Database Develop

[Q] Phone not booting.

Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.

Antonnzr said:
Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.
Click to expand...
Click to collapse
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.

DFornazari said:
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.
Click to expand...
Click to collapse
I have used nightly builds of CM10 from October 15 onwards with a problen
only on the 19th release when I couldn't install anything due to an issue with
the version of Clockworkmod Recovery. Once I found out how to downgrade
that version, it's all fine (touch wood).
Sam

@Antonnzr
Rather just use normal GAPPS. There was a release by tantrums that caused bootloop, but he fixed it now.
Use ADB to go back to recovery.
@DFornazari
CM10 isn't heavy at all. rmcc committed a lot of changes from TI's branch and I think it caused some instability with the some of the newer releases. I based that speculation from a comparison between nightlies before the changes was made and after the changes was made. I didn't look at the code so I can't be 100% certain since I don't know what they changed. rmmc is a great dev and should have all the device specif bugs sorted soon.

Yes its all working fine now with cm10 m2 and regualr gapps but I have a new issue.
Whenever I try to download an app from the Play Market ( nova launcher, for example ) it pops up with an error reading:
"Error: 'Nova launcher' could not be downloaded due to an error (927)"
or alternatively:
"Error: 'Nova launcher' could not be downloaded due to an error ( error retrieving information from the server )"
Tried to install apps via online Play Store both on my phone and my laptop but the download never starts. Help?
Disregard that, fixed after reflash.

[Q] No booting after installing CM 7.2

Hello everyone,
I just tried to install the stable version of CM 7.2 (cyanogenmod) and I kind of have a little problem: after rooting the device as described by iProHackr in one of his videos on youtube (Unlock Root 2.4.2 did not work for me), I used the Clockworkmod Rom Manager, downloaded from there the stable version of CM 7.2 and started the installation. The Rom Manager asked me before, if I wish to do wipe the cache and dalvik cache, as well as backup the current os. I selected all options and then the installation started normally.
After some time, the phone rebooted (as part of the installation), but it's stuck at the LG boot logo. I can see the LEDs blinking, but nothing has happened for aprox. 2 hours. The phone does not boot.
What should I do next? Should I reboot in recovery mode and try to repeat the procedure? If yes, how do I boot into recovery mode?
Thanks in advance.

Problem solved. I don't know what the problem was, but I made the same steps one more time, wiped the data and cleared the cache, installed the cm 7.2 again and after a couple of minutes, the phone started successfully.

[Q] SGT7 OmniRom 4.4.2 official nightly SystemUI has stopped working

Good day. New member here but long time lurker, can't post on official android development yet.
I've been able to flash terenceng's cm11 on my p1000 with no problems. Today I just saw the official Omnirom nightly builds and I wanted to try them out. http://forum.xda-developers.com/showthread.php?t=2634278
When I flashed the rom, on bootup a popup shows up with "unfortunately systemui has stopped working". I can't even use the rom as the status bar is always crashing. For now I reverted to cm11.
Is this just a bug on the nightly build? or did I do something wrong?
Steps done: wipe data, factory reset, wipe cache, dalvik cache, flash, reboot.

did you try to format /system as well? Actually you should be doing that each time you flash a ROM.

yup i also wiped system and android secure..

[CM 13] Bootloops after installing nightly updates

Hi guys!
my phone seems to have issues with dirty flashes.
A few days ago i successfully clean installed cm 13 from stock. so far, so good.
I decided to use the nightly updates so i downloaded the latest build from the built in updater(i also tried to install the nightlies manually but still no success)
The installation by itself did not show any errors but when i reboot the phone from the recovery(TWRP) it gets stuck in a bootloop. this happened with every nightly so far but when i clean installed them they worked fine.
Am i doing something wrong and does anybody experience the same issue?
i appriciate every tip on how to solve this problem because i am not going to clean install the nightlies and set up the phone over and over again
thanks in advance
Jurac aka. mynameisnotraphael

Have you tried wiping cache and dalvik?
Sent from my Moto G 2014 using Tapatalk

Custom ROMs Bootloop

hey guys so i couldnt think of a title which accurately describe my problem so there it is
For the past 2 months i have been on AOKP Nougat for my sm-g800f (UK) (EE) and it has been running perfectly fine except the odd random restarts but nothing more. Just 2 days ago it started freezing a lot, unresponsive screen, restarting more often keep in mind i did not install anything new or tweak anything. So i decided to do a fresh install and also try a new rom.
I have tried 3 custom roms:
1. First i tried beanstalk the nougat version and i managed to install it but 30 minutes into use i got constant reboots:crying:
2. Resurrection Remix was next this rom took many many tries to install as the phone kept constantly rebooting through the setup process and i ran into other problems such as 'setting has stopped' and 'setup wizard has stopped'. finally after many attempts and with perseverance which manifested from i dont know where i installed it:victory: along with Gapps but just like beanstalk after 30min the same problem, constant reboots
3. the third is what i just tried aokp nougat which is right now constantly rebooting not even allowing me to set it up.
(btw between each install i did factory resets and data wipes and even wiped internal and external storage)
i have twrp 3.1.1.0-0 installed which works perfectly fine but the latest version caused problems whcih is why i am not using it.
the kernel is default.
There was one fix.... after the millionth factory reset before installing kernel 3 but after trying kernel 2 i odin flashed a clean stock 6.0.1 which worked perfectly, no restarts or freezing or anything.
However i do not want that so i flashed twrp and installed AOKP along with Gapps and here i am in a bootloop.
(note i can still access recovery even now)
my preffered setup rn is resurrection remix nougat with spookcity 1.5ghz kernel if that can be done idk
thank you and i hope u can help me
edit: atm when im in twrp on my pc the phone is shown as SM-G800 (no f )

Hi, had the same problem for months.
Succeeded yesterday for G800F with :
- complete wipe except MicroSD
- Lineage OS 14.1 August build
- AddonSu from LOS extra
- OpenGApps Nano ARM 7.1
- Spookcity Kernel 1,5 GHz.
Keep in touch.
I'll update my tutorial once I'm back home.