry about that later after you get TWRP installled.
Click to expand...
Click to collapse
OK. twrp is making a backup as I type. is this backup the same thing as a nandroid backup? i hadnt heard of them before I decided to root.
It should boot properly now. I'll update when it's done.
Edit: IT BOOTS! thank you so much.
Edit 2: So I'm not really sure why it works now but adb recognizes it when its in twrp... odd. I tried to reinstall the drivers with the most recent version i could find, but it didn't look like it actually updated anything. maybe stock recovery was just broken? I'm not sure...
momo5732 said:
OK. twrp is making a backup as I type. is this backup the same thing as a nandroid backup? i hadnt heard of them before I decided to root.
It should boot properly now. I'll update when it's done.
Edit: IT BOOTS! thank you so much.
Edit 2: So I'm not really sure why it works now but adb recognizes it when its in twrp... odd. I tried to reinstall the drivers with the most recent version i could find, but it didn't look like it actually updated anything. maybe stock recovery was just broken? I'm not sure...
Click to expand...
Click to collapse
Cool glad it's working. Yes backup=nandroid
It's cool now I've also noticed the computer recognizes phone in TWRP. You can drag and drop files onto the phone while it's in TWRP not just booted in android, couldn't do that before unless I'm wrong which is often. This is really cool as I always forget a file or two or its location on SD card.
I recently Updated To CM12 and had alot of apps on my kindle so i decided to factory reset it but now when ever i boot up my kindle it boots straight to TWRP but never loads it just keeps flashing on the TWRP boot screen im not sure if i can connect my device to my computer i think it may be because i need the drivers not sure next time i get a hold of the kindle ill try. When i plug the kindle in i hear the windows noise that happens every time u plug something in also i have an option to eject it from my tray but i cant view the files.
Tried To FLash TWRp Again
So someone said that you could try to flash Twrp Again or something so in fastboot i typed adb flash recovery Twrp.img but it kept saying waiting for device. i tried a different command Adb Reboot and that rebooted the kindle back into recovery but it still flashes but good news that it can connect to my pc.
What i noticed
Epicfin123 said:
So someone said that you could try to flash Twrp Again or something so in fastboot i typed adb flash recovery Twrp.img but it kept saying waiting for device. i tried a different command Adb Reboot and that rebooted the kindle back into recovery but it still flashes but good news that it can connect to my pc.
Click to expand...
Click to collapse
this is the same exact thing that happened to me. I learned never to factory reset from the tablet on cm 12, Instead so it from recovery. I currently need help im just a noob in a software engineering highschool.Any help would be appreciated
Panthex said:
this is the same exact thing that happened to me. I learned never to factory reset from the tablet on cm 12, Instead so it from recovery. I currently need help im just a noob in a software engineering highschool.Any help would be appreciated
Click to expand...
Click to collapse
Im a noob to if i find a way to fix my kindle ill post the method here.
I checked my driver properties and it did not say kindle it just had this on it http://i.imgur.com/d7U7jL5.png?1
DUDE I Kinda Found A Fix i can know access TWRP DDD
1. Download This https://docs.google.com/uc?id=0B4lZEJI5lYeMb1g5bW9tQW00LUE&export=download
2.connect kindle to pc and boot up the kindle normally
3.extract the Zip and open tha bat file
4. select option 4 It should then say waiting for device
5.open up cmd adb and type adb reboot-bootloader then it should say clearing cashe or user data then after about a min power off ur device then power it back on
6.then it should now say clearing cashe or user data On of them then after a min switch of ur device then back on and team win should load the next problem is that i cant send files through to my kindle so i cant flash anything. maybe i need newdrivers cna someone link me to one.
Edit; reboot The device again and it should boot into cm12 but once again im stuck in a boot loop and unsure of what to do the boot loop is just the cm12 logo it does not go onto the actual os
nvm lol wait about 5 mins it should boot.
Stays on waiting for device
Epicfin123 said:
DUDE I Kinda Found A Fix i can know access TWRP DDD
1. Download This (Cant Post Links)
2.connect kindle to pc and boot up the kindle normally
3.extract the Zip and open tha bat file
4. select option 4 It should then say waiting for device
5.open up cmd adb and type adb reboot-bootloader then it should say clearing cashe or user data then after about a min power off ur device then power it back on
6.then it should now say clearing cashe or user data On of them then after a min switch of ur device then back on and team win should load the next problem is that i cant send files through to my kindle so i cant flash anything. maybe i need newdrivers cna someone link me to one.
Edit; reboot The device again and it should boot into cm12 but once again im stuck in a boot loop and unsure of what to do the boot loop is just the cm12 logo it does not go onto the actual os
nvm lol wait about 5 mins it should boot.
Click to expand...
Click to collapse
so i fixed my drivers problem and now when i get on to step 5 i go into fastboot(boot loader) but it keeps saying waiting for device.
Thanks.
This will be very useful for me in the future thanks i saved a txt file of it on my pc
Yo
I just beat all the methods hook at otg with a keyboard and i hit ctrl alt del and it rebooted to rom outta team win boot loop, first i got thru google lockthat everome said was impossible after they fixed the otg method now this ntb for a new guy eh!! it was probaly jus del that did it althugh i did button mash a lil, when i hit ctrl alt del tho is when it rebooted, im amazed ahaha
Danny1091 said:
so i fixed my drivers problem and now when i get on to step 5 i go into fastboot(boot loader) but it keeps saying waiting for device.
Click to expand...
Click to collapse
I have the same issue is there a fix?
Epicfin123 said:
I recently Updated To CM12 and had alot of apps on my kindle so i decided to factory reset it but now when ever i boot up my kindle it boots straight to TWRP but never loads it just keeps flashing on the TWRP boot screen im not sure if i can connect my device to my computer i think it may be because i need the drivers not sure next time i get a hold of the kindle ill try. When i plug the kindle in i hear the windows noise that happens every time u plug something in also i have an option to eject it from my tray but i cant view the files.
Click to expand...
Click to collapse
I am having the EXACT same problem as you but its not connecting to pc even though the drivers are installed help please:crying:
Same.
brianrox1233 said:
I am having the EXACT same problem as you but its not connecting to pc even though the drivers are installed help please:crying:
Click to expand...
Click to collapse
Me too. HELP!!! :crying::crying::crying:
Guys! It's stuck on teamwin screen!
It's so disheartening to see this lay waste. Please someone please help me!
Hey everybody!
This is my first time posting something on XDA. This is really cool.
So I just bricked my fire, hard. Let's start from the top:
- I used the super tools rootjunkysdl.com/?device=Amazon%20Fire%205th%20gen&folder=SuperTool to get the google play store.
- Using the google play store, I got flashfire.
- Using flashfire, I flashed SlimLP onto my tablet successfully and quickly.
- I got a little cocky, and based on the comments on the youtube.com/watch?v=NaCBSuUuhRE video that I used to flash SlimLP I decided to try the flashfire technique with CM since it is my favorite ROM.
- I did everything properly and the same, but... it got stuck here... for about an hour...
imgur.com/QJvmRz3
So I decided to do the smartest thing ever and cancel it myself by turning it off, I wasn't able to do anything else anyway. Either way, my tablet is now stuck in the cyanogen 12 boot load animation, the one of the cute blue head with the radar effect.
I would of fixed this a long time ago, but for some reason I'm not able to adb sideload.
I go into fastboot, I can detect the device, but not adb sideload.
I go into adb sideload mode, I can't detect the device, so definitely not sideload. :/
I've tried updating my drivers, I don't know if I'm doing it right, but while it was in fastboot mode, I changed it to Android Composite ADB Interface, and that didn't change anything.
No matter what I'm doing, whenever I do adb devices, I always get:
List of devices attached
Blank. Nothing. Only when I'm in fastboot mode do I get:
fastboot devices
G0K0H40454261ARU fastboot
Something, but still no ADB. I can't even load TWRP here, tried that, I just install it and it just sits there dumbly saying it's installed.
I'm bricked just like my tablet. Could I please get some help here? I'm very desperate to get this tablet back up and running, and I feel so stupid for not having stuck with Slim and trying to install CM. I really don't want it to stay bricked like this.
Thank you, XDA!
Do you know if you had amazon FireOS version 5.0.1 or 5.1.1?
Just to be clear, you have actually selected the adb sideload option on your Fire when you try to connect with adb on you pc, correct? ADB is not even active until the adb sideload option has been selected.
drillster said:
I can't even load TWRP here, tried that, I just install it and it just sits there dumbly saying it's installed.
Click to expand...
Click to collapse
We can not "install" twrp. The bootloader is locked & won't allow it. We can only temporarily load twrp into memory. Each time we want to use twrp, we must connect usb to a pc, enter fastboot mode & load twrp. But this can only been done on 5.0.1 Fires. It's been blocked on 5.1.1. No way to load twrp at all on 5.1.1.
Just use this method: http://forum.xda-developers.com/ama...howto-how-to-restore-frimware-device-t3238740
hAtE NeVeR dIeS said:
Just use this method: http://forum.xda-developers.com/ama...howto-how-to-restore-frimware-device-t3238740
Click to expand...
Click to collapse
Do not follow the instructions in that thread! It will permanently brick you if you're have the FireOS 5.1.1 bootloader. The OP of that thread finds it too hard to add a note that it's outdated. See the page 4, post #36
blueberry.sky said:
Do not follow the instructions in that thread! It will permanently brick you if you're have the FireOS 5.1.1 bootloader. The OP of that thread finds it too hard to add a note that it's outdated. See the page 4, post #36
Click to expand...
Click to collapse
I have 5.1.1... yeah, thanks.
blueberry.sky said:
Do you know if you had amazon FireOS ve wrsion 5.0.1 or 5.1.1?
Click to expand...
Click to collapse
I have 5.1.1.
blueberry.sky said:
Just to be clear, you have actually selected the adb sideload option on your Fire when you try to connect with adb on you pc, correct? ADB is not even active until the adb sideload option has been selected.
Click to expand...
Click to collapse
Yeah I selected apply update from adb, adb devices was blank, didn't work.
blueberry.sky said:
We can not "install" twrp. The bootloader is locked & won't allow it. We can only temporarily load twrp into memory. Each time we want to use twrp, we must connect usb to a pc, enter fastboot mode & load twrp. But this can only been done on 5.0.1 Fires. It's been blocked on 5.1.1. No way to load twrp at all on 5.1.1.
Click to expand...
Click to collapse
I went into fastboot mode, installed twrp, and nothing happened because yes, its 5.1.1.
I've seen some other people who also have been unable to get adb to work (in custom recovery). I don't recall a solution.
There is an option in fastboot to flash firmware, I haven't seen anyone try that yet..
blueberry.sky said:
I've seen some other people who also have been unable to get adb to work (in custom recovery). I don't recall a solution.
There is an option in fastboot to flash firmware, I haven't seen anyone try that yet..
Click to expand...
Click to collapse
Do you have any ideas on how to do this? I would greatly appreciate it.
Thank you!
Since I haven't read anyone try it before, there would be some risk. I suppose you are already bricked, seemingly without a way to fix it, but you could brick it harder. You might be able to get adb working. I may not have any ideas on how to get adb working for you, but someone else might know. If you try flashing the stock OS via fastboot, there is a chance you could brick it in a different way.
The command would be
Code:
fastboot update <filename-of-stock-firmware.zip>
But we don't have a .zip stock firmware file. In twrp recovery you can just rename the .bin file to .zip & it works. Not sure if that will also work for fastboot. My guess is it won't work & might brick you.
Also be aware, on Fires that self-updated to FireOS 5.1.1 (or came with 5.1.1 new) you must only flash 5.1.1. Attempting to flash 5.0.1 will brick it 100% of the time & it's unrecoverable.
drillster said:
No matter what I'm doing, whenever I do adb devices, I always get:
List of devices attached
. . .
Click to expand...
Click to collapse
Just a shot in the dark here, but have you gone into device manager while in sideload mode and updated drivers for KFFOWI under Other devices? Windows needs drivers for every mode.
I have same issue.
[QUOTE=drillster;64617577]Hey everybody!
This is my first time posting something on XDA. This is really cool.
So I just bricked my fire, hard. Let's start from the top:
- I used the super tools rootjunkysdl.com/?device=Amazon%20Fire%205th%20gen&folder=SuperTool to get the google play store.
- Using the google play store, I got flashfire.
- Using flashfire, I flashed SlimLP onto my tablet successfully and quickly.
- I got a little cocky, and based on the comments on the youtube.com/watch?v=NaCBSuUuhRE video that I used to flash SlimLP I decided to try the flashfire technique with CM since it is my favorite ROM.
- I did everything properly and the same, but... it got stuck here... for about an hour...
imgur.com/QJvmRz3
So I decided to do the smartest thing ever and cancel it myself by turning it off, I wasn't able to do anything else anyway. Either way, my tablet is now stuck in the cyanogen 12 boot load animation, the one of the cute blue head with the radar effect.
I would of fixed this a long time ago, but for some reason I'm not able to adb sideload.
I go into fastboot, I can detect the device, but not adb sideload.
I go into adb sideload mode, I can't detect the device, so definitely not sideload. :/
I've tried updating my drivers, I don't know if I'm doing it right, but while it was in fastboot mode, I changed it to Android Composite ADB Interface, and that didn't change anything.
No matter what I'm doing, whenever I do adb devices, I always get:
List of devices attached
Blank. Nothing. Only when I'm in fastboot mode do I get:
fastboot devices
G0K0H40454261ARU fastboot
Something, but still no ADB. I can't even load TWRP here, tried that, I just install it and it just sits there dumbly saying it's installed.
I'm bricked just like my tablet. Could I please get some help here? I'm very desperate to get this tablet back up and running, and I feel so stupid for not having stuck with Slim and trying to install CM. I really don't want it to stay bricked like this.
Thank you, XDA![/QUOTE]
I did the same thing. Slim worked great, tried to flashfire CM12, ot bricked. Can get fastboot, but nothing else. Afraid to try update from fastboot.
I just want to say thanks to everybody who contributed, I'm really appreciative of the support, especially because I didn't expect it, haha! Listening to blueberry.sky I'm going to try the flashboot update, because it's either that or a bricked device. School just started so I got busy with that.
DoLooper said:
Just a shot in the dark here, but have you gone into device manager while in sideload mode and updated drivers for KFFOWI under Other devices? Windows needs drivers for every mode.
Click to expand...
Click to collapse
So when I have it in adb mode, the fire doesn't seem to show up anywhere in any of my devices, and I can only find it when it's in fastboot mode. So when it's in that mode, I've tried Android ADB Interface, Android ADB Composite Interface, and when I go back to adb sideload, it's just not there in device manager. I don't know what this means, so any speculation? But no matter what mode I'm in or what driver I'm using, I can't seem to get it to show up in adb when in sideload mode.
Again, thanks everybody, and I hope anybody else in the future with this issue can refer to this thread for a lead!
So I just tried to flash update the firmware from Amazon amazon.com/gp/help/customer/display.html?nodeId=201830180 which I renamed from .bin to .zip:
C:\path\to\SuperTool>fastboot update update-kindle-global-37.5.4.1_user_541112720.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
I didn't rename the Slim and this is what I get:
C:\path\to\SuperTool>fastboot update Slim-ford-5.1.1.build.2.2b-20151210.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Is there anyway I can resolve this, so I can do SOMETHING?
Thank you!
drillster said:
So I just tried to flash update the firmware from Amazon amazon.com/gp/help/customer/display.html?nodeId=201830180 which I renamed from .bin to .zip:
Is there anyway I can resolve this, so I can do SOMETHING?
Thank you!
Click to expand...
Click to collapse
To be clear, you were able to, "adb sideload update-kindle-global-37.5.4.1_user_541112720.bin". To restore your Fire OS 5.1.1?
thekrakah said:
To be clear, you were able to, "adb sideload update-kindle-global-37.5.4.1_user_541112720.bin". To restore your Fire OS 5.1.1?
Click to expand...
Click to collapse
No, I did fastboot update in fastboot mode as suggested by blueberry.sky since ADB isn't working for reasons I stated before.
C:\path\to\SuperTool>fastboot update update-kindle-global-37.5.4.1_user_541112720.zip
drillster said:
No, I did fastboot update in fastboot mode as suggested by blueberry.sky since ADB isn't working for reasons I stated before.
C:\path\to\SuperTool>fastboot update update-kindle-global-37.5.4.1_user_541112720.zip
Click to expand...
Click to collapse
So when you say you go into "adb sideload mode. You selected "apply update from adb", and the Fire device is actively waiting for the sideload command, but you got nothing showing up in your device manager at that point?
I'm just clarifying because until the "apply update from adb" is activated, windows doesn't get a communication from the Fire device.
thekrakah said:
So when you say you go into "adb sideload mode. You selected "apply update from adb", and the Fire device is actively waiting for the sideload command, but you got nothing showing up in your device manager at that point?
I'm just clarifying because until the "apply update from adb" is activated, windows doesn't get a communication from the Fire device.
Click to expand...
Click to collapse
On my device, I can get fastboot, but not adb. if I reboot from fastboot, I only get the
CM logo and it sticks there permanently until I power off. When I boot to fastboot, the screen is blank but my Windows PC can see the device and return the SN. I can issue the command to reboot to bootloader, but reboots to fastboot with "fastboot" in small letters at the bottom of the screen. What else can I try? Thanks for all the help offered so far.
What happens when you try to get into recovery mode?
To get into recovery you start with the Fire off. Turn off by holding power button until it goes off (might take awhile). I just tried turning off from fastboot mode. Took only about 14 seconds of holding power.
To enter recovery: hold volume down button + hold power button.
blueberry.sky said:
What happens when you try to get into recovery mode?
To get into recovery you start with the Fire off. Turn off by holding power button until it goes off (might take awhile). I just tried turning off from fastboot mode. Took only about 14 seconds of holding power.
To enter recovery: hold volume down button + hold power button.
Click to expand...
Click to collapse
When I try to get into recovery, it boots with a blank screen. At that point, I can connect to my PC, type fastboot devices, and it will show me device. Then I try to reboot-bootloader, and it reboots to fastboot, but this time it says fastboot on the screen. I can't seem to get to recovery
watch this video to see if it helps.
https://www.youtube.com/watch?v=RQLoH-ahjy4
Hey everyone
Not sure if anyone can help
I just got some used 5th gen tablets, they were in a storage unit i just purchased. I turned on one of the fire units and it says it was a kids fire, so no real use to me. I hit power to standby and left it in my office, went back to list it and it was updated with new software. The second one, seems like it is stuck in a boot loop, comes on and goes off again. So i looked at the one that updated, said it now updated, had 5.6 on it, so i said maybe i could use it. Did some research, read you can but just android on it.
Well, i read you have to downgrade to 5.3 or older to install android. Not even sure if this is right.
So i followed some youtube genius with software from rootjunky.
I used the adb to flash update-kindle-global-37.5.4.2_user_542168620.bin
Everything was working, installing 100%, then i unplugged and selected 1 from the tablet to reboot.
Needless to say, nothing comes on now, no logo, no nothing, will not respond to recovery mode, down and power.
I just tried taking the back off and unplugging the battery and holding power 20 secs, nothing.
Anyone have any ideas to salvage these, or one of them or are they paperweights haha?
Good news is, the unit had all kinds of stuff in it, i have made my money back already, these were just bonus
Any help would be great, thanks
vetteguy82 said:
Hey everyone
Not sure if anyone can help
I just got some used 5th gen tablets, they were in a storage unit i just purchased. I turned on one of the fire units and it says it was a kids fire, so no real use to me. I hit power to standby and left it in my office, went back to list it and it was updated with new software. The second one, seems like it is stuck in a boot loop, comes on and goes off again. So i looked at the one that updated, said it now updated, had 5.6 on it, so i said maybe i could use it. Did some research, read you can but just android on it.
Well, i read you have to downgrade to 5.3 or older to install android. Not even sure if this is right.
So i followed some youtube genius with software from rootjunky.
I used the adb to flash update-kindle-global-37.5.4.2_user_542168620.bin
Everything was working, installing 100%, then i unplugged and selected 1 from the tablet to reboot.
Needless to say, nothing comes on now, no logo, no nothing, will not respond to recovery mode, down and power.
I just tried taking the back off and unplugging the battery and holding power 20 secs, nothing.
Anyone have any ideas to salvage these, or one of them or are they paperweights haha?
Good news is, the unit had all kinds of stuff in it, i have made my money back already, these were just bonus
Any help would be great, thanks
Click to expand...
Click to collapse
Permanently bricked; can't downgrade below 5.4. Sell it for parts or take it to the target range.
Thanks
Thanks for the reply
Ok, so the one that will not turn on at all , well technically it must be on when i plug it into my pc, it does chime, and then a few seconds later it chimes again. Like it is turning itself on and off, but because you can not see anything on the screen, you can not tell.
What about the second one? It turns on and you see amazon, but then it turns itself off. It does let you go to fastboot and recovery in the corner of the screen using the buttons. However, all you see is that, recovery only says recovery, does not go into the recovery menu.
Any ideas if the second one is recoverable?
Thanks
vetteguy82 said:
Thanks for the reply
Ok, so the one that will not turn on at all , well technically it must be on when i plug it into my pc, it does chime, and then a few seconds later it chimes again. Like it is turning itself on and off, but because you can not see anything on the screen, you can not tell.
What about the second one? It turns on and you see amazon, but then it turns itself off. It does let you go to fastboot and recovery in the corner of the screen using the buttons. However, all you see is that, recovery only says recovery, does not go into the recovery menu.
Any ideas if the second one is recoverable?
Thanks
Click to expand...
Click to collapse
If you can not access the stock recovery menu there is no known method for recovering these devices with one exception: early build devices (bootloader version 5.00 & 5.01) can boot a twrp image from fastboot. If that works you'll be able to install a custom ROM (two choices) assuming nothing else is wrong with the hardware.
fastboot boot <twrp.img>
thanks
I must be doing something wrong again, i download the twrp.imga dn saved it in the fast boot adb folder. I put the kindle in fastboot mode, and plugged into pc, driver installed, from folder i went in to command prompt. in command prompt i added fastboot twrp.img and hit enter command prompt shows all the command prompts and definitions.
Is there something else i should do?
Thanks
Davey126 said:
If you can not access the stock recovery menu there is no known method for recovering these devices with one exception: early build devices (bootloader version 5.00 & 5.01) can boot a twrp image from fastboot. If that works you'll be able to install a custom ROM (two choices) assuming nothing else is wrong with the hardware.
fastboot boot <twrp.img>
Click to expand...
Click to collapse
vetteguy82 said:
I must be doing something wrong again, i download the twrp.imga dn saved it in the fast boot adb folder. I put the kindle in fastboot mode, and plugged into pc, driver installed, from folder i went in to command prompt. in command prompt i added fastboot twrp.img and hit enter command prompt shows all the command prompts and definitions.
Is there something else i should do?
Thanks
Click to expand...
Click to collapse
You need to install this tool on the host PC. Make note of the installation folder as you will need to execute the fastboot command from there. You'll also need to copy any necessary files (eg: twrp image) to that folder unless versed in referencing other folders from the command prompt.
Keep in mind it is highly unlikely your looping device will be able to boot twrp. Only the earliest models had this vulnerability which Amazon quickly plugged.