If u have a stock marshmallow os on android one devices then u can't root and install custom recovery without pc
To root and install custom recovery on marshmallow KitKat and lollipop then go to this link forum.xda-developers.com/crossdevic...oolbox-android-one-toolkit-one-click-t3030165 hit thanks button to the devloper and download the android one toolkit from the topic.
After download the android one toolkit u need drivers (the drivers make connection between ur pc and android the link for drivers is here www.theandroidsoul.com/download-mic...ivers-usb-adb-windows-8-1-8-7-vista-xp-64358/
After download the drivers install it to ur pc after installing the drivers restart ur pc then download universal adb drivers www.koushikdutta.com/post/universal-adb-driver
And then connect ur android one to pc then install android one toolkit to pc and click on unlock the phone automatically boot into fastboot if does boot in 5 minute then boot into fastboot with pressing volume up+power button after switch off and then u see recevery and fastboot then control through volume up and click on fastboot with volume down key
After go to fastboot its automatically unlock bootloader and wipe all of data in the phone then choose which recovery shoots on u then click on that the android one automatically boot into fastbooy and now u got a custom recovery
Dont forgot to hit thnks button all credit goes to the devlopers not me:thumbup:
in general we can find many thread like this
u on wrong section dude
Related
To flash stock recovery without SDK files follow this
Note: Only for for MT6582 devices. if MTxxxx Devices want then use their device supported SP Tool and drivers.
Requirements
1.Stock Rom. Karbonn,Micromax and Spice, any one would work.
2.SP Flash tool.
Download: Download here
3.Drivers.
Download: Download here
4.Unlocked bootloader.
Instructions
1. Extract the stock rom where ever you want.
2.Start SP Tool.
3.Select "Scatter loading" and navigate where you have extracted stock rom and select the scatter file.
4.After selecting, you will get many options with a tick at the left side, Untick all options and only tick recovery.
5.Switch off your device and remove battery.
6.Click "Download" button in SP Tool
7.Now connect your device with a usb and press the volume keys so that it detects faster.
8.Now just wait and SP Tool will flash the recovery. After its successful, you will get a green circle at center of the screen.
Done. You have successfully flashed stock recovery.
Hit thanks if you like my work.
XDA:DevDB Information
Flash Stock Recovery , Tool/Utility for the OEM Cross Device Development
Contributors
Devam03
Version Information
Status: Stable
Created 2015-01-24
Last Updated 2015-01-24
Am with spice dream uno, boot loader unlocked, rooted....... Whenever am connection phone without battery to PC(tried on windows 7, windows 8 and xp also) it detects a hardware as preloader mt... but in a second it disappears again it get detected and again disappears and same continues...all the time there is a sound of connecting and disconnecting of hardware comes.. Any idea why, any solution do you have? Tried all kernels, even with stock kernel same happens continuously.. Cant flash with SP flash tool because of this
nanachitang420 said:
Am with spice dream uno, boot loader unlocked, rooted....... Whenever am connection phone without battery to PC(tried on windows 7, windows 8 and xp also) it detects a hardware as preloader mt... but in a second it disappears again it get detected and again disappears and same continues...all the time there is a sound of connecting and disconnecting of hardware comes.. Any idea why, any solution do you have? Tried all kernels, even with stock kernel same happens continuously.. Cant flash with SP flash tool because of this
Click to expand...
Click to collapse
Check that,
First press download button and then connect to pc
Hey Guys
Whenever I turn on my phone it goes into fastboot mode, I am not sure why.
I have tried using fastboot reboot in adb but it still reboots into bootloader(keep in my mind i don't write reboot bootloader)
I even flashed the stock rom using SP Flash tool but even then I don't seem to have any luck.
I tried holding the upper volume button and the power button but it still doesn't reboot into recovery and just gives me a faint text saying "-> FASTBOOT MODE"
the phone can;t even boot into META Mode
Every and any help at all is appreciated
If you have TWRP recovery, try to install a custom ROM or the Stock Rom , Or try to enter in the fastboot and in the pc you download the ADB and install TWRP for you phone (I solved this problem via this method, You can find tutorial about this in internet) I am not responsible for any damage that may occur to your device (You can starts in the bootloader mode pressing Volume Down and the power key)
Hi all..
I flashed the latest Radian kernel in my lenovo k6 power. Feb 2019 build. But after flashing it from TWRP, it boots in fastboot mode and never starts normally. My os is RR remix oreo v 8.1.0 . Please help.. what should I do to flash it properly.
MultiLaserGames said:
If you have TWRP recovery, try to install a custom ROM or the Stock Rom , Or try to enter in the fastboot and in the pc you download the ADB and install TWRP for you phone (I solved this problem via this method, You can find tutorial about this in internet) I am not responsible for any damage that may occur to your device (You can starts in the bootloader mode pressing Volume Down and the power key)
Click to expand...
Click to collapse
Please somebody tell me which is the latest kernel build for RR oreo 8.1.0, for lenovo k6 power.
Hi, this is my first post on this forum.
At the beginning I'm sorry for bad English, I am using the translator.
I have a lenovo k3 note and everything worked as it should have, until it returned from China (I sent it there, then I received a reply that the screen is damaged, do I decided to fix it here, in Poland).
Currently, I cannot install CWM or TWRP. I tried to do it in many different ways. When the phone turned off, I hold volume buttons and power, but then it showed me a message at the bottom of the screen: fastboot mode.
I tried to install twrp or CWM using adb commands. I was just trying to run recovery using commands. I also tried different versions of recovery using flashtool and the result was the same. Three buttons and a message about fastboot mode.
I can install new rom using only flashtoola and I did it. I currently have K50a40_S427_160518_ROW, android 6.0.
I read somewhere that I can have a locked bootloader. I tried the command fastboot oem unlock by adb but it did not work.
Please give me a hint or tell me what to do step by step, and I will still try to properly install twrp.
Thank you in advance.
Flashing recovery
You Can flash Recovery using SP flash tool if you have MT6752(check in device information) using this method or (if You Have other model please update the scatter file and recovery with yours)
Install all the drivers.
[*]Enable USB debugging and ALLOW OEM UNLOCK in settings.
Now download & extract SP flash tool from here
Now Download and extract TWRP recovery from here
Now, Go to Options>Download and check the two checkboxes
(Make sure Download only is selected)Load the Scatter file and click download button.
Connect your device Powered OFF
Check if recovery is Installed (if you Have Problems Rooting follow this Guide)
Ok, I get down to work. What is the decryption key to mega.nz to the link you provided?
Hi Guys,
When i try to unlock my le 2 bootloader through AIO toolkit i am getting error waiting for device then nothing happens.:crying:
I am on win 10.
Guys please help
Same problems found
Boot Le2 In To Fastboot Mode Manually
Run fastboot as administrator
When opening aio toolkit, open it as administrator
Hope that helps
If u are using windows the device is failed to find the driver so manually install adb drivers after that connect the phone then it will search for driver and it will say not found so got device manager and click le2 and u will find adb with ? Mark open it and press update driver and press manual search and type c drive . this search help you install adb drive
Prateekmvd said:
Same problems found
Click to expand...
Click to collapse
Google bootloader driver needed to be installed to run fastboot commands.My win 10 automatically downloaded google bootloader drivers after that i can run fastboot commands.
Just reboot your device manualy in boot loader by pressing power button + volume down ..And don't forrget to turn on usb debugging and ome unlock which you can find in developer menu
Hello . A few minutes ago, I had a problem with the TWRP flashing on my huawei p8 gra-ul00 phone .the adb has command's the twrp is complety flashed on my phone , but it did not come up on my phone(after pressing vol+ and power button's the phone will automatiocally go to huawei erecovery). But I took a little initiative and came up with a solution to this problem. I'm share this.
NOTICE : IF YOU HAVEN'T A USB DATA CABLE , PLEASE BUY IT , OTHERWISE CONTINUING THE STEPS WILL NOT SOLVE YOUR PROBLEM .
Before completing all the steps, connect the phone to the computer using data usb cable, then try to enter the recovery mode (for Huawei phones, hold the power button simultaneously with the volume down button for at least one minute.) If the phone Entered custom recovery, no need to do other steps.
1_First Of All , Unlock the bootloader , then reboot the phone
2_Download the custom recovery . IF YOU HAVE ISN'T A CUSTOM RECOVERY FOR YOUR PHONE , PLEASE SEND A COMMENT AND ENTER YOU PHONE MODEL AND A NAME OF THE CUSTOM RECOVERY YOU WANT TO USE TO IT. IM WILL SEND A REGUESTED CUSTOM RECOVERY FOR YOU IN LESS THAN A HOUR .
3_connect the phone to computer and Enable USB Debugging from Developer Options(go to settings>about phone , then 7 times tap on build number , then go back to settings and select developer options , search for "USB Debugging" Option and enable it.)
4_, install the adb and fastboot drivers(such as minimal adb and fastboot) then install the phone drivers . after installing drivers , reboot the computer , then open cmd and enter the command : adb reboot recovery
5_if a window showed on phone(such as allow usb debugging) , click on yes and retry the level 4 again
If you have any questions or problems , commend here.
Hy Bysoft!
I'm new in XDA but i alredy flash some devices with TWRP, it seems that something went wrong with the installation of twrp. Did you try to boot into bootloader (adb reboot bootloader) and then flash the TWRP image with fastboot (fastboot flash recovery twrp.img) and then type fastboot reboot?
I find that list of command: adb reboot etc.. in your device page of TWRP (https://twrp.me/huawei/huaweip8.html). In this site you find the TWRP image for your device, you have to use this image when you flash with fastboot (fastboot flash recovery twrp.img where twrp.img is the image that you downloaded in TWRP site).
PrintHelloPeople
PrintHelloPeople said:
Hy Bysoft!
I'm new in XDA but i alredy flash some devices with TWRP, it seems that something went wrong with the installation of twrp. Did you try to boot into bootloader (adb reboot bootloader) and then flash the TWRP image with fastboot (fastboot flash recovery twrp.img) and then type fastboot reboot?
I find that list of command: adb reboot etc.. in your device page of TWRP (https://twrp.me/huawei/huaweip8.html). In this site you find the TWRP image for your device, you have to use this image when you flash with fastboot (fastboot flash recovery twrp.img where twrp.img is the image that you downloaded in TWRP site).
PrintHelloPeople
Click to expand...
Click to collapse
Hello .
I am also a newcomer
it's true . I also installed TWRP 3.1.1 on the phone in the same way
Thanks for sharing your opinion with me and other XDA users
Regards ,