Full stock LVY48H on Fi . I've been wanting to go Marshmallow, but Google hasn't gotten around to sending me the OTA. I found this thread in the General forum and downloaded the appropriate .ZIP, but the contents don't look a bit like the ROM downloads, so fastboot doesn't appear to be an option. How do I put it on?
Download factory image, extract, flash each img file separately except for userdata.
Mostlyhrmlss said:
Full stock LVY48H on Fi . I've been wanting to go Marshmallow, but Google hasn't gotten around to sending me the OTA. I found this thread in the General forum and downloaded the appropriate .ZIP, but the contents don't look a bit like the ROM downloads, so fastboot doesn't appear to be an option. How do I put it on?
Click to expand...
Click to collapse
If your bootloader is unlocked, you can flash it manually in ABD or use that toolkit (for factory image). I did that but it it also wiped my phone, which was fine by me, it needed a good cleaning after flashing updates to another custom 5.1.1 rom over and over again!
@nhizzat: I was thinking that, but I'd only done a factory load that way and wasn't sure if I could do a full version jump without cats and dogs living together and mass hysteria (i.e. having to reload all the personals), so I was happy to find that OTA thread. Shame they didn't bother with practical matters such as what to do with that information.
@Tower1972: Attached is a screenshot of the contents of the ZIP. How would I go about flashing that with ADB?
Mostlyhrmlss said:
@nhizzat: I was thinking that, but I'd only done a factory load that way and wasn't sure if I could do a full version jump without cats and dogs living together and mass hysteria (i.e. having to reload all the personals), so I was happy to find that OTA thread. Shame they didn't bother with practical matters such as what to do with that information.
Click to expand...
Click to collapse
RTFM
Tower1972 said:
If your bootloader is unlocked, you can flash it manually in ABD or use that toolkit (for factory image). I did that but it it also wiped my phone, which was fine by me, it needed a good cleaning after flashing updates to another custom 5.1.1 rom over and over again!
Click to expand...
Click to collapse
when youre giving advice to someone, make sure that its correct. you dont flash anything with adb, you use fastboot. fastboot is different than adb.
@boomerbubba: FTFY: Here's a guide on how to do that. I prefer civility when applicable; my sympathies for whatever is going on in your life to make you want to answer in such a way.
@simms22: Turns out the advice was correct: "adb sideload [OTA file].zip" is the appropriate command to accomplish what I'm after here.
Some strategic Googling found me the answer while I was awaiting responses, here it is for the benefit of anyone who should have the same question. Prollyshooda done that first.
Mostlyhrmlss said:
@boomerbubba: FTFY: Here's a guide on how to do that. I prefer civility when applicable; my sympathies for whatever is going on in your life to make you want to answer in such a way.
@simms22: Turns out the advice was correct: "adb sideload [OTA file].zip" is the appropriate command to accomplish what I'm after here.
Some strategic Googling found me the answer while I was awaiting responses, here it is for the benefit of anyone who should have the same question. Prollyshooda done that first.
Click to expand...
Click to collapse
actually, you were incorrect. you said use adb to manually flash. now you said adb for adb sideload. those are two completely different things. all adb sideload does is move a file from your computer to your phone.
edit.. now you are right, i read your response wrong :angel:
Contrition on the Internet? Whodathunkit! We should get together for a beer, I like your kind of folk.
Mostlyhrmlss said:
Contrition on the Internet? Whodathunkit! We should get together for a beer, I like your kind of folk.
Click to expand...
Click to collapse
contrition is one of the things that pull me down. but its honesty, and the truth. so i stay with it
Mostlyhrmlss said:
@nhizzat: I was thinking that, but I'd only done a factory load that way and wasn't sure if I could do a full version jump without cats and dogs living together and mass hysteria (i.e. having to reload all the personals), so I was happy to find that OTA thread. Shame they didn't bother with practical matters such as what to do with that information.
@Tower1972: Attached is a screenshot of the contents of the ZIP. How would I go about flashing that with ADB?
Click to expand...
Click to collapse
I don't know what zip file that is, but it's not a factory image from Google. If you download a factory image from Google, you extract every img file and flash using fastboot.
What is everyone's fascination with adb sideload?
nhizzat said:
What is everyone's fascination with adb sideload?
Click to expand...
Click to collapse
It doesn't require an unlocked bootloader. Which for the people that haven't done that, it wipes your phone as part of the unlock process.
Also, it is a smaller download if you are on an ISP with limited bandwidth.
Google says....
http://https://developers.google.com/android/nexus/images
That will get you going, but since the included script won't work, you have to unzip the zip package, what you will find inside the parent folder. Happy flashing
nhizzat said:
I don't know what zip file that is, but it's not a factory image from Google. If you download a factory image from Google, you extract every img file and flash using fastboot.
What is everyone's fascination with adb sideload?
Click to expand...
Click to collapse
That ZIP is an OTA downloaded from the thread referenced in my original post. My fascination with adb sideload (now that I know what it is) is that I can accomplish an upgrade with a single command, which suits my advanced case of laziness very well . Seems much easier than unzipping a file, then unzipping a file from that file (more than doubling the storage requirement, I have a rather small SSD) and issuing several fastboot commands with slightly different syntaxes and hoping I didn't miss (or mistype) something.
I already know how to do a full flash, I unlocked the bootloader and did so first thing when I bought it used to make sure it was cleared of the previous owner's data and completely up-to-date. What I wasn't sure of is if it would be safe to do so for a full version jump. I'm much more comfortable with OTAs since I've applied several and it stands to reason that a carrier would never issue one if it might cause an undue number of problems for their support staff to address.
Martend said:
That will get you going, but since the included script won't work...
Click to expand...
Click to collapse
That script just burns my biscuits. Why in the name of all that is neat and groovy can't Google fix such a basic problem?
Mostlyhrmlss said:
That script just burns my biscuits. Why in the name of all that is neat and groovy can't Google fix such a basic problem?
Click to expand...
Click to collapse
because its fixed in the latest version of fastboot, that no one seems to be using..
simms22 said:
because its fixed in the latest version of fastboot, that no one seems to be using..
Click to expand...
Click to collapse
Why break it in the first place? lol It's the first thing you learn here, debug & test before releasing it to the masses
So, I got the latest ADB and FASTBOOT from here, put the device in ADB update mode through recovery mode (already OEM unlocked and USB debugging enabled), ran 'adb sideload <filename>' as instructed onscreen, and got "error: device (null) not found" from the command. The device shows up in the Windows device manager when in bootloader mode, but disappears when I go to recovery mode. What am I doing wrong?
Mostlyhrmlss said:
So, I got the latest ADB and FASTBOOT from here, put the device in ADB update mode through recovery mode (already OEM unlocked and USB debugging enabled), ran 'adb sideload <filename>' as instructed onscreen, and got "error: device (null) not found" from the command. What am I doing wrong?
Click to expand...
Click to collapse
do you have the drivers installed? fastboot wont see your device until then.
I installed the drivers as part of the ADB/FASTBOOT package referenced above, but that's not the problem: the device is not shown at all in the Windows device manager, as if it wasn't plugged in.
Related
Like the title says im after the system dump for this device, it has already been leaked as a few sites are reporting having it so if anyone has it or knows where to find it please share so i can extract wallpapers sounds apps etc to share
Any advice on how to do a system dump? I should have my First in a few days.
fungflex said:
Any advice on how to do a system dump? I should have my First in a few days.
Click to expand...
Click to collapse
I have mine right now but I don't know how to go about dumping the system.
rooobbbbb said:
I have mine right now but I don't know how to go about dumping the system.
Click to expand...
Click to collapse
Do you have the Android SDK installed and are familiar with using adb?
dstaley said:
Do you have the Android SDK installed and are familiar with using adb?
Click to expand...
Click to collapse
Absolutely to both.
rooobbbbb said:
I have mine right now but I don't know how to go about dumping the system.
Click to expand...
Click to collapse
Could you check to see if it's possible to disable LTE? or did AT&T do something to prevent that as it does on every phone but the iPhone?
Sent from my SAMSUNG-SGH-I747
rooobbbbb said:
Absolutely to both.
Click to expand...
Click to collapse
IIRC, you should just be able to `adb pull /system` to get the important bits. It's not a full dump, but I think you need root level access for that. And the only way I know how to get root access is to flash a zip through recovery, and TWRP/CWM hasn't yet been released for the First.
I couldn't disable LTE but I don't see why I would, the battery is awesome. Can't dump anything right now I'm out. Am I the only person with this phone already?
Sent from my HTC first using xda premium
rooobbbbb said:
I couldn't disable LTE but I don't see why I would, the battery is awesome. Can't dump anything right now I'm out. Am I the only person with this phone already?
Sent from my HTC first using xda premium
Click to expand...
Click to collapse
Well, considering that it doesn't come out until tomorrow, I'd be willing to say yes.
I was wondering why no one was posting anything about it. Lol
Sent from my HTC first using xda premium
So in all seriousness, I have the First, I have the bootloader unlocked via htcdev.com, I'm rather familiar with adb and fastboot, and I would love to upload a system dump if someone can tell me what commands to run.
I'm trying `adb pull /system` right now, but it's getting "permission denied" on some files, so I don't know how useful that will be. I've also tried looking around online, but just about everything I find is assuming that you already have a custom recovery or a rooted system; nothing wants to tell me how to get myself to that state from scratch, and I'm very hesitant to just start flashing stuff at random without a proper image dump to fall back to.
Anyone have a good idea where to start?
nuclear_eclipse said:
So in all seriousness, I have the First, I have the bootloader unlocked via htcdev.com, I'm rather familiar with adb and fastboot, and I would love to upload a system dump if someone can tell me what commands to run.
I'm trying `adb pull /system` right now, but it's getting "permission denied" on some files, so I don't know how useful that will be. I've also tried looking around online, but just about everything I find is assuming that you already have a custom recovery or a rooted system; nothing wants to tell me how to get myself to that state from scratch, and I'm very hesitant to just start flashing stuff at random without a proper image dump to fall back to.
Anyone have a good idea where to start?
Click to expand...
Click to collapse
Do you have a retail AT&T First? Can you confirm that retail AT&T First is unlockable via htcdev?
Sent from my SAMSUNG-SGH-I747
Yes, this is a retail model, and yes, the bootloader was unlocked via htcdev.com.
nuclear_eclipse said:
So in all seriousness, I have the First, I have the bootloader unlocked via htcdev.com, I'm rather familiar with adb and fastboot, and I would love to upload a system dump if someone can tell me what commands to run.
I'm trying `adb pull /system` right now, but it's getting "permission denied" on some files, so I don't know how useful that will be. I've also tried looking around online, but just about everything I find is assuming that you already have a custom recovery or a rooted system; nothing wants to tell me how to get myself to that state from scratch, and I'm very hesitant to just start flashing stuff at random without a proper image dump to fall back to.
Anyone have a good idea where to start?
Click to expand...
Click to collapse
Humor me for a moment, if you will. Connect your device to your computer and run `adb root`. You should get a permission denied error of some sorts. I'm curious to see if Facebook is shipping with root enabled.
dstaley said:
Humor me for a moment, if you will. Connect your device to your computer and run `adb root`. You should get a permission denied error of some sorts. I'm curious to see if Facebook is shipping with root enabled.
Click to expand...
Click to collapse
Code:
[email protected] ~/first » adb root
adbd cannot run as root in production builds
^C
nuclear_eclipse said:
Code:
[email protected] ~/first » adb root
adbd cannot run as root in production builds
^C
Click to expand...
Click to collapse
That's what I figured would happen! It looks like this may be an option to root the 4.1.2 build. It worked on the One S and the Nexus 7, which gives me hope.
dstaley said:
That's what I figured would happen! It looks like this may be an option to root the 4.1.2 build. It worked on the One S and the Nexus 7, which gives me hope.
Click to expand...
Click to collapse
No good, but thanks for providing the link. The only shot we have left is waiting for the RUU to be leaked so we can pull recovery out of it, and get a CWM/TWRP made from it.
What is RUU and how does that help us? Sorry, just coming from a Nexus-only world, so I'm not familiar with modern HTC/Samsung devices.
Sent from my HTC first using xda premium
RUU stands for ROM Update Utility and is a Windows executable file that can flash and restore a HTC device. There are ways to extract binaries from this file, and if there are no root exploits that will work on this phone, we will need to extract the original recovery.img from that RUU to build a custom recovery, in which at that point allows us to flash SuperUser.apk to get root.
TRF-Inferno said:
RUU stands for ROM Update Utility and is a Windows executable file that can flash and restore a HTC device. There are ways to extract binaries from this file, and if there are no root exploits that will work on this phone, we will need to extract the original recovery.img from that RUU to build a custom recovery, in which at that point allows us to flash SuperUser.apk to get root.
Click to expand...
Click to collapse
RUUs for the HTC One were first available on March 26, just about a month after its announcement (and, oddly, a few weeks before it's general release). Since these have to be leaked by HTC, there's no telling when we will see those. Is there any chance another root exploit exists in stock Android 4.1.2 that we could exploit in order to get root?
all,
it was with reckless abandon and blind/naive decisions that got me to this point. i will just lay it all out what ive done in the hopes one of you brilliant minds will lead me into the light. before i lay out the steps in which ridiculous choices led me to this conundrum, here is the question...
Where do i go from here to resolve the issue that i have and can get into bootloader (tampered/unlocked and in S-ON) but i have no operating system?
keep in mind that Ive probably and admittedly should not have been dabbling in things i had no business doing with the little to no proper due diligence...."i am awarded no points and may god have mercy on my soul!!!!!!!!!!!!"
1) i used the htc dev process to unlock my bootloader and it worked well.
2) i then proceeded to flash some custom recovery .img files via "fastboot flash recovery <insert filename here" and the .img at the end of course.
recovery-clockwork-touch-6.0.3.4-m7 <---didnt take the first time or anytime. kept saying "entering recovery" but then the screen would go black, not boot into the recovery screen and then the phone would reboot as it would normally and go into stock OS
i then tried the following .img files below, all with the same result...
openrecovery-twrp-2.6.0.1-m7
openrecovery-twrp-2.6.0.0-m7
openrecovery-twrp-2.5.0.0-m7
recovery-clockwork-6.0.3.2-m7ul <<<---this was the only recovery .img file that would take so i then decided to play around with the options.
3) i then proceeded to make another ridiculous choice. under one of the options in clockwork recovery "classic" menus i went forth and selected the "wipe data/factory reset" option.
so what i have now is i believe a htc one sprint phone that has bootloader unlocked with what i believe is no OS. i hear on my computer the sound when it connects via "fastboot usb" but obviously the computer doesn't recognize it so i can copy and paste a zip file onto it.
i was looking at a few threads here and could really use some guidance/encouragement. the threads are
http://forum.xda-developers.com/showthread.php?t=2277892 <<< the FAQ sticky
http://forum.xda-developers.com/showthread.php?t=2368907 <<< the [ROM] stock sprint one 1.31.651.2 thread
http://forum.xda-developers.com/showthread.php?t=2368907 <<< the [RUU] sprint htc one 1.29.651.10 thread
what would be the best course of action for me to take? bear in mind that the end result would probably be obviously a working phone, probably stock or w/e seems best.
thank you for taking the time in reading my post. if you require any additional information, please ask. i am probably leaving out important pieces of info.
deadly
All you need to do is fastboot flash recovery a working recovery then check and see if adb works for you in recovery.
If it does then you can adb push a Rom to /sdcard and flash it in the recovery.
Sent from my HTCONE using xda app-developers app
insuusvenerati said:
All you need to do is fastboot flash recovery a working recovery then check and see if adb works for you in recovery.
If it does then you can adb push a Rom to /sdcard and flash it in the recovery.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
thank you for your quickresponse.
as i am very very "scared" to this up any further. what would the suggested "working recovery" file i should choose and then what rom should i use? honestly im tempted at the stock one that i linked but im worried that if that doesnt go smoothly, i will lose my unlocked bootloader feature.
deadlytwin said:
thank you for your quickresponse.
as i am very very "scared" to this up any further. what would the suggested "working recovery" file i should choose and then what rom should i use? honestly im tempted at the stock one that i linked but im worried that if that doesnt go smoothly, i will lose my unlocked bootloader feature.
Click to expand...
Click to collapse
Use this tool, you cant mess up http://forum.xda-developers.com/showthread.php?t=2236814 just make sure you use the Sprint recoveries and download and sideload a sprint Rom.
Konfuzion said:
Use this tool, you cant mess up http://forum.xda-developers.com/showthread.php?t=2236814 just make sure you use the Sprint recoveries and download and sideload a sprint Rom.
Click to expand...
Click to collapse
THANKS! i saw this thread earlier. ill take a look. ive at least watched wwjoshdew's video and i think that should work too. downloading the stuff now.
just tried wwjoshdew's directions. looks like i cant do the RUU 1.29xxxx. it goes through all the steps but at the end it says error because of the 1.31xxxx version i have already. i guess that means i have to wait until someone releases an RUU for 1.31.651.2
and if i am not sure if usb debugging mode ins enabled and i cant get back into normal bootup for the phone because i think i wiped my OS like stated in my first post. is my next step to do hansoon's AIO tool kit?
deadlytwin said:
all,
it was with reckless abandon and blind/naive decisions that got me to this point. i will just lay it all out what ive done in the hopes one of you brilliant minds will lead me into the light. before i lay out the steps in which ridiculous choices led me to this conundrum, here is the question...
Where do i go from here to resolve the issue that i have and can get into bootloader (tampered/unlocked and in S-ON) but i have no operating system?
keep in mind that Ive probably and admittedly should not have been dabbling in things i had no business doing with the little to no proper due diligence...."i am awarded no points and may god have mercy on my soul!!!!!!!!!!!!"
1) i used the htc dev process to unlock my bootloader and it worked well.
2) i then proceeded to flash some custom recovery .img files via "fastboot flash recovery <insert filename here" and the .img at the end of course.
recovery-clockwork-touch-6.0.3.4-m7 <---didnt take the first time or anytime. kept saying "entering recovery" but then the screen would go black, not boot into the recovery screen and then the phone would reboot as it would normally and go into stock OS
i then tried the following .img files below, all with the same result...
openrecovery-twrp-2.6.0.1-m7
openrecovery-twrp-2.6.0.0-m7
openrecovery-twrp-2.5.0.0-m7
recovery-clockwork-6.0.3.2-m7ul <<<---this was the only recovery .img file that would take so i then decided to play around with the options.
3) i then proceeded to make another ridiculous choice. under one of the options in clockwork recovery "classic" menus i went forth and selected the "wipe data/factory reset" option.
so what i have now is i believe a htc one sprint phone that has bootloader unlocked with what i believe is no OS. i hear on my computer the sound when it connects via "fastboot usb" but obviously the computer doesn't recognize it so i can copy and paste a zip file onto it.
i was looking at a few threads here and could really use some guidance/encouragement. the threads are
http://forum.xda-developers.com/showthread.php?t=2277892 <<< the FAQ sticky
http://forum.xda-developers.com/showthread.php?t=2368907 <<< the [ROM] stock sprint one 1.31.651.2 thread
http://forum.xda-developers.com/showthread.php?t=2368907 <<< the [RUU] sprint htc one 1.29.651.10 thread
what would be the best course of action for me to take? bear in mind that the end result would probably be obviously a working phone, probably stock or w/e seems best.
thank you for taking the time in reading my post. if you require any additional information, please ask. i am probably leaving out important pieces of info.
deadly
Click to expand...
Click to collapse
first off thats the wrong recovery, you want openrecovery-twrp-2.5.0.0-m7wls.img (this is for sprint the m7 is international)2.6 has been giving some problems, don't know if they have it worked out yet, 2.5 is good, so
deadlytwin said:
just tried wwjoshdew's directions. looks like i cant do the RUU 1.29xxxx. it goes through all the steps but at the end it says error because of the 1.31xxxx version i have already. i guess that means i have to wait until someone releases an RUU for 1.31.651.2
and if i am not sure if usb debugging mode ins enabled and i cant get back into normal bootup for the phone because i think i wiped my OS like stated in my first post. is my next step to do hansoon's AIO tool kit?
Click to expand...
Click to collapse
Use the tool I posted above and try to install htc drivers, install recovery and sideload a SPRINT rom. You could also try s-off and follow this guide for RUU on 1.31 if your still having trouble. http://forum.xda-developers.com/showthread.php?t=2390821
Konfuzion said:
Use the tool I posted above and try to install htc drivers, install recovery and sideload a SPRINT rom. You could also try s-off and follow this guide for RUU on 1.31 if your still having trouble. http://forum.xda-developers.com/showthread.php?t=2390821
Click to expand...
Click to collapse
appreciate it!
Update: yea my phone is not in usb debugging mode. ><
Aldo101t said:
first off thats the wrong recovery, you want openrecovery-twrp-2.5.0.0-m7wls.img (this is for sprint the m7 is international)2.6 has been giving some problems, don't know if they have it worked out yet, 2.5 is good, so
Click to expand...
Click to collapse
ill check this.
Update: im in recovery now. next step isnt looking so good ><
so this is starting to look bleak. i am now able to get into recovery but i cant do adb sideload. it fails. has it got to do with the possibility that usb debugging was not turned on before i wiped data?
any ideas on my next try?
deadlytwin said:
so this is starting to look bleak. i am now able to get into recovery but i cant do adb sideload. it fails. has it got to do with the possibility that usb debugging was not turned on before i wiped data?
any ideas on my next try?
Click to expand...
Click to collapse
go to file manager in twrp and see if there is an 0 folder at the top if so delete it(make sure its empty first) then try a sideload
or use es file explorer and look at your files
I have a Verizon DE moto x that has twrp recovery. My active display keeps getting stuck when I get a notification, so I think I need to flash (or however it must be done) a fresh rooted stock copy. Where can I find info on how to do this?
Sent from my XT1060
Since you aren't downgrading or anything, you won't have to worry about the bootloader, so just grab the Verizon 4.4 SBF and follow the instructions
mastarifla said:
Since you aren't downgrading or anything, you won't have to worry about the bootloader, so just grab the Verizon 4.4 SBF and follow the instructions
Click to expand...
Click to collapse
What is the difference between flashing firmware and flashing factory images?
Cozume said:
What is the difference between flashing firmware and flashing factory images?
Click to expand...
Click to collapse
As far as I know, the only verifiable "factory images" are the Developer Edition ones that Moto hosts on their personal website.
The SBF may/may not be official factory images. However, they are essentially accepted by the community as the next best thing, mainly because the zips follow the rules set by RSD Lite (Insider Moto Tool) and help prevent bad flashes/user error.
Flashing the SBF firmware manually (via fastboot commands) can raise a few problems of its own, if you don't know what you are doing you can cause serious damage to your device, which is why it is safer to use something like RSD Lite. If you are manually flashing, there is no "check" to verify that you installed them in the correct order or that you flashed all the files without missing anything. Therefore, it is much more risky, please know what you are doing if you plan on flashing this way.
mastarifla said:
As far as I know, the only verifiable "factory images" are the Developer Edition ones that Moto hosts on their personal website.
The SBF may/may not be official factory images. However, they are essentially accepted by the community as the next best thing, mainly because the zips follow the rules set by RSD Lite (Insider Moto Tool) and help prevent bad flashes/user error.
Flashing the SBF firmware manually (via fastboot commands) can raise a few problems of its own, if you don't know what you are doing you can cause serious damage to your device, which is why it is safer to use something like RSD Lite. If you are manually flashing, there is no "check" to verify that you installed them in the correct order or that you flashed all the files without missing anything. Therefore, it is much more risky, please know what you are doing if you plan on flashing this way.
Click to expand...
Click to collapse
Just to clarify. Using the rsd lite method will not mess with the boot loader nor the /media folder correct?
Sent from my XT1060
Swimboy46163 said:
Just to clarify. Using the rsd lite method will not mess with the boot loader nor the /media folder correct?
Sent from my XT1060
Click to expand...
Click to collapse
Depends on if you edit the xml file or not. The bootloader will be flashed by default and data will be wiped by default. It's been a while since I've used RSD but I think when it wipes /data it wipes everything (i.e. including /media). That being said, you could always take those steps out of the xml file.
piccit said:
Depends on if you edit the xml file or not. The bootloader will be flashed by default and data will be wiped by default. It's been a while since I've used RSD but I think when it wipes /data it wipes everything (i.e. including /media). That being said, you could always take those steps out of the xml file.
Click to expand...
Click to collapse
Will this work? http://www.youtube.com/watch?v=gDJvZe7_s0E
While yes it will work I would suggest learning HOW it works, take a look at the steps it goes through and see what is happening, don't rely on these kinds of tools, because they become useless if something bad happens. However, if you look at and modify the XML, it is literally only taking out a few lines of code, but if you want an automated version, then use the tool.
mastarifla said:
While yes it will work I would suggest learning HOW it works, take a look at the steps it goes through and see what is happening, don't rely on these kinds of tools, because they become useless if something bad happens. However, if you look at and modify the XML, it is literally only taking out a few lines of code, but if you want an automated version, then use the tool.
Click to expand...
Click to collapse
I can never get adb to run in command prompt. Mostly because windows is different from Mac.
Sent from my XT1060
Swimboy46163 said:
I can never get adb to run in command prompt. Mostly because windows is different from Mac.
Click to expand...
Click to collapse
I have a Windows 7 machine and I can never get adb to run in a command prompt, either. I have a driver problem.
I can only use mfastboot to do anything unless I can fix my driver problem.
Swimboy46163 said:
I can never get adb to run in command prompt. Mostly because windows is different from Mac.
Sent from my XT1060
Click to expand...
Click to collapse
There are a few tutorials for setting it up correctly, I'm not sure that you need the full SDK in order to do this, but I guess it's nice to have anyways. Try reading up a bit about it, I'm sure you can get it running in no time , after that you'll be much more familiar with these kinds of things.
OP, are you on 4.4? if so, then you don't have to worry about the bootloader. Just download the most current factory image from Motorola. The instructions for flashing the factory images are on their website. Go to www.motorola.com, go to the bottom of the page and click on "Developers". Its the same page you went to in order to get the bootloader unlock code. You have to request the factory image, and Motorola will email you a link, or there's several links to it floating around here.
The factory image will have the same bootlaoder version as you have installed as long as your are flashing the same OS version. It won't relock your bootloader, but you will lose root until you flash TWRP recovery. as far as the media partition, just back up your sdcard partition to your computer before flashing the factory image.
Here's the steps:
1. Plug your MX into the computer and back up all files you want to keep (photos, music, videos, downloads, etc...)
2. Download the 4.4 factory image from the source of your choice (If you don't get it from Motorola, make 100% sure you are downloading the correct file)
3. Make sure you have ADB and fastboot set up properly (and make sure you use the motorola fastboot (mfastboot.exe), bot the Google version)
4. Unzip the factory image and place all the files into the same folder as your adb and fastboot files.
5. Boot your MX into fastboot mode (power off, then hold all three buttons for approx 5 seconds and release)
6. Flash the files using mfastboot, and following the order provided in the included xml file.
7. Reboot.
8. Set your phone up and then restore the files you backed up to your computer
9. If you want root, then you will have to go back to fastboot and flash the TWRP recovery and let it install SuperSU.
10. Finally, PLEASE, make a nandroid back up once you have everything set up and before you make any alterations to it.
Thanks guys! The toolkit actually did the trick for me I was being lazy today lol
Sent from my XT1060 using Tapatalk
Swimboy46163 said:
Thanks guys! The toolkit actually did the trick for me I was being lazy today lol
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
Thanks buddy for ruining it for everybody. If you would stop being on your rag and complaining like a girl none if this would have happened. Look at what you did little girl.
MOTO X Slapped
I got notification just now that there was a 191M update to Android 5.0 on my Nexus 6. I wasn't thinking about TWRP when I tapped ok to install and of course it wouldn't since it's not the stock recovery. I flashed the stock recovery and tried to repeat the install but now the handset tells me I'm up to date.
I look at the factory image for the N6 (Shamu) and the build on Google's dev site is LRX21O but the build on the handset is LNX07M.
TWRP couldn't side load it with interaction and since the stock bootloader wasn't there .. anyone have a clue why the factory image and the installed image differ in build?
Very odd and I see nothing about an update in any thread here.
-Ben
aergern said:
I got notification just now that there was a 191M update to Android 5.0 on my Nexus 6. I wasn't thinking about TWRP when I tapped ok to install and of course it wouldn't since it's not the stock recovery. I flashed the stock recovery and tried to repeat the install but now the handset tells me I'm up to date.
I look at the factory image for the N6 (Shamu) and the build on Google's dev site is LRX21O but the build on the handset is LNX07M.
TWRP couldn't side load it with interaction and since the stock bootloader wasn't there .. anyone have a clue why the factory image and the installed image differ in build?
Very odd and I see nothing about an update in any thread here.
-Ben
Click to expand...
Click to collapse
An update hit mine the moment I took it out of the box (had to charge it). Did yours? I seem to remember it being around that size and I'm on LRX210 with mine. Yours probably just hadn't had the "day 1" update yet so you probably need that.
youareme7 said:
An update hit mine the moment I took it out of the box (had to charge it). Did yours? I seem to remember it being around that size and I'm on LRX210 with mine. Yours probably just hadn't had the "day 1" update yet so you probably need that.
Click to expand...
Click to collapse
I more or less have the same issue, my update didn't show up though until after i had unlocked/rooted/TWRP. So now i have a update noti that wont go away because i cant actually update it. I am just going to wait for a flashable ZIP for TWRP to be posted though
youareme7 said:
An update hit mine the moment I took it out of the box (had to charge it). Did yours? I seem to remember it being around that size and I'm on LRX210 with mine. Yours probably just hadn't had the "day 1" update yet so you probably need that.
Click to expand...
Click to collapse
I'll just flash the img files individually to the current Factory and reroot.
Thanks!
TacoLord187 said:
I more or less have the same issue, my update didn't show up though until after i had unlocked/rooted/TWRP. So now i have a update noti that wont go away because i cant actually update it. I am just going to wait for a flashable ZIP for TWRP to be posted though
Click to expand...
Click to collapse
I just booted into the bootloader and did the following ... and it all worked fine.
/usr/local/android/platform-tools/fastboot flash bootloader bootloader-shamu-moto-apq8084-71.05.img
/usr/local/android/platform-tools/fastboot flash radio radio-shamu-d4.0-9625-02.55.03a.img
/usr/local/android/platform-tools/fastboot flash boot boot.img
/usr/local/android/platform-tools/fastboot erase system
/usr/local/android/platform-tools/fastboot flash system system.img
./fastboot boot CF-Auto-Root-shamu-shamu-nexus6.img
The proper commands are in the 2 very short shell scripts included with the factory tarball. It was easy. It took maybe 10 minutes. The above .imgs are all you need. Do not do cache.img or userdata.img if you want to keep your apps and their data. The list above is correct in order that they need to be flash in and the commands are there. Have at it.
but this all still doesn't answer the op's original question...what is LNX07M? this is a new build different from the factory image just posted...
indianajonze said:
but this all still doesn't answer the op's original question...what is LNX07M? this is a new build different from the factory image just posted...
Click to expand...
Click to collapse
A quick google would suggest that LNX07M is the lollipop developer preview
so he was just pushed to his retail device the developer preview build?
Sounds like his phone came with the developer preview installed, and the initial update just took a few days to appear for him which he didn't manage to install so is still on the preview.
aergern said:
I just booted into the bootloader and did the following ... and it all worked fine.
/usr/local/android/platform-tools/fastboot flash bootloader bootloader-shamu-moto-apq8084-71.05.img
/usr/local/android/platform-tools/fastboot flash radio radio-shamu-d4.0-9625-02.55.03a.img
/usr/local/android/platform-tools/fastboot flash boot boot.img
/usr/local/android/platform-tools/fastboot erase system
/usr/local/android/platform-tools/fastboot flash system system.img
./fastboot boot CF-Auto-Root-shamu-shamu-nexus6.img
The proper commands are in the 2 very short shell scripts included with the factory tarball. It was easy. It took maybe 10 minutes. The above .imgs are all you need. Do not do cache.img or userdata.img if you want to keep your apps and their data. The list above is correct in order that they need to be flash in and the commands are there. Have at it.
Click to expand...
Click to collapse
Thanks! Im not great with ADB commands, but I gave it a shot. After the first line, I got "cannot open 'bootloader-shamu-moto-apq8084-71.05.img'"
Any suggestions on that! Really appreciated!
TacoLord187 said:
Thanks! Im not great with ADB commands, but I gave it a shot. After the first line, I got "cannot open 'bootloader-shamu-moto-apq8084-71.05.img'"
Any suggestions on that! Really appreciated!
Click to expand...
Click to collapse
It's a pathing issue most likely. I put all .img's into the same directory as the fastboot binary.
Sorry if I wasn't clear. I sometimes forget I've been doing ops like this since 2008.
TacoLord187 said:
Thanks! Im not great with ADB commands, but I gave it a shot. After the first line, I got "cannot open 'bootloader-shamu-moto-apq8084-71.05.img'"
Any suggestions on that! Really appreciated!
Click to expand...
Click to collapse
Phantom Shadow said:
A quick google would suggest that LNX07M is the lollipop developer preview
Click to expand...
Click to collapse
Searched Google for that build # .. I got a lot of references to the Nexus 5 which my tired brain refused to click on. I would have never imagined a dev. preview would ship on a prod new handset. I usually am pretty good at GTMFing.
aergern said:
It's a pathing issue most likely. I put all .img's into the same directory as the fastboot binary.
Sorry if I wasn't clear. I sometimes forget I've been doing ops like this since 2008.
Click to expand...
Click to collapse
Mind if I send a PM? Would rather not feel like im cluttering things!
(I have never actually updated this way before, haha)
TacoLord187 said:
Mind if I send a PM? Would rather not feel like im cluttering things!
(I have never actually updated this way before, haha)
Click to expand...
Click to collapse
Sure.
Hit me up. :good:
aergern said:
Sure.
Hit me up. :good:
Click to expand...
Click to collapse
It doesn't look like my messages went through (at least they are not showing up in my sent mail)
So just incase,
1. Where are the downloaded .img files stored
2. Where is the folder that I need to move them too?
3. EDITED OUT. Misread something
Thank you so much for your help!
Answers inline.
TacoLord187 said:
It doesn't look like my messages went through (at least they are not showing up in my sent mail)
So just incase,
1. Where are the downloaded .img files stored
You download the factory image tarball from Google's Android dev site. You then untar it wherever you like. I would probably untar it as root in /tmp/ then you can just mv the files to where you need them.
2. Where is the folder that I need to move them too?
The SDK is a zip file. You can unzip it wherever you like. I do this in /usr/local/ and then do a softlink to the directory it makes.
example: ln -s /usr/local/android <sdk directory>
I then cd into the tools directory and do this .. ./android which starts the UI so you can download the rest of the SDK. Do not bother with anything older than 4.4.4 packages.
I then move the img files from the factory image directory in /tmp to /usr/local/android/platform-tools/
You can then use the commands from the other post.
You can cat the install scripts for any syntax you might need but I think you'll find the commands I put in the other post to work for you.
3. Do I need to reroot/TWRP after? I can if needed, just want to be prepared!
Indeed you do. You can also move the CF img to the platform-tools directory. I would keep the tgz of the factory image somewhere else than /tmp in case you need it again.
Click to expand...
Click to collapse
aergern said:
Answers inline.
Click to expand...
Click to collapse
Looks like I got it all (rebooting now)! It just wasn't liking the paths as you said.
Thanks so much for your help!
TacoLord187 said:
Looks like I got it all (rebooting now)! It just wasn't liking the paths as you said.
Thanks so much for your help!
Click to expand...
Click to collapse
Awesome.
Well, with your ability to unzip the SDK and untar the factory image wherever you like ... I figured it was a pathing issue.
aergern said:
Awesome.
Well, with your ability to unzip the SDK and untar the factory image wherever you like ... I figured it was a pathing issue.
Click to expand...
Click to collapse
I have my adb set so I dont have to type the paths always. It just reads from a folder called android on my desktop (im on a mac). It normally works, but it wanted the paths for this one. Oh well. No big deal! Its updated and working!
Thanks again
aergern said:
Searched Google for that build # .. I got a lot of references to the Nexus 5 which my tired brain refused to click on. I would have never imagined a dev. preview would ship on a prod new handset. I usually am pretty good at GTMFing.
Click to expand...
Click to collapse
His phone might have been shipped that way as some people phones where shipped with Android 4.4.4.
So this is my first Nexus device. I'm coming from and S4 followed by a Note 3 so I'm kinda used to the samsung environment and don't want to screw anything up. I have a couple of questions.
First, if I root with CF-Auto Root, does the tool wipe all of the current data?
Second, how will rooting the phone affect the OTA updates and their availability?
Third, are the root apps already compatible with 5.0/Nexus 6?
Thank you!
Cf auto root does not remove all data per se, but unlocking your phone will if it is not.. And it's part of the process.
Rooting probably doesn't affect OTAs, and if it does, can easily be undone.
Yes, I haven't found a common root app that isn't compatible.
Dankchild said:
So this is my first Nexus device. I'm coming from and S4 followed by a Note 3 so I'm kinda used to the samsung environment and don't want to screw anything up. I have a couple of questions.
First, if I root with CF-Auto Root, does the tool wipe all of the current data?
Second, how will rooting the phone affect the OTA updates and their availability?
Third, are the root apps already compatible with 5.0/Nexus 6?
Thank you!
Click to expand...
Click to collapse
1. No it does not wipe your data unless your bootloader was locked.
2. It has no effect. You'll be able to accept the OTA and lose root (you can enable a survival script).
3. Yes.
Dankchild said:
So this is my first Nexus device. I'm coming from and S4 followed by a Note 3 so I'm kinda used to the samsung environment and don't want to screw anything up. I have a couple of questions.
First, if I root with CF-Auto Root, does the tool wipe all of the current data?
Second, how will rooting the phone affect the OTA updates and their availability?
Third, are the root apps already compatible with 5.0/Nexus 6?
Thank you!
Click to expand...
Click to collapse
some people here are wrong, will it wipe data? for the first time (when unlocking the OEM) yes. Lollipop now has a different way to check ROOTING, once it detects you modified ANY file in the system core files, it aborts. To work around this, either use a ROM and upgrade via FLASHING (which i do) or use NEXUS ROOT TOOLKIT. Using the toolkit (which is very noob friendly) allows everything to be done by a click. BUT, to upgrade via toolkit, (ota) you need to flash stock which in the toolkit completely wipe system, then unroot, then update, then reroot and flash whatever ROM you want, which would again wipe your device. the way i do it is easier, it requires no wiping and i get to keep my ROM at all times and i get earlier versions (depending on ROM creators) then OTA, i currently have 5.0.2 on my nexus 6, which isnt ven out yet OTA. :fingers-crossed:
TheSkillfulTroll said:
some people here are wrong, will it wipe data? for the first time (when unlocking the OEM) yes. Lollipop now has a different way to check ROOTING, once it detects you modified ANY file in the system core files, it aborts. To work around this, either use a ROM and upgrade via FLASHING (which i do) or use NEXUS ROOT TOOLKIT. Using the toolkit (which is very noob friendly) allows everything to be done by a click. BUT, to upgrade via toolkit, (ota) you need to flash stock which in the toolkit completely wipe system, then unroot, then update, then reroot and flash whatever ROM you want, which would again wipe your device. the way i do it is easier, it requires no wiping and i get to keep my ROM at all times and i get earlier versions (depending on ROM creators) then OTA, i currently have 5.0.2 on my nexus 6, which isnt ven out yet OTA. :fingers-crossed:
Click to expand...
Click to collapse
People modify the OTA zip to remove the abort of installation if any system files are modified/removed. Of course this can lead to problems, but can also be successful most of the times. Depends on what the user modifies.
Nexus Root Toolkits, I highly do not encourage users to use this. As easy as they are, they prevent users from learning about fastboot and adb. They are essential things to learn and relying on a program to do them for you is not good practice especially when it is quite easy to do it manually. If everybody used the toolkit then no body would understand how its done.
The part about custom ROMs, I recommend using custom ROMs. There are many to browse through, it depends on what you're looking for. Its very exciting to look at all the ROMs to select one to try, just to be eager to try another ROM for fun.
You can read more about toolkits @ http://forum.xda-developers.com/galaxy-nexus/general/dangers-tool-kits-one-click-root-t1469909
Very good read.
zephiK said:
People modify the OTA zip to remove the abort of installation if any system files are modified/removed. Of course this can lead to problems, but can also be successful most of the times. Depends on what the user modifies.
Nexus Root Toolkits, I highly do not encourage users to use this. As easy as they are, they prevent users from learning about fastboot and adb. They are essential things to learn and relying on a program to do them for you is not good practice especially when it is quite easy to do it manually. If everybody used the toolkit then no body would understand how its done.
The part about custom ROMs, I recommend using custom ROMs. There are many to browse through, it depends on what you're looking for. Its very exciting to look at all the ROMs to select one to try, just to be eager to try another ROM for fun.
You can read more about toolkits @ http://forum.xda-developers.com/galaxy-nexus/general/dangers-tool-kits-one-click-root-t1469909
Very good read.
Click to expand...
Click to collapse
the toolkit helps alot of new comers who have no idea on what to do, sure they can try the manual way, but doing so can end up very bad as its not easy to revert, while the toolkit helps by being able to bring you back from bricks. i started off using the toolkit and now i just use flashify for rom installations, if anything goes wrong (a brick) i just have tbe option to use the toolkit to set me back to pure stock and factory condition.
TheSkillfulTroll said:
the toolkit helps alot of new comers who have no idea on what to do, sure they can try the manual way, but doing so can end up very bad as its not easy to revert, while the toolkit helps by being able to bring you back from bricks. i started off using the toolkit and now i just use flashify for rom installations, if anything goes wrong (a brick) i just have tbe option to use the toolkit to set me back to pure stock and factory condition.
Click to expand...
Click to collapse
Its very easy to do manually, if it was a long and tedious step such as G1 rooting or manually exploiting a phone then a toolkit is reasonable.
For Nexus 6, its as simple as.
1. install drivers & fastboot.
2. bootloader mode (vol down + power)
3. fastboot oem unlock
4. fastboot flash recovery <name-of-recovery>.img
5. flash supersu
A very good sticky guide is posted, http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
And we all know that regardless if you use a Root Toolkit, you MUST read before you do anything.
Toolkit doesn't really help you bring you back from bricks, in fact I would argue that it does the opposite. You're relying on a program to do what you're supposed to do. In my experience of helping people in XDA forums, they've used toolkits and got themselves into bad positions and wasn't sure how to fix their problem or the toolkit soft-bricking their device. They had to learn fastboot / adb to resolve their issue.
Read the dangers of toolkits, they're not as fancy as people view it to be. Its not difficult to do the tasks manually. Very easy to do. I was able to root/unlock my N6 in a minute since I already had the environment set up.
Think of it this way, you have math homework. You can either go input it into the calculator and have the answer. Congrats, you have the answer but did you understand how they got to that step? No not really.
Its imperative for any user on XDA to learn the fastboot/adb step, its not difficult as I've mentioned time and time again. It takes some reading, but it'll save you time because later down the line you'll understand why you did what you did and you can get yourself out of situations instead of going to Q&A and asking for someone help on how to get back to factory or a soft-brick situation.
A snippet from the link above,
The people who are using these scripts aren't learning what is actually happening when they press 1 on their keyboard. Boom, their phone is unlocked, su-binaries and cwm recovery installed. Then, they flash a rom without creating a nandroid. What happens if something goes wrong and they didn't place any safety nets to help them? They post a thread saying their phone is bricked. People take time out of their day to help these people out, but since the user doesn't understand what the helper is talking about, they can't fix it.
Just last weekend I spent 30 minutes replying to a PM with step by step instructions how to flash stock images and including links to files and resources. The person replied back. Instead of fixing his phone himself, he said he "claimed his phone as stolen and will be getting sent a new one lol". WTF?! Not only is that morally wrong, it's also insurance fraud. And we wonder why carriers and OEM's are trying as hard as they can to lock down non-nexus phones.
Please, take the time to learn how to get yourself out of a mess before you are in a mess.
Click to expand...
Click to collapse
If someone can't take a couple minutes out of their time to follow a step-by-step guide then they shouldn't be tinkering with their device.
For information sake (I have already rooted via TK) your post actually does prove a point. For myself and maybe others, would you be willing to P.M me the instructions to do it via ADB/Fastboot just in case , I , myself get screwed over. Thanks Z
Sent from my Nexus 6 using XDA Free mobile app
flash you phone manually you will learn a lot about how the toolkits work.
I find it faster to flash manually than to use a tool kit.
once an OTA is available you can grap the image from the google site and flash the files manually.
There is a way to manually flash you phone and save userdata so you keep all your apps.
One you learn and get a little practice It will be so easy you will be able to flash like it is second nature. (I was a noob that came from iphone and jailbreaking)
I can actually flash the files manually faster that an OTA can update a phone and I type with maybe a total of 6 fingers. because i never took a typing class
zephiK said:
Its very easy to do manually, if it was a long and tedious step such as G1 rooting or manually exploiting a phone then a toolkit is reasonable.
For Nexus 6, its as simple as.
1. install drivers & fastboot.
2. bootloader mode (vol down + power)
3. fastboot oem unlock
4. fastboot flash recovery <name-of-recovery>.img
5. flash supersu
A very good sticky guide is posted, http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
And we all know that regardless if you use a Root Toolkit, you MUST read before you do anything.
Toolkit doesn't really help you bring you back from bricks, in fact I would argue that it does the opposite. You're relying on a program to do what you're supposed to do. In my experience of helping people in XDA forums, they've used toolkits and got themselves into bad positions and wasn't sure how to fix their problem or the toolkit soft-bricking their device. They had to learn fastboot / adb to resolve their issue.
Read the dangers of toolkits, they're not as fancy as people view it to be. Its not difficult to do the tasks manually. Very easy to do. I was able to root/unlock my N6 in a minute since I already had the environment set up.
Think of it this way, you have math homework. You can either go input it into the calculator and have the answer. Congrats, you have the answer but did you understand how they got to that step? No not really.
Its imperative for any user on XDA to learn the fastboot/adb step, its not difficult as I've mentioned time and time again. It takes some reading, but it'll save you time because later down the line you'll understand why you did what you did and you can get yourself out of situations instead of going to Q&A and asking for someone help on how to get back to factory or a soft-brick situation.
A snippet from the link above,
If someone can't take a couple minutes out of their time to follow a step-by-step guide then they shouldn't be tinkering with their device.
Click to expand...
Click to collapse
Can you provide to me instructions on a manual way? Like the other poster said I would like to learn to manually flash OEM unlucks and root and Roms (if possible) thanks Z! P.M ME if you decide to thanks!
Sent from my Nexus 6 using XDA Free mobile app
if you have drivers installed already from first link above then you can follow these steps:
Download the required factory image files to your computer and extract them
1) Create an empty directory. All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory; (it is easier this way)
2) If all you want to do is unlock your bootloader, skip to step 6 in this section.
3) Download the version of Android you want to your new directory. Make sure you are using a nexus 6 image.
4) Extract the files from within the .tgz file which you downloaded in step 3 using 7-zip, not WinZip or WinRAR or whatever.
5) Make sure you have extracted ALL the files (including extracting any files in any archives inside the .tgz file). You should have six (6) files ending with .img in the directory you created in step 1. The other files you extracted from the .tgz are not necessary;
6) Reboot your device into bootloader mode (by turning it off, hold volume down, and press and hold power) and plug it into your computer;
7) Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt. In Ubuntu just cd to the directory.
Type in the commands into the command prompt
1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-some-description-number.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-some-description-number.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Optional, but read note. Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: fastboot format cache
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked.
No you can root or decrypt. Search for directions on the forum or the internet.
I'm not the original writer of these instructions, but I found these helpful to people wanting the step by step instructions.
TheSkillfulTroll said:
Can you provide to me instructions on a manual way? Like the other poster said I would like to learn to manually flash OEM unlucks and root and Roms (if possible) thanks Z! P.M ME if you decide to thanks!
Click to expand...
Click to collapse
Read the first couple of posts of the following threads. The first talks about how to root, and the other, about how to flash the factory images. Very detailed.
http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
If someone can't take a couple minutes out of their time to follow a step-by-step guide then they shouldn't be tinkering with their device.
Click to expand...
Click to collapse
How true. I certainly don't want a paper weight...
Larzzzz82 said:
How true. I certainly don't want a paper weight...
Click to expand...
Click to collapse
Exactly, and if they believe that everything is magical and click on a button "yay I rooted, unlocked my bootloader." Sure you saved time by clicking a button rather than following a step-by-step guide which is quite easy, what happens when you encounter a problem like a soft brick? Questions on whether or not you can flash a older radio etc?
A toolkit can't do that for you, by finding out why something works this way will be better in the long run. I don't mind answering questions but what I do mind is when people use toolkits for something that is already so easy. For Samsung and other manufacturers that lock down their bootloaders, I fully understand why toolkits are needed because they are not unlockable via bootloader mode (unless its HTC, OnePlus, and some other exception) and requires a exploit to obtain root access (e.g. Towelroot).
For Nexus devices (and HTC/OnePlus/etc) devices where the company gave you a "fastboot oem unlock." Use it very simple to do. The hardest part is installing a driver and fastboot executable, which if you have a mac you don't even need the driver. Once you do it once, you're set for life on that computer. When I unlocked my N6, I just literally plugged it in... activated the OEM unlock via developer options and went into bootloader mode and typed fastboot oem unlock.
Finished that all in one minute.
zephiK said:
Exactly, and if they believe that everything is magical and click on a button "yay I rooted, unlocked my bootloader." Sure you saved time by clicking a button rather than following a step-by-step guide which is quite easy, what happens when you encounter a problem like a soft brick? Questions on whether or not you can flash a older radio etc?
A toolkit can't do that for you, by finding out why something works this way will be better in the long run. I don't mind answering questions but what I do mind is when people use toolkits for something that is already so easy. For Samsung and other manufacturers that lock down their bootloaders, I fully understand why toolkits are needed because they are not unlockable via bootloader mode (unless its HTC, OnePlus, and some other exception) and requires a exploit to obtain root access (e.g. Towelroot).
For Nexus devices (and HTC/OnePlus/etc) devices where the company gave you a "fastboot oem unlock." Use it very simple to do. The hardest part is installing a driver and fastboot executable, which if you have a mac you don't even need the driver. Once you do it once, you're set for life on that computer. When I unlocked my N6, I just literally plugged it in... activated the OEM unlock via developer options and went into bootloader mode and typed fastboot oem unlock.
Finished that all in one minute.
Click to expand...
Click to collapse
I agree the hardest part for me was on windows trying to get the stupid drivers to work correctly.
Dumped windows for Linux and followed the manual steps i found on XDA and never looked back.
No drivers needed in Linux either.
TheSkillfulTroll said:
some people here are wrong, will it wipe data? for the first time (when unlocking the OEM) yes. Lollipop now has a different way to check ROOTING, once it detects you modified ANY file in the system core files, it aborts. To work around this, either use a ROM and upgrade via FLASHING (which i do) or use NEXUS ROOT TOOLKIT. Using the toolkit (which is very noob friendly) allows everything to be done by a click. BUT, to upgrade via toolkit, (ota) you need to flash stock which in the toolkit completely wipe system, then unroot, then update, then reroot and flash whatever ROM you want, which would again wipe your device. the way i do it is easier, it requires no wiping and i get to keep my ROM at all times and i get earlier versions (depending on ROM creators) then OTA, i currently have 5.0.2 on my nexus 6, which isnt ven out yet OTA. :fingers-crossed:
Click to expand...
Click to collapse
Yes, this is my main concern. Back in my Samsung days, i remember flashing ROMs everyday, but the whole wiping got really annoying. When i got my Nexus 5 i just kept it stock. Now I do want to root to use the double tap to wake and the LED, but i don't want to wipe everytime there's an update. From what I remember, whenever you flash a ROM you have to wipe the phone. So is there a way around having to wipe your phone completely everytime there's an update?
miike1106 said:
Yes, this is my main concern. Back in my Samsung days, i remember flashing ROMs everyday, but the whole wiping got really annoying. When i got my Nexus 5 i just kept it stock. Now I do want to root to use the double tap to wake and the LED, but i don't want to wipe everytime there's an update. From what I remember, whenever you flash a ROM you have to wipe the phone. So is there a way around having to wipe your phone completely everytime there's an update?
Click to expand...
Click to collapse
Say you flashed SimpleAosp which is currently 5.0.2, whenever 5.0.3 comes out you need to Download it on your phone, open flashify and boot into TWRP, in there you need click install then DONT WIPE, find the updated version and flash over the current one, reboot and bam, you have new version and you didn't lose anything. Only do this method if you are transition from the same ROM to a new one, if you decided to go from SimpleAosp to liquidsmooth you need to wipe.
Sent from my Nexus 6 using XDA Free mobile app
TheSkillfulTroll said:
Say you flashed SimpleAosp which is currently 5.0.2, whenever 5.0.3 comes out you need to Download it on your phone, open flashify and boot into TWRP, in there you need click install then DONT WIPE, find the updated version and flash over the current one, reboot and bam, you have new version and you didn't lose anything. Only do this method if you are transition from the same ROM to a new one, if you decided to go from SimpleAosp to liquidsmooth you need to wipe.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Ah ok, this is what i was looking for.
miike1106 said:
Ah ok, this is what i was looking for.
Click to expand...
Click to collapse
Or... You could live dangerously and try a dirty flash first every time... Worst case... You go back and wipe in recovery
miike1106 said:
Yes, this is my main concern. Back in my Samsung days, i remember flashing ROMs everyday, but the whole wiping got really annoying. When i got my Nexus 5 i just kept it stock. Now I do want to root to use the double tap to wake and the LED, but i don't want to wipe everytime there's an update. From what I remember, whenever you flash a ROM you have to wipe the phone. So is there a way around having to wipe your phone completely everytime there's an update?
Click to expand...
Click to collapse
You can dirty flash but this is only the case when you update from the same ROM to a newer update of the version.
When we say wipe, it only wipes the OS not internal storage.